Attachment 89541 Details for Bug 137269 – dmesg

dmesg

dmesg.txt (text/plain), 20.06 KB, created by Benedicto Sérgio de Almeida Santiago on 2006-06-19 09:14:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benedicto Sérgio de Almeida Santiago

Created: 2006-06-19 09:14:52 UTC

Size: 20.06 KB

patch

obsolete

>[17179569.184000] Linux version 2.6.15-gentoo-r1bsasantiago (root@livecd) (gcc version 3.4.5 (Gentoo 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #2 SMP PREEMPT Thu Apr 13 22:34:11 BRT 2006
>[17179569.184000] BIOS-provided physical RAM map:
>[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
>[17179569.184000]  BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
>[17179569.184000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
>[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
>[17179569.184000]  BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
>[17179569.184000]  BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[17179569.184000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
>[17179569.184000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>[17179569.184000] 255MB LOWMEM available.
>[17179569.184000] On node 0 totalpages: 65472
>[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
>[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
>[17179569.184000]   Normal zone: 61376 pages, LIFO batch:15
>[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
>[17179569.184000] DMI 2.3 present.
>[17179569.184000] ACPI: RSDP (v000 AMI                                   ) @ 0x000ff980
>[17179569.184000] ACPI: RSDT (v001 D845HV WN84510A 0x20030525 MSFT 0x00001011) @ 0x0fff0000
>[17179569.184000] ACPI: FADT (v001 D845HV HV84510A 0x20030525 MSFT 0x00001011) @ 0x0fff1000
>[17179569.184000] ACPI: MADT (v001 D845HV HV84510A 0x20030525 MSFT 0x00001011) @ 0x0ffe2ea2
>[17179569.184000] ACPI: DSDT (v002 D845HV HV84510A 0x00000006 MSFT 0x0100000b) @ 0x00000000
>[17179569.184000] ACPI: Local APIC address 0xfee00000
>[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[17179569.184000] Processor #0 15:2 APIC version 20
>[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[17179569.184000] ACPI: IRQ0 used by override.
>[17179569.184000] ACPI: IRQ2 used by override.
>[17179569.184000] ACPI: IRQ9 used by override.
>[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[17179569.184000] Using ACPI (MADT) for SMP configuration information
>[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>[17179569.184000] Built 1 zonelists
>[17179569.184000] Kernel command line: BOOT_IMAGE=Gentoo ro root=343 init=/linuxrc ramdisk=8192 real_root=/dev/hdb3
>[17179569.184000] mapped APIC to ffffd000 (fee00000)
>[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
>[17179569.184000] Initializing CPU#0
>[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
>[    0.000000] Detected 1595.137 MHz processor.
>[   14.726029] Using tsc for high-res timesource
>[   14.727658] Console: colour VGA+ 80x25
>[   14.731494] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>[   14.732232] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>[   14.744643] Memory: 253068k/261888k available (3873k kernel code, 8316k reserved, 1091k data, 216k init, 0k highmem)
>[   14.744768] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>[   14.823333] Calibrating delay using timer specific routine.. 3195.53 BogoMIPS (lpj=6391062)
>[   14.823613] Mount-cache hash table entries: 512
>[   14.823871] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>[   14.823887] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>[   14.823904] CPU: Trace cache: 12K uops, L1 D cache: 8K
>[   14.824087] CPU: L2 cache: 512K
>[   14.824183] CPU: Hyper-Threading is disabled
>[   14.824281] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
>[   14.824294] Intel machine check architecture supported.
>[   14.824399] Intel machine check reporting enabled on CPU#0.
>[   14.824500] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>[   14.824602] CPU0: Thermal monitoring enabled
>[   14.824714] mtrr: v2.0 (20020519)
>[   14.824817] Enabling fast FPU save and restore... done.
>[   14.824999] Enabling unmasked SIMD FPU exception support... done.
>[   14.825187] Checking 'hlt' instruction... OK.
>[   14.849617] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
>[   14.849943] Total of 1 processors activated (3195.53 BogoMIPS).
>[   14.850143] ENABLING IO-APIC IRQs
>[   14.850442] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>[   14.995118] Brought up 1 CPUs
>[   14.995872] NET: Registered protocol family 16
>[   14.996024] ACPI: bus type pci registered
>[   14.996289] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
