| Summary: | ifconfig/dhcpcd ath0 -> kernel BUG at net/core/skbuff.c:91! | ||
|---|---|---|---|
| Product: | Gentoo Linux | Reporter: | Paul Keser <gentoo> |
| Component: | [OLD] Core system | Assignee: | Gentoo Kernel Bug Wranglers and Kernel Maintainers <kernel> |
| Status: | RESOLVED TEST-REQUEST | ||
| Severity: | critical | ||
| Priority: | High | ||
| Version: | unspecified | ||
| Hardware: | x86 | ||
| OS: | Linux | ||
| Whiteboard: | |||
| Package list: | Runtime testing required: | --- | |
latexer (this is 2.6.8.x) I can't really test this. Any ideas what I can do to get past this? It took me months to get this system sorted out and now I am back to either booting from knoppix or XP. Please help!!! I don't care what I have to disable, downgrade etc. I really need to get this system back online. Thanks -PaulK Linux version 2.6.8-gentoo-r3 (root@candito) (gcc version 3.3.4 20040623 (Gentoo that's an outdated kernel, you should update it I got a similar error. All I did was remove ip filtering from the kernel because I don't need it on my laptop.
Kernel linux-2.6.11-gentoo-r4
I put it back and the problem went away. Silly me trying to make my kernel smaller.
I can't change the status, you should consider changing this back to open.
Here's the output of DMESG
ath_rate_onoe: 1.0
ath_pci: 0.9.4.12 (EXPERIMENTAL)
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: 802.11 address: 00:0d:88:c9:a6:b0
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0x21000000, irq=11
skput:over: e096382a:31 put:31 dev:<NULL>------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:91!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in: wlan_wep ath_pci ath_rate_onoe ath_hal ohci1394 3c59x snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp v4l2_common wlan
CPU: 0
EIP: 0060:[<c0324f8b>] Tainted: P VLI
EFLAGS: 00010296 (2.6.11-gentoo-r4)
EIP is at skb_over_panic+0x3b/0x50
eax: 0000002c ebx: de5bb280 ecx: c04ad1d0 edx: 00000001
esi: 00000028 edi: 0000001f ebp: debc23f4 esp: de489cd8
ds: 007b es: 007b ss: 0068
Process dhcpcd (pid: 8123, threadinfo=de488000 task=dfb47020)
Stack: c03da4e0 e096382a 0000001f 0000001f c03b72ac e0963836 de5bb280 0000001f
e096382a 00000000 00000000 debc23f4 e095eb3c de489d28 0000001f e09ff01f
debc23f4 debc2602 de5dc000 debc2000 e0a036d6 00000000 00000001 debc23f4
Call Trace:
[<e096382a>] ieee80211_getmgtframe+0xba/0xe0 [wlan]
[<e0963836>] ieee80211_getmgtframe+0xc6/0xe0 [wlan]
[<e096382a>] ieee80211_getmgtframe+0xba/0xe0 [wlan]
[<e095eb3c>] ieee80211_send_mgmt+0x97c/0x9f0 [wlan]
[<e09ff01f>] ath_chan2flags+0x1f/0x80 [ath_pci]
[<e0a036d6>] ath_chan_set+0x36/0x1f0 [ath_pci]
[<e095fe29>] ieee80211_newstate+0x2f9/0x6b0 [wlan]
[<e0a03b5d>] ath_newstate+0x1ad/0x3b0 [ath_pci]
[<e095b4b4>] ieee80211_next_scan+0x124/0x180 [wlan]
[<e095b37e>] ieee80211_begin_scan+0x7e/0x90 [wlan]
[<e095fdc9>] ieee80211_newstate+0x299/0x6b0 [wlan]
[<e0a03b5d>] ath_newstate+0x1ad/0x3b0 [ath_pci]
[<e09ff215>] ath_init+0x195/0x2d0 [ath_pci]
[<c032aa15>] dev_open+0x85/0xa0
[<c032eb91>] dev_mc_upload+0x31/0x60
[<c032c063>] dev_change_flags+0x53/0x130
[<c032a8e6>] dev_load+0x36/0x80
[<c03663e7>] devinet_ioctl+0x257/0x5d0
[<c0368986>] inet_ioctl+0x66/0xb0
[<c03771d4>] packet_ioctl+0x154/0x190
[<c0321799>] sock_ioctl+0xd9/0x260
[<c01693ae>] do_ioctl+0x8e/0xa0
[<c01695e5>] vfs_ioctl+0x65/0x1f0
[<c01697b5>] sys_ioctl+0x45/0x70
[<c0103159>] sysenter_past_esp+0x52/0x75
Code: c0 0f 44 c2 89 44 24 10 8b 44 24 1c 89 44 24 0c 8b 41 60 c7 04 24 e0 a4 3d c0 89 44 24 08 8b 44 24 20 89 44 24 04 e8 b5 47 df ff <0f> 0b 5b 00 69 7f 3d c0 83 c4 14 c3 89 f6 8d bc 27 00 00 00 00
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc0001bbaa841]
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Please file this upstream at http://bugzilla.kernel.org |
