the actual oops

kernel-oops.txt (text/plain), 37.09 KB, created by Michiel Roeleveld on 2006-05-31 00:30:34 UTC

May 31 09:58:28 [kernel] Linux version 2.6.16-suspend2-r7 (root@cc6489-b) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 PREEMPT Tue May 30 11:46:28 CEST 2006
May 31 09:58:28 [kernel] BIOS-provided physical RAM map:
May 31 09:58:28 [kernel]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
May 31 09:58:28 [kernel]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 31 09:58:28 [kernel]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
May 31 09:58:28 [kernel]  BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
May 31 09:58:28 [kernel]  BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
May 31 09:58:28 [kernel]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
May 31 09:58:28 [kernel]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 31 09:58:28 [kernel]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
May 31 09:58:28 [kernel] 767MB LOWMEM available.
May 31 09:58:28 [kernel] found SMP MP-table at 000f5e40
May 31 09:58:28 [kernel] On node 0 totalpages: 196592
May 31 09:58:28 [kernel]   DMA zone: 4096 pages, LIFO batch:0
May 31 09:58:28 [kernel]   DMA32 zone: 0 pages, LIFO batch:0
May 31 09:58:28 [kernel]   Normal zone: 192496 pages, LIFO batch:31
May 31 09:58:28 [kernel]   HighMem zone: 0 pages, LIFO batch:0
May 31 09:58:28 [kernel] DMI 2.2 present.
May 31 09:58:28 [kernel] ACPI: RSDP (v000 VIA694                                ) @ 0x000f7880
May 31 09:58:28 [kernel] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
May 31 09:58:28 [kernel] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
May 31 09:58:28 [kernel] ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff7200
May 31 09:58:28 [kernel] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
May 31 09:58:28 [kernel] ACPI: PM-Timer IO Port: 0x4008
May 31 09:58:28 [kernel] ACPI: Local APIC address 0xfee00000
May 31 09:58:28 [kernel] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 31 09:58:28 [kernel] Processor #0 6:6 APIC version 16
May 31 09:58:28 [kernel] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May 31 09:58:28 [kernel] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 31 09:58:28 [kernel] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
May 31 09:58:28 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 31 09:58:28 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
May 31 09:58:28 [kernel] ACPI: IRQ0 used by override.
May 31 09:58:28 [kernel] ACPI: IRQ2 used by override.
May 31 09:58:28 [kernel] ACPI: IRQ9 used by override.
May 31 09:58:28 [kernel] Enabling APIC mode:  Flat.  Using 1 I/O APICs
May 31 09:58:28 [kernel] Using ACPI (MADT) for SMP configuration information
May 31 09:58:28 [kernel] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
May 31 09:58:28 [kernel] Built 1 zonelists
May 31 09:58:28 [kernel] Kernel command line: root=/dev/hda8 resume2=swap:/dev/hda7
May 31 09:58:28 [kernel] mapped APIC to ffffd000 (fee00000)
May 31 09:58:28 [kernel] mapped IOAPIC to ffffc000 (fec00000)
May 31 09:58:28 [kernel] Enabling fast FPU save and restore... done.
May 31 09:58:28 [kernel] Initializing CPU#0
May 31 09:58:28 [kernel] PID hash table entries: 4096 (order: 12, 65536 bytes)
May 31 09:58:28 [kernel] Detected 1537.100 MHz processor.
May 31 09:58:28 [kernel] Using pmtmr for high-res timesource
May 31 09:58:28 [kernel] Console: colour VGA+ 80x25
May 31 09:58:28 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 31 09:58:28 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 31 09:58:28 [kernel] Memory: 776060k/786368k available (1708k kernel code, 9820k reserved, 722k data, 144k init, 0k highmem)
May 31 09:58:28 [kernel] Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 31 09:58:28 [kernel] Calibrating delay using timer specific routine.. 3078.26 BogoMIPS (lpj=6156536)
May 31 09:58:28 [kernel] Mount-cache hash table entries: 512
May 31 09:58:28 [kernel] CPU: After generic identify, caps: 0183fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
May 31 09:58:28 [kernel] CPU: After vendor identify, caps: 0183fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
May 31 09:58:28 [kernel] Enabling disabled K7/SSE Support.
May 31 09:58:28 [kernel] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May 31 09:58:28 [kernel] CPU: L2 Cache: 256K (64 bytes/line)
May 31 09:58:28 [kernel] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
May 31 09:58:28 [kernel] Intel machine check architecture supported.
