Summary: | ne2k-pci no link in gentoo-sources-2.16.18-r3 | ||
---|---|---|---|
Product: | Gentoo Linux | Reporter: | Jens-Uwe Mager <jum> |
Component: | [OLD] Core system | Assignee: | Gentoo Kernel Bug Wranglers and Kernel Maintainers <kernel> |
Status: | RESOLVED INVALID | ||
Severity: | normal | CC: | toto |
Priority: | High | ||
Version: | unspecified | ||
Hardware: | All | ||
OS: | Other | ||
Whiteboard: | |||
Package list: | Runtime testing required: | --- |
Description
Jens-Uwe Mager
2006-11-25 10:16:10 UTC
yeap -r3 is ungood =] I have: darkstar toto # modprobe tuner type=28 FATAL: Error inserting tuner (/lib/modules/2.6.18-gentoo-r3/kernel/drivers/media/video/tuner.ko): Unknown symbol in module, or unknown parameter (see dmesg) modprobe lirc-gpio FATAL: Error inserting lirc_gpio (/lib/modules/2.6.18-gentoo-r3/misc/lirc_gpio.ko): Invalid request code go back to -r2 hm, sorry me. r2 don't wanna work too =[ Think it's problem not in kernel, think on udev-103, for example http://bugs.gentoo.org/show_bug.cgi?id=152908 Jens what udev U use ? I am using sys-fs/udev-103. But I do not believe that udev has anything to do with this, as I am not using any special device rules for ethernet devices. And -r2 works fine for me. heh, ok. btw I don't use any change udev rules, only default. I try use 103 and 100-r2 and this modules don't wanna work. On 087-r1 all ok. On kernel -r2 and -r3 work good with 087-r1 too. Sorry for flood. toto: your problem is different Jens: please attach dmesg from working and non-working kernels, and the same for "ifconfig -a" OK, while doing the dmesg output in both states I found the culprit - it is a user error therefore I close the bug as invalid. For some strange reason the order of ethernet interfaces changed recently and eth0 and eth1 were switched. As the old eth1 (now eth0) was unused and therefore not connected there is no carrier. Switching around configs makes it work again. Sorry for the noise. |