I updated to actual modular xorg-x11. Unfortunately it doesn't start, since it doesn't load the fonts. I don't use any font-server on my system Xorg's log say at the end: Fatal server error: could not open default font 'fixed' There are a few other errors in Xorgs log too, including: (II) LoadModule: "xtrap" (WW) Warning, couldn't open module xtrap (II) UnloadModule: "xtrap" (EE) Failed to load module "xtrap" (module does not exist, 0) Reproducible: Always Steps to Reproduce: 1.unmerge old Xorg 2. unmask all all modular Xorg 3.reinstall Xorg-X11 4. Xorg refuse to start.
Created attachment 72636 [details] xorgs-log
Created attachment 72637 [details] xorg.xonf
Run these: equery list font-misc-misc equery list encodings equery list font-alias ls /usr/share/fonts/misc/fonts.* As for xtrap, that'll probably be fixed soon. Until then, you could just remove the Load "xtrap" line from your config.
media-fonts/font-misc-misc is installed, but X11-apps/bdftopcf as dependency was not installed... encodings are installed... media-fonts/font-alias-0.99.0 are also installed ls /usr/share/fonts/misc/fonts.* /usr/share/fonts/misc/fonts.cache-1 /usr/share/fonts/misc/fonts.dir Seems OK... Additional information: On the console, there an perhaps important error-message: expected keysym, got dead_diaresis: line 143 of pc/de The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Could not init font path element /usr/share/fonts/artwiz, removing Fatal server error: could not open default font 'fixed' XIO: fatal IO error 104 (Connection reset by peer) on X server ":3 after 0 requests (0 known processed) with 0 events remaining.
I didn't see anything specific upstream, but give RC2 a try once rsync is ready in 30mins to an hour or so.
(In reply to comment #4) > media-fonts/font-misc-misc is installed, but X11-apps/bdftopcf as dependency > was not installed... > encodings are installed... > media-fonts/font-alias-0.99.0 are also installed > > ls /usr/share/fonts/misc/fonts.* > /usr/share/fonts/misc/fonts.cache-1 > /usr/share/fonts/misc/fonts.dir > > Seems OK... You're missing fonts.alias, among other things. Try reinstalling font-alias. Also make sure you've got mkfontscale and mkfontdir installed.
Updated to latest xorg and reinstalled several other font packages. It's working now.. My working/compiliation directory is not in /var/tmp/portage, it's in the /usr/portage/distfiles/tmp directory (disk-space). During compilation at this location there were several warnings on the screen (ECCLASS...), but it compiled thru. This warnings disappeared after changing the working-directory to it's usual point. I need to reinstall: media-fonts/font-misc-misc (and manually media-fonts/utils since font-misc-misc requires an acual fonts/utils) fonts-encodings media-fonts/font-cursor-misc Then X starts normally. However, there are a lot of fonts (helvetica..) still missing, need to reemerge them too
> and manually media-fonts/utils since font-misc-misc > requires an acual fonts/utils You mean it requires it at runtime? It's currently set as a build-time dep in the ebuild.
(In reply to comment #8) > You mean it requires it at runtime? It's currently set as a build-time dep in > the ebuild. Nah, it seems like there must be some portage bug hiding somewhere because people have repeatedly not had the font tools installed, even though they're in the dep list.
from bug #112588 have problems with X11-apps/bdftopcf wrote what problems with libXfont.so.1 - unresolved simbol Client
i see it was problem in updating libXfont how i looks emerge don't remove old libraries :( then i do emerge -C libXfont ; rm -rf /usr/lib/libXfont* and reemerging libXfont and X11-apps/bdftopcf all works fine.
Changing FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" to FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" solved the problem for me.
(In reply to comment #12) > Changing > > FontPath "/usr/share/fonts/misc:unscaled" > FontPath "/usr/share/fonts/75dpi:unscaled" > FontPath "/usr/share/fonts/100dpi:unscaled" > > to > > FontPath "/usr/share/fonts/misc" > FontPath "/usr/share/fonts/75dpi" > FontPath "/usr/share/fonts/100dpi" > > solved the problem for me. In that case, pull the fix I did for fdo bug 5047.
Thanks Adam, added. Steffen, please post your 'emerge info'. I'd like to see if we can track down this issue with the utils not getting installed.
