Hardware: Athlon1000 on Asus A7V, GF3Ti200 Symptom: Loading of X-Driver fails with "unresolved symbols" --- cut from XFree86.0.log --- (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz Symbol fbWinPrivateIndex from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbPictureInit from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbValidateGC from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is u nresolved! Symbol fbGCPrivateIndex from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbCreateGC from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unr esolved! Symbol fbCreateWindow from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbWinPrivateIndex from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbWinPrivateIndex from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! Symbol fbCloseScreen from module /usr/X11R6/lib/modules/drivers/nvidia_drv.o is unresolved! --- /cut from XFree86.0.log --- Additional info: Kernel module was properly loaded at that point of time Reproducible: Always Steps to Reproduce: 1. Boot the CD on hardware stated above and wait
it also happens on a duron 700@940 on a asus a7v133 with a leadtek geforce2 mx64 aka 100/200
I also get a simmilar problem with the America's Army Live CD that was just released. I have an Athlon 1333 MHz with a GeForce4 Ti4800SE.
Same problem happening here. Athlon 1200 GeForce 2 GTS/Pro Americas Army LiveCD 1.4_rc4 (aa-20030513.iso)
could you please try the livecd by typing nofb by itself at the prompt note: not "gentoo nofb"
nofb took the gui out of the boot process, but the unresolved symbols still killed the server with a "Caught signal 4. Signal aborting" The only other warning in the log is NVIDIA(0): Failure reading EDID parameters for display device CRT-0 which I assume is because I use an LCD. Also, the 1.4_rc1 UT Demo LiveCD worked fine on this exact same system (no hardware changes since then).
I also get a Signal 4 on the America's Army CD -- aa-20030515 Live CD. Same situation, and I can't even get a command line after the crash.
Is there any additional information we can provide the developers so that this can get fixed?
I don't have any addtional infromation at this time other than I do not recieve any EDID errors because I use a CRT and not a flatpanel.
Created attachment 14895 [details] /var/log/XFree86.0.log Similar problem. I have a gforce2mx. I'll attach my /var/log/XFree86.0.log
looks like a prob with the nvidia drivers included on the livecd. I don't know if there are plans to rebuild this livecd, but livewire would be the one to talk to. closing since I am not sure if we still support these cds