Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 99704 Details for
Bug 151414
sys-fs/udev goes into continuous loop with two error messages "get_netlink_msg: unable to receive..."
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
dmesg output
dmesg (text/plain), 28.81 KB, created by
Ian Frazer
on 2006-10-14 23:53:14 UTC
(
hide
)
Description:
dmesg output
Filename:
MIME Type:
Creator:
Ian Frazer
Created:
2006-10-14 23:53:14 UTC
Size:
28.81 KB
patch
obsolete
>: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Enabling APIC mode: Flat. Using 1 I/O APICs >Using ACPI (MADT) for SMP configuration information >Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) >Built 1 zonelists >Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 splash=silent,theme:livecd-2006.1 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo doscsi nousb nokeymap docache >mapped APIC to ffffd000 (fee00000) >mapped IOAPIC to ffffc000 (fec00000) >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 16384 bytes) >Detected 499.999 MHz processor. >Using tsc for high-res timesource >Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized >Console: colour dummy device 80x25 >Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >Memory: 1031040k/1048568k available (2307k kernel code, 16816k reserved, 578k data, 224k init, 131064k highmem) >Checking if this processor honours the WP bit even in supervisor mode... Ok. >Calibrating delay using timer specific routine.. 1001.46 BogoMIPS (lpj=5007326) >Mount-cache hash table entries: 512 >CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: L1 I cache: 16K, L1 D cache: 16K >CPU: L2 cache: 512K >CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 >Checking 'hlt' instruction... OK. >Freeing SMP alternatives: 16k freed >CPU0: Intel Pentium III (Katmai) stepping 02 >Booting processor 1/0 eip 2000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 1000.01 BogoMIPS (lpj=5000067) >CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: L1 I cache: 16K, L1 D cache: 16K >CPU: L2 cache: 512K >CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 >CPU1: Intel Pentium III (Katmai) stepping 02 >Booting processor 2/1 eip 2000 >Initializing CPU#2 >Calibrating delay using timer specific routine.. 1000.03 BogoMIPS (lpj=5000151) >CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: L1 I cache: 16K, L1 D cache: 16K >CPU: L2 cache: 512K >CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 >CPU2: Intel Pentium III (Katmai) stepping 02 >Booting processor 3/2 eip 2000 >Initializing CPU#3 >Calibrating delay using timer specific routine.. 1000.06 BogoMIPS (lpj=5000335) >CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 >CPU: L1 I cache: 16K, L1 D cache: 16K >CPU: L2 cache: 512K >CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 >CPU3: Intel Pentium III (Katmai) stepping 02 >Total of 4 processors activated (4001.57 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >checking TSC synchronization across 4 CPUs: passed. >Brought up 4 CPUs >migration_cost=1905 >checking if image is initramfs... it is >Freeing initrd memory: 4268k freed >NET: Registered protocol family 16 >EISA bus registered >ACPI: bus type pci registered >PCI: PCI BIOS revision 2.10 entry at 0xfcc5e, last bus=2 >Setting up standard PCI resources >ACPI: Subsystem revision 20060127 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PX0A] (0000:00) >PCI: Probing PCI hardware (bus 00) >PCI quirk: region 0800-083f claimed by PIIX4 ACPI >PCI quirk: region 0850-085f claimed by PIIX4 SMB >Boot video device is 0000:00:04.0 >PCI: Searching for i450NX host bridges on 0000:00:10.