debug output from usb-storage

kernel (text/plain), 68.90 KB, created by Wernfried Haas (RETIRED) on 2006-09-29 23:40:06 UTC

Oct  8 20:15:01 [kernel] usb 1-1.3: new full speed USB device using uhci_hcd and address 5
Oct  8 20:15:06 [kernel] DEV: registering device: ID = '1-1.3'
Oct  8 20:15:06 [kernel] PM: Adding info for usb:1-1.3
Oct  8 20:15:06 [kernel] bus usb: add device 1-1.3
Oct  8 20:15:06 [kernel] bound device '1-1.3' to driver 'usb'
Oct  8 20:15:06 [kernel] DEV: registering device: ID = 'usbdev1.5_ep00'
Oct  8 20:15:06 [kernel] PM: Adding info for No Bus:usbdev1.5_ep00
Oct  8 20:15:06 [kernel] usb 1-1.3: configuration #1 chosen from 1 choice
Oct  8 20:15:06 [kernel] DEV: registering device: ID = '1-1.3:1.0'
Oct  8 20:15:06 [kernel] PM: Adding info for usb:1-1.3:1.0
Oct  8 20:15:06 [kernel] bus usb: add device 1-1.3:1.0
Oct  8 20:15:06 [kernel] usb: Matched Device 1-1.3:1.0 with Driver libusual
Oct  8 20:15:06 [kernel] DEV: registering device: ID = 'usbdev1.5_ep01'
Oct  8 20:15:06 [kernel] PM: Adding info for No Bus:usbdev1.5_ep01
Oct  8 20:15:06 [kernel] DEV: registering device: ID = 'usbdev1.5_ep82'
Oct  8 20:15:06 [kernel] PM: Adding info for No Bus:usbdev1.5_ep82
Oct  8 20:15:06 [kernel] CLASS: registering class device: ID = 'usbdev1.5'
Oct  8 20:15:06 [kernel] class_uevent - name = usbdev1.5
Oct  8 20:15:06 [kernel] class_device_create_uevent called for usbdev1.5
Oct  8 20:15:06 [kernel] Initializing USB Mass Storage driver...
Oct  8 20:15:06 [kernel] bus usb: add driver usb-storage
Oct  8 20:15:06 [kernel] usb: Matched Device 1-1.3:1.0 with Driver usb-storage
Oct  8 20:15:06 [kernel] usb-storage: USB Mass Storage device detected
Oct  8 20:15:06 [kernel] usb-storage: -- associate_dev
Oct  8 20:15:06 [kernel] usb-storage: Vendor: 0x0aec, Product: 0x3260, Revision: 0x020a
Oct  8 20:15:06 [kernel] usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Oct  8 20:15:06 [kernel] usb-storage: Transport: Bulk
Oct  8 20:15:06 [kernel] usb-storage: Protocol: Transparent SCSI
Oct  8 20:15:06 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:06 [kernel] scsi0 : SCSI emulation for USB Mass Storage devices
Oct  8 20:15:06 [kernel] DEV: registering device: ID = 'host0'
Oct  8 20:15:06 [kernel] PM: Adding info for No Bus:host0
Oct  8 20:15:06 [kernel] CLASS: registering class device: ID = 'host0'
Oct  8 20:15:06 [kernel] class_uevent - name = host0
Oct  8 20:15:06 [kernel] usb-storage: device found at 5
Oct  8 20:15:06 [kernel] usb-storage: waiting for device to settle before scanning
Oct  8 20:15:06 [kernel] bound device '1-1.3:1.0' to driver 'usb-storage'
Oct  8 20:15:06 [kernel] usb: Bound Device 1-1.3:1.0 to Driver usb-storage
Oct  8 20:15:06 [kernel] usbcore: registered new driver usb-storage
Oct  8 20:15:06 [kernel] USB Mass Storage support registered.
