Renaming the 0.0.2 ebuild works fine. Perhaps consider adding a post install message informing about how to activate the call monitor, like mentioned in the readme file: To enable this feature you have to dial "#96*5*" with a telephone connected to the Fritz!Box. This works for all firmware versions >= xx.03.99 You may experience problems when trying to dial "#96*5*" with an ISDN telephone. In such a case try to activate "auto keypad", "dial * and #" or some similar setting in your ISDN telephone. If your ISDN telephone contains no keypad support simply use an analogue telephone instead. Reproducible: Always
We all (2) have little time for this. It definitly gets faster done if someone attaches a working (!) ebuild / or a diff to the existing ebuild. :) Or should we really just copy the two paragraphs into the message part of the ebuild?
Created attachment 128341 [details] vdr-fritzbox-0.0.5.ebuild Sorry it took me so long, so here's a working ebuild for the current version with an added pkg_postinst() providing a short explanation about how to activate the Fritz!Box call monitor. Could probably be better worded, but better than nothing.
I have added the last workin Version vdr-fritzbox-0.0.8 0.0.9 have a lot of compile Problems (German) --> http://www.vdr-portal.de/board/thread.php?postid=668441#post668441 comile test under vdr-1.4.7-r7 and vdr-1.5.11-r1