emerge info reports the following: ================================================================= System uname: 2.6.13-gentoo-r5 i686 Pentium III (Coppermine) Gentoo Base System version 1.6.13 distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] dev-lang/python: 2.3.5-r2, 2.4.2 sys-apps/sandbox: 1.2.12 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.20 virtual/os-headers: 2.6.11-r3 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=pentium3 -O2 -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/kde/3/share/config /usr/share/X11/xkb /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/texmf/web2c /etc/env.d" CXXFLAGS="-march=pentium3 -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig buildpkg ccache distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/Linux/distributions/gentoo" LANG="de_DE@euro" LC_ALL="de_DE@euro" LINGUAS="de" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 S3TC X a52 aac aalib acl acpi alsa audiofile avi bash-completion berkdb bitmap-fonts bluetooth bzip2 ccache cdparanoia cdr commercial crypt css cups curl dga dillo directfb divx4linux dlloader dri dvb dvd dvdr dvdread dxr3 eds emboss encode esd ethereal exif expat fam ffmpeg flac foomaticdb gd gdbm geoip gif gimp gimpprint glut gmp gphoto2 gpm gstreamer gtk gtk2 guile hbci idn imagemagick imap imlib insecure-drivers ipv6 irda java javascript jpeg jpeg2k junit kcal kde kdeenablefinal kqemu lcms ldap libcaca libg++ libwww lirc ltsp mad madwifi matroska mhash mikmod mng mp3 mpeg mpeg2 mplayer mysql ncurses nls nptl nsplugin ntlm ogg oggvorbis opengl oss pam pcmcia pcre pdf pdflib perl php png pnp ppds python qt quicktime readline ruby samba scanner sdl slang speex spell sql sqlite ssl svg svga tcltk tcpd tetex theora thumbnail tidy tiff truetype truetype-fonts type1-fonts udev unicode usb v4l vcd vidix vorbis wifi win32codecs xine xinerama xml xml2 xmms xv xvid xvmc zeo zlib video_cards_savage linguas_de userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LDFLAGS
You cut off the Portage version, which is partially what I was interested in :P
Sorry... Portage 2.0.51.22-r3 (default-linux/x86/2005.0, gcc-3.4.4, glibc-2.3.5-r2, 2.6.13-gentoo-r5 i686)
(In reply to comment #6) > (In reply to comment #4) > > media-fonts/font-misc-misc is installed, but X11-apps/bdftopcf as dependency > > was not installed... > > encodings are installed... > > media-fonts/font-alias-0.99.0 are also installed > > > > ls /usr/share/fonts/misc/fonts.* > > /usr/share/fonts/misc/fonts.cache-1 > > /usr/share/fonts/misc/fonts.dir > > > > Seems OK... > > You're missing fonts.alias, among other things. Try reinstalling font-alias. > Also make sure you've got mkfontscale and mkfontdir installed. I don't know if this is related to the problems had here, but the latest update to font-alias has a patch meant to install the font.alias files to /usr/share/fonts, however, the patch doesn't work and the aliases get installed to /usr/lib/X11/fonts, causing a fixed font not to be found. Manually coping /usr/lib/X11/fonts/misc/fonts.alias to /usr/share/fonts/misc/fonts.alias got X to find a fixed font again.
(In reply to comment #18) > I don't know if this is related to the problems had here, but the latest update > to font-alias has a patch meant to install the font.alias files to > /usr/share/fonts, however, the patch doesn't work and the aliases get installed > to /usr/lib/X11/fonts, causing a fixed font not to be found. Manually coping > /usr/lib/X11/fonts/misc/fonts.alias to /usr/share/fonts/misc/fonts.alias got X > to find a fixed font again. Huh. Somehow a patch broke. I'll get that fixed up.
Upgrading to Xorg7-rc4 and many 1.0.0 ebuilds in font related section makes this bug happening again. libXfontcache-1.0.0 didnt get emerged - a dependency which is required to start X. So the Bug is there again. kind regards
Torsten: 1) Are you updating your system with 'emerge -uavDN world' (update, ask, verbose, deep, newuse)? 2) libXfontcache isn't installed on my system and I don't have any issues. 3) What Portage version are you using?
Yes i did a -vDNu world - no ask, but that shouldnt matter here. I am using portage in version 2.0.53, but i i am going to unmerge libXfontCache its broken again. kind regards
(In reply to comment #22) > Yes i did a -vDNu world - no ask, but that shouldnt matter here. > > I am using portage in version 2.0.53, but i i am going to unmerge libXfontCache > its broken again. > > kind regards > ok, i tried it - unmerged it and now it still works, but before merging i cant get it working, very mysterious. fc-cache -f was done but none default font fixed could be found when the error occured, after merging libXfontCache it worked. hm ok its done for now - up to the next occurence ;) kind regards
This bug still exist, I have a fresh new install from stage1, after all system packages have been emerged (aboud 108 package with -X), then I changed -X to X, so, I start emerge xorg-x11-7.0 final, after all emerged, Xorg still told me she can not find the font 'fixed'. I'm very sure, if system has no xorg, then emerge xorg-x11 will not emerge libXfontcache. And also, I have emerged the encoding, font-util font-misc-misc, font-alias, because these package are installed by the dependences of xorg-x11-7.0. I spend 2 days tring to start from stage1 with 2 computers, problem is the same! this is a big problem!!!!
also, I need to say, there is only one error in the log of xorg, that is xorg can not find the fixed font. no warning at all.
