Summary: | media-tv/ivtv-0.10.1-r1 unneeded kernel checks? | ||
---|---|---|---|
Product: | Gentoo Linux | Reporter: | Jesse Adelman <jesse> |
Component: | New packages | Assignee: | Doug Goldstein (RETIRED) <cardoe> |
Status: | RESOLVED INVALID | ||
Severity: | normal | CC: | beandog, funtoos |
Priority: | High | ||
Version: | unspecified | ||
Hardware: | x86 | ||
OS: | Linux | ||
URL: | http://www.ivtvdriver.org/index.php/Howto#Kernel_configuration_specifics | ||
Whiteboard: | |||
Package list: | Runtime testing required: | --- | |
Attachments: | My gentoo-sources-2.6.19-r5 kernel config |
Description
Jesse Adelman
2007-03-12 06:43:47 UTC
Created attachment 113042 [details]
My gentoo-sources-2.6.19-r5 kernel config
The /proc/config.gz from my mythbox with one PVR-350.
USE="-fbcon" if you dislike the check... ;) Hrm... I added -fbcon to packages.use, and while the driver installs, now the ivtv PVR-350 X driver is now unhappy, because /dev/fb1 is missing. ivtv-osd also is unhappy (and that creates the /dev/fb1 entry on my setup, IIRC). From Xorg.0.log snippet: (II) IVTVDEV_TST: driver for framebuffer: PVR-350 (II) Primary Device is: PCI 02:00:0 (--) Chipset PVR-350 found (EE) open /dev/fb1: No such file or directory (EE) Screen 0 deleted because of no matching config section. (II) UnloadModule: "ivtvdev" (EE) Device(s) detected, but none match those in the config file. Fatal server error: no screens found and, from dmesg (relevant snippet): [ 43.126060] ivtv: ==================== START INIT IVTV ==================== [ 43.126068] ivtv: version 0.10.1 (tagged release) loading [ 43.126072] ivtv: Linux version: 2.6.19-gentoo-r5 preempt mod_unload K7 [ 43.126076] ivtv: In case of problems please include the debug info between [ 43.126080] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 43.126084] ivtv: any module options, when mailing the ivtv-users mailinglis t. [ 43.126237] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 43.126744] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 43.149928] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (lev el, high) -> IRQ 19 [ 43.149948] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 43.165114] usb 2-1: configuration #1 chosen from 1 choice [ 43.399159] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 43.399326] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.401160] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 43.424119] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 43.452770] parport: PnPBIOS parport detected. [ 43.452847] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 43.650454] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 43.717102] usb 2-2: configuration #1 chosen from 1 choice [ 43.944426] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301b301bb36315] [ 43.976165] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 44.150022] usb 1-1: configuration #1 chosen from 1 choice [ 44.412183] usb 1-2: new full speed USB device using ohci_hcd and address 4 [ 44.577720] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) [ 44.599003] usb 1-2: configuration #1 chosen from 1 choice [ 44.602850] usbcore: registered new interface driver hiddev [ 44.616343] input: Logitech WingMan Cordless Gamepad as /class/input/input1 [ 44.616561] input: USB HID v1.10 Joystick [Logitech WingMan Cordless Gamepad] on usb-0000:00:02.1-1 [ 44.624687] input: Itron Presenter as /class/input/input2 [ 44.625143] input: USB HID v1.00 Mouse [Itron Presenter] on usb-0000:00:02.1- 2 [ 44.632331] input: Itron Presenter as /class/input/input3 [ 44.632571] input: USB HID v1.00 Keyboard [Itron Presenter] on usb-0000:00:02 .1-2 [ 44.868170] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 45.000912] hiddev96: USB HID v1.00 Device [American Power Conversion Back-UP S 500 FW: 6.4.D USB FW: c1 ] on usb-0000:00:02.0-1 [ 45.000946] usbcore: registered new interface driver usbhid [ 45.000953] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 45.085434] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 45.238782] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604 [ 45.238805] usbcore: registered new interface driver usblp [ 45.238811] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 45.308179] ivtv0: Encoder revision: 0x02060039 [ 45.316201] ivtv0: Decoder revision: 0x02020023 [ 45.377620] tveeprom 0-0050: Hauppauge model 48132, rev K168, serial# 7336071 [ 45.377629] tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 4 7) [ 45.377635] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 45.377640] tveeprom 0-0050: audio processor is MSP4448 (idx 27) [ 45.377645] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 45.377649] tveeprom 0-0050: has radio, has IR remote [ 45.377654] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 45.393340] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 45.393403] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 45.397745] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 45.456052] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 45.683589] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) [ 45.706795] msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) [ 45.706803] msp3400 0-0040: MSP4448G-A2 supports radio, mode is autodetect an d autoselect [ 45.729798] ivtv0: Registered device video0 for encoder MPEG (16 MB) [ 45.730763] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 45.731062] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 45.731184] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 45.731457] ivtv0: Registered device radio0 for encoder radio [ 45.731484] ivtv0: Registered device video16 for decoder MPEG (4 MB) [ 45.731698] ivtv0: Registered device vbi8 for decoder VBI (1 MB) [ 45.732201] ivtv0: Registered device vbi16 for decoder VOUT [ 45.732232] ivtv0: Registered device video48 for decoder YUV (4 MB) [ 45.827914] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 45.932261] tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) [ 46.341225] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 46.341260] ivtv: ==================== END INIT IVTV ==================== [ 46.344936] ACPI: PCI Interrupt Link [APCE] enabled at IRQ 16 [ 46.367787] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APCE] -> GSI 16 (lev el, high) -> IRQ 20 [ 46.367803] PCI: Unable to reserve mem region #2:4000000@d8000000 for device 0000:02:00.0 [ 46.391928] nvidiafb: cannot request PCI regions [ 46.473664] nvidia: module license 'NVIDIA' taints kernel. [ 46.513337] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 1 6 21:56:04 PDT 2006 [ 48.151588] i2c /dev entries driver [ 48.264620] ivtv-osd: Specified card (id 0) is either not present or does no t support TV out [ 48.413832] ACPI: Thermal Zone [THRM] (40 C) [ 48.447347] ACPI: Fan [FAN] (on) [ 48.489229] lirc_dev: IR Remote Control driver registered, at major 61 [ 48.561806] bttv: driver version 0.9.16 loaded [ 48.561815] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 48.603290] lirc_i2c: chip found @ 0x18 (Hauppauge IR) [ 48.631802] lirc_dev: lirc_register_plugin: sample_rate: 10 What is strange is that media-tv/ivtv-0.9.1 was fine with my setup - and I had recently updated to that without trouble. I'm dropping back to 0.9.1 for now. Ah, and just FYI: I accidentally left -fbcon on when downgrading to 0.9.1, and everything works (PVR-350 input and X driver output). Weird. (In reply to comment #0) > > I'm not sure if the CONFIG_FONTS is needed, but I don't have a Trident > Framebuffer, so not sure why that is required now? Neither of these are > mentioned in the ivtv FAQ. Documented in the README and the ebuild notice when using +fbcon. Closing as INVALID *** Bug 172310 has been marked as a duplicate of this bug. *** |