>>> Emerging (1 of 1) x11-drivers/nvidia-drivers-313.18 * NVIDIA-Linux-x86_64-313.18.run SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 3.7.6-gentoo-UEFI >>> Unpacking source... >>> Unpacking NVIDIA-Linux-x86_64-313.18.run to /var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work >>> Source unpacked in /var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work >>> Preparing source in /var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work ... * Converting /kernel/Makefile.kbuild to use M= instead of SUBDIRS= ... [ ok ] >>> Source prepared. >>> Configuring source in /var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work ... >>> Source configured. >>> Compiling source in /var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work ... * Preparing nvidia module make -j9 -s HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- 'LDFLAGS=-m elf_x86_64' ARCH=x86_64 IGNORE_CC_MISMATCH=yes V=1 SYSSRC=/usr/src/linux SYSOUT=/usr/src/linux CC=x86_64-pc-linux-gnu-gcc clean module If you are using a Linux 2.4 kernel, please make sure you either have configured kernel sources matching your kernel or the correct set of kernel headers installed on your system. If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option. Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option. *** Unable to determine the target kernel version. *** make: *** [select_makefile] Błąd 1 * ERROR: x11-drivers/nvidia-drivers-313.18 failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=x11-drivers/nvidia-drivers-313.18'`, * the complete build log and the output of `emerge -pqv '=x11-drivers/nvidia-drivers-313.18'`. * The complete build log is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/temp/environment'. * Working directory: '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work/kernel' * S: '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work/' >>> Failed to emerge x11-drivers/nvidia-drivers-313.18, Log file: >>> '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/temp/build.log' * Messages for package x11-drivers/nvidia-drivers-313.18: * ERROR: x11-drivers/nvidia-drivers-313.18 failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=x11-drivers/nvidia-drivers-313.18'`, * the complete build log and the output of `emerge -pqv '=x11-drivers/nvidia-drivers-313.18'`. * The complete build log is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/temp/environment'. * Working directory: '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work/kernel' * S: '/var/tmp/portage/x11-drivers/nvidia-drivers-313.18/work/' Reproducible: Always
norad / # emerge --info Portage 2.1.11.50 (default/linux/amd64/13.0, gcc-4.6.3, glibc-2.16.0, 3.7.4-gentoo-UEFI x86_64) ================================================================= System uname: Linux-3.7.4-gentoo-UEFI-x86_64-Intel-R-_Core-TM-_i7-3770K_CPU_@_3.50GHz-with-gentoo-2.2 KiB Mem: 32902436 total, 26861668 free KiB Swap: 0 total, 0 free Timestamp of tree: Thu, 07 Feb 2013 00:00:01 +0000 ld GNU ld (GNU Binutils) 2.23.1 app-shells/bash: 4.2_p42 dev-java/java-config: 2.1.12-r1 dev-lang/python: 2.7.3-r3, 3.2.3-r2 dev-util/cmake: 2.8.10.2-r1 dev-util/pkgconfig: 0.28 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.11.8 sys-apps/sandbox: 2.6 sys-devel/autoconf: 2.13, 2.69 sys-devel/automake: 1.11.6, 1.13.1 sys-devel/binutils: 2.23.1 sys-devel/gcc: 4.6.3 sys-devel/gcc-config: 1.8 sys-devel/libtool: 2.4.2 sys-devel/make: 3.82-r4 sys-kernel/linux-headers: 3.7 (virtual/os-headers) sys-libs/glibc: 2.16.0 Repositories: gentoo x-qnapi ACCEPT_KEYWORDS="amd64 ~amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=native -O2 -pipe -fomit-frame-pointer" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/polkit-1/actions /usr/share/themes/oxygen-gtk/gtk-2.0" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=native -O2 -pipe -fomit-frame-pointer" DISTDIR="/usr/portage/distfiles" FCFLAGS="-O2 -pipe" FEATURES="assume-digests binpkg-logs collision-protect config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync metadata-transfer multilib-strict news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch usersandbox usersync" FFLAGS="-O2 -pipe" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="pl_PL.utf8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" MAKEOPTS="-j9 -s" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage/qnapi" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="X a52 aac aacplus aacs acl acpi aio alsa amd64 amr ao apng aspell avx bdf bluray bzip2 cairo caps cdda cddb cdio cdparanoia chm cli consolekit corefonts crypt cryptsetup cups curl cxx dbus device-mapper dirac djbfft dri dts dvd ebook encode exif faac ffmpeg fftw flac fontconfig fpx g3dvl gcrypt gif gnutls gpm graphviz gstreamer gtkstyle gudev hdri http hwdb iconv icu id3tag idn imagemagick ipod ipv6 jpeg jpeg2k kde lame lcms libass libkms libmpeg2 libsamplerate libvisual lm_sensors lzma lzo mad minizip mjpeg mmap mms mmx mng modplug modules mozilla mp3 mpeg mplayer mudflap multilib musepack natspec ncurses netlink nettle network nls nptl nsplugin numa nut ogg openal opencl openexr opengl openmp openssl openvg osmesa pam pch pcre pdf perl-geoipupdate png policykit postproc postscript qt3support qt4 quicktime raw rdesktop readline rle rpc rtmp samba schroedinger session sftp smp sndfile sox speex spell sse sse2 sse4_1 ssl ssse3 svg symlink taglib tga theora threads thumbnail tidy tiff truetype twolame udev udisks unicode usb vaapi vcd vdpau vim-syntax vnc vorbis vpx wavpack webp windeco wmf x264 xa xanim xcomposite xine xinerama xml xmp xmpp xorg xpm xscreensaver xv xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" GRUB_PLATFORMS="efi-64" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="pl" PHP_TARGETS="php5-3" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_2" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
Created attachment 338178 [details] x11-drivers/nvidia-drivers-313.18 build.log
Same here
*** This bug has been marked as a duplicate of bug 447566 ***