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Oct  8 20:15:11 [kernel] usb-storage: GetMaxLUN command result is 1, data is 3
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:0'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:0
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Command INQUIRY (6 bytes)
Oct  8 20:15:11 [kernel] usb-storage:  12 00 00 00 24 00
Oct  8 20:15:11 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 36/36
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:11 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:11 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel]   Vendor: GENERIC   Model: USB Storage-CFC   Rev: I19B
Oct  8 20:15:11 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
Oct  8 20:15:11 [kernel] DEV: registering device: ID = '0:0:0:0'
Oct  8 20:15:11 [kernel] PM: Adding info for scsi:0:0:0:0
Oct  8 20:15:11 [kernel] bus scsi: add device 0:0:0:0
Oct  8 20:15:11 [kernel] CLASS: registering class device: ID = '0:0:0:0'
Oct  8 20:15:11 [kernel] class_uevent - name = 0:0:0:0
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Command INQUIRY (6 bytes)
Oct  8 20:15:11 [kernel] usb-storage:  12 20 00 00 24 00
Oct  8 20:15:11 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x2 L 36 F 128 Trg 0 LUN 1 CL 6
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 36/36
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:11 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:11 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel]   Vendor: GENERIC   Model: USB Storage-MSC   Rev: I19B
Oct  8 20:15:11 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
Oct  8 20:15:11 [kernel] DEV: registering device: ID = '0:0:0:1'
Oct  8 20:15:11 [kernel] PM: Adding info for scsi:0:0:0:1
Oct  8 20:15:11 [kernel] bus scsi: add device 0:0:0:1
Oct  8 20:15:11 [kernel] CLASS: registering class device: ID = '0:0:0:1'
Oct  8 20:15:11 [kernel] class_uevent - name = 0:0:0:1
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Command INQUIRY (6 bytes)
Oct  8 20:15:11 [kernel] usb-storage:  12 40 00 00 24 00
Oct  8 20:15:11 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x3 L 36 F 128 Trg 0 LUN 2 CL 6
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 36/36
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:11 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:11 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel]   Vendor: GENERIC   Model: USB Storage-SMC   Rev: I19B
Oct  8 20:15:11 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
Oct  8 20:15:11 [kernel] DEV: registering device: ID = '0:0:0:2'
Oct  8 20:15:11 [kernel] PM: Adding info for scsi:0:0:0:2
Oct  8 20:15:11 [kernel] bus scsi: add device 0:0:0:2
Oct  8 20:15:11 [kernel] CLASS: registering class device: ID = '0:0:0:2'
Oct  8 20:15:11 [kernel] class_uevent - name = 0:0:0:2
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Command INQUIRY (6 bytes)
Oct  8 20:15:11 [kernel] usb-storage:  12 60 00 00 24 00
Oct  8 20:15:11 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x4 L 36 F 128 Trg 0 LUN 3 CL 6
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 36/36
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:11 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:11 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:11 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:11 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:11 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:11 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel]   Vendor: GENERIC   Model: USB Storage-SDC   Rev: I19B
Oct  8 20:15:11 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
Oct  8 20:15:11 [kernel] DEV: registering device: ID = '0:0:0:3'
Oct  8 20:15:11 [kernel] PM: Adding info for scsi:0:0:0:3
Oct  8 20:15:11 [kernel] bus scsi: add device 0:0:0:3
Oct  8 20:15:11 [kernel] CLASS: registering class device: ID = '0:0:0:3'
Oct  8 20:15:11 [kernel] class_uevent - name = 0:0:0:3
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad LUN (0:4)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:1'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:1
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (1:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:1
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:2'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:2
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (2:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:2
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:3'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:3
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (3:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:3
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:4'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:4
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (4:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:4
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:5'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:5
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (5:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:5
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:6'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:6
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (6:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:6
Oct  8 20:15:11 [kernel] DEV: registering device: ID = 'target0:0:7'
Oct  8 20:15:11 [kernel] PM: Adding info for No Bus:target0:0:7
Oct  8 20:15:11 [kernel] usb-storage: queuecommand called
Oct  8 20:15:11 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:11 [kernel] usb-storage: Bad target number (7:0)
Oct  8 20:15:11 [kernel] usb-storage: scsi cmd done, result=0x40000
Oct  8 20:15:11 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:11 [kernel] PM: Removing info for No Bus:target0:0:7
Oct  8 20:15:11 [kernel] usb-storage: device scan complete
Oct  8 20:15:12 [kernel] device class 'scsi_disk': registering
Oct  8 20:15:12 [kernel] bus scsi: add driver sd
Oct  8 20:15:12 [kernel] scsi: Matched Device 0:0:0:0 with Driver sd
Oct  8 20:15:12 [kernel] CLASS: registering class device: ID = '0:0:0:0'
Oct  8 20:15:12 [kernel] class_uevent - name = 0:0:0:0
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 00 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x5 L 0 F 0 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x6 L 18 F 128 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 00 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x7 L 0 F 0 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x8 L 18 F 128 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 00 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xa L 18 F 128 Trg 0 LUN 0 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sd 0:0:0:0: Attached scsi removable disk sda
Oct  8 20:15:12 [kernel] bound device '0:0:0:0' to driver 'sd'
Oct  8 20:15:12 [kernel] scsi: Bound Device 0:0:0:0 to Driver sd
Oct  8 20:15:12 [kernel] scsi: Matched Device 0:0:0:1 with Driver sd
Oct  8 20:15:12 [kernel] CLASS: registering class device: ID = '0:0:0:1'
Oct  8 20:15:12 [kernel] class_uevent - name = 0:0:0:1
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 20 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xb L 0 F 0 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xc L 18 F 128 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 20 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xd L 0 F 0 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xe L 18 F 128 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 20 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0xf L 0 F 0 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x10 L 18 F 128 Trg 0 LUN 1 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sd 0:0:0:1: Attached scsi removable disk sdb
Oct  8 20:15:12 [kernel] bound device '0:0:0:1' to driver 'sd'
Oct  8 20:15:12 [kernel] scsi: Bound Device 0:0:0:1 to Driver sd
Oct  8 20:15:12 [kernel] scsi: Matched Device 0:0:0:2 with Driver sd
