* Package: dev-perl/POE-1.368.0:0 * Repository: gentoo * Maintainer: perl@gentoo.org * USE: abi_x86_64 amd64 elibc_glibc ipv6 kernel_linux ncurses test * FEATURES: network-sandbox preserve-libs sandbox test userpriv usersandbox >>> Unpacking source... >>> Unpacking POE-1.368.tar.gz to /var/tmp/portage/dev-perl/POE-1.368.0/work >>> Source unpacked in /var/tmp/portage/dev-perl/POE-1.368.0/work >>> Preparing source in /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368 ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368 ... * Using ExtUtils::MakeMaker * perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/dev-perl/POE-1.368.0/image ============================================= STDIN is not a terminal. Assuming --default. ============================================= Some of POE's tests require a functional network. You can skip these tests if you'd like. Would you like to skip the network tests? [n] n Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for POE Writing MYMETA.yml and MYMETA.json >>> Source configured. >>> Compiling source in /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368 ... make -j5 'OTHERLDFLAGS=-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0' "/usr/bin/perl" mylib/gen-tests.perl lib/POE.pm cp lib/POE/Resource.pm blib/lib/POE/Resource.pm cp lib/POE/Filter/Stream.pm blib/lib/POE/Filter/Stream.pm cp lib/POE/NFA.pm blib/lib/POE/NFA.pm cp lib/POE/Resource/FileHandles.pm blib/lib/POE/Resource/FileHandles.pm cp lib/POE/Loop/Select.pm blib/lib/POE/Loop/Select.pm cp lib/POE/Filter/Line.pm blib/lib/POE/Filter/Line.pm cp lib/POE/Pipe/OneWay.pm blib/lib/POE/Pipe/OneWay.pm cp lib/POE/Wheel/Curses.pm blib/lib/POE/Wheel/Curses.pm cp lib/POE.pm blib/lib/POE.pm cp lib/POE/Resources.pm blib/lib/POE/Resources.pm cp lib/POE/Filter/Block.pm blib/lib/POE/Filter/Block.pm cp lib/POE/Pipe.pm blib/lib/POE/Pipe.pm cp lib/POE/Resource/Events.pm blib/lib/POE/Resource/Events.pm cp lib/POE/Queue/Array.pm blib/lib/POE/Queue/Array.pm cp lib/POE/Session.pm blib/lib/POE/Session.pm cp lib/POE/Driver/SysRW.pm blib/lib/POE/Driver/SysRW.pm cp lib/POE/Wheel/ReadLine.pm blib/lib/POE/Wheel/ReadLine.pm cp lib/POE/Resource/Sessions.pm blib/lib/POE/Resource/Sessions.pm cp lib/POE/Queue.pm blib/lib/POE/Queue.pm cp lib/POE/Driver.pm blib/lib/POE/Driver.pm cp lib/POE/Loop.pm blib/lib/POE/Loop.pm cp lib/POE/Filter/HTTPD.pm blib/lib/POE/Filter/HTTPD.pm cp lib/POE/Resource/Signals.pm blib/lib/POE/Resource/Signals.pm cp lib/POE/Loop/PerlSignals.pm blib/lib/POE/Loop/PerlSignals.pm cp lib/POE/Wheel/FollowTail.pm blib/lib/POE/Wheel/FollowTail.pm cp lib/POE/Filter/RecordBlock.pm blib/lib/POE/Filter/RecordBlock.pm cp lib/POE/Kernel.pm blib/lib/POE/Kernel.pm cp lib/POE/Filter.pm blib/lib/POE/Filter.pm cp lib/POE/Pipe/TwoWay.pm blib/lib/POE/Pipe/TwoWay.pm cp lib/POE/Wheel.pm blib/lib/POE/Wheel.pm cp lib/POE/Resource/SIDs.pm blib/lib/POE/Resource/SIDs.pm cp lib/POE/Component/Client/TCP.pm blib/lib/POE/Component/Client/TCP.pm cp lib/POE/Resource/Extrefs.pm blib/lib/POE/Resource/Extrefs.pm cp lib/POE/Filter/Map.pm blib/lib/POE/Filter/Map.pm cp lib/POE/Wheel/ReadWrite.pm blib/lib/POE/Wheel/ReadWrite.pm cp lib/POE/Filter/Grep.pm blib/lib/POE/Filter/Grep.pm cp lib/POE/Resource/Aliases.pm blib/lib/POE/Resource/Aliases.pm cp lib/POE/Filter/Reference.pm blib/lib/POE/Filter/Reference.pm cp lib/POE/Loop/IO_Poll.pm blib/lib/POE/Loop/IO_Poll.pm cp lib/POE/Filter/Stackable.pm blib/lib/POE/Filter/Stackable.pm cp lib/POE/Test/Sequence.pm blib/lib/POE/Test/Sequence.pm cp lib/POE/Resource/Clock.pm blib/lib/POE/Resource/Clock.pm cp lib/POE/Wheel/ListenAccept.pm blib/lib/POE/Wheel/ListenAccept.pm cp lib/POE/Component/Server/TCP.pm blib/lib/POE/Component/Server/TCP.pm cp lib/POE/Component.pm blib/lib/POE/Component.pm cp lib/POE/Wheel/Run.pm blib/lib/POE/Wheel/Run.pm cp lib/POE/Wheel/SocketFactory.pm blib/lib/POE/Wheel/SocketFactory.pm >>> Source compiled. >>> Test phase: dev-perl/POE-1.368.0 * Removing un-needed t/10_units/01_pod/01_pod.t * Removing un-needed t/10_units/01_pod/02_pod_coverage.t * Removing un-needed t/10_units/01_pod/03_pod_no404s.t * Removing un-needed t/10_units/01_pod/04_pod_linkcheck.t * Fixing Manifest * Test::Harness Jobs=5 make -j5 test TEST_VERBOSE=0 "/usr/bin/perl" mylib/gen-tests.perl lib/POE.pm PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/*/*/*.t t/10_units/02_pipes/01_base.t ...................... skipped: not implemented yet t/10_units/02_pipes/02_oneway.t .................... ok ===( 4;0 1/1 0/? 