rc boot logging started at Sun May 20 19:49:24 2012 * Setting system clock using the hardware clock [UTC] ... [ ok ] * Loading module ipv6 ... [ ok ] * Loading module sit ... [ ok ] * Autoloaded 2 module(s) * Checking local filesystems ... /dev/sda1: clean, 302288/1001920 files, 1199623/2000084 blocks (check in 2 mounts) /dev/sdb5: clean, 41997/611648 files, 192473/1222940 blocks /dev/sdb6: clean, 75011/9043968 files, 7701058/18067092 blocks [ ok ] * Remounting root filesystem read/write ... [ ok ] * Updating /etc/mtab ... [ ok ] * Mounting local filesystems ... [ ok ] * Configuring kernel parameters ... [ ok ] * Creating user login records ... [ ok ] * Cleaning /var/run ... [ ok ] * Wiping /tmp directory ... [ ok ] * Setting terminal encoding [UTF-8] ... [ ok ] * Setting console font [default8x16] ... [ ok ] * Setting hostname to leopold ... [ ok ] * Setting keyboard mode [UTF-8] ... [ ok ] * Loading key mappings [us] ... [ ok ] * Bringing up interface lo * Running preup ... * start preup lo Settings for lo: Link detected: yes 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever * end preup lo * 127.0.0.1/8 ... [ ok ] * Adding routes * 127.0.0.0/8 via 127.0.0.1 ... [ ok ] * Running postup ... * Mounting USB device filesystem [usbfs] ... [ ok ] * Activating swap devices ... [ ok ] * Initializing random number generator ... [ ok ] rc boot logging stopped at Sun May 20 19:49:39 2012 rc default logging started at Sun May 20 19:49:39 2012 * ERROR: cannot start syslog-ng as net.eth0 would not start * Loading ip6tables state and starting firewall ... WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. [ ok ] * Loading iptables state and starting firewall ... WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. [ ok ] * Bringing up interface eth0 * Running preup ... * start preup eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000001 (1) drv Link detected: yes 2: eth0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:00:24:c8:db:2c brd ff:ff:ff:ff:ff:ff inet6 fe80::200:24ff:fec8:db2c/64 scope link tentative valid_lft forever preferred_lft forever * end preup eth0 * 192.168.19.6 ... [ ok ] * 2001:470:91c2:19::6/64 ... [ ok ] * fe80::19/64 ... [ ok ] * Waiting for IPv6 addresses ... [ ok ] * Running postup ... * Bringing up interface eth1 * Running preup ... * start preup eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000001 (1) drv Link detected: yes 3: eth1: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:00:24:c8:db:2d brd ff:ff:ff:ff:ff:ff inet6 fe80::200:24ff:fec8:db2d/64 scope link tentative valid_lft forever preferred_lft forever * end preup eth1 * dhcp ... * Running udhcpc ... * start-stop-daemon: failed to start `/bin/busybox' [ !! ] [ !! ] * Trying fallback configuration 86.48.99.37/24 broadcast 86.48.99.255 * 86.48.99.37/24 ... [ ok ] * Adding routes * default via 86.48.99.1 ... [ ok ] * Running postup ... * 6to4 tunnel set up * Bringing up interface eth2 * Running preup ... * start preup eth2 Settings for eth2: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000001 (1) drv Link detected: yes 4: eth2: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:00:24:c8:db:2e brd ff:ff:ff:ff:ff:ff inet6 fe80::200:24ff:fec8:db2e/64 scope link tentative valid_lft forever preferred_lft forever * end preup eth2 * 192.168.20.6 ... [ ok ] * 2001:470:91c2:20::6/64 ... [ ok ] * fe80::20/64 ... [ ok ] * Adding routes * 2001:470:91c2:20::/64 ... [ ok ] * Waiting for IPv6 addresses ... [ ok ] * Running postup ... * Starting mysql ... [ ok ] * Starting named ... * Checking named configuration ... [ ok ] [ ok ] * Setting clock via the NTP client 'ntpdate' ... [ ok ] * Starting rpcbind ... [ ok ] * Starting NFS statd ... [ ok ] * Mounting network filesystems ... [ ok ] * Starting sshd ... [ ok ] * Starting apache2 ... [Sun May 20 19:50:17 2012] [warn] NameVirtualHost *:80 has no VirtualHosts [ ok ] * Starting dhcpd ... [ ok ] * Starting ntpd ... [ ok ] * Starting dovecot ... [ ok ] * Starting Postgrey ... [ ok ] * Starting postfix (/etc/postfix) ... [ ok ] * Starting fetchmail ... [ ok ] * Starting mrouted ... * WARNING: -a/--startas is deprecated and will be removed in the future, please use -x/--exec or -n/--name instead [ ok ] * Enabling IPv6 forwarding ... [ ok ] * Starting IPv6 Router Advertisement Daemon ... [ ok ] * Starting S.M.A.R.T. monitoring daemon ... [ ok ] * Doing udev cleanups * Starting vixie-cron ... [ ok ] * Starting local * (re)Starting syslog-ng ... * Starting syslog-ng ... [ ok ] * done [ !! ] [ ok ] rc default logging stopped at Sun May 20 19:50:33 2012