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PX0A._PRT] >ACPI: PCI Root Bridge [PX0B] (0000:01) >ACPI: PCI Interrupt Routing Table [\_SB_.PX0B._PRT] >ACPI: PCI Root Bridge [PX1A] (0000:02) >ACPI: PCI Interrupt Routing Table [\_SB_.PX1A._PRT] >ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10) *0, disabled. >ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10) *0, disabled. >ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10) *0, disabled. >ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10) >ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14) >ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14) >ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 10 11 12 14) *0, disabled. >ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 10 11 12 *14) >ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 10 11 12 14) *0, disabled. >ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 10 11 12 14) *0, disabled. >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 15 devices >SCSI subsystem initialized >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >pnp: 00:0b: ioport range 0x810-0x83f has been reserved >pnp: 00:0b: ioport range 0x850-0x85f has been reserved >pnp: 00:0b: ioport range 0x2c00-0x2c7f has been reserved >NET: Registered protocol family 2 >IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >TCP: Hash tables configured (established 131072 bind 65536) >TCP reno registered >highmem bounce pool size: 64 pages >squashfs: version 3.0 (2006/03/15) Phillip Lougher >SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled >SGI XFS Quota Management subsystem >Initializing Cryptographic API >io scheduler noop registered >io scheduler deadline registered (default) >initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) >vesafb: framebuffer at 0xf5000000, mapped to 0xf8880000, using 2048k, total 2048k >vesafb: mode is 1024x768x16, linelength=2048, pages=0 >vesafb: protected mode interface info at c000:4a66 >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >Console: switching to colour frame buffer device 128x48 >fb0: VESA VGA frame buffer device >isapnp: Scanning for PnP cards... >isapnp: No Plug & Play device found >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >mice: PS/2 mouse device common for all mice >RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize >loop: loaded (max 8 devices) >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >PIIX4: IDE controller at PCI slot 0000:00:02.1 >PCI: Enabling device 0000:00:02.1 (0000 -> 0001) >PIIX4: chipset revision 1 >PIIX4: not 100% native mode: will probe irqs later >PIIX4: neither IDE port enabled (BIOS) >PIIX4: IDE controller at PCI slot 0000:00:10.0 >PIIX4: device not capable of full native PCI mode >PIIX4: device disabled (BIOS) >PIIX4: IDE controller at PCI slot 0000:00:10.0 >PIIX4: device not capable of full native PCI mode >PIIX4: device disabled (BIOS) >Probing IDE interface ide0... >input: AT Translated Set 2 keyboard as /class/input/input0 >Probing IDE interface ide1... >md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 >md: bitmap version 4.39 >EISA: Probing bus 0 at eisa.0 >Cannot allocate resource for EISA slot 1 >Cannot allocate resource for EISA slot 2 >EISA: Detected 0 cards. >TCP bic registered >NET: Registered protocol family 1 >NET: Registered protocol family 17 >Starting balanced_irq >Using IPI Shortcut mode >Freeing unused kernel memory: 224k freed >ieee1394: Initialized config rom entry `ip1394' >ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) >ieee1394: sbp2: Try serialize_io=0 for better performance >libata version 1.20 loaded. >device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com >JFS: nTxBlock = 8092, nTxLock = 64742 >ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 16 >scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > <Adaptec aic7890/91 Ultra2 SCSI