Bug 247585 – app-office/openoffice-3.0.0 - checking for required Perl modules... is only avaliable with the XS version at /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 9

• Status: RESOLVED INVALID
• Product: Gentoo Linux

[Description Elias C. Diab 2008-11-19 14:27:26 UTC]

I updated to portage-2.2 (i think that's NOT the problem) and then i did an emerge -uDNvt world and failed to emerge app-office/openoffice-3.0.0. Every time i emerge -avt app-office/openoffice i get the same error.


Reproducible: Always

Steps to Reproduce:
emerge -avt app-office/openoffice every time gives that error.
Actual Results:  
checking for perl... /usr/bin/perl
checking the Perl version... checked (perl 5)
checking for required Perl modules...  is only avaliable with the XS version at /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 9
BEGIN failed--compilation aborted at /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 9.
Compilation failed in require at /usr/lib64/perl5/vendor_perl/5.8.8/Archive/Zip.pm line 24.
BEGIN failed--compilation aborted at /usr/lib64/perl5/vendor_perl/5.8.8/Archive/Zip.pm line 24.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
configure: error: Failed to find some modules
make: *** [stamp/build] Error 1
 * 
 * ERROR: app-office/openoffice-3.0.0 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 5494:  Called die
 * The specific snippet of code:
 *       make || die "Build failed"
 *  The die message:
 *   Build failed
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/app-office/openoffice-3.0.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-office/openoffice-3.0.0/temp/environment'.
 * 
!!! When you file a bug report, please include the following information:
GENTOO_VM=sun-jdk-1.6  CLASSPATH="" JAVA_HOME="/opt/sun-jdk-1.6.0.07"
JAVACFLAGS="-source 1.5 -target 1.5" COMPILER=""
and of course, the output of emerge --info

>>> Failed to emerge app-office/openoffice-3.0.0, Log file:

>>>  '/var/tmp/portage/app-office/openoffice-3.0.0/temp/build.log'

 * Messages for package app-office/openoffice-3.0.0:

 * 
 *  It is important to note that OpenOffice.org is a very fragile  
 *  build when it comes to CFLAGS.  A number of flags have already 
 *  been filtered out.  If you experience difficulty merging this  
 *  package and use agressive CFLAGS, lower the CFLAGS and try to  
 *  merge again. Also note that building OOo takes a lot of time and 
 *  hardware ressources: 4-6 GB free diskspace and 256 MB RAM are 
 *  the minimum requirements. If you have less, use openoffice-bin 
 *  instead. 
 * 
 *  Also if you experience a build break, please make sure to retry 
 *  with MAKEOPTS=-j1 before filing a bug. 
 * 
 * 
 *  To get a localized build, set the according LINGUAS variable(s). 
 * 
 * 
 * ERROR: app-office/openoffice-3.0.0 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 5494:  Called die
 * The specific snippet of code:
 *       make || die "Build failed"
 *  The die message:
 *   Build failed
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/app-office/openoffice-3.0.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-office/openoffice-3.0.0/temp/environment'.
 * 


Expected Results:  
emerged.

[Comment 1 Jeroen Roovers (RETIRED) 2008-11-20 18:43:15 UTC]

1) Please run perl-cleaner, then re-emerge openoffice.
2) If that doesn't help, post your `emerge --info' and reopen this bug report.

[Comment 2 Elias C. Diab 2008-11-20 19:18:55 UTC]

i did 'perl-cleaner all' and re-emerged openoffice

emerge --info here: 

Portage 2.2_rc14 (default/linux/amd64/2008.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.25-gentoo-r7 x86_64)
=================================================================
System uname: Linux-2.6.25-gentoo-r7-x86_64-Intel-R-_Core-TM-2_CPU_6400_@_2.13GHz-with-glibc2.2.5
Timestamp of tree: Wed, 19 Nov 2008 13:37:02 +0000
app-shells/bash:     3.2_p33
dev-java/java-config: 1.3.7, 2.1.6
dev-lang/python:     2.5.2-r7
dev-util/cmake:      2.4.6-r1
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.61-r2
sys-devel/automake:  1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.1-r1
sys-devel/binutils:  2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-march=nocona -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="52 X aac acl aiglx alsa amd64 aosss apache2 asf bash-completion berkdb bzip2 cairo cdr cgi cli cracklib crypt cups dbus dga dri dvd dvdr dvdread el encode fam fbcondecor ffmpeg firefoxmmx flac fortran gdbm gif glitz gnome gnutls gpm gstreamer gtk hal iconv id3tag ipv6 isdnlog java jpeg jpeg2k kde kdeenablefinal latex mad md5sum midi mmx modplug mp3 mp4 mudflap multilib musicbrainz mysql ncurses new-login nls nptl nptlonly ogg opengl openmp pam pcre pdf perl php plotutils png pppd python qt3 qt4 rar readline reflection reiserfs samba session spell spl sqlite srt sse sse2 ssl svg symlink sysfs tcpd tetex threads tiff truetype unicode vim-syntax wxwindows x264 xcb xcomposite xfce xine-lib xinerama xml xorg xscrennsaver xulrunner xv xvid xvmc zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

[Comment 3 nikos roussos 2008-12-09 23:50:11 UTC]

emerge virtual/perl-IO-Zlib and try again

[Comment 4 Andreas Proschofsky (RETIRED) 2009-01-11 19:43:02 UTC]

(In reply to comment #3)
> emerge virtual/perl-IO-Zlib and try again
> 

@Elias: Did you try that? Cause all that works fine here on multiple installations

[Comment 5 Clemente Aguiar 2009-02-21 20:49:54 UTC]

It is happening exactly the same thing here.