(In reply to comment #24) > I'm very sure, if system has no xorg, then emerge xorg-x11 will not emerge > libXfontcache. It shouldn't. As I stated above, I don't have this library installed and everything works fine. Please post your xorg.conf.
these are my xorg.conf # File generated by xorgconfig. # # Copyright 2004 The X.Org Foundation # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of The X.Org Foundation shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from # The X.Org Foundation. # # ********************************************************************** # Refer to the xorg.conf(5x) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the font modules Load "type1" # Load "speedo" Load "freetype" # Load "xtt" # This loads the GLX module # Load "glx" # This loads the DRI module # Load "dri" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/share/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/Type1" # FontPath "/usr/lib/X11/fonts/local/" # FontPath "/usr/lib/X11/fonts/misc/" # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/lib/X11/fonts/Speedo/" # FontPath "/usr/lib/X11/fonts/Type1/" # FontPath "/usr/lib/X11/fonts/TrueType/" # FontPath "/usr/lib/X11/fonts/freefont/" # FontPath "/usr/lib/X11/fonts/75dpi/" # FontPath "/usr/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc105" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for Xorg # Option "XkbRules" "xorg" # Option "XkbModel" "pc105" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "Auto" # IntelliMouse PS/2 Option "Device" "/dev/input/mice" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Mouse-speed setting for PS/2 mouse. # Option "Resolution" "256" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5, # horizontal wheel to buttons 6 & 7. Change if your mouse has more than # 3 buttons and you need to map the wheel to different button ids to avoid # conflicts. Option "ZAxisMapping" "4 5 6 7" # Emulate3Buttons is an option for 2-button mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the xorg.conf man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "ADI MicroScan 955" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-96 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-160 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xorgconfig: Section "Device" Identifier "NVIDIA GeForce 6800GT" Driver "nv" #VideoRam 262144 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "NVIDIA GeForce 6800GT" Monitor "ADI MicroScan 955" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection # Section "DRI" # Mode 0666 # EndSection and my xorg.log X Window System Version 7.0.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 7.0 Build Operating System:Linux 2.6.14-gentoo-r5 i686 Current Operating System: Linux steve 2.6.14-gentoo-r5 #1 SMP PREEMPT Thu Dec 29 01:30:47 CST 2005 i686 Build Date: 29 December 2005 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 31 13:14:50 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "ADI MicroScan 955" (**) | |-->Device "NVIDIA GeForce 6800GT" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/75dpi"). (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/100dpi"). (**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/TTF,/usr/share/fonts/Type1" (**) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2578 card 1458,2578 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2579 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:03:0: chip 8086,257b card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24d2 card 1458,24d2 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 1458,24d2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 1458,24d2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 1458,24d2 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 1458,5006 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 1458,24d2 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24df card 1458,24df rev 02 class 01,04,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 1458,24d2 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 1458,a002 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0045 card 0000,0000 rev a1 class 03,00,00 hdr 00 (II) PCI: 02:01:0: chip 8086,1019 card 1458,e000 rev 00 class 02,00,00 hdr 00 (II) PCI: 03:0a:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf8000000 - 0xfaffffff (0x3000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:3:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B] [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B] [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfb000000 - 0xfcffffff (0x2000000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0x50000000 - 0x500fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xfd000000 - 0xfd0fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV40 [GeForce 6800 GT] rev 161, Mem @ 0xf8000000/24, 0xe0000000/28, 0xf9000000/24 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff (II) Active PCI resource ranges: [0] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [1] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [2] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [3] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [4] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [5] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [6] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [7] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [11] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [12] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [15] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [16] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [17] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [18] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [19] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [20] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [22] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [23] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [24] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [25] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [1] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [2] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [3] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [4] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [5] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [6] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [7] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [11] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [12] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [15] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [16] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [17] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [18] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [19] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [20] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [22] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [23] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [24] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [25] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [6] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [7] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [8] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [9] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [10] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [11] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [12] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [13] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [14] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [15] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [16] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [20] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [22] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [23] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [24] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [25] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [27] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [29] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [30] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [31] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [32] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.0.