adapter> > aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs > > Vendor: IBM Model: DNES-309170Y Rev: SA30 > Type: Direct-Access ANSI SCSI revision: 03 >scsi0:A:1:0: Tagged Queuing enabled. Depth 32 > target0:0:1: Beginning Domain Validation > target0:0:1: wide asynchronous > target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target0:0:1: Domain Validation skipping write tests > target0:0:1: Ending Domain Validation >SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) >sda: Write Protect is off >sda: Mode Sense: c3 00 00 08 >SCSI device sda: drive cache: write back >SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) >sda: Write Protect is off >sda: Mode Sense: c3 00 00 08 >SCSI device sda: drive cache: write back > sda: sda1 sda2 >sd 0:0:1:0: Attached scsi disk sda >sd 0:0:1:0: Attached scsi generic sg0 type 0 > Vendor: DELL Model: 1x3 U2W SCSI BP Rev: 5.12 > Type: Processor ANSI SCSI revision: 02 > target0:0:6: Beginning Domain Validation > target0:0:6: Ending Domain Validation > 0:0:6:0: Attached scsi generic sg1 type 3 >ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 17 >scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > <Adaptec aic7860 Ultra SCSI adapter> > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > > Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.25 > Type: CD-ROM ANSI SCSI revision: 02 > target1:0:5: Beginning Domain Validation > target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) > target1:0:5: Domain Validation skipping write tests > target1:0:5: Ending Domain Validation >sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray >Uniform CD-ROM driver Revision: 3.20 >sr 1:0:5:0: Attached scsi CD-ROM sr0 >sr 1:0:5:0: Attached scsi generic sg2 type 5 >NCR53c406a: no available ports found >scsi: <fdomain> Detection failed (no card) >GDT-HA: Storage RAID Controller Driver. Version: 3.04 >GDT-HA: Found 0 PCI Storage RAID Controllers >qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! >NCR53c406a: no available ports found >sym53c416.c: Version 1.0.0-ac >Fusion MPT base driver 3.03.09 >Copyright (c) 1999-2005 LSI Logic Corporation >Fusion MPT SPI Host driver 3.03.09 >Fusion MPT FC Host driver 3.03.09 >3ware Storage Controller device driver for Linux v1.26.02.001. >3ware 9000 Storage Controller device driver for Linux v2.26.02.007. >Compaq SMART2 Driver (v 2.6.0) >HP CISS Driver (v 2.6.10) >Adaptec aacraid driver (1.1-5[2409]-mh1) >megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) >megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006) >megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006 >ISO 9660 Extensions: Microsoft Joliet Level 3 >Unable to load NLS charset iso8859-1 >Unable to load NLS charset iso8859-1 >ISO 9660 Extensions: RRIP_1991A >usbcore: registered new driver usbfs >usbcore: registered new driver hub >Real Time Clock Driver v1.12ac >USB Universal Host Controller Interface driver v3.0 >PCI: Enabling device 0000:00:02.2 (0000 -> 0001) >ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 19 (level, low) -> IRQ 18 >uhci_hcd 0000:00:02.2: UHCI Host Controller >uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 >uhci_hcd 0000:00:02.2: irq 18, io base 0x00001000 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 2 ports detected >hub 1-0:1.0: over-current change on port 1 >Uhhuh. NMI received. Dazed and confused, but trying to continue >You probably have a hardware problem with your RAM chips >hub 1-0:1.0: over-current change on port 2 >e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI >e100: Copyright(c) 1999-2005 Intel Corporation >ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 >ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11 >e100: eth0: e100_probe: addr 0xf6000000, irq 