May 31 09:58:28 [kernel] Intel machine check reporting enabled on CPU#0.
May 31 09:58:28 [kernel] CPU: AMD Athlon(tm) XP 1800+ stepping 02
May 31 09:58:28 [kernel] Checking 'hlt' instruction... OK.
May 31 09:58:28 [kernel] ENABLING IO-APIC IRQs
May 31 09:58:28 [kernel] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
May 31 09:58:28 [kernel] NET: Registered protocol family 16
May 31 09:58:28 [kernel] ACPI: bus type pci registered
May 31 09:58:28 [kernel] PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
May 31 09:58:28 [kernel] PCI: Using configuration type 1
May 31 09:58:28 [kernel] ACPI: Subsystem revision 20060127
May 31 09:58:28 [kernel] ACPI: Interpreter enabled
May 31 09:58:28 [kernel] ACPI: Using IOAPIC for interrupt routing
May 31 09:58:28 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
May 31 09:58:28 [kernel] PCI: Probing PCI hardware (bus 00)
May 31 09:58:28 [kernel] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
May 31 09:58:28 [kernel] PCI quirk: region 4000-407f claimed by vt8235 PM
May 31 09:58:28 [kernel] Boot video device is 0000:01:00.0
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
May 31 09:58:28 [kernel] PCI: Using ACPI for IRQ routing
May 31 09:58:28 [kernel] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
May 31 09:58:28 [kernel] PCI: Bridge: 0000:00:01.0
May 31 09:58:28 [kernel]   IO window: 9000-9fff
May 31 09:58:28 [kernel]   MEM window: e0000000-e1ffffff
May 31 09:58:28 [kernel]   PREFETCH window: d8000000-dfffffff
May 31 09:58:28 [kernel] PCI: Setting latency timer of device 0000:00:01.0 to 64
May 31 09:58:28 [kernel] Machine check exception polling timer started.
May 31 09:58:28 [kernel] squashfs: version 3.0 (2006/03/15) Phillip Lougher
May 31 09:58:28 [kernel] Initializing Cryptographic API
May 31 09:58:28 [kernel] io scheduler noop registered
May 31 09:58:28 [kernel] io scheduler cfq registered (default)
May 31 09:58:28 [kernel]  0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x2000
May 31 09:58:28 [kernel]  0000:00:10.0: Performing full reset
May 31 09:58:28 [kernel]  0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x2000
May 31 09:58:28 [kernel]  0000:00:10.1: Performing full reset
May 31 09:58:28 [kernel]  0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x2000
May 31 09:58:28 [kernel]  0000:00:10.2: Performing full reset
May 31 09:58:28 [kernel] Linux agpgart interface v0.101 (c) Dave Jones
May 31 09:58:28 [kernel] agpgart: Detected VIA KT266/KY266x/KT333 chipset
May 31 09:58:28 [kernel] agpgart: AGP aperture is 128M @ 0xd0000000
May 31 09:58:28 [kernel] [drm] Initialized drm 1.0.1 20051102
May 31 09:58:28 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 31 09:58:28 [kernel] [drm] Initialized radeon 1.22.0 20051229 on minor 0
May 31 09:58:28 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
May 31 09:58:28 [kernel] radeonfb: Found Intel x86 BIOS ROM Image
May 31 09:58:28 [kernel] radeonfb: Retrieved PLL infos from BIOS
May 31 09:58:28 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=180.00 MHz
May 31 09:58:28 [kernel] radeonfb: PLL min 20000 max 35000
May 31 09:58:28 [kernel] radeonfb: Reversed DACs detected
May 31 09:58:28 [kernel] radeonfb: Monitor 1 type CRT found
May 31 09:58:28 [kernel] radeonfb: EDID probed
May 31 09:58:28 [kernel] radeonfb: Monitor 2 type no found
May 31 09:58:28 [kernel] Console: switching to colour frame buffer device 80x30
May 31 09:58:28 [kernel] radeonfb (0000:01:00.0): ATI Radeon QW 
May 31 09:58:28 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
May 31 09:58:28 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
May 31 09:58:28 [kernel] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
May 31 09:58:28 [kernel] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 31 09:58:28 [kernel] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 31 09:58:28 [kernel] mice: PS/2 mouse device common for all mice
May 31 09:58:28 [kernel] input: AT Translated Set 2 keyboard as /class/input/input0
May 31 09:58:28 [kernel] input: PC Speaker as /class/input/input1
May 31 09:58:28 [kernel] FDC 0 is a post-1991 82077
May 31 09:58:28 [kernel] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
May 31 09:58:28 [kernel] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
May 31 09:58:28 [kernel] eth0: VIA Rhine II at 0xe3001000, 00:04:61:42:b8:b1, IRQ 17.