>[   14.996401] PCI: Using configuration type 1
>[   14.997251] ACPI: Subsystem revision 20050902
>[   15.006319] ACPI: Interpreter enabled
>[   15.006424] ACPI: Using IOAPIC for interrupt routing
>[   15.007267] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[   15.007371] PCI: Probing PCI hardware (bus 00)
>[   15.009910] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>[   15.010015] PCI quirk: region 0500-053f claimed by ICH4 GPIO
>[   15.010556] Boot video device is 0000:01:00.0
>[   15.010920] PCI: Transparent bridge - 0000:00:1e.0
>[   15.011074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[   15.013086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>[   15.014955] ACPI: Power Resource [FDDP] (off)
>[   15.015751] ACPI: Power Resource [URP1] (off)
>[   15.016474] ACPI: Power Resource [URP2] (off)
>[   15.017472] ACPI: Power Resource [LPTP] (off)
>[   15.019197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>[   15.020731] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>[   15.022263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   15.023979] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>[   15.025507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   15.027243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>[   15.028783] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   15.030482] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>[   15.031895] Linux Plug and Play Support v0.97 (c) Adam Belay
>[   15.032012] pnp: PnP ACPI init
>[   15.036935] pnp: PnP ACPI: found 12 devices
>[   15.037287] SCSI subsystem initialized
>[   15.037477] usbcore: registered new driver usbfs
>[   15.037629] usbcore: registered new driver hub
>[   15.037828] PCI: Using ACPI for IRQ routing
>[   15.037930] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>[   15.042332] Bluetooth: Core ver 2.8
>[   15.042432] NET: Registered protocol family 31
>[   15.042529] Bluetooth: HCI device and connection manager initialized
>[   15.042638] Bluetooth: HCI socket layer initialized
>[   15.043579] PCI: Bridge: 0000:00:01.0
>[   15.043680]   IO window: disabled.
>[   15.043781]   MEM window: fc900000-fe9fffff
>[   15.043881]   PREFETCH window: ee600000-f26fffff
>[   15.043983] PCI: Bridge: 0000:00:1e.0
>[   15.044082]   IO window: d000-dfff
>[   15.044184]   MEM window: fea00000-feafffff
>[   15.044285]   PREFETCH window: f2700000-f47fffff
>[   15.044408] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>[   15.044560] Machine check exception polling timer started.
>[   15.047591] audit: initializing netlink socket (disabled)
>[   15.047714] audit(1150719513.788:1): initialized
>[   15.048136] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   15.049032] NTFS driver 2.1.25 [Flags: R/W].
>[   15.049193] JFS: nTxBlock = 1977, nTxLock = 15823
>[   15.052515] SGI XFS with no debug enabled
>[   15.053045] Initializing Cryptographic API
>[   15.053151] io scheduler noop registered
>[   15.053342] io scheduler anticipatory registered
>[   15.053531] io scheduler deadline registered
>[   15.053733] io scheduler cfq registered
>[   15.054332] ACPI: Power Button (FF) [PWRF]
>[   15.054457] ACPI: Power Button (CM) [PBTN]
>[   15.083882] lp: driver loaded but no devices found
>[   15.084066] hw_random hardware driver 1.0.0 loaded
>[   15.084167] Linux agpgart interface v0.101 (c) Dave Jones
>[   15.084332] agpgart: Detected an Intel i845 Chipset.
>[   15.088828] agpgart: AGP aperture is 64M @ 0xf8000000
>[   15.088991] [drm] Initialized drm 1.0.0 20040925
>[   15.089288] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[   15.091686] serio: i8042 AUX port at 0x60,0x64 irq 12
>[   15.091928] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   15.092099] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>[   15.092357] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   15.092678] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[   15.093540] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   15.093911] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[   15.094237] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 16
>[   15.094440] ACPI: PCI interrupt for device 0000:02:0d.0 disabled
>[   15.094622] parport: PnPBIOS parport detected.
>[   15.094746] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>[   15.116273] parport0: Printer, HEWLETT-PACKARD DESKJET 930C
>[   15.116708] lp0: using parport0 (interrupt-driven).
>[   15.117022] mice: PS/2 mouse device common for all mice
>[   15.117533] Floppy drive(s): fd0 is 1.44M
>[   15.134576] FDC 0 is a post-1991 82077
>[   15.135739] pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
>[   15.135944] nbd: registered device at major 43