11, MAC addr 00:90:27:78:8A:55 >e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex >QLogic Fibre Channel HBA Driver >ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 18 >qla2xxx 0000:02:01.0: Found an ISP2100, irq 18, iobase 0xf90c6000 >qla2xxx 0000:02:01.0: Configuring PCI space... >qla2xxx 0000:02:01.0: Configure NVRAM parameters... >qla2xxx 0000:02:01.0: Verifying loaded RISC code... >qla2xxx 0000:02:01.0: Firmware image unavailable. >qla2xxx 0000:02:01.0: Failed to initialize adapter >Floppy drive(s): fd0 is 1.44M >FDC 0 is a National Semiconductor PC87306 >ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) >fbsplash: console 0 using theme 'livecd-2006.1' >fbsplash: switched splash state to 'on' on console 0 >NET: Registered protocol family 10 >lo: Disabled Privacy Extensions >IPv6 over IPv4 tunneling driver >eth0: no IPv6 routers present >ReiserFS: dm-3: found reiserfs format "3.6" with standard journal >ReiserFS: dm-3: using ordered data mode >ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: dm-3: checking transaction log (dm-3) >ReiserFS: dm-3: Using r5 hash to sort names >QLogic Fibre Channel HBA Driver >ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 18 >qla2xxx 0000:02:01.0: Found an ISP2100, irq 18, iobase 0xf9122000 >qla2xxx 0000:02:01.0: Configuring PCI space... >qla2xxx 0000:02:01.0: Configure NVRAM parameters... >qla2xxx 0000:02:01.0: Verifying loaded RISC code... >qla2xxx 0000:02:01.0: Waiting for LIP to complete... >qla2xxx 0000:02:01.0: LIP reset occured (f7f7). >qla2xxx 0000:02:01.0: LIP occured (f7f7). >qla2xxx 0000:02:01.0: LOOP UP detected (1 Gbps). >qla2xxx 0000:02:01.0: LIP reset occured (f7f7). >qla2xxx 0000:02:01.0: LIP occured (f7f7). >qla2xxx 0000:02:01.0: Topology - (Loop), Host Loop address 0x0 >scsi5 : qla2xxx >qla2xxx 0000:02:01.0: > QLogic Fibre Channel HBA Driver: 8.01.04-k > QLogic QLA2100 - > ISP2100: PCI (33 MHz) @ 0000:02:01.0 hdma-, host#=5, fw=1.19.25 TP > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdb: 17689267 512-byte hdwr sectors (9057 MB) >sdb: Write Protect is off >sdb: Mode Sense: d7 00 10 08 >SCSI device sdb: drive cache: write through w/ FUA >SCSI device sdb: 17689267 512-byte hdwr sectors (9057 MB) >sdb: Write Protect is off >sdb: Mode Sense: d7 00 10 08 >SCSI device sdb: drive cache: write through w/ FUA > sdb: sdb1 >sd 5:0:0:0: Attached scsi disk sdb >sd 5:0:0:0: Attached scsi generic sg3 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdc: 17689267 512-byte hdwr sectors (9057 MB) >sdc: Write Protect is off >sdc: Mode Sense: d7 00 10 08 >SCSI device sdc: drive cache: write through w/ FUA >SCSI device sdc: 17689267 512-byte hdwr sectors (9057 MB) >sdc: Write Protect is off >sdc: Mode Sense: d7 00 10 08 >SCSI device sdc: drive cache: write through w/ FUA > sdc: sdc1 >sd 5:0:1:0: Attached scsi disk sdc >sd 5:0:1:0: Attached scsi generic sg4 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdd: 17689267 512-byte hdwr sectors (9057 MB) >sdd: Write Protect is off >sdd: Mode Sense: d7 00 10 08 >SCSI device sdd: drive cache: write through w/ FUA >SCSI device sdd: 17689267 512-byte hdwr sectors (9057 MB) >sdd: Write Protect is off >sdd: Mode Sense: d7 00 10 08 >SCSI device sdd: drive cache: write through w/ FUA > sdd: sdd1 >sd 5:0:2:0: Attached scsi disk sdd >sd 5:0:2:0: Attached scsi generic sg5 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sde: 17689267 512-byte hdwr sectors (9057 MB) >sde: Write Protect is off >sde: Mode Sense: d7 00 10 08 >SCSI device sde: drive cache: write through w/ FUA >SCSI device sde: 17689267 512-byte hdwr sectors (9057 MB) >sde: Write Protect is off >sde: Mode Sense: d7 00 10 08 >SCSI device sde: drive cache: write through w/ FUA > sde: sde1 >sd 5:0:3:0: Attached scsi