May 31 09:58:28 [kernel] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
May 31 09:58:28 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 31 09:58:28 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 31 09:58:28 [kernel] VP_IDE: IDE controller at PCI slot 0000:00:11.1
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
May 31 09:58:28 [kernel] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
May 31 09:58:28 [kernel] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
May 31 09:58:28 [kernel] PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 2
May 31 09:58:28 [kernel] VP_IDE: chipset revision 6
May 31 09:58:28 [kernel] VP_IDE: not 100% native mode: will probe irqs later
May 31 09:58:28 [kernel] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
May 31 09:58:28 [kernel]     ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio
May 31 09:58:28 [kernel]     ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:pio
May 31 09:58:28 [kernel] Probing IDE interface ide0...
May 31 09:58:28 [kernel] hda: Maxtor 4D080H4, ATA DISK drive
May 31 09:58:28 [kernel] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 31 09:58:28 [kernel] Probing IDE interface ide1...
May 31 09:58:28 [kernel] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
May 31 09:58:28 [kernel] hda: max request size: 128KiB
May 31 09:58:28 [kernel] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
May 31 09:58:28 [kernel] hda: cache flushes not supported
May 31 09:58:28 [kernel]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
May 31 09:58:28 [kernel] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
May 31 09:58:28 [kernel] Uniform CD-ROM driver Revision: 3.20
May 31 09:58:28 [kernel] Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
May 31 09:58:28 [kernel] ALSA device list:
May 31 09:58:28 [kernel]   No soundcards found.
May 31 09:58:28 [kernel] NET: Registered protocol family 2
May 31 09:58:28 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 31 09:58:28 [kernel] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
May 31 09:58:28 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
May 31 09:58:28 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
May 31 09:58:28 [kernel] TCP reno registered
May 31 09:58:28 [kernel] ip_conntrack version 2.4 (6143 buckets, 49144 max) - 172 bytes per conntrack
May 31 09:58:28 [kernel] TCP bic registered
May 31 09:58:28 [kernel] NET: Registered protocol family 1
May 31 09:58:28 [kernel] NET: Registered protocol family 17
May 31 09:58:28 [kernel] Using IPI Shortcut mode
May 31 09:58:28 [kernel] Suspend2 Core.
May 31 09:58:28 [kernel] Suspend2 Compression Driver loading.
May 31 09:58:28 [kernel] Suspend2 Encryption Driver loading.
May 31 09:58:28 [kernel] Suspend2 Swap Writer loading.
May 31 09:58:28 [kernel] Suspend2 FileWriter loading.
May 31 09:58:28 [kernel] ACPI wakeup devices: 
May 31 09:58:28 [kernel] SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 
May 31 09:58:28 [kernel] ACPI: (supports S0 S1 S3 S4 S5)
May 31 09:58:28 [kernel] Suspend2 2.2.5: Swapwriter: Signature found.
May 31 09:58:28 [kernel] Suspend2 2.2.5: Resuming enabled.
May 31 09:58:28 [kernel] EXT3-fs: mounted filesystem with ordered data mode.
May 31 09:58:28 [kernel] VFS: Mounted root (ext3 filesystem) readonly.
May 31 09:58:28 [kernel] Freeing unused kernel memory: 144k freed
May 31 09:58:28 [kernel] kjournald starting.  Commit interval 5 seconds
May 31 09:58:28 [kernel] Adding 530104k swap on /dev/hda7.  Priority:-1 extents:1 across:530104k
May 31 09:58:28 [kernel] EXT3 FS on hda8, internal journal
May 31 09:58:28 [kernel] ACPI: Power Button (FF) [PWRF]
May 31 09:58:28 [kernel] ACPI: Power Button (CM) [PWRB]
May 31 09:58:28 [kernel] ACPI: Sleep Button (CM) [SLPB]
May 31 09:58:28 [kernel] kjournald starting.  Commit interval 5 seconds
May 31 09:58:28 [kernel] EXT3 FS on hda9, internal journal
May 31 09:58:28 [kernel] EXT3-fs: mounted filesystem with ordered data mode.
