I just upgraded udev-087-r1 to udev-103 and now the acx kernel module (net-wireless/acx) fails most of the times to load. Some times, after multiple rmmods and modprobes, it loads OK (say one OK for 5 to 10 NOK) and so provide a usable net.wlan0 iface: Since i never had this problem before, i suspect udev to be guilty here, or at least that it reveals a pre-existing problem in acx. But as i kown nothing about udev, it may have nothing to do with this, it just seems to to me since it is the only package i upgraded. --------- FAILURE log acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them PCI: Enabling device 0000:03:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:03:00.0 to 64 acx: found ACX100-based wireless network card at 0000:03:00.0, irq:11, phymem1:0xF6010000, phymem2:0xF6000000, mem1:0xf89ac000, mem1_size:4096, mem2:0xf8a80000, mem2_size:65536 acx: firmware image 'tiacx100c11' was not provided. Check your hotplug scripts acx: firmware image 'tiacx100' was not provided. Check your hotplug scripts acx: reset_dev() FAILED ACPI: PCI interrupt for device 0000:03:00.0 disabled acx_pci: probe of 0000:03:00.0 failed with error -5 ------------ ----------- SUCCESS LOG acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them PCI: Enabling device 0000:03:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 acx: found ACX100-based wireless network card at 0000:03:00.0, irq:11, phymem1:0xF6010000, phymem2:0xF6000000, mem1:0xf8ade000, mem1_size:4096, mem2:0xf8c20000, mem2_size:65536 acx: firmware image 'tiacx100c11' was not provided. Check your hotplug scripts NVS_vendor_offs:0000 probe_delay:500 eof_memory:65536 CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01 AntennaID:00 Len:02 Data:01 02 PowerLevelID:01 Len:02 Data:001E 000A DataRatesID:02 Len:05 Data:02 04 11 22 44 DomainID:03 Len:06 Data:30 20 30 31 32 41 ProductID:04 Len:09 Data:TI ACX100 ManufacturerID:05 Len:07 Data:TI Test acx: form factor 0x00 (unspecified), radio type 0x11 (RFMD), EEPROM version 0x04, uploaded firmware 'Rev 1.9.8.b' (0x01020505) acx v0.3.35: net device wlan0, driver compiled against wireless extensions 20 and Linux 2.6.18-gentoo-r3 ------------ ------------ EMERGE INFO Portage 2.1.1-r2 (default-linux/x86/2006.0, gcc-3.4.6, glibc-2.3.6-r5, 2.6.18-gentoo-r3 i686) ================================================================= System uname: 2.6.18-gentoo-r3 i686 Intel(R) Pentium(R) M processor 1700MHz Gentoo Base System version 1.12.6 Last Sync: Wed, 29 Nov 2006 01:50:01 +0000 distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [enabled] ccache version 2.3 [enabled] app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.3.7, 2.0.30 dev-lang/python: 2.4.3-r4 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: 2.3 dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.60 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r4 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.17-r1 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=pentium-m -O2 -pipe -fomit-frame-pointer" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /opt/openjms/config /usr/share/X11/xkb" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo" CXXFLAGS="-march=pentium-m -O2 -pipe -fomit-frame-pointer" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig buildpkg ccache collision-protect distcc distlocks fixpackages metadata-transfer parallel-fetch sandbox sfperms strict userfetch userpriv usersandbox" GENTOO_MIRRORS="http://ftp.club-internet.fr/pub/mirrors/gentoo/ http://mirror.ovh.net/gentoo-distfiles/ http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo/ http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo/" LANG="en_US.ISO-8859-15" LINGUAS="en fr" MAKEOPTS="-j3" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_EXTRA_OPTS="--human-readable" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage /usr/portage/local/layman/sunrise" SYNC="rsync://bee/gentoo-portage" USE="x86 X a52 aac acpi alsa apache2 asf bash-completion berkdb bitmap-fonts bzip2 cairo caps cddb cdr cjk cli cracklib crypt cups curl dlloader dri dv dvd dvdread elibc_glibc emboss encode expat fam ffmpeg flac foomaticdb fortran freetype gdbm gif gimp gmp gnutls gstreamer gtk gtk2 gtkhtml iconv imagemagick imap imlib input_devices_evdev input_devices_keyboard input_devices_mouse input_devices_synaptics isdnlog java javamail jbig jms jmx jpeg kernel_linux lcms libg++ libwww linguas_en linguas_fr lzo mad maildir matroska mikmod mmx mmxext mng mp3 mpeg mysql ncurses network nls nptl ogg oggvorbis opengl pam pcmcia pcre perl php pic png pppd python quicktime readline real reflection ruby sdl session sndfile speex spl sqlite sse sse2 ssl startup-notification svg tcltk tcpd tga theora threads tiff truetype truetype-fonts type1-fonts udev unicode usb userland_GNU v4l v4l2 video_cards_radeon vorbis win32codecs wma wmf wxwindows xml xml2 xorg xv xvid zlib" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS -----------
*** This bug has been marked as a duplicate of 147006 ***