disk sde >sd 5:0:3:0: Attached scsi generic sg6 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdf: 17689267 512-byte hdwr sectors (9057 MB) >sdf: Write Protect is off >sdf: Mode Sense: d7 00 10 08 >SCSI device sdf: drive cache: write through w/ FUA >SCSI device sdf: 17689267 512-byte hdwr sectors (9057 MB) >sdf: Write Protect is off >sdf: Mode Sense: d7 00 10 08 >SCSI device sdf: drive cache: write through w/ FUA > sdf: sdf1 >sd 5:0:4:0: Attached scsi disk sdf >sd 5:0:4:0: Attached scsi generic sg7 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdg: 17689267 512-byte hdwr sectors (9057 MB) >sdg: Write Protect is off >sdg: Mode Sense: d7 00 10 08 >SCSI device sdg: drive cache: write through w/ FUA >SCSI device sdg: 17689267 512-byte hdwr sectors (9057 MB) >sdg: Write Protect is off >sdg: Mode Sense: d7 00 10 08 >SCSI device sdg: drive cache: write through w/ FUA > sdg: sdg1 >sd 5:0:5:0: Attached scsi disk sdg >sd 5:0:5:0: Attached scsi generic sg8 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdh: 17689267 512-byte hdwr sectors (9057 MB) >sdh: Write Protect is off >sdh: Mode Sense: d7 00 10 08 >SCSI device sdh: drive cache: write through w/ FUA >SCSI device sdh: 17689267 512-byte hdwr sectors (9057 MB) >sdh: Write Protect is off >sdh: Mode Sense: d7 00 10 08 >SCSI device sdh: drive cache: write through w/ FUA > sdh: sdh1 >sd 5:0:6:0: Attached scsi disk sdh >sd 5:0:6:0: Attached scsi generic sg9 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdi: 17689267 512-byte hdwr sectors (9057 MB) >sdi: Write Protect is off >sdi: Mode Sense: d7 00 10 08 >SCSI device sdi: drive cache: write through w/ FUA >SCSI device sdi: 17689267 512-byte hdwr sectors (9057 MB) >sdi: Write Protect is off >sdi: Mode Sense: d7 00 10 08 >SCSI device sdi: drive cache: write through w/ FUA > sdi: sdi1 >sd 5:0:7:0: Attached scsi disk sdi >sd 5:0:7:0: Attached scsi generic sg10 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdj: 17689267 512-byte hdwr sectors (9057 MB) >sdj: Write Protect is off >sdj: Mode Sense: d7 00 10 08 >SCSI device sdj: drive cache: write through w/ FUA >SCSI device sdj: 17689267 512-byte hdwr sectors (9057 MB) >sdj: Write Protect is off >sdj: Mode Sense: d7 00 10 08 >SCSI device sdj: drive cache: write through w/ FUA > sdj: sdj1 >sd 5:0:8:0: Attached scsi disk sdj >sd 5:0:8:0: Attached scsi generic sg11 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdk: 17689267 512-byte hdwr sectors (9057 MB) >sdk: Write Protect is off >sdk: Mode Sense: d7 00 10 08 >SCSI device sdk: drive cache: write through w/ FUA >SCSI device sdk: 17689267 512-byte hdwr sectors (9057 MB) >sdk: Write Protect is off >sdk: Mode Sense: d7 00 10 08 >SCSI device sdk: drive cache: write through w/ FUA > sdk: sdk1 >sd 5:0:9:0: Attached scsi disk sdk >sd 5:0:9:0: Attached scsi generic sg12 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdl: 17689267 512-byte hdwr sectors (9057 MB) >sdl: Write Protect is off >sdl: Mode Sense: d7 00 10 08 >SCSI device sdl: drive cache: write through w/ FUA >SCSI device sdl: 17689267 512-byte hdwr sectors (9057 MB) >sdl: Write Protect is off >sdl: Mode Sense: d7 00 10 08 >SCSI device sdl: drive cache: write through w/ FUA > sdl: sdl1 >sd 5:0:10:0: Attached scsi disk sdl >sd 5:0:10:0: Attached scsi generic sg13 type 0 > Vendor: SUN Model: SENA Rev: 1.09 > Type: Enclosure ANSI SCSI revision: 03 > 5:0:11:0: Attached scsi generic sg14 type 13 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdm: 17689267 512-byte hdwr sectors (9057 MB) >sdm: Write Protect is off >sdm: Mode Sense: d7 00 10 08 >SCSI device sdm: drive cache: write through w/ FUA >SCSI device sdm: 17689267 512-byte hdwr sectors (9057 MB) >sdm: Write Protect is off >sdm: Mode Sense: d7 00 10 08 >SCSI device sdm: drive cache: write through w/ FUA > sdm: sdm1 >sd 5:0:12:0: Attached scsi disk sdm >sd 5:0:12:0: Attached scsi generic sg15 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdn: 17689267 512-byte hdwr sectors (9057 MB) >sdn: Write Protect is off >sdn: Mode Sense: d7 00 10 08 >SCSI device sdn: drive cache: write through w/ FUA >SCSI device sdn: 17689267 512-byte hdwr sectors (9057 MB) >sdn: Write Protect is off >sdn: Mode Sense: d7 00 10 08 >SCSI device sdn: drive cache: write through w/ FUA > sdn: sdn1 >sd 5:0:13:0: Attached scsi disk sdn >sd 5:0:13:0: Attached scsi generic sg16 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdo: 17689267 512-byte hdwr sectors (9057 MB) >sdo: Write Protect is off >sdo: Mode Sense: d7 00 10 08 >SCSI device sdo: drive cache: write through w/ FUA >SCSI device sdo: 17689267 512-byte hdwr sectors (9057 MB) >sdo: Write Protect is off >sdo: Mode Sense: d7 00 10 08 >SCSI device sdo: drive cache: write through w/ FUA > sdo: sdo1 >sd 5:0:14:0: Attached scsi disk sdo >sd 5:0:14:0: Attached scsi generic sg17 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdp: 17689267 512-byte hdwr sectors (9057 MB) >sdp: Write Protect is off >sdp: Mode Sense: d7 00 10 08 >SCSI device sdp: drive cache: write through w/ FUA >SCSI device sdp: 17689267 512-byte hdwr sectors (9057 MB) >sdp: Write Protect is off >sdp: Mode Sense: d7 00 10 08 >SCSI device sdp: drive cache: write through w/ FUA > sdp: sdp1 >sd 5:0:15:0: Attached scsi disk sdp >sd 5:0:15:0: Attached scsi generic sg18 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdq: 17689267 512-byte hdwr sectors (9057 MB) >sdq: Write Protect is off >sdq: Mode Sense: d7 00 10 08 >SCSI device sdq: drive cache: write through w/ FUA >SCSI device sdq: 17689267 512-byte hdwr sectors (9057 MB) >sdq: Write Protect is off >sdq: Mode Sense: d7 00 10 08 >SCSI device sdq: drive cache: write through w/ FUA > sdq: sdq1 >sd 5:0:16:0: Attached scsi disk sdq >sd 5:0:16:0: Attached scsi generic sg19 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdr: 17689267 512-byte hdwr sectors (9057 MB) >sdr: Write Protect is off >sdr: Mode Sense: d7 00 10 08 >SCSI device sdr: drive cache: write through w/ FUA >SCSI device sdr: 17689267 512-byte hdwr sectors (9057 MB) >sdr: Write Protect is off >sdr: Mode Sense: d7 00 10 08 >SCSI device sdr: drive cache: write through w/ FUA > sdr: sdr1 >sd 5:0:17:0: Attached scsi disk sdr >sd 5:0:17:0: Attached scsi generic sg20 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sds: 17689267 512-byte hdwr sectors (9057 MB) >sds: Write Protect is off >sds: Mode Sense: d7 00 10 08 >SCSI device sds: drive cache: write through w/ FUA >SCSI device sds: 17689267 512-byte hdwr sectors (9057 MB) >sds: Write Protect is off >sds: Mode Sense: d7 00 10 08 >SCSI device sds: drive cache: write through w/ FUA > sds: sds1 >sd 5:0:18:0: Attached scsi disk sds >sd 5:0:18:0: Attached scsi generic sg21 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdt: 17689267 512-byte hdwr sectors (9057 MB) >sdt: Write Protect is off >sdt: Mode Sense: d7 00 10 08 >SCSI device sdt: drive cache: write through w/ FUA >SCSI device sdt: 17689267 512-byte hdwr sectors (9057 MB) >sdt: Write Protect is off >sdt: Mode Sense: d7 00 10 08 >SCSI device sdt: drive cache: write through w/ FUA > sdt: sdt1 >sd 5:0:19:0: Attached scsi disk sdt >sd 5:0:19:0: Attached scsi generic sg22 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdu: 17689267 512-byte hdwr sectors (9057 MB) >sdu: Write Protect is off >sdu: Mode Sense: d7 00 10 08 >SCSI device sdu: drive cache: write through w/ FUA >SCSI device sdu: 17689267 512-byte hdwr sectors (9057 MB) >sdu: Write Protect is off >sdu: Mode Sense: d7 00 10 08 >SCSI device sdu: drive cache: write through w/ FUA > sdu: sdu1 >sd 5:0:20:0: Attached scsi disk sdu >sd 5:0:20:0: Attached scsi generic sg23 type 0 > Vendor: SEAGATE Model: ST39102FCSUN9.0G Rev: 1129 > Type: Direct-Access ANSI SCSI revision: 02 >SCSI device sdv: 17689267 512-byte hdwr sectors (9057 MB) >sdv: Write Protect is off >sdv: Mode Sense: d7 00 10 08 >SCSI device sdv: drive cache: write through w/ FUA >SCSI device sdv: 17689267 512-byte hdwr sectors (9057 MB) >sdv: Write Protect is off >sdv: Mode Sense: d7 00 10 08 >SCSI device sdv: drive cache: write through w/ FUA > sdv: sdv1 >sd 5:0:21:0: Attached scsi disk sdv >sd 5:0:21:0: Attached scsi generic sg24 type 0 > Vendor: SUN Model: SENA Rev: 1.09 > Type: Enclosure ANSI SCSI revision: 03 > 5:0:22:0: Attached scsi generic sg25 type 13 >md: bind<dm-4> >md: bind<dm-5> >md: bind<dm-6> >raid5: automatically using best checksumming function: pIII_sse > pIII_sse : 1008.000 MB/sec >raid5: using function: pIII_sse (1008.000 MB/sec) >md: raid5 personality registered for level 5 >md: raid4 personality registered for level 4 >raid5: device dm-6 operational as raid disk 2 >raid5: device dm-5 operational as raid disk 1 >raid5: device dm-4 operational as raid disk 0 >raid5: allocated 3163kB for md2 >raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 0 >RAID5 conf printout: > --- rd:3 wd:3 fd:0 > disk 0, o:1, dev:dm-4 > disk 1, o:1, dev:dm-5 > disk 2, o:1, dev:dm-6 >md: bind<dm-7> >md: bind<dm-8> >md: bind<dm-9> >raid5: device dm-9 operational as raid disk 2 >raid5: device dm-8 operational as raid disk 1 >raid5: device dm-7 operational as raid disk 0 >raid5: allocated 3163kB for md3 >raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 0 >RAID5 conf printout: > --- rd:3 wd:3 fd:0 > disk 0, o:1, dev:dm-7 > disk 1, o:1, dev:dm-8 > disk 2, o:1, dev:dm-9 >md: bind<dm-10> >md: bind<dm-11> >md: bind<dm-12> >raid5: device dm-12 operational as raid disk 2 >raid5: device dm-11 operational as raid disk 1 >raid5: device dm-10 operational as raid disk 0 >raid5: allocated 3163kB for md4 >raid5: raid level 5 set md4 active with 3 out of 3 devices, algorithm 0 >RAID5 conf printout: > --- rd:3 wd:3 fd:0 > disk 0, o:1, dev:dm-10 > disk 1, o:1, dev:dm-11 > disk 2, o:1, dev:dm-12 >md: bind<dm-13> >md: bind<dm-14> >md: bind<dm-15> >raid5: device dm-15 operational as raid disk 2 >raid5: device dm-14 operational as raid disk 1 >raid5: device dm-13 operational as raid disk 0 >raid5: allocated 3163kB for md5 >raid5: raid level 5 set md5 active with 3 out of 3 devices, algorithm 0 >RAID5 conf printout: > --- rd:3 wd:3 fd:0 > disk 0, o:1, dev:dm-13 > disk 1, o:1, dev:dm-14 > disk 2, o:1, dev:dm-15 >md: bind<dm-16> >md: bind<dm-17> >md: bind<dm-18> >raid5: device dm-18 operational as raid disk 2 >raid5: device dm-17 operational as raid disk 1 >raid5: device dm-16 operational as raid disk 0 >raid5: allocated 3163kB for md6 >raid5: raid level 5 set md6 active with 3 out of 3 devices, algorithm 0 >RAID5 conf printout: > --- rd:3 wd:3 fd:0 > disk 0, o:1, dev:dm-16 > disk 1, o:1, dev:dm-17 > disk 2, o:1, dev:dm-18 >md: bind<dm-19> >md: bind<dm-20> >md: bind<dm-21> >md: bind<dm-22> >raid5: device dm-22 operational as raid disk 3 >raid5: device dm-21 operational as raid disk 2 >raid5: device dm-20 operational as raid disk 1 >raid5: device dm-19 operational as raid disk 0 >raid5: allocated 4204kB for md7 >raid5: raid level 5 set md7 active with 4 out of 4 devices, algorithm 0 >RAID5 conf printout: > --- rd:4 wd:4 fd:0 > disk 0, o:1, dev:dm-19 > disk 1, o:1, dev:dm-20 > disk 2, o:1, dev:dm-21 > disk 3, o:1, dev:dm-22 >md: bind<dm-25> >md: bind<dm-26> >md: raid1 personality registered for level 1 >raid1: raid set md0 active with 2 out of 2 mirrors
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 151414
:
99702
|
99703
| 99704