May 31 09:58:28 [kernel] usbcore: registered new driver usbfs
May 31 09:58:28 [kernel] usbcore: registered new driver hub
May 31 09:58:30 [kernel] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
May 31 09:58:30 [kernel]   http://www.scyld.com/network/ne2k-pci.html
May 31 09:58:30 [kernel] USB Universal Host Controller Interface driver v2.3
May 31 09:58:30 [kernel] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
May 31 09:58:30 [kernel] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
May 31 09:58:30 [kernel] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 4
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: UHCI Host Controller
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: detected 2 ports
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: Performing full reset
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file 'devices'
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '001'
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800
May 31 09:58:30 [kernel] usb usb1: default language 0x0409
May 31 09:58:30 [kernel] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
May 31 09:58:30 [kernel] usb usb1: Product: UHCI Host Controller
May 31 09:58:30 [kernel] usb usb1: Manufacturer: Linux 2.6.16-suspend2-r7 uhci_hcd
May 31 09:58:30 [kernel] usb usb1: SerialNumber: 0000:00:10.0
May 31 09:58:30 [kernel] usb usb1: uevent
May 31 09:58:30 [kernel] usb usb1: device is self-powered
May 31 09:58:30 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 31 09:58:30 [kernel] usb usb1: adding 1-0:1.0 (config #1, interface 0)
May 31 09:58:30 [kernel] usb 1-0:1.0: uevent
May 31 09:58:30 [kernel] hub 1-0:1.0: usb_probe_interface
May 31 09:58:30 [kernel] hub 1-0:1.0: usb_probe_interface - got id
May 31 09:58:30 [kernel] hub 1-0:1.0: USB hub found
May 31 09:58:30 [kernel] hub 1-0:1.0: 2 ports detected
May 31 09:58:30 [kernel] hub 1-0:1.0: standalone hub
May 31 09:58:30 [kernel] hub 1-0:1.0: no power switching (usb 1.0)
May 31 09:58:30 [kernel] hub 1-0:1.0: individual port over-current protection
May 31 09:58:30 [kernel] hub 1-0:1.0: power on to power good time: 2ms
May 31 09:58:30 [kernel] hub 1-0:1.0: local power source is good
May 31 09:58:30 [kernel] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '001'
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: port 1 portsc 01ab,00
May 31 09:58:30 [kernel] hub 1-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s
May 31 09:58:30 [kernel] PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 4
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: UHCI Host Controller
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: detected 2 ports
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: Performing full reset
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '002'
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.1: irq 20, io base 0x0000bc00
May 31 09:58:30 [kernel] usb usb2: default language 0x0409
May 31 09:58:30 [kernel] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
May 31 09:58:30 [kernel] usb usb2: Product: UHCI Host Controller
May 31 09:58:30 [kernel] usb usb2: Manufacturer: Linux 2.6.16-suspend2-r7 uhci_hcd
May 31 09:58:30 [kernel] usb usb2: SerialNumber: 0000:00:10.1
May 31 09:58:30 [kernel] usb usb2: uevent
May 31 09:58:30 [kernel] usb usb2: device is self-powered
May 31 09:58:30 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 31 09:58:30 [kernel] usb usb2: adding 2-0:1.0 (config #1, interface 0)
May 31 09:58:30 [kernel] usb 2-0:1.0: uevent
May 31 09:58:30 [kernel] hub 2-0:1.0: usb_probe_interface
May 31 09:58:30 [kernel] hub 2-0:1.0: usb_probe_interface - got id
May 31 09:58:30 [kernel] hub 2-0:1.0: USB hub found
May 31 09:58:30 [kernel] hub 2-0:1.0: 2 ports detected
May 31 09:58:30 [kernel] hub 2-0:1.0: standalone hub
May 31 09:58:30 [kernel] hub 2-0:1.0: no power switching (usb 1.0)
May 31 09:58:30 [kernel] hub 2-0:1.0: individual port over-current protection
May 31 09:58:30 [kernel] hub 2-0:1.0: power on to power good time: 2ms
May 31 09:58:30 [kernel] hub 2-0:1.0: local power source is good
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '001'
May 31 09:58:30 [kernel] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 4
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: UHCI Host Controller
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: detected 2 ports