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "nv" (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so (II) Module nv: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.8 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420, GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL, GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL, GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X, GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, 0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X, GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL, Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra, GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE, 0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE, GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329, Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series, GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700, GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 XT, 0x0049, Quadro FX 4000, 0x00C0, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, 0x0143, GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, 0x014B, 0x014C, 0x014D, Quadro FX 540, GeForce 6200, GeForce 6500, GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM), GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400, GeForce Go 6200, GeForce Go 6400, GeForce 6250, 0x016B, 0x016C, 0x016D, 0x016E, 0x0210, GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, 0x0220, GeForce 6200, 0x0222, 0x0228, 0x0090, GeForce 7800 GTX, GeForce 7800 GT, 0x0093, 0x0094, GeForce Go 7800, GeForce Go 7800 GTX, 0x009C, Quadro FX 4500, 0x009E (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset GeForce 6800 GT found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [6] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [7] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [8] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [9] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [10] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [11] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [12] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [13] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [14] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [15] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [16] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [20] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [22] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [23] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [24] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [25] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [27] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [29] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [30] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [31] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [32] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [6] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [7] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [8] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [9] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [10] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [11] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [12] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [13] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [14] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [15] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [16] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [22] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [25] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [26] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [27] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [28] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [29] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [30] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [32] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [33] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [34] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [35] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [36] 0 0 0xfa0003b0 - 0xfa0003bb (0xc) IS[B] [37] 0 0 0xfa0003c0 - 0xfa0003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) NV(0): Initializing int10 (WW) NV(0): Bad V_BIOS checksum (II) NV(0): Primary V_BIOS segment is: 0xc000 (--) NV(0): Chipset: "GeForce 6800 GT" (**) NV(0): Depth 24, (--) framebuffer bpp 32 (==) NV(0): RGB weight 888 (==) NV(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 7.0.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (==) NV(0): Using HW cursor (--) NV(0): Linear framebuffer at 0xE0000000 (--) NV(0): MMIO registers at 0xF8000000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/lib/xorg/modules/libi2c.so (II) Module i2c: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.8 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): Probing for analog device on output A... (--) NV(0): ...found one (II) NV(0): Probing for analog device on output B... (--) NV(0): ...can't find one (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (II) NV(0): Probing for EDID on I2C bus B... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (--) NV(0): DDC detected a CRT: (II) NV(0): Manufacturer: ADI Model: f50 Serial#: 655700 (II) NV(0): Year: 2002 Week: 43 (II) NV(0): EDID Version: 1.3 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) NV(0): Sync: Separate (II) NV(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.626 redY: 0.338 greenX: 0.278 greenY: 0.601 (II) NV(0): blueX: 0.150 blueY: 0.068 whiteX: 0.281 whiteY: 0.311 (II) NV(0): Supported VESA Video Modes: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) NV(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) NV(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) NV(0): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913 (II) NV(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) NV(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) NV(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 157.5 MHz Image Size: 350 x 262 mm (II) NV(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0 (II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0 (II) NV(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 97 kHz, PixClock max 180 MHz (II) NV(0): Serial No: 243T112A0154 (II) NV(0): Monitor name: ADI F950 (--) NV(0): CRTC 0 appears to have a CRT attached (II) NV(0): Using CRT on CRTC 0 (--) NV(0): VideoRAM: 262144 kBytes (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (WW) NV(0): config file vrefresh range 50-160Hz not within DDC vrefresh ranges. (II) NV(0): ADI MicroScan 955: Using hsync range of 31.50-96.00 kHz (II) NV(0): ADI MicroScan 955: Using vrefresh range of 50.00-160.00 Hz (II) NV(0): Clock range: 12.00 to 400.00 MHz (WW) (1600x1200,ADI MicroScan 955) mode clock 189MHz exceeds DDC maximum 180MHz (WW) (1600x1200,ADI MicroScan 955) mode clock 202.5MHz exceeds DDC maximum 180MHz (WW) (1600x1200,ADI MicroScan 955) mode clock 229.5MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "800x600" (hsync out of range) (WW) (1792x1344,ADI MicroScan 955) mode clock 204.8MHz exceeds DDC maximum 180MHz (WW) (1792x1344,ADI MicroScan 955) mode clock 261MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1792x1344" (hsync out of range) (II) NV(0): Not using default mode "896x672" (hsync out of range) (WW) (1856x1392,ADI MicroScan 955) mode clock 218.3MHz exceeds DDC maximum 180MHz (WW) (1856x1392,ADI MicroScan 955) mode clock 288MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1856x1392" (hsync out of range) (II) NV(0): Not using default mode "928x696" (hsync out of range) (WW) (1920x1440,ADI MicroScan 955) mode clock 234MHz exceeds DDC maximum 180MHz (WW) (1920x1440,ADI MicroScan 955) mode clock 297MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (II) NV(0): Not using default mode "960x720" (hsync out of range) (WW) (1920x1440,ADI MicroScan 955) mode clock 