Bug 61037

Summary:	Slave node not booting correctly
Product:	Gentoo Linux	Reporter:	golam <gchowdhu>
Component:	[OLD] Unspecified	Assignee:	Gentoo Cluster Team <cluster>
Status:	RESOLVED WONTFIX
Severity:	normal
Priority:	High
Version:	unspecified
Hardware:	All
OS:	Linux
Whiteboard:
Package list:		Runtime testing required:	---

Description golam 2004-08-20 07:38:52 UTC

Hi,
> I have setup the Diskless Nodes with Gentoo and when I boot up the slave
> the node I am having problem. I am using kernel 2.6.5. When the slave
> boots it hangs after ACPI:(support SO S1 S4 S5) and then starts sending
> DHCP request..
>
> System spec for both slave and master:
> # Tyan Tiger MP(S2460) Dual AMD Motherboard
> # AMD Athlon MP1600+ @ 266FSB
> # 2 x 512MB 266MHz DDR PC2100 Reg ECC DIMM
> # 3COM 905BTX PCI 10/100
> # Maxtor 20GB 7200rpm ATA133HDD Drive
>


Reproducible: Always
Steps to Reproduce:
1.
2.
3.

Comment 1 Antonio 2004-08-24 01:03:28 UTC

I have similar problem with ACPI on this  MB Tyan Tiger MP(S2460)
I use kernel 2.6.5, 2.6.7, 2.6.8 and my machine work well on boot but when shutdown -h now or shutdown -r now the system does not off or reboot but sleep.
If i try to reset the system does not reboot.
I power off and power on to work correcly.

Sorry for my bad english

Comment 2 Josh England 2005-06-21 00:08:28 UTC

These are not cluster problems.  The bug is almost a year old.  If the original
poster can send (much) more information regarding his problem, there may be a
resolution.  Otherwise, the bug should be closed with WONTFIX.

-JE

Comment 3 Josh England 2005-06-21 19:56:56 UTC

Nothing to do with this...closing the bug.