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: Performing full reset
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '003'
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c000
May 31 09:58:30 [kernel] usb usb3: default language 0x0409
May 31 09:58:30 [kernel] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
May 31 09:58:30 [kernel] usb usb3: Product: UHCI Host Controller
May 31 09:58:30 [kernel] usb usb3: Manufacturer: Linux 2.6.16-suspend2-r7 uhci_hcd
May 31 09:58:30 [kernel] usb usb3: SerialNumber: 0000:00:10.2
May 31 09:58:30 [kernel] usb usb3: uevent
May 31 09:58:30 [kernel] usb usb3: device is self-powered
May 31 09:58:30 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 31 09:58:30 [kernel] usb usb3: adding 3-0:1.0 (config #1, interface 0)
May 31 09:58:30 [kernel] usb 3-0:1.0: uevent
May 31 09:58:30 [kernel] hub 3-0:1.0: usb_probe_interface
May 31 09:58:30 [kernel] hub 3-0:1.0: usb_probe_interface - got id
May 31 09:58:30 [kernel] hub 3-0:1.0: USB hub found
May 31 09:58:30 [kernel] hub 3-0:1.0: 2 ports detected
May 31 09:58:30 [kernel] hub 3-0:1.0: standalone hub
May 31 09:58:30 [kernel] hub 3-0:1.0: no power switching (usb 1.0)
May 31 09:58:30 [kernel] hub 3-0:1.0: individual port over-current protection
May 31 09:58:30 [kernel] hub 3-0:1.0: power on to power good time: 2ms
May 31 09:58:30 [kernel] hub 3-0:1.0: local power source is good
May 31 09:58:30 [kernel] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '001'
May 31 09:58:30 [kernel] usb 1-1: new low speed USB device using uhci_hcd and address 2
May 31 09:58:30 [kernel] usb 1-1: skipped 1 descriptor after interface
May 31 09:58:30 [kernel] usb 1-1: default language 0x0409
May 31 09:58:30 [kernel] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:30 [kernel] usb 1-1: Product: USB-PS/2 Optical Mouse
May 31 09:58:30 [kernel] usb 1-1: Manufacturer: Logitech
May 31 09:58:30 [kernel] usb 1-1: uevent
May 31 09:58:30 [kernel] usb 1-1: device is bus-powered
May 31 09:58:30 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 31 09:58:30 [kernel] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
May 31 09:58:30 [kernel] usb 1-1:1.0: uevent
May 31 09:58:30 [kernel] drivers/usb/core/inode.c: creating file '002'
May 31 09:58:30 [kernel] uhci_hcd 0000:00:10.0: port 2 portsc 009b,00
May 31 09:58:30 [kernel] hub 1-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
May 31 09:58:30 [kernel] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
May 31 09:58:30 [kernel] usb 1-2: new full speed USB device using uhci_hcd and address 3
May 31 09:58:31 [kernel] usb 1-2: ep0 maxpacket = 8
May 31 09:58:31 [kernel] usb 1-2: default language 0x0409
May 31 09:58:31 [kernel] usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:31 [kernel] usb 1-2: Product: Camera
May 31 09:58:31 [kernel] usb 1-2: Manufacturer:         
May 31 09:58:31 [kernel] usb 1-2: uevent
May 31 09:58:31 [kernel] usb 1-2: device is bus-powered
May 31 09:58:31 [kernel] usb 1-2: configuration #1 chosen from 1 choice
May 31 09:58:31 [kernel] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
May 31 09:58:31 [kernel] usb 1-2:1.0: uevent
May 31 09:58:31 [kernel] drivers/usb/core/inode.c: creating file '003'
May 31 09:58:31 [kernel] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
May 31 09:58:31 [kernel] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
May 31 09:58:31 [kernel] uhci_hcd 0000:00:10.1: port 1 portsc 009b,00
May 31 09:58:31 [kernel] hub 2-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
May 31 09:58:31 [kernel] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
May 31 09:58:31 [kernel] usb 2-1: new full speed USB device using uhci_hcd and address 2
May 31 09:58:31 [kernel] usb 2-1: ep0 maxpacket = 8
May 31 09:58:31 [kernel] usb 2-1: default language 0x0409
May 31 09:58:31 [kernel] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:31 [kernel] usb 2-1: Product: Generic USB Hub
May 31 09:58:31 [kernel] usb 2-1: Manufacturer: ALCOR
May 31 09:58:31 [kernel] usb 2-1: uevent
May 31 09:58:31 [kernel] usb 2-1: device is self-powered
May 31 09:58:31 [kernel] usb 2-1: configuration #1 chosen from 1 choice
May 31 09:58:31 [kernel] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
May 31 09:58:31 [kernel] usb 2-1:1.0: uevent
May 31 09:58:31 [kernel] hub 2-1:1.0: usb_probe_interface
May 31 09:58:31 [kernel] hub 2-1:1.0: usb_probe_interface - got id