341.35MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (II) NV(0): Not using default mode "960x720" (hsync out of range) (WW) (2048x1536,ADI MicroScan 955) mode clock 266.95MHz exceeds DDC maximum 180MHz (WW) (2048x1536,ADI MicroScan 955) mode clock 340.48MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "2048x1536" (hsync out of range) (II) NV(0): Not using default mode "1024x768" (hsync out of range) (WW) (2048x1536,ADI MicroScan 955) mode clock 388.04MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "2048x1536" (hsync out of range) (WW) (1024x768,ADI MicroScan 955) mode clock 194.02MHz exceeds DDC maximum 180MHz (II) NV(0): Not using default mode "1024x768" (hsync out of range) (II) NV(0): Not using default mode "2048x1536" (width too large for virtual size) (II) NV(0): Not using default mode "1920x1440" (width too large for virtual size) (II) NV(0): Not using default mode "1856x1392" (width too large for virtual size) (II) NV(0): Not using default mode "1792x1344" (width too large for virtual size) (II) NV(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NV(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NV(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NV(0): Not using default mode "1600x1200" (width too large for virtual size) (II) NV(0): Not using default mode "1400x1050" (width too large for virtual size) (II) NV(0): Not using default mode "1400x1050" (width too large for virtual size) (--) NV(0): Virtual size is 1280x1024 (pitch 1280) (**) NV(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz (II) NV(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (**) NV(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) NV(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D) (II) NV(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (**) NV(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) NV(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz (II) NV(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (**) NV(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) NV(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (**) NV(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) NV(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D) (II) NV(0): Modeline "1024x768" 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) NV(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I) (II) NV(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (**) NV(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D) (II) NV(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (**) NV(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D) (II) NV(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (**) NV(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D) (II) NV(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) NV(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D) (II) NV(0): Modeline "800x600" 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) NV(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D) (II) NV(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) NV(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (II) NV(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) NV(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (II) NV(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) NV(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) NV(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (**) NV(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (**) NV(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D) (II) NV(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (**) NV(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) NV(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (**) NV(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (**) NV(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) NV(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) NV(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) NV(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (**) NV(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) NV(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) NV(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) NV(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) NV(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) NV(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (**) NV(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) NV(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) NV(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) (II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) NV(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) NV(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (**) NV(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (**) NV(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) NV(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D) (II) NV(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync (**) NV(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) NV(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) NV(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (**) NV(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) NV(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) NV(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (**) NV(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (**) NV(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) NV(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (**) NV(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (**) NV(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync (**) NV(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (**) NV(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) NV(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (**) NV(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) NV(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (**) NV(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) NV(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (--) NV(0): Display dimensions: (360, 270) mm (--) NV(0): DPI set to (90, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.8 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.0.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B] [1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] [2] 0 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xfd000000 - 0xfd003fff (0x4000) MX[B] [9] -1 0 0xfd004000 - 0xfd0047ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [11] -1 0 0xfc020000 - 0xfc03ffff (0x20000) MX[B] [12] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[B] [13] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[B] [14] -1 0 0x50100000 - 0x501003ff (0x400) MX[B] [15] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[B] [16] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [17] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B) [18] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [19] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B) [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [25] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [26] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [28] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [29] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [30] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B] [31] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B] [32] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B] [33] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B] [34] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [35] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [36] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [37] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [38] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] [39] 0 0 0xfa0003b0 - 0xfa0003bb (0xc) IS[B](OprU) [40] 0 0 0xfa0003c0 - 0xfa0003df (0x20) IS[B](OprU) (II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) NV(0): Backing store disabled (==) NV(0): Silken mouse enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "Auto" (**) Mouse1: Device: "/dev/input/mice" (**) Mouse1: Protocol: "Auto" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/input/mice" (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5 6 7" (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7 (**) Mouse1: Buttons: 11 (**) Option "CoreKeyboard" (**) Keyboard1: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard1: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard1: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard1: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard1: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (**) Option "Device" "/dev/input/mice" (II) Mouse1: GuessProtocol: setting mouse protocol to "PS/2" (II) Mouse1: ps2EnableDataReporting: succeeded Could not init font path element /usr/share/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/TTF, removing from list! Could not init font path element /usr/share/fonts/Type1, removing from list! Fatal server error: could not open default font 'fixed'