It was working fine until I did an "emerge -v --update --deep world" this weekend. I also did a "genkernel --menuconfig all" and enabled almost everything in the iptables section preparing to configure firewall on host. Now system boots fine, ath0 looks good until I try to give it an IP either with ifconfig or dhcpcd. I get a segmentation fault and then ifconfig -a locks up. I am running 2.6.8-gentoo-r3 on an IBM thinkpad T41 with internal atheros a/b/g wireless card. Please let me know if there is any additional info you need. I am a gentoo noob but have been using various flavors of linux for 5-6 years. dmesg output from seg fault: skput:over: e1a1238a:21 put:21 dev:<NULL>------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:91! invalid operand: 0000 [#1] Modules linked in: snd_pcm_oss snd_mixer_oss ohci_hcd snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd uhci_hcd intel_agp agpgart ath_pci wlan ath_hal e1000 sbp2 ohci1394 ieee1394 usb_storage ehci_hcd usbcore CPU: 0 EIP: 0060:[<c035c759>] Tainted: P EFLAGS: 00210206 (2.6.8-gentoo-r3) EIP is at skb_over_panic+0x29/0x40 eax: 0000002c ebx: d8533900 ecx: dece10e0 edx: c0414338 esi: 00000150 edi: 00000015 ebp: dee5a3ac esp: d5f79d84 ds: 007b es: 007b ss: 0068 Process ifconfig (pid: 12374, threadinfo=d5f78000 task=df8bd8b0) Stack: c03fd154 e1a1238a 00000015 00000015 c03e22cb e1a12392 d8533900 00000015 e1a1238a 00000000 00000000 df2dd000 e1a0da3c d5f79dcc 00000015 00000000 e19c3c25 c1788000 dee5a000 dee5a06c 00000001 dee5a3ac dee5a3ac e1a0eba0 Call Trace: [<e1a1238a>] ieee80211_getmgtframe+0xaa/0xd0 [wlan] [<e1a12392>] ieee80211_getmgtframe+0xb2/0xd0 [wlan] [<e1a1238a>] ieee80211_getmgtframe+0xaa/0xd0 [wlan] [<e1a0da3c>] ieee80211_send_mgmt+0x93c/0x9d0 [wlan] [<e19c3c25>] ath_startrecv+0x95/0xc0 [ath_pci] [<e1a0eba0>] ieee80211_newstate+0x240/0x550 [wlan] [<e19c40f7>] ath_newstate+0x177/0x390 [ath_pci] [<e1a0aaff>] ieee80211_next_scan+0xff/0x150 [wlan] [<e1a0eb58>] ieee80211_newstate+0x1f8/0x550 [wlan] [<e19c40f7>] ath_newstate+0x177/0x390 [ath_pci] [<e19c0087>] ath_init+0x177/0x2a0 [ath_pci] [<c0361293>] dev_open+0xd3/0x110 [<c03625d1>] dev_change_flags+0x51/0x130 [<c0396b29>] devinet_ioctl+0x239/0x580 [<c0398a45>] inet_ioctl+0x45/0x90 [<c0359a5d>] sock_ioctl+0xbd/0x250 [<c015a2ed>] sys_ioctl+0x8d/0x1f0 [<c01174a0>] do_page_fault+0x0/0x562 [<c0105cf7>] syscall_call+0x7/0xb Code: 0f 0b 5b 00 72 ac 3f c0 83 c4 14 c3 8d 74 26 00 8d bc 27 00 ifconfig -a BEFORE seg fault: bash-2.05b# ifconfig -a ath0 Link encap:Ethernet HWaddr 00:05:4E:47:9F:C6 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:199 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:11 Memory:e1972000-e1982000 eth0 Link encap:Ethernet HWaddr 00:0D:60:8B:83:3C BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x8000 Memory:c0220000-c0240000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:200 (200.0 b) TX bytes:200 (200.0 b) Reproducible: Always Steps to Reproduce: 1.a. ifconfig ath0 192.168.1.50 or 1.b. dhcpcd ath0 2.ifconfig -a 3. Actual Results: ifconfig -a locks up, no network connecivity before or after Expected Results: ip address configured, network connectivity established. full dmesg up to but BEFORE seg fault: bash-2.05b# dmesg Linux version 2.6.8-gentoo-r3 (root@candito) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Sun Oct 10 15:13:04 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data) BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6e00 ACPI: XSDT (v001 IBM TP-1R 0x00003041 LTP 0x00000000) @ 0x1ff6af83 ACPI: FADT (v003 IBM TP-1R 0x00003041 IBM 0x00000001) @ 0x1ff6b000 ACPI: SSDT (v001 IBM TP-1R 0x00003041 MSFT 0x0100000e) @ 0x1ff6b1b4 ACPI: ECDT (v001 IBM TP-1R 0x00003041 IBM 0x00000001) @ 0x1ff76e06 ACPI: TCPA (v001 IBM TP-1R 0x00003041 PTL 0x00000001) @ 0x1ff76e58 ACPI: BOOT (v001 IBM TP-1R 0x00003041 LTP 0x00000001) @ 0x1ff76fd8 ACPI: DSDT (v001 IBM TP-1R 0x00003041 