May 31 09:58:31 [kernel] hub 2-1:1.0: USB hub found
May 31 09:58:31 [kernel] hub 2-1:1.0: 4 ports detected
May 31 09:58:31 [kernel] hub 2-1:1.0: standalone hub
May 31 09:58:31 [kernel] hub 2-1:1.0: individual port power switching
May 31 09:58:31 [kernel] hub 2-1:1.0: individual port over-current protection
May 31 09:58:31 [kernel] hub 2-1:1.0: power on to power good time: 44ms
May 31 09:58:31 [kernel] hub 2-1:1.0: local power source is good
May 31 09:58:31 [kernel] hub 2-1:1.0: enabling power on all ports
May 31 09:58:31 [kernel] drivers/usb/core/inode.c: creating file '002'
May 31 09:58:31 [kernel] uhci_hcd 0000:00:10.1: port 2 portsc 018a,00
May 31 09:58:31 [kernel] hub 2-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s
May 31 09:58:31 [kernel] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300
May 31 09:58:31 [kernel] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006
May 31 09:58:31 [kernel] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
May 31 09:58:31 [kernel] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
May 31 09:58:31 [kernel] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
May 31 09:58:31 [kernel] uhci_hcd 0000:00:10.2: port 2 portsc 018a,00
May 31 09:58:31 [kernel] hub 3-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s
May 31 09:58:32 [kernel] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300
May 31 09:58:32 [kernel] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
May 31 09:58:32 [kernel] hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0000
May 31 09:58:33 [kernel] uhci_hcd 0000:00:10.2: suspend_rh (auto-stop)
May 31 09:58:35 [kernel] usbhid 1-1:1.0: usb_probe_interface
May 31 09:58:35 [kernel] usbhid 1-1:1.0: usb_probe_interface - got id
May 31 09:58:35 [kernel] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
May 31 09:58:35 [kernel] usbcore: registered new driver usbhid
May 31 09:58:35 [kernel] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May 31 09:58:37 [kernel] ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
May 31 09:58:37 [kernel] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: EHCI Host Controller
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: reset hcs_params 0x3206 dbg=0 cc=3 pcc=2 ordered !ppc ports=6
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: reset hcc_params 6872 thresh 7 uframes 256/512/1024
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: MWI active
May 31 09:58:37 [kernel] drivers/usb/core/inode.c: creating file '004'
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: irq 20, io mem 0xe3000000
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: init command 010009 (park)=0 ithresh=1 period=256 RUN
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 31 09:58:37 [kernel] usb usb4: default language 0x0409
May 31 09:58:37 [kernel] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
May 31 09:58:37 [kernel] usb usb4: Product: EHCI Host Controller
May 31 09:58:37 [kernel] usb usb4: Manufacturer: Linux 2.6.16-suspend2-r7 ehci_hcd
May 31 09:58:37 [kernel] usb usb4: SerialNumber: 0000:00:10.3
May 31 09:58:37 [kernel] usb usb4: uevent
May 31 09:58:37 [kernel] usb usb4: device is self-powered
May 31 09:58:37 [kernel] usb usb4: configuration #1 chosen from 1 choice
May 31 09:58:37 [kernel] usb usb4: adding 4-0:1.0 (config #1, interface 0)
May 31 09:58:37 [kernel] usb 4-0:1.0: uevent
May 31 09:58:37 [kernel] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006
May 31 09:58:37 [kernel] uhci_hcd 0000:00:10.0: port 1 portsc 01aa,00
May 31 09:58:37 [kernel] hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
May 31 09:58:37 [kernel] usb 1-1: USB disconnect, address 2
May 31 09:58:37 [kernel] usb 1-1: usb_disable_device nuking all URBs
May 31 09:58:37 [kernel] usb 1-1: unregistering interface 1-1:1.0
May 31 09:58:37 [kernel] usb 1-1:1.0: uevent
May 31 09:58:37 [kernel] usb 1-1: unregistering device
May 31 09:58:37 [kernel] usb 1-1: uevent
May 31 09:58:37 [kernel] hub 4-0:1.0: usb_probe_interface
May 31 09:58:37 [kernel] hub 4-0:1.0: usb_probe_interface - got id
May 31 09:58:37 [kernel] hub 4-0:1.0: USB hub found
May 31 09:58:37 [kernel] hub 4-0:1.0: 6 ports detected
May 31 09:58:37 [kernel] hub 4-0:1.0: standalone hub
May 31 09:58:37 [kernel] hub 4-0:1.0: no power switching (usb 1.0)
May 31 09:58:37 [kernel] hub 4-0:1.0: individual port over-current protection