ok, after post my log, I emerged these fonts: encodings-1.0.0 font-adobe-100dpi-1.0.0 font-adobe-75dpi-1.0.0 font-adobe-utopia-100dpi-1.0.1 font-adobe-utopia-75dpi-1.0.1 font-adobe-utopia-type1-1.0.1 font-alias-1.0.1 font-arabic-misc-1.0.0 font-bh-100dpi-1.0.0 font-bh-75dpi-1.0.0 font-bh-lucidatypewriter-100dpi-1.0.0 font-bh-lucidatypewriter-75dpi-1.0.0 font-bh-ttf-1.0.0 font-bitstream-100dpi-1.0.0 font-bitstream-75dpi-1.0.0 font-bitstream-type1-1.0.0 font-cursor-misc-1.0.0 font-daewoo-misc-1.0.0 font-dec-misc-1.0.0 font-isas-misc-1.0.0 font-jis-misc-1.0.0 font-micro-misc-1.0.0 font-misc-cyrillic-1.0.0 font-misc-ethiopic-1.0.0 font-misc-meltho-1.0.0 font-misc-misc-1.0.0 font-mutt-misc-1.0.0 font-schumacher-misc-1.0.0 font-sony-misc-1.0.0 font-sun-misc-1.0.0 font-util-1.0.0 these are gone, (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/75dpi"). (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/100dpi"). but now, every fontdir is reported like this: Could not init font path element /usr/share/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/TTF, removing from list! Could not init font path element /usr/share/fonts/Type1, removing from list! still can not find the fixed font. I'm sure, I have font.scale, font.dir font.alias and encodings.dir in every font dir. here is emerge info Gentoo Base System version 1.6.13 Portage 2.0.53 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.6-r1, 2.6.14-gentoo-r5 i686) ================================================================= System uname: 2.6.14-gentoo-r5 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz dev-lang/python: 2.4.2 sys-apps/sandbox: 1.2.12 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 sys-devel/binutils: 2.16.1-r1 sys-devel/libtool: 1.5.20 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=pentium4 -fomit-frame-pointer -pipe -DNDEBUG -fno-ident" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/X11/xkb /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -march=pentium4 -fomit-frame-pointer -pipe -DNDEBUG -fno-ident -fno-enforce-eh-specs -fvisibility-inlines-hidden" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://mirror.datapipe.net/pub/gentoo http://mirror.averse.net/pub/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,-Bdirect" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://owl.gentoo.org/gentoo-portage" USE="x86 X a52 aac accessibility acl acpi alsa apache2 apm arts audiofile authdaemond avi bash-completion bcmath berkdb bitmap-fonts bluetooth bmp bonobo bzip2 bzlib cairo caps cjk crypt cscope ctype cups curl dbus directfb dmx dts dvd dvdr eds emacs-w3 emboss encode esd exif expat fam fbcon ffmpeg firefox flac foomaticdb fortran freetds freetype gd gdbm ggi gif gimpprint glitz glut gmp gnome gnutls gphoto2 gpm gstreamer gtk gtk2 gtkhtml guile hal iconv idn imagemagick imlib ipv6 ithreads jack java javascript jikes joystick jpeg jpeg2k junit kerberos lcms ldap libg++ libwww lirc lm_sensors mad maildir mailwrapper matroska memlimit mikmod mime mmap mmx mng motif mp3 mpeg mysql mysqli nas ncurses nis nls nocardbus nptl nptlonly nsplugin odbc offensive ogg oggvorbis openal openexr opengl pam pcmcia pcntl pcre pda pdflib perl php plotutils png pnp portaudio posix postgres ppds profile python qt quicktime readline ruby samba sasl sdl sftplogging skey slang slp sndfile snmp soap socks5 spell sqlite sse ssl svg svga symlink tcltk tcpd tetex theora threads tiff truetype truetype-fonts trusted type1-fonts udev unicode usb vcd vhosts vorbis win32codecs wmf xine xinerama xml xml2 xpm xprint xv xvid zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LINGUAS
(In reply to comment #28) > but now, every fontdir is reported like this: > > Could not init font path element /usr/share/fonts/misc, removing from list! > Could not init font path element /usr/share/fonts/TTF, removing from list! > Could not init font path element /usr/share/fonts/Type1, removing from list! > > > still can not find the fixed font. > I'm sure, I have font.scale, font.dir font.alias and encodings.dir in every > font dir. I encountered this problem suddenly a couple of days ago, and I'm still stumped as to what triggered it in the first place. After an emerge -e xorg-x11 (I suppose xorg-server would work too), X appears to be working okay now. But, nfi what caused the issue in the first place. > > here is emerge info > > Gentoo Base System version 1.6.13 > Portage 2.0.53 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.6-r1, > 2.6.14-gentoo-r5 i686) > ================================================================= > System uname: 2.6.14-gentoo-r5 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz > dev-lang/python: 2.4.2 > sys-apps/sandbox: 1.2.12 > sys-devel/autoconf: 2.13, 2.59-r6 > sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 > sys-devel/binutils: 2.16.1-r1 > sys-devel/libtool: 1.5.20 > virtual/os-headers: 2.6.11-r2 > ACCEPT_KEYWORDS="x86" > AUTOCLEAN="yes" > CBUILD="i686-pc-linux-gnu" > CFLAGS="-O2 -march=pentium4 -fomit-frame-pointer -pipe -DNDEBUG -fno-ident" > CHOST="i686-pc-linux-gnu" > CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config > /usr/share/X11/xkb /usr/share/config /var/qmail/control" > CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" > CXXFLAGS="-O2 -march=pentium4 -fomit-frame-pointer -pipe -DNDEBUG -fno-ident > -fno-enforce-eh-specs -fvisibility-inlines-hidden" > DISTDIR="/usr/portage/distfiles" > FEATURES="autoconfig distlocks sandbox sfperms strict" > GENTOO_MIRRORS="http://mirror.datapipe.net/pub/gentoo > http://mirror.averse.net/pub/gentoo" > LC_ALL="en_US.UTF-8" > LDFLAGS="-Wl,-O1 -Wl,-Bdirect" > MAKEOPTS="-j5" > PKGDIR="/usr/portage/packages" > PORTAGE_TMPDIR="/var/tmp" > PORTDIR="/usr/portage" > PORTDIR_OVERLAY="/usr/local/portage" > SYNC="rsync://owl.gentoo.org/gentoo-portage" > USE="x86 X a52 aac accessibility acl acpi alsa apache2 apm arts audiofile > authdaemond avi bash-completion bcmath berkdb bitmap-fonts bluetooth bmp bonobo > bzip2 bzlib cairo caps cjk crypt cscope ctype cups curl dbus directfb dmx dts > dvd dvdr eds emacs-w3 emboss encode esd exif expat fam fbcon ffmpeg firefox > flac foomaticdb fortran freetds freetype gd gdbm ggi gif gimpprint glitz glut > gmp gnome gnutls gphoto2 gpm gstreamer gtk gtk2 gtkhtml guile hal iconv idn > imagemagick imlib ipv6 ithreads jack java javascript jikes joystick jpeg jpeg2k > junit kerberos lcms ldap libg++ libwww lirc lm_sensors mad maildir mailwrapper > matroska memlimit mikmod mime mmap mmx mng motif mp3 mpeg mysql mysqli nas > ncurses nis nls nocardbus nptl nptlonly nsplugin odbc offensive ogg oggvorbis > openal openexr opengl pam pcmcia pcntl pcre pda pdflib perl php plotutils png > pnp portaudio posix postgres ppds profile python qt quicktime readline ruby > samba sasl sdl sftplogging skey slang slp sndfile snmp soap socks5 spell sqlite > sse ssl svg svga symlink tcltk tcpd tetex theora threads tiff truetype > truetype-fonts trusted type1-fonts udev unicode usb vcd vhosts vorbis > win32codecs wmf xine xinerama xml xml2 xpm xprint xv xvid zlib userland_GNU > kernel_linux elibc_glibc" > Unset: ASFLAGS, CTARGET, LANG, LINGUAS >
I just tried reproducing this from a dry stage1 to no avail. If someone could give me their exact install steps to reproduce this problem, we might be able to get this fixed up.