>[   15.137024] PPP generic driver version 2.4.2
>[   15.137184] PPP Deflate Compression module registered
>[   15.137284] PPP BSD Compression module registered
>[   15.137386] PPP MPPE Compression module registered
>[   15.137486] NET: Registered protocol family 24
>[   15.137655] 8139too Fast Ethernet driver 0.9.27
>[   15.137789] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 17
>[   15.138587] eth0: RealTek RTL8139 at 0xd800, 00:e0:7d:d0:93:2b, IRQ 17
>[   15.138689] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>[   15.138719] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 17 (level, low) -> IRQ 18
>[   15.139499] eth1: RealTek RTL8139 at 0xd400, 00:40:f4:42:6b:0c, IRQ 18
>[   15.139601] eth1:  Identified 8139 chip type 'RTL-8139C'
>[   15.139610] Linux video capture interface: v1.00
>[   15.139716] Colour QuickCam for Video4Linux v0.05
>[   15.140844] input: AT Translated Set 2 keyboard as /class/input/input0
>[   15.403497] input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>[   15.643739] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>[   15.643844] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>[   15.644016] ICH2: IDE controller at PCI slot 0000:00:1f.1
>[   15.644132] ICH2: chipset revision 18
>[   15.644229] ICH2: not 100% native mode: will probe irqs later
>[   15.644342]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>[   15.644640]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
>[   15.644929] Probing IDE interface ide0...
>[   15.933688] hda: ST380011A, ATA DISK drive
>[   16.225205] hdb: Maxtor 2B020H1, ATA DISK drive
>[   16.285438] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[   16.285768] Probing IDE interface ide1...
>[   17.023892] hdc: HL-DT-ST RW/DVD GCC-4120B, ATAPI CD/DVD-ROM drive
>[   17.810596] hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
>[   17.872252] ide1 at 0x170-0x177,0x376 on irq 15
>[   17.872985] hda: max request size: 1024KiB
>[   17.873648] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
>[   17.874246] hda: cache flushes supported
>[   17.874447]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3
>[   17.961689] hdb: max request size: 1024KiB
>[   17.962914] hdb: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
>[   17.963483] hdb: cache flushes supported
>[   17.964211]  hdb: hdb1 hdb2 hdb3
>[   17.969132] hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
>[   17.969818] Uniform CD-ROM driver Revision: 3.20
>[   18.858563] hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>[   18.862930] ide-floppy driver 0.99.newide
>[   18.863112] libata version 1.20 loaded.
>[   18.863483] ieee1394: raw1394: /dev/raw1394 device initialized
>[   18.863789] usbmon: debugfs is not available
>[   18.863940] USB Universal Host Controller Interface driver v2.3
>[   18.864139] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
>[   18.864347] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>[   18.864353] uhci_hcd 0000:00:1f.2: UHCI Host Controller
>[   18.864564] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>[   18.864696] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ef40
>[   18.865080] hub 1-0:1.0: USB hub found
>[   18.865193] hub 1-0:1.0: 2 ports detected
>[   18.972649] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17
>[   18.972851] PCI: Setting latency timer of device 0000:00:1f.4 to 64
>[   18.972857] uhci_hcd 0000:00:1f.4: UHCI Host Controller
>[   18.973031] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>[   18.973151] uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000ef80
>[   18.973471] hub 2-0:1.0: USB hub found
>[   18.973581] hub 2-0:1.0: 2 ports detected
>[   19.216112] usb 1-1: new full speed USB device using uhci_hcd and address 2
>[   19.475998] usbcore: registered new driver usblp
>[   19.476100] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>[   19.476204] Initializing USB Mass Storage driver...
>[   19.719285] usb 2-2: new full speed USB device using uhci_hcd and address 2
>[   19.863734] hub 2-2:1.0: USB hub found
>[   19.865667] hub 2-2:1.0: 4 ports detected
>[   19.979015] usbcore: registered new driver usb-storage
>[   19.979116] USB Mass Storage support registered.
>[   20.203043] usb 2-2.2: new full speed USB device using uhci_hcd and address 3
>[   20.439670] usbcore: registered new driver usbhid
>[   20.439773] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>[   20.439886] Linux telephony interface: v1.00
>[   20.439990] padlock: VIA PadLock not detected.
>[   20.440285] Intel 810 + AC97 Audio, version 1.01, 22:31:30 Apr 13 2006
>[   20.440464] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
