Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 312381 Details for
Bug 408753
openrc: syslog-ng, iptables, net circular init.d dependency
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
rc.log after adding lines to preup()
rc.log (text/plain), 7.35 KB, created by
Bent Bagger
on 2012-05-20 17:58:09 UTC
(
hide
)
Description:
rc.log after adding lines to preup()
Filename:
MIME Type:
Creator:
Bent Bagger
Created:
2012-05-20 17:58:09 UTC
Size:
7.35 KB
patch
obsolete
> >rc boot logging started at Sun May 20 19:49:24 2012 > > * Setting system clock using the hardware clock [UTC] ... > [ ok ] > * Loading module ipv6 ... > [ ok ] > * Loading module sit ... > [ ok ] > * Autoloaded 2 module(s) > * Checking local filesystems ... >/dev/sda1: clean, 302288/1001920 files, 1199623/2000084 blocks (check in 2 mounts) >/dev/sdb5: clean, 41997/611648 files, 192473/1222940 blocks >/dev/sdb6: clean, 75011/9043968 files, 7701058/18067092 blocks > [ ok ] > * Remounting root filesystem read/write ... > [ ok ] > * Updating /etc/mtab ... > [ ok ] > * Mounting local filesystems ... > [ ok ] > * Configuring kernel parameters ... > [ ok ] > * Creating user login records ... > [ ok ] > * Cleaning /var/run ... > [ ok ] > * Wiping /tmp directory ... > [ ok ] > * Setting terminal encoding [UTF-8] ... > [ ok ] > * Setting console font [default8x16] ... > [ ok ] > * Setting hostname to leopold ... > [ ok ] > * Setting keyboard mode [UTF-8] ... > [ ok ] > * Loading key mappings [us] ... > [ ok ] > * Bringing up interface lo > * Running preup ... > * start preup lo >Settings for lo: > Link detected: yes >1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > * end preup lo > * 127.0.0.1/8 ... > [ ok ] > * Adding routes > * 127.0.0.0/8 via 127.0.0.1 ... > [ ok ] > * Running postup ... > * Mounting USB device filesystem [usbfs] ... > [ ok ] > * Activating swap devices ... > [ ok ] > * Initializing random number generator ... > [ ok ] > >rc boot logging stopped at Sun May 20 19:49:39 2012 > > >rc default logging started at Sun May 20 19:49:39 2012 > > * ERROR: cannot start syslog-ng as net.eth0 would not start > * Loading ip6tables state and starting firewall ... >WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. > [ ok ] > * Loading iptables state and starting firewall ... >WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. > [ ok ] > * Bringing up interface eth0 > * Running preup ... > * start preup eth0 >Settings for eth0: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Advertised pause frame use: Symmetric > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric Receive-only > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: d > Current message level: 0x00000001 (1) > drv > Link detected: yes >2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 > link/ether 00:00:24:c8:db:2c brd ff:ff:ff:ff:ff:ff > inet6 fe80::200:24ff:fec8:db2c/64 scope link tentative > valid_lft forever preferred_lft forever > * end preup eth0 > * 192.168.19.6 ... > [ ok ] > * 2001:470:91c2:19::6/64 ... > [ ok ] > * fe80::19/64 ... > [ ok ] > * Waiting for IPv6 addresses ... > [ ok ] > * Running postup ... > * Bringing up interface eth1 > * Running preup ... > * start preup eth1 >Settings for eth1: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Advertised pause frame use: Symmetric > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: d > Current message level: 0x00000001 (1) > drv > Link detected: yes >3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 > link/ether 00:00:24:c8:db:2d brd ff:ff:ff:ff:ff:ff > inet6 fe80::200:24ff:fec8:db2d/64 scope link tentative > valid_lft forever preferred_lft forever > * end preup eth1 > * dhcp ... > * Running udhcpc ... > * start-stop-daemon: failed to start `/bin/busybox' > [ !! ] > [ !! ] > * Trying fallback configuration 86.48.99.37/24 broadcast 86.48.99.255 > * 86.48.99.37/24 ... > [ ok ] > * Adding routes > * default via 86.48.99.1 ... > [ ok ] > * Running postup ... > * 6to4 tunnel set up > * Bringing up interface eth2 > * Running preup ... > * start preup eth2 >Settings for eth2: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Advertised pause frame use: Symmetric > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: d > Current message level: 0x00000001 (1) > drv > Link detected: yes >4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 > link/ether 00:00:24:c8:db:2e brd ff:ff:ff:ff:ff:ff > inet6 fe80::200:24ff:fec8:db2e/64 scope link tentative > valid_lft forever preferred_lft forever > * end preup eth2 > * 192.168.20.6 ... > [ ok ] > * 2001:470:91c2:20::6/64 ... > [ ok ] > * fe80::20/64 ... > [ ok ] > * Adding routes > * 2001:470:91c2:20::/64 ... > [ ok ] > * Waiting for IPv6 addresses ... > [ ok ] > * Running postup ... > * Starting mysql ... > [ ok ] > * Starting named ... > * Checking named configuration ... > [ ok ] > [ ok ] > * Setting clock via the NTP client 'ntpdate' ... > [ ok ] > * Starting rpcbind ... > [ ok ] > * Starting NFS statd ... > [ ok ] > * Mounting network filesystems ... > [ ok ] > * Starting sshd ... > [ ok ] > * Starting apache2 ... >[Sun May 20 19:50:17 2012] [warn] NameVirtualHost *:80 has no VirtualHosts > [ ok ] > * Starting dhcpd ... > [ ok ] > * Starting ntpd ... > [ ok ] > * Starting dovecot ... > [ ok ] > * Starting Postgrey ... > [ ok ] > * Starting postfix (/etc/postfix) ... > [ ok ] > * Starting fetchmail ... > [ ok ] > * Starting mrouted ... > * WARNING: -a/--startas is deprecated and will be removed in the future, please use -x/--exec or -n/--name instead > [ ok ] > * Enabling IPv6 forwarding ... > [ ok ] > * Starting IPv6 Router Advertisement Daemon ... > [ ok ] > * Starting S.M.A.R.T. monitoring daemon ... > [ ok ] > * Doing udev cleanups > * Starting vixie-cron ... > [ ok ] > * Starting local > * (re)Starting syslog-ng ... > * Starting syslog-ng ... > [ ok ] > * done > [ !! ] > [ ok ] > >rc default logging stopped at Sun May 20 19:50:33 2012 >
<b>You cannot view the attachment while viewing its details because your browser does not support IFRAMEs. <a href="attachment.cgi?id=312381">View the attachment on a separate page</a>.</b>
View Attachment As Raw
Actions:
View
Attachments on
bug 408753
:
305813
|
305815
|
305829
|
305831
|
306559
|
306565
|
306657
|
307019
| 312381 |
312393
|
312415