1, start from stage1 and set USE=-X to avoid xorg install, 2, install to stage3, all installed, then reboot from new system, 3, add X to USE flage, do emerge --newuse -uDp world, or emerge -e world 4, emerge additional fonts and drivers, in my case, I've installed all the media-fonts/* 5, xorg-x11-7 can not start, report can not find the fixed font. BTW, try using the info in my previous posts, maybe you need to unset tcltk in stage1.
Do you ever actually 'emerge xorg-x11' during that process?
no, before step 3, there is no any xorg apps in system.
Right, but the 'xorg-x11' meta-ebuild will never be pulled in as a dependency (or should never be). So do you emerge it after all the X libs are pulled in?
Yes, of course I do, I do emerged xorg-x11 for emergeing xorg-x11-7.0
I'm still unable to reproduce this. If someone is able to perform an installation where this problem occurs, I'd appreciate it if you send me a set of compile logs for the installation. See PORT_LOGDIR in 'man make.conf' for more details. It'll have to be set before you begin.
(In reply to comment #36) > I'm still unable to reproduce this. > > If someone is able to perform an installation where this problem occurs, I'd > appreciate it if you send me a set of compile logs for the installation. See > PORT_LOGDIR in 'man make.conf' for more details. It'll have to be set before > you begin. > would you please post your emerge info and emerge steps? I would like to try on your method to see the difference.
OK, I start to rebuild the system with all the same flags, it just works, the only difference between these 2 configs is -DNDEUBG, this time, when I do emerge xorg-x11, there is no -DNDEBUG in my CFLAGS, but my system is built with -DNDEBUG. Can not reproduce this now.
Huh, that's weird. Thanks for letting us know. That wasn't the issue of the original poster, so unfortunately it looks like many paths lead to this issue.
I ran into this bug after re-emerging my system with the -Bdirect flag. When I re-emerged xorg-x11 without the -Bdirect flag, the problem went away. Is there an easy way I can find out which packae doesn't like the flag without a step by step re-emerge?
Diego just posted yesterday on his blog that xorg-server was the culprit.
(In reply to comment #40) > I ran into this bug after re-emerging my system with the -Bdirect flag. > > When I re-emerged xorg-x11 without the -Bdirect flag, the problem went away. > > Is there an easy way I can find out which packae doesn't like the flag without > a step by step re-emerge? > Yes, the problem does seem somehow related to -Bdirect. More specifically, X will not start if the LD_BIND_DIRECT environment variable is set to anything. darktama@araqiel ~ $ Xnest -ac :1 # This is fine No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 X connection to :0.0 broken (explicit kill or server shutdown). darktama@araqiel ~ $ LD_BIND_DIRECT=1 Xnest -ac :1 # Doesn't work No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 Could not init font path element /usr/share/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/75dpi, removing from list! Could not init font path element /usr/share/fonts/100dpi, removing from list! Could not init font path element /usr/share/fonts/TTF, removing from list! Could not init font path element /usr/share/fonts/Type1, removing from list! Fatal server error: could not open default font 'fixed' darktama@araqiel ~ $ LD_BIND_DIRECT=0 Xnest -ac :1 # Why doesn't this work?! No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 No matching visual for __GLcontextMode with visual class = 1 (32774), nplanes = 4294967295 Could not init font path element /usr/share/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/75dpi, removing from list! Could not init font path element /usr/share/fonts/100dpi, removing from list! Could not init font path element /usr/share/fonts/TTF, removing from list! Could not init font path element /usr/share/fonts/Type1, removing from list! Fatal server error: could not open default font 'fixed' darktama@araqiel ~ $
Sorry Donnie, I accidently reverted you change to the summary.. Fixed (hopefully)
Uh, Michael have you ideas on that? :)
Ah - ok, so it's *possible* [ and I heard rumours of this sort of thing ] that the X server is using interposing deliberately, and that -Bdirect breaks that. Unfortunately, I havn't adapted my interoposing detection tool to work on executables yet - so hard to say. Either way - if this is the case; I would make sure you filter out -Bdirect for the X server package; HTH.