Oct  8 20:15:12 [kernel] CLASS: registering class device: ID = '0:0:0:2'
Oct  8 20:15:12 [kernel] class_uevent - name = 0:0:0:2
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 40 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x11 L 0 F 0 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x12 L 18 F 128 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 40 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x13 L 0 F 0 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x14 L 18 F 128 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 40 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x15 L 0 F 0 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x16 L 18 F 128 Trg 0 LUN 2 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Not Ready: Medium not present
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sd 0:0:0:2: Attached scsi removable disk sdc
Oct  8 20:15:12 [kernel] bound device '0:0:0:2' to driver 'sd'
Oct  8 20:15:12 [kernel] scsi: Bound Device 0:0:0:2 to Driver sd
Oct  8 20:15:12 [kernel] scsi: Matched Device 0:0:0:3 with Driver sd
Oct  8 20:15:12 [kernel] CLASS: registering class device: ID = '0:0:0:3'
Oct  8 20:15:12 [kernel] class_uevent - name = 0:0:0:3
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x17 L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x1
Oct  8 20:15:12 [kernel] usb-storage: -- transport indicates command failure
Oct  8 20:15:12 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x18 L 18 F 128 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 18/18
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: -- Result from auto-sense is 0
Oct  8 20:15:12 [kernel] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
Oct  8 20:15:12 [kernel] usb-storage: Unit Attention: Not ready to ready change, medium may have changed
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x2
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x19 L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_CAPACITY (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  25 60 00 00 00 00 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1a L 8 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 8/8
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] SCSI device sdd: 1955328 512-byte hdwr sectors (1001 MB)
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command MODE_SENSE (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1a 60 3f 00 c0 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1b L 192 F 128 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code -121; transferred 4/192
Oct  8 20:15:12 [kernel] usb-storage: -- short read transfer
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x1
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1b R 188 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sdd: Write Protect is off
Oct  8 20:15:12 [kernel] sdd: Mode Sense: 03 00 00 00
Oct  8 20:15:12 [kernel] sdd: assuming drive cache: write through
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1c L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1e 60 00 00 01 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1d L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1d R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1e L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1e R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_CAPACITY (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  25 60 00 00 00 00 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1f L 8 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 8/8
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] SCSI device sdd: 1955328 512-byte hdwr sectors (1001 MB)
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command MODE_SENSE (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1a 60 3f 00 c0 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x20 L 192 F 128 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code -121; transferred 4/192
Oct  8 20:15:12 [kernel] usb-storage: -- short read transfer
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x1
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x20 R 188 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sdd: Write Protect is off
Oct  8 20:15:12 [kernel] sdd: Mode Sense: 03 00 00 00
Oct  8 20:15:12 [kernel] sdd: assuming drive cache: write through
Oct  8 20:15:12 [kernel]  sdd:<7>usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 00 00 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x21 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel]  sdd: p1 exceeds device capacity
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1e 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x22 L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] sd 0:0:0:3: Attached scsi removable disk sdd
Oct  8 20:15:12 [kernel] bound device '0:0:0:3' to driver 'sd'
Oct  8 20:15:12 [kernel] scsi: Bound Device 0:0:0:3 to Driver sd
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  00 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x23 L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1e 60 00 00 01 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910272
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910273
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910274
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910275
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910276
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910277
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910278
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910279
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910272
Oct  8 20:15:12 [kernel] Buffer I/O error on device sdd1, logical block 3910273
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 00 81 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x25 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 00 89 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x26 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 02 59 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x27 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 02 61 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x28 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 02 69 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x29 L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x29 R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 02 71 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x2a L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x2a R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command READ_10 (10 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  28 60 00 00 02 79 00 00 08 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x2b L 4096 F 128 Trg 0 LUN 3 CL 10
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 4096/4096
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk data transfer result 0x0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x2b R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.
Oct  8 20:15:12 [kernel] usb-storage: queuecommand called
Oct  8 20:15:12 [kernel] usb-storage: *** thread awakened.
Oct  8 20:15:12 [kernel] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Oct  8 20:15:12 [kernel] usb-storage:  1e 60 00 00 00 00
Oct  8 20:15:12 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x2c L 0 F 0 Trg 0 LUN 3 CL 6
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 31/31
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk command transfer result=0
Oct  8 20:15:12 [kernel] usb-storage: Attempting to get CSW...
Oct  8 20:15:12 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Oct  8 20:15:12 [kernel] usb-storage: Status code 0; transferred 13/13
Oct  8 20:15:12 [kernel] usb-storage: -- transfer complete
Oct  8 20:15:12 [kernel] usb-storage: Bulk status result = 0
Oct  8 20:15:12 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x2c R 0 Stat 0x0
Oct  8 20:15:12 [kernel] usb-storage: scsi cmd done, result=0x0
Oct  8 20:15:12 [kernel] usb-storage: *** thread sleeping.