If you follow this guide and create e.g. a RAID 1 for /boot with metadata 0.9, but swap and / RAIDs with metadata 1.2 (mdadm default value), your system won't boot after installation. You have to manually assemble the RAID 1 for / in the Busybox shell of initramfs. However, you can circumvent this problem by adding "domdadm" to the kernel boot parameter list. The initramfs (which is created by genkernel) will then assemble all RAIDs according to the previously configured /etc/mdadm.conf. If you don't use genkernel, you must prepare your own initramfs in order to get a / with metadata 1.2 mounted at startup. An example of such initramfs is at: http://forums.gentoo.org/viewtopic-p-6767430.html Reproducible: Always Steps to Reproduce: 1. Build RAID 1 with metadata 0.9 for /boot 2. Build RAID 1 with metadata 1.2 for swap and / 3. Try to boot the system according to the RAID quickinstall guide
Actually, the guide mentions the use of 0.90 for / and /boot, which should work (I use it on my laptop without initramfs without problems). But I'll add the domdadm information to the guide.
Fixed in CVS. This should show up in an hour or so online.