0/? 0/? 0/? )===============================# Testing POE 1.368, POE::Test::Loops 1.360, Perl 5.036001, /usr/bin/perl on linux # pogomips: 80802358 t/00_info.t ........................................ ok t/10_units/03_base/03_component.t .................. ok t/10_units/03_base/04_driver.t ..................... ok t/10_units/02_pipes/03_twoway.t .................... ok t/10_units/03_base/01_poe.t ........................ ok t/10_units/03_base/05_filter.t ..................... ok t/10_units/03_base/06_loop.t ....................... ok t/10_units/03_base/08_resource.t ................... ok t/10_units/03_base/09_resources.t .................. ok t/10_units/03_base/07_queue.t ...................... ok t/10_units/03_base/10_wheel.t ...................... ok t/10_units/03_base/12_assert_retval.t .............. ok t/10_units/03_base/13_assert_data.t ................ ok t/10_units/03_base/14_kernel.t ..................... ok t/10_units/03_base/11_assert_usage.t ............... ok t/10_units/03_base/15_kernel_internal.t ............ ok t/10_units/04_drivers/01_sysrw.t ................... ok t/10_units/03_base/16_nfa_usage.t .................. ok t/10_units/05_filters/01_block.t ................... ok t/10_units/03_base/17_detach_start.t ............... ok t/10_units/05_filters/02_grep.t .................... ok t/10_units/05_filters/03_http.t .................... skipped: Need network access (and permission) for these tests t/10_units/05_filters/04_line.t .................... ok t/10_units/05_filters/05_map.t ..................... ok t/10_units/05_filters/06_recordblock.t ............. ok t/10_units/05_filters/08_stream.t .................. ok t/10_units/05_filters/50_stackable.t ............... ok t/10_units/05_filters/07_reference.t ............... ok t/10_units/05_filters/51_reference_die.t ........... skipped: YAML module not available t/10_units/05_filters/99_filterchange.t ............ ok t/10_units/07_exceptions/02_turn_off.t ............. ok t/10_units/07_exceptions/03_not_handled.t .......... ok t/10_units/08_loops/02_explicit_loop_fail.t ........ ok t/10_units/06_queues/01_array.t .................... ok t/10_units/08_loops/01_explicit_loop.t ............. ok t/10_units/08_loops/03_explicit_loop_poll.t ........ ok t/10_units/08_loops/04_explicit_loop_envvar.t ...... ok t/10_units/08_loops/05_kernel_loop.t ............... ok t/10_units/08_loops/06_kernel_loop_poll.t .......... ok t/10_units/08_loops/07_kernel_loop_fail.t .......... ok t/10_units/08_loops/08_kernel_loop_search_poll.t ... ok t/10_units/08_loops/09_naive_loop_load.t ........... ok t/10_units/08_loops/10_naive_loop_load_poll.t ...... ok t/10_units/08_loops/11_double_loop.t ............... ok t/20_resources/10_perl/aliases.t ................... ok t/20_resources/10_perl/caller_state.t .............. ok t/20_resources/10_perl/events.t .................... ok t/20_resources/10_perl/extrefs.t ................... ok t/20_resources/10_perl/extrefs_gc.t ................ ok t/20_resources/10_perl/filehandles.t ............... skipped: Network access (and permission) required to run this test t/20_resources/10_perl/sessions.t .................. ok t/20_resources/10_perl/sids.t ...................... ok t/20_resources/10_perl/signals.t ................... ok t/30_loops/io_poll/all_errors.t .................... skipped: most of these should move into other test files t/30_loops/io_poll/comp_tcp.t ...................... skipped: Network access (and permission) required to run this test ===( 2822;2 4/7 1/2 0/? 