May 31 09:58:37 [kernel] hub 4-0:1.0: Single TT
May 31 09:58:37 [kernel] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
May 31 09:58:37 [kernel] hub 4-0:1.0: power on to power good time: 20ms
May 31 09:58:37 [kernel] drivers/usb/core/inode.c: creating file '001'
May 31 09:58:37 [kernel] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
May 31 09:58:37 [kernel] uhci_hcd 0000:00:10.0: port 2 portsc 009a,00
May 31 09:58:37 [kernel] hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
May 31 09:58:37 [kernel] usb 1-2: USB disconnect, address 3
May 31 09:58:37 [kernel] usb 1-2: usb_disable_device nuking all URBs
May 31 09:58:37 [kernel] usb 1-2: unregistering interface 1-2:1.0
May 31 09:58:37 [kernel] usb 1-2:1.0: uevent
May 31 09:58:37 [kernel] usb 1-2: unregistering device
May 31 09:58:37 [kernel] usb 1-2: uevent
May 31 09:58:37 [kernel] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
May 31 09:58:37 [kernel] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
May 31 09:58:37 [kernel] uhci_hcd 0000:00:10.1: port 1 portsc 009a,00
May 31 09:58:37 [kernel] hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
May 31 09:58:37 [kernel] usb 2-1: USB disconnect, address 2
May 31 09:58:37 [kernel] usb 2-1: usb_disable_device nuking all URBs
May 31 09:58:37 [kernel] uhci_hcd 0000:00:10.1: shutdown urb ee860d40 pipe 40408280 ep1in-intr
May 31 09:58:37 [kernel] usb 2-1: unregistering interface 2-1:1.0
May 31 09:58:37 [kernel] usb 2-1:1.0: uevent
May 31 09:58:37 [kernel] usb 2-1: unregistering device
May 31 09:58:37 [kernel] usb 2-1: uevent
May 31 09:58:37 [kernel] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
May 31 09:58:37 [kernel] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 000e
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
May 31 09:58:37 [kernel] hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
May 31 09:58:37 [kernel] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: port 1 low speed --> companion
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 1 status 003402 POWER OWNER sig=k CSC
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
May 31 09:58:37 [kernel] hub 4-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
May 31 09:58:37 [kernel] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: port 2 full speed --> companion
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
May 31 09:58:37 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
May 31 09:58:37 [kernel] hub 4-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
May 31 09:58:38 [kernel] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
May 31 09:58:38 [kernel] ehci_hcd 0000:00:10.3: port 3 full speed --> companion
May 31 09:58:38 [kernel] ehci_hcd 0000:00:10.3: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
May 31 09:58:38 [kernel] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
May 31 09:58:38 [kernel] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006
May 31 09:58:38 [kernel] uhci_hcd 0000:00:10.0: port 1 portsc 01a3,00
May 31 09:58:38 [kernel] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
May 31 09:58:38 [kernel] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
May 31 09:58:38 [kernel] usb 1-1: new low speed USB device using uhci_hcd and address 4
May 31 09:58:38 [kernel] usb 1-1: skipped 1 descriptor after interface
May 31 09:58:38 [kernel] usb 1-1: default language 0x0409
May 31 09:58:38 [kernel] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:38 [kernel] usb 1-1: Product: USB-PS/2 Optical Mouse
May 31 09:58:38 [kernel] usb 1-1: Manufacturer: Logitech
May 31 09:58:38 [kernel] usb 1-1: uevent
May 31 09:58:38 [kernel] usb 1-1: device is bus-powered
May 31 09:58:38 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 31 09:58:38 [kernel] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
May 31 09:58:38 [kernel] usb 1-1:1.0: uevent
May 31 09:58:38 [kernel] usbhid 1-1:1.0: usb_probe_interface
May 31 09:58:38 [kernel] usbhid 1-1:1.0: usb_probe_interface - got id
May 31 09:58:38 [kernel] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
May 31 09:58:38 [kernel] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
May 31 09:58:38 [kernel] drivers/usb/core/inode.c: creating file '004'
May 31 09:58:38 [kernel] uhci_hcd 0000:00:10.0: port 2 portsc 0093,00
May 31 09:58:38 [kernel] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