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Kernel command line: root=/dev/ram0 real_root=/dev/hda5 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1694.933 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Mon Jun 7 10:52:38 EDT 2004 : initialized Speakup: loading module "speakup_n" request_module: runaway loop modprobe speakup_n Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 512688k/523648k available (2774k kernel code, 10176k reserved, 966k data, 168k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3350.52 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Couldn't initialize miscdevice /dev/synth. CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1700MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1694.0230 MHz. ..... host bus clock speed is 99.0660 MHz. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1070k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Found ECDT ACPI-0179: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. ACPI-0182: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 vesafb: ATI Technologies Inc., M9 , 01.00 (OEM: ATI MOBILITY RADEON 9000) vesafb: VBE version: 2.0 vesafb: protected mode interface info at c000:580d vesafb: pmi: set display start = c00c587b, set palette = c00c58b5 vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz vesafb: scrolling: redraw vesafb: framebuffer at 0xe0000000, mapped to 0xe0815000, size 16384k fb0: VESA VGA frame buffer device Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 vesafb: mode switch failed (eax: 0x41004f) Console: switching to colour frame buffer device 80x30 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 acpi_floppy_resource: 6 ioports at 0x3f0 acpi_floppy_resource: 1 ioports at 0x3f7 floppy: controller ACPI FDC at I/O 0x3f0-0x3f5, 0x3f7-0x3f7 irq 6 dma channel 2 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HTS726060M9AT00, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA755zDVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 110194034 sectors (56419 MB) native capacity is 117210240 sectors (60011 MB) hda: 110194034 sectors (56419 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 st: Version 20040403, fixed bufsize 32768, s/g segs 256 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] Yenta: ISA IRQ mask 0x04f8, PCI irq 11 Socket status: 30000086 ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] Yenta: ISA IRQ mask 0x04f8, PCI irq 11 Socket status: 30000086 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: found "Intel(R) Pentium(R) M processor 1700MHz": max frequency: 1700000kHz p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ACPI: (supports S0 S3 S4 S5) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 168k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem e1887000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> ReiserFS: hda5: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda5 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 997912k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda5, internal journal e1000: Ignoring new-style parameters in presence of obsolete ones Intel(R) PRO/1000 Network Driver - version 5.2.52-k4 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.11.6 wlan: 0.8.4.2 (EXPERIMENTAL) ath_pci: 0.9.4.0 (EXPERIMENTAL) ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: 802.11 address: 00:05:4e:47:9f:c6 ath0: Use hw queue 0 for WME_AC_BE traffic ath0: Use hw queue 1 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Atheros 5212: mem=0xc0210000, irq=11 kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda6, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS on hda5, internal journal Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xd0000000 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49445 usecs intel8x0: clocking to 48000 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.