Works fine for me.
Created attachment 17648 [details]
new ebuild for nforce-net with kernel detection
I wrote a new nforce-net-1.0.256-r1.ebuild to take the new patch in account
I hope i did the attachment right.
I forgot to say you have to put the patch in .../nforce-net/file/nvnet.2.5-1.diff
do make the ebuild work.
Created attachment 17653 [details]
quickfixed I forgot the .o .ko issue
Created attachment 18883 [details, diff]
... And here is the patch. Works great for me, BTW (2.6.0-test6-mm4).
-- Daniel Mannarino
The ebuild's filename has to be "nforce-net-1.0.0256.ebuild" to work. The
patch applies fine and the module loads, but it doesn't seem to work. I can
set the IP address and bring the interface up, but it doesn't seem to do
any transmitting or receiving.
The NIC works under Linux 2.4.20 with the nvnet module.
Kernel: Linux 2.6.0-test6-mm4
Motherboard: Asus A7N8X-X
nvnet: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:00:04.0 to 64
nvnet: selecting duplex setting as auto duplex mode.
nvnet: selecting speed settings as auto-negotiation.
nvnet: Optimizing driver for CPU
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
00:04.0 Ethernet controller: nVidia Corporation: Unknown device 0066 (rev
Subsystem: Asustek Computer, Inc.: Unknown device 80a7
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d000 [size=8]
Capabilities:  Power Management version 2
eth1 Link encap:Ethernet HWaddr 00:0C:6E:46:D9:F2
inet addr:192.168.100.119 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:134 errors:0 dropped:0 overruns:0 frame:0
TX packets:198 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:20560 (20.0 Kb) TX bytes:8652 (8.4 Kb)
(eth0 is a pci realtek 8139)
*** Bug 21957 has been marked as a duplicate of this bug. ***
*** Bug 25282 has been marked as a duplicate of this bug. ***
*** Bug 31763 has been marked as a duplicate of this bug. ***
commited as nforce-net-1.0.261-r2, working fine here with kernel-2.6-test6,
please try this one jeroen
Works fine for me.
what about you jeroen?