May 31 09:58:38 [kernel] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
May 31 09:58:38 [kernel] usb 1-2: new full speed USB device using uhci_hcd and address 5
May 31 09:58:38 [kernel] usb 1-2: ep0 maxpacket = 8
May 31 09:58:38 [kernel] usb 1-2: default language 0x0409
May 31 09:58:38 [kernel] usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:38 [kernel] usb 1-2: Product: Camera
May 31 09:58:38 [kernel] usb 1-2: Manufacturer:         
May 31 09:58:38 [kernel] usb 1-2: uevent
May 31 09:58:38 [kernel] usb 1-2: device is bus-powered
May 31 09:58:38 [kernel] usb 1-2: configuration #1 chosen from 1 choice
May 31 09:58:38 [kernel] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
May 31 09:58:38 [kernel] usb 1-2:1.0: uevent
May 31 09:58:38 [kernel] drivers/usb/core/inode.c: creating file '005'
May 31 09:58:38 [kernel] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
May 31 09:58:38 [kernel] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
May 31 09:58:38 [kernel] uhci_hcd 0000:00:10.1: port 1 portsc 0093,00
May 31 09:58:38 [kernel] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
May 31 09:58:39 [kernel] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
May 31 09:58:39 [kernel] usb 2-1: new full speed USB device using uhci_hcd and address 3
May 31 09:58:39 [kernel] usb 2-1: ep0 maxpacket = 8
May 31 09:58:39 [kernel] usb 2-1: default language 0x0409
May 31 09:58:39 [kernel] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
May 31 09:58:39 [kernel] usb 2-1: Product: Generic USB Hub
May 31 09:58:39 [kernel] usb 2-1: Manufacturer: ALCOR
May 31 09:58:39 [kernel] usb 2-1: uevent
May 31 09:58:39 [kernel] usb 2-1: device is self-powered
May 31 09:58:39 [kernel] usb 2-1: configuration #1 chosen from 1 choice
May 31 09:58:39 [kernel] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
May 31 09:58:39 [kernel] usb 2-1:1.0: uevent
May 31 09:58:39 [kernel] hub 2-1:1.0: usb_probe_interface
May 31 09:58:39 [kernel] hub 2-1:1.0: usb_probe_interface - got id
May 31 09:58:39 [kernel] hub 2-1:1.0: USB hub found
May 31 09:58:39 [kernel] hub 2-1:1.0: 4 ports detected
May 31 09:58:39 [kernel] hub 2-1:1.0: standalone hub
May 31 09:58:39 [kernel] hub 2-1:1.0: individual port power switching
May 31 09:58:39 [kernel] hub 2-1:1.0: individual port over-current protection
May 31 09:58:39 [kernel] hub 2-1:1.0: power on to power good time: 44ms
May 31 09:58:39 [kernel] hub 2-1:1.0: local power source is good
May 31 09:58:39 [kernel] hub 2-1:1.0: enabling power on all ports
May 31 09:58:39 [kernel] drivers/usb/core/inode.c: creating file '003'
May 31 09:58:39 [kernel] hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0000
May 31 09:58:40 [kernel] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
May 31 09:58:40 [kernel] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
May 31 09:58:40 [kernel] PCI: Setting latency timer of device 0000:00:11.5 to 64
May 31 09:58:57 [kernel] eth0: link down
                - Last output repeated twice -
May 31 09:58:59 [kernel] parport0: PC-style at 0x378 [PCSPP(,...)]
May 31 09:58:59 [kernel] lp0: using parport0 (polling).
May 31 08:59:17 [kernel] mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
                - Last output repeated 2 times -
May 31 08:59:17 [kernel] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
May 31 08:59:17 [kernel] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
May 31 08:59:17 [kernel] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
May 31 09:07:19 [kernel] Modules linked in: vfat fat w83627hf hwmon_vid eeprom i2c_isa parport_pc lp parport snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_via82xx snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device i2c_viapro ehci_hcd usbhid uhci_hcd ne2k_pci 8390 usbcore button
May 31 09:07:19 [kernel] EIP:    0060:[<d287df55>]    Not tainted VLI
May 31 09:07:19 [kernel] EFLAGS: 00010282   (2.6.16-suspend2-r7 #1) 
May 31 09:09:07 [kernel] Modules linked in: vfat fat w83627hf hwmon_vid eeprom i2c_isa parport_pc lp parport snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_via82xx snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device i2c_viapro ehci_hcd usbhid uhci_hcd ne2k_pci 8390 usbcore button
May 31 09:09:07 [kernel] EIP:    0060:[<c7a25fe6>]    Not tainted VLI
May 31 09:09:07 [kernel] EFLAGS: 00010a17   (2.6.16-suspend2-r7 #1)