Bug 556230 – >=sys-kernel/gentoo-sources-4.0.5: Bootup logo lost

• Status: RESOLVED TEST-REQUEST
• Product: Gentoo Linux

[Description Gerold Schellstede 2015-07-29 14:03:30 UTC]

Created attachment 407894 [details]
My .config

Hello,

recently I upgraded my kernel from the last stable one to the new stable one (gentoo-sources-4.0.5).

Everything works fine except the four little penguins on the left upper corner at the boot process. They are gone.

The new kernel .config was generated from the old one by "make oldconfig" and I use the intel framebuffer with KMS. Also using the newest kernel (4.1.3) does not bring them back. 

Best regards 
GOS

PS: I added my .config

[Comment 1 merlin 2015-10-06 08:26:28 UTC]

I confirm that. Not even noticed but looked at my config which is quite similar that Gerold's one.

[Comment 2 Gerold Schellstede 2015-10-06 09:21:14 UTC]

Same problem for gentoo-sources 4.1.6 and hardened-sources-4.1.6

[Comment 3 Gerold Schellstede 2015-10-06 12:04:02 UTC]

And same problem for the today updated hardened-sources 4.1.7-r1

[Comment 4 Gerold Schellstede 2015-11-06 18:02:00 UTC]

@merlin: Do you also use the intel framebuffer? Especially: Do you use the kernel option described in https://wiki.gentoo.org/wiki/Intel#Kernel ?

If not, which framebuffer do you use?

[Comment 5 Alice Ferrazzi 2017-04-29 15:08:26 UTC]

could you please try with a more recent kernel ?

[Comment 6 Gerold Schellstede 2017-04-29 18:13:40 UTC]

Thanks for the answer,

the problem is still alive with all stable kernels since my post and also with the actual stable kernels (hardened-sources-4.8x & gentoo-sources-4.9x).

Best regards

[Comment 7 Mike Pagano 2018-06-13 23:47:19 UTC]

I hate that we never solved this. 
Can you post your most recent .config file where you still don't see the logo ?

[Comment 8 Gerold Schellstede 2018-06-22 18:05:24 UTC]

Thanks for the answer! The problem still persists with the actual kernel 4.15.18 (gentoo)

[Comment 9 Gerold Schellstede 2018-06-22 18:06:03 UTC]

Created attachment 536806 [details]
My Kernel config for 4.15.18 (gentoo-sources)

[Comment 10 Mike Pagano 2018-06-22 23:51:26 UTC]

Can I see your dmesg after boot?

[Comment 11 Gerold Schellstede 2018-06-28 09:28:17 UTC]

Created attachment 537514 [details]
dmesg after boot -- excuse the late response

[Comment 12 Mike Pagano 2018-06-30 14:49:31 UTC]

Hi,  I see you are using inteldrmfb.

I did find this:

"To get the penguin logo on boot, you will need the vga=XXX to select a graphics mode that can support the penguin logo.

On my netbook with a 1024x600 screen that uses the i915 driver, I have the vga=789 line in /etc/lilo.conf as well as "video=inteldrmfb:mode=1024x600" as a kernel option in the "append =" string."

https://www.linuxquestions.org/questions/slackware-14/is-there-any-way-to-get-the-penguin-logo-on-boot-with-intel-kms-i915-driver-818326/