>[   20.440688] PCI: Setting latency timer of device 0000:00:1f.5 to 64
>[   20.440696] i810: Intel ICH2 found at IO 0xef00 and 0xe800, MEM 0x0000 and 0x0000, IRQ 18
>[   20.941355] i810_audio: Audio Controller supports 6 channels.
>[   20.941467] i810_audio: Defaulting to base 2 channel mode.
>[   20.941568] i810_audio: Resetting connection 0
>[   20.942000] ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
>[   20.942770] i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
>[   20.992912] Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
>[   20.993096] can't register device seq
>[   20.993339] ALSA device list:
>[   20.993435]   No soundcards found.
>[   20.993582] oprofile: using NMI interrupt.
>[   20.993751] NET: Registered protocol family 2
>[   21.029222] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>[   21.029548] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>[   21.029971] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
>[   21.030384] TCP: Hash tables configured (established 16384 bind 16384)
>[   21.030486] TCP reno registered
>[   21.030631] ip_conntrack version 2.4 (2046 buckets, 16368 max) - 212 bytes per conntrack
>[   21.125073] ip_tables: (C) 2000-2002 Netfilter core team
>[   21.292694] ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
>[   21.292852] arp_tables: (C) 2002 David S. Miller
>[   21.328653] TCP bic registered
>[   21.328777] NET: Registered protocol family 1
>[   21.328885] NET: Registered protocol family 17
>[   21.329060] Using IPI Shortcut mode
>[   21.357649] EXT3-fs: mounted filesystem with ordered data mode.
>[   21.357790] VFS: Mounted root (ext3 filesystem) readonly.
>[   21.358393] Freeing unused kernel memory: 216k freed
>[   21.358561] kjournald starting.  Commit interval 5 seconds
>[   21.555713] Failed to execute /linuxrc.  Attempting defaults...
>[   27.426640] Adding 1028120k swap on /dev/hda7.  Priority:-1 extents:1 across:1028120k
>[   27.445943] Adding 506036k swap on /dev/hdb2.  Priority:-2 extents:1 across:506036k
>[   27.646745] EXT3 FS on hdb3, internal journal
>[   38.292497] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>[   42.304405] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   42.304776] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   42.304959] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   42.305138] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   42.305312] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=4 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   43.304759] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=242 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=222 
>[   44.307076] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=5 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   44.307142] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=6 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   44.307191] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=7 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   44.307239] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=8 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   44.307290] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=9 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   45.305359] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=10 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   45.305435] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=11 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   45.305484] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=12 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   45.305533] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=13 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   45.305582] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=14 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   46.303715] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=15 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   46.303790] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=16 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   46.303839] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=17 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   46.303888] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=18 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[   46.303937] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=19 DF PROTO=UDP SPT=137 DPT=137 LEN=76 
>[  117.191136] Inbound IN=eth1 OUT= MAC= SRC=201.6.133.146 DST=201.6.135.255 LEN=242 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=138 DPT=138 LEN=222

Actions: View

Attachments on bug 137269: 89541 | 89567 | 89605 | 89650