0/? )====================================# Testing POE 1.368, POE::Test::Loops 1.360, Using Loop(POE::Loop::IO_Poll), Perl 5.036001, /usr/bin/perl on linux t/30_loops/io_poll/00_info.t ....................... ok t/30_loops/io_poll/comp_tcp_concurrent.t ........... skipped: Network access (and permission) required to run this test t/30_loops/io_poll/connect_errors.t ................ skipped: Network access (and permission) required to run this test t/10_units/07_exceptions/01_normal.t ............... ok t/30_loops/io_poll/k_aliases.t ..................... ok t/30_loops/io_poll/k_run_returns.t ................. ok t/30_loops/io_poll/k_alarms.t ...................... ok t/30_loops/io_poll/k_detach.t ...................... ok t/30_loops/io_poll/k_signals_rerun.t ............... ok t/30_loops/io_poll/ses_nfa.t ....................... ok ===( 2950;3 5/17 2/15 2/8 0/1 )================================# This test generates some STDERR during trace testing. t/30_loops/io_poll/k_sig_child.t ................... ok t/30_loops/io_poll/sbk_signal_init.t ............... ok t/30_loops/io_poll/k_signals.t ..................... ok t/30_loops/io_poll/wheel_accept.t .................. skipped: Network access (and permission) required to run this test t/30_loops/io_poll/wheel_curses.t .................. skipped: Need help with Curses functions blocking under ptys t/30_loops/io_poll/wheel_readline.t ................ skipped: not running in a terminal ===( 2997;4 5/17 9/41 17/28 1/103 0/? )=====================setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted t/30_loops/io_poll/wheel_run_size.t ................ skipped: This test requires Term::Size ===( 3000;4 5/17 9/41 17/28 4/103 )==========================setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted t/30_loops/io_poll/wheel_run.t ..................... ok t/30_loops/io_poll/wheel_sf_ipv6.t ................. skipped: Socket::GetAddrInfo is needed for IPv6 tests t/30_loops/io_poll/wheel_sf_tcp.t .................. skipped: Network access (and permission) required to run this test t/30_loops/io_poll/wheel_sf_udp.t .................. skipped: Network access (and permission) required to run this test t/30_loops/io_poll/wheel_sf_unix.t ................. skipped: Network access (and permission) required to run this test t/30_loops/io_poll/k_selects.t ..................... ok ===( 3120;4 9/41 17/28 7/10 2/7 )==============================setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted t/30_loops/io_poll/z_kogman_sig_order.t ............ ok t/30_loops/io_poll/wheel_readwrite.t ............... ok ===( 3137;4 9/41 7/10 1/14 0/? )==============================# Using '/bin/true' as our thing to run under system() t/30_loops/io_poll/z_merijn_sigchld_system.t ....... ok ===( 3142;4 9/41 7/10 1/14 1/6 0/? )=========================# Parent 222 waiting 3sec for slow systems to settle. t/30_loops/io_poll/wheel_tail.t .................... ok t/30_loops/io_poll/z_rt53302_fh_watchers.t ......... skipped: Network access (and permission) required to run this test t/30_loops/io_poll/z_leolo_wheel_run.t ............. ok t/30_loops/io_poll/z_steinert_signal_integrity.t ... ok ===( 3165;6 9/41 4/6 0/4 1/6 1/2 )=============================# Testing POE 1.368, POE::Test::Loops 1.360, Using Loop(POE::Loop::Select), Perl 5.036001, /usr/bin/perl on linux t/30_loops/select/00_info.t ........................ ok t/30_loops/select/all_errors.t ..................... skipped: most of these should move into other test files t/30_loops/select/comp_tcp.t ....................... skipped: Network access (and permission) required to run this test t/30_loops/select/comp_tcp_concurrent.t ............ skipped: Network access (and permission) required to run this test t/30_loops/select/connect_errors.t ................. skipped: Network access (and permission) required to run this test t/30_loops/select/k_alarms.t ....................... ok t/30_loops/select/k_aliases.t ...................... ok ===( 3226;7 10/41 4/6 0/4 3/6 0/9 )================================ 185 === 23 -> _start (from /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368/blib/lib/POE/Kernel.pm at 1498) === 185 === 23 -> woot (from /usr/lib64/perl5/vendor_perl/5.36/POE/Test/Loops/ses_session.pm at 691) t/30_loops/select/k_detach.t ....................... ok t/30_loops/select/k_run_returns.t .................. ok ===( 3267;7 38/41 4/6 0/4 5/6 1/17 )===========================# sending sigusr1 # sent sigusr1 t/30_loops/io_poll/z_rt39872_sigchld_stop.t ........ ok ===( 3276;7 38/41 4/6 5/6 5/17 1/15 )============================ 185 === 23 -> narf (from /usr/lib64/perl5/vendor_perl/5.36/POE/Test/Loops/ses_session.pm at 692) ===( 3278;8 39/41 4/6 5/6 5/17 2/15 )============================ 185 === 23 -> _stop (from /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368/blib/lib/POE/Resource/Sessions.pm at 571) t/30_loops/io_poll/ses_session.t ................... ok t/30_loops/io_poll/z_rt54319_bazerka_followtail.t .. ok t/30_loops/select/k_signals_rerun.t ................ ok t/30_loops/select/k_sig_child.t .................... ok t/30_loops/select/ses_nfa.t ........................ ok ===( 3348;9 4/6 5/17 6/8 0/1 )==================================# This test generates some STDERR during trace testing. t/30_loops/select/k_selects.t ...................... ok t/30_loops/select/wheel_accept.t ................... skipped: Network access (and permission) required to run this test t/30_loops/select/sbk_signal_init.t ................ ok t/30_loops/select/wheel_curses.t ................... skipped: Need help with Curses functions blocking under ptys t/30_loops/select/wheel_readline.t ................. skipped: not running in a terminal ===( 3388;9 4/6 6/8 9/41 17/28 1/103 )=======================setsid() failed, strange behavior may result: Operation not permitted t/30_loops/select/k_signals.t ...................... ok ===( 3393;9 4/6 9/41 17/28 4/103 )============================setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted t/30_loops/select/wheel_run.t ...................... ok t/30_loops/select/wheel_run_size.t ................. skipped: This test requires Term::Size t/30_loops/select/wheel_sf_ipv6.t .................. skipped: Socket::GetAddrInfo is needed for IPv6 tests t/30_loops/select/wheel_sf_tcp.t ................... skipped: Network access (and permission) required to run this test t/30_loops/select/wheel_sf_udp.t ................... skipped: Network access (and permission) required to run this test ===( 3492;10 4/6 9/41 17/28 0/? )===============================test case didn't end sanely at /usr/lib64/perl5/vendor_perl/5.36/POE/Test/Loops/z_rt39872_sigchld.pm line 117. Compilation failed in require at t/30_loops/io_poll/z_rt39872_sigchld.t line 26. # Looks like your test exited with 4 just after 4. t/30_loops/io_poll/z_rt39872_sigchld.t ............. Dubious, test returned 4 (wstat 1024, 0x400) Failed 2/6 subtests t/30_loops/select/wheel_sf_unix.t .................. skipped: Network access (and permission) required to run this test ===( 3494;10 9/41 17/28 1/10 1/7 0/? )========================setsid() failed, strange behavior may result: Operation not permitted setsid() failed, strange behavior may result: Operation not permitted t/30_loops/select/wheel_readwrite.t ................ ok t/30_loops/select/z_kogman_sig_order.t ............. ok ===( 3517;10 9/41 6/10 1/14 0/? )=============================# Using '/bin/true' as our thing to run under system() t/30_loops/select/z_merijn_sigchld_system.t ........ ok ===( 3522;10 9/41 6/10 1/14 1/6 0/? )========================# Parent 306 waiting 3sec for slow systems to settle. t/30_loops/select/z_rt39872_sigchld.t .............. ok t/30_loops/select/z_rt53302_fh_watchers.t .......... skipped: Network access (and permission) required to run this test t/30_loops/select/wheel_tail.t ..................... ok t/30_loops/select/z_leolo_wheel_run.t .............. ok t/90_regression/agaran-filter-httpd.t .............. ok t/90_regression/averell-callback-ret.t ............. ok t/90_regression/bingos-followtail.t ................ ok t/90_regression/broeren-win32-nbio.t ............... skipped: This test examines ActiveState Perl behavior. t/30_loops/select/z_steinert_signal_integrity.t .... ok t/90_regression/cfedde-filter-httpd.t .............. skipped: - Network access (and permission) required to run this test t/90_regression/ferrari-server-unix.t .............. skipped: Network access (and permission) required to run this test t/90_regression/grinnz-die-in-die.t ................ ok ===( 3557;11 9/41 0/4 1/6 0/? )=================================Died at t/90_regression/hinrik-wheel-run-die.t line 21. t/90_regression/hinrik-wheel-run-die.t ............. ok ===( 3558;11 9/41 0/4 1/6 0/? )=================================# This test can take up to 10 seconds ===( 3559;12 9/41 0/4 1/6 1/11 0/? )==========================# This test can take up to 10 seconds t/90_regression/kjeldahl-stop-start-sig-nopipe.t ... ok ===( 3572;12 9/41 0/4 2/6 2/11 )===============================# This test can take up to 10 seconds t/90_regression/kjeldahl-stop-start-polling.t ...... ok ===( 3593;13 15/41 2/4 4/6 2/11 )===============================# sending sigusr1 # sent sigusr1 t/30_loops/select/z_rt39872_sigchld_stop.t ......... ok t/90_regression/kjeldahl-stop-start-sig-pipe.t ..... ok ===( 3610;13 21/41 4/6 0/? 0/? )==================================== 269 === 23 -> _start (from /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368/blib/lib/POE/Kernel.pm at 1498) === 269 === 23 -> woot (from /usr/lib64/perl5/vendor_perl/5.36/POE/Test/Loops/ses_session.pm at 691) === 269 === 23 -> narf (from /usr/lib64/perl5/vendor_perl/5.36/POE/Test/Loops/ses_session.pm at 692) t/30_loops/select/z_rt54319_bazerka_followtail.t ... ok t/90_regression/meh-startstop-return.t ............. ok ===( 3637;14 41/41 3/11 1/8 0/? )================================== 269 === 23 -> _stop (from /var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368/blib/lib/POE/Resource/Sessions.pm at 571) t/30_loops/select/ses_session.t .................... ok t/90_regression/neyuki_detach.t .................... ok t/90_regression/leolo-sig-die.t .................... ok t/90_regression/rt14444-arg1.t ..................... ok t/90_regression/prumike-win32-stat.t ............... skipped: This test examines Strawberry/ActiveState Perl behavior. t/90_regression/rt19908-merlyn-stop.t .............. ok t/90_regression/rt1648-tied-stderr.t ............... ok t/90_regression/rt65460-forking.t .................. skipped: enable by setting (AUTOMATED|RELEASE)_TESTING t/90_regression/socketfactory-timeout.t ............ ok t/90_regression/rt47966-sigchld.t .................. skipped: enable by setting RELEASE_TESTING t/90_regression/somni-poco-server-tcp.t ............ skipped: Network access (and permission) required to run this test t/90_regression/rt23181-sigchld-rc.t ............... ok t/90_regression/rt56417-wheel-run.t ................ ok t/90_regression/steinert-passed-wheel.t ............ ok t/90_regression/ton-stop-corruption.t .............. ok t/90_regression/suzman_windows.t ................... ok t/90_regression/whelan-dieprop.t ................... ok t/90_regression/pipe-followtail.t .................. ok t/90_regression/tracing-sane-exit.t ................ ok t/90_regression/whjackson-followtail.t ............. ok Test Summary Report ------------------- t/30_loops/io_poll/z_rt39872_sigchld.t (Wstat: 1024 (exited 4) Tests: 4 Failed: 0) Non-zero exit status: 4 Parse errors: Bad plan. You planned 6 tests but ran 4. Files=157, Tests=3694, 16 wallclock secs ( 0.50 usr 0.14 sys + 9.88 cusr 2.04 csys = 12.56 CPU) Result: FAIL Failed 1/157 test programs. 0/3694 subtests failed. make: *** [Makefile:933: test_dynamic] Error 255 * ERROR: dev-perl/POE-1.368.0::gentoo failed (test phase): * emake failed * * If you need support, post the output of `emerge --info '=dev-perl/POE-1.368.0::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-perl/POE-1.368.0::gentoo'`. * The complete build log is located at '/var/log/portage/dev-perl:POE-1.368.0:20230526-085725.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-perl/POE-1.368.0/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-perl/POE-1.368.0/temp/environment'. * Working directory: '/var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368' * S: '/var/tmp/portage/dev-perl/POE-1.368.0/work/POE-1.368'