Bug 121380 – 2.6.15-gentoo-r2 will not boot with error PER_CPU: Invalid layout

• Product: Gentoo Linux
• Status: RESOLVED NEEDINFO

[Description Talat Malik 2006-02-02 17:45:39 UTC]

I built 2.6.15.r2 on Netra 200 from livecd 2005.1. Buid was all sucessful. when i boot it comes back with error as follows:
ok boot disk1:1
Boot device: /pci@1f,0/pci@1/scsi@8/disk@1,0:1  File and args:
SILO Version 1.4.10
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.15

Remapping the kernel... done.
Registering callbacks... done.
Booting Linux...
PER_CPU: Invalid layout, ptr[fffff80020160000] shift[10] base[fffff8001f972000]
Program terminated
ok
============ ls -l /boot =============
-rwxr-xr-x  1 root root 4147448 Feb  2 22:01 2.6.15-gentoo-r2
lrwxrwxrwx  1 root root       1 Feb  2 00:26 boot -> .
-rw-r--r--  1 root root    1024 Feb  2 23:25 fd.b
-rw-r--r--  1 root root     512 Feb  2 23:25 first.b
-rw-r--r--  1 root root    1024 Feb  2 23:25 generic.b
-rw-r--r--  1 root root     816 Feb  2 23:25 ieee32.b
-rw-r--r--  1 root root    7192 Feb  2 23:25 isofs.b
-rw-r--r--  1 root root    7680 Feb  2 23:30 old.b
-rw-r--r--  1 root root   65536 Feb  2 23:30 second.b
-rw-r--r--  1 root root   63281 Feb  2 23:25 silotftp.b
-rw-r--r--  1 root root     512 Feb  2 23:25 ultra.b
================= /etc/fstab ============
/dev/sdb1        /       ext3            defaults,noatime        0 1
/dev/sda1        none    swap            sw                      0 0

/dev/sdb5        /usr    ext3            defaults,noatime        0 2
/dev/sdb4        /var    ext3            defaults,noatime        0 2

/dev/sda2        /home   ext3            defaults,noatime        0 2
/dev/cdroms/cdrom0 /mnt/cdrom  iso9660   noauto,ro               0 0

shm              /dev/shm  tmpfs         nodev,nosuid,noexec     0 0
none             /proc     proc            defaults                0 0
none             /proc/openprom  openpromfs      defaults                0 0

================= /etc/silo.conf ============
partition = 1         # Boot partition (= root partition)
root = /dev/sdb1      # Root partition
timeout = 600         # Wait 15 seconds before booting the default section

image = /boot/2.6.15-gentoo-r2
  label = gentoo-2.6

[Comment 1 Carlos Silva (RETIRED) 2006-02-08 15:29:00 UTC]

Sorry, i didn't find any info about Netra 200. Is it a smp system?

[Comment 2 Talat Malik 2006-02-08 16:05:41 UTC]

(In reply to comment #1)
> Sorry, i didn't find any info about Netra 200. Is it a smp system?

I don't if netra 200 is available in smp configurations. However, mine is single CPU.

[Comment 3 Daniel Drake (RETIRED) 2006-02-10 09:07:31 UTC]

sparc people: Any ideas here?

A netra 200 will not boot, it produces this kernel error in early bootup:

PER_CPU: Invalid layout, ptr[fffff80020160000] shift[10] base[fffff8001f972000]

[Comment 4 Gustavo Zacarias (RETIRED) 2006-02-10 09:18:31 UTC]

Nope, the netra 200s are UP with a UltraSPARC-IIe.
Which OBP version do you have, and did you try upgrading to the latest?

[Comment 5 Carlos Silva (RETIRED) 2006-02-12 17:08:54 UTC]

huummm.... can you provide your .config file? that error is related to SMP. since the Netra 200 is UP, why do you have SMP activated? Looks like it can cause trouble...

[Comment 6 Gustavo Zacarias (RETIRED) 2006-02-14 07:39:59 UTC]

Actually the livecd kernels are only SMP and there's no reason on sparc64 at least for SMP kernels not to work on UP systems.
I tend to think it's an old buggy OBP, so please specify version or try the latest.

[Comment 7 Daniel Drake (RETIRED) 2006-02-28 07:52:38 UTC]

Please reopen when you have provided info about the OBP.