Have tried this to no avail:
# perl-cleaner reallyall
# emerge --oneshot virtual/perl-IO-Zlib
# emerge --oneshot virtual/perl-Compress-Raw-Zlib
# emerge --oneshot perl-core/Compress-Raw-Zlib

Here is the error:

checking the Perl version... checked (perl 5)
checking for required Perl modules... Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /etc/perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.8.8 /usr/lib64/perl5/vendor_perl /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.8 /usr/lib64/perl5/site_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib64/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
BEGIN failed--compilation aborted at /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
Compilation failed in require at /usr/lib64/perl5/vendor_perl/5.8.8/Archive/Zip.pm line 24.
BEGIN failed--compilation aborted at /usr/lib64/perl5/vendor_perl/5.8.8/Archive/Zip.pm line 24.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
configure: error: Failed to find some modules


And here is the environment:
----------------------------

GENTOO_VM=sun-jdk-1.6  CLASSPATH="" JAVA_HOME="/opt/sun-jdk-1.6.0.11"
JAVACFLAGS="-source 1.5 -target 1.5" COMPILER=""


Portage 2.1.6.4 (default/linux/amd64/2008.0/desktop, gcc-4.1.2, glibc-2.8_p20080602-r1, 2.6.27-gentoo-r8 x86_64)
=================================================================
System uname: Linux-2.6.27-gentoo-r8-x86_64-Intel-R-_Core-TM-2_Duo_CPU_E6750_@_2.66GHz-with-glibc2.2.5
Timestamp of tree: Thu, 19 Feb 2009 23:45:01 +0000
app-shells/bash:     3.2_p39
dev-java/java-config: 2.1.6-r1
dev-lang/python:     2.4.4-r13, 2.5.2-r7
dev-python/pycrypto: 2.0.1-r6
dev-util/cmake:      2.4.8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.63
sys-devel/automake:  1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils:  2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.27-r2
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -march=nocona -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=nocona -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="buildpkg distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="pt_PT.utf8"
LDFLAGS="-Wl,-O1"
LINGUAS="en pt pt_PT"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local/layman/sunrise"
SYNC="rsync://mero.madeiratecnopolo.pt/gentoo-portage"
USE="X aac acl acpi ads alsa amd64 avahi berkdb bluetooth branding bzip2 cairo cdr cli cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam ffmpeg firefox flac gdbm gif gnome gpm gstreamer gtk hal iconv ipv6 isdnlog ithreads java jpeg ldap libnotify mad midi mikmod mmx mp3 mpeg mudflap multilib ncurses nls nptl nptlonly nsplugin nvidia ogg opengl openmp pam pcre pdf perl png ppds pppd python qt3support quicktime readline reflection samba sdl session spell spl sse sse2 ssl ssse3 startup-notification svg sysfs tcpd theora threads tiff truetype unicode usb vorbis xml xorg xulrunner xv xvid xvmc zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en pt pt_PT" USERLAND="GNU" VIDEO_CARDS="nvidiai vga"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

[Comment 6 Torsten Veller (RETIRED) 2009-02-22 12:49:19 UTC]

Please check this:
`grep Zlib.pm /var/db/pkg/perl-core/Compress-{Raw-,}Zlib*/CONTENTS`

As it uses /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm,
I guess you didn't reinstall perl-core/Compress-Zlib .

If perl-cleaner (which version do you use?) doesn't reinstall this module,
i looks like a bug in perl-cleaner.

Thanks

[Comment 7 Clemente Aguiar 2009-02-22 16:48:45 UTC]

# grep Zlib.pm /var/db/pkg/perl-core/Compress-{Raw-,}Zlib*/CONTENTS

/var/db/pkg/perl-core/Compress-Raw-Zlib-2.015/CONTENTS:obj /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux/Compress/Raw/Zlib.pm d175f89916a241307ee92c9e52dd02c1 1235230688
/var/db/pkg/perl-core/Compress-Zlib-2.015/CONTENTS:obj /usr/lib64/perl5/vendor_perl/5.8.8/Compress/Zlib.pm d7aa340cb6079cf992cc90e233c445b9 1235246408

Used perl-cleaner version 1.05

After I reinstalled perl-core/Compress-Zlib and perl-core/Compress-Raw-Zlib the openoffice instalation proceed as normal.

So I guess the problem could be with perl-cleaner.

For your information this morning I did find a bug related with the perl "problem" (because I did add the USE="ithreads" flag):
see http://bugs.gentoo.org/show_bug.cgi?id=222767

[Comment 8 Guilhaume Bordiau 2009-04-23 18:21:09 UTC]

I confirm the exact same problem here. (amd64)
I had to reinstall perl-core/Compress-Zlib and perl-core/Compress-Raw-Zlib manually.

# perl-cleaner reallyall does nothing. (v1.05)

So it's a perl-cleaner bug and not openoffice. Someone should change this bug assignment from [e-mail] to [e-mail]

[Comment 9 Rafał Mużyło 2009-05-15 23:12:57 UTC]

Perhaps not.
I've run into similar problem after I reinstalled
perl 5.10.0. For me, it was urxvt complaining about
that weaken stuff. I didn't really know what to do,
but once I reemerged libperl, things got fixed.

Not 100% sure that was it (but about 85%) and don't really 
know why this could work.

[Comment 10 Andreas Proschofsky (RETIRED) 2009-11-25 12:36:23 UTC]

This really isn't a OOo problem, if you still get such behaviour, please assign it to the perl-herd