It *is* a font-alias issue. When running ./configure make make install, font-config installs fonts.alias for /usr/share/fonts/misc, but emerge font-alias, for some reason, does not do that. As a result, I've unpacked the font-alias archive and copied the file manually to /usr/share/fonts/misc/fonts.alias. That solved the problem. Although... I can't seem to see why emerge would skip that file.
OK, I have some info on this, as the title says, the problem is related to the Bdirect of binutils-2.16.1-r1, if you use a LDFLAGS="-Wl,-O1 -Wl,-Bdirect" in make.conf and set LD_BIND_DIRECT=1 in env vars, then emerge libfontenc and libXfont, then, xorg-x11-7.0 will not find the fixed font even this font exists. after remove these LDFLAGS and LD_BIND_DIRECT env vars, and reemerge these two packages, all works fine. Another thing, if you use these flags, and xorg-x11 still can work, then try do a env-update and source /etc/profile, then try again, it will stop working. And, I don't know which package is the problem, But I'm sure is one of the libfontenc and libXfont.
I think libXfont is the package that should filter this ldflag. Everything else works for me.
no, nothing should be filtering/caring about -Bdirect
finally I could fix that.. problem was that libXfont.so.1 pointed to libXfont.so.1.5 therefore I got an error message trying to use bdftopcf.. which is used installing the needed fonts At first I changed the link for libXfont.so.1 to libXfont.so.1.4.1 like it was originally for a fried of mine who did experienced that kind of problems which worked, but was allways rechanged within the process of emergin.. The final solution was just to copy libXfont.so.1.4.1 over libXfont.so.1.5, as this fried I have nerver had libXfont.so.1.5 I guess I won't be missing it.. cp /usr/lib/libXfont.so.1.4.1 /usr/lib/libXfont.so.1.5 made it for me..
For me, this has nothing to do with -Bdirect (never enabled that), but my fonts.dir files are empty, i.e. two bytes long consisting of just a zero and a newline. Running mkfontdir does not change this, and neither does remerging font-misc-misc. Any idea why? As for others here, startx fails, outputting this: Could not init font path element /usr/share/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/75dpi, removing from list! Could not init font path element /usr/share/fonts/100dpi, removing from list! Could not init font path element /usr/share/fonts/local, removing from list! Fatal server error: could not open default font 'fixed' So I tried manually creating a fonts.dir with these two lines: 1 6x13-ISO8859-1.pcf.gz -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1 and running startx, and this time the first line (for the misc dir) didn't appear ... but startx still failed with the same fatal server error.
To clarify, I ran into this after emerging xorg-x11-7.0-r1 yesterday. Just noticed that this bug is quite a bit older than that. My emerge --info: Gentoo Base System version 1.6.15 Portage 2.1-r1 (default-linux/amd64/2005.0, gcc-3.4.6, glibc-2.3.6-r4, 2.6.16-gentoo-r9 x86_64) ================================================================= System uname: 2.6.16-gentoo-r9 x86_64 AMD Athlon(tm) 64 FX-55 Processor distcc 2.18.3 x86_64-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] dev-lang/python: 2.3.5-r2, 2.4.2 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.12 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r2 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.16 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=k8 -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/lib64/mozilla/defaults/pref /usr/share/X11/xkb /usr/share/config" CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c" CXXFLAGS="-march=k8 -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict" GENTOO_MIRRORS="http://ftp.rhnet.is/pub/gentoo http://gentoo.osuosl.org http://www.ibiblio.org/pub/Linux/distributions/gentoo" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.is.gentoo.org/gentoo-portage" USE="amd64 X aac aalib akode alsa apache2 audiofile avi bash-completion berkdb bitmap-fonts cdparanoia cdr cli crypt cups divx4linux dlloader doc dri dvd dvdr dvdread eds emboss encode fastcgi ffmpeg flac foomaticdb fortran gif ginac gnome gphoto2 gpm gstreamer gtk gtk2 hal ieee1394 imagemagick imlib ipv6 isdnlog java jpeg jpeg2k kde lcms libcaca lirc live lm_sensors lzw lzw-tiff mad mng mono mozdevelop mozsvg mp3 mpeg musicbrainz mysql mythtv ncurses nls nptl ofx ogg oggvorbis openal openexr opengl pam pcre pdf pdflib perl png povray pppd python qhull qt qt3 qt4 quicktime readline reflection ruby samba sdl session speex spell spl ssl svg tcpd tetex theora tiff truetype truetype-fonts type1-fonts unicode usb v4l v4l2 vorbis wifi x264 xanim xine xmms xorg xpm xscreensaver xv xvid xvmc zlib elibc_glibc input_devices_keyboard input_devices_mouse kernel_linux userland_GNU video_cards_nvidia video_cards_nv video_cards_vesa" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS
