dev-perl:IO-AIO-4.790.0:20230215-040030.log

dev-perl:IO-AIO-4.790.0:20230215-040030.log (text/plain), 8.22 KB, created by Toralf Förster on 2023-02-15 18:29:29 UTC

 * Package:    dev-perl/IO-AIO-4.790.0:0
 * Repository: gentoo
 * Maintainer: [e-mail]
 * USE:        abi_x86_64 amd64 elibc_musl kernel_linux userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox userpriv usersandbox

>>> Unpacking source...
>>> Unpacking IO-AIO-4.79.tar.gz to /var/tmp/portage/dev-perl/IO-AIO-4.790.0/work
>>> Source unpacked in /var/tmp/portage/dev-perl/IO-AIO-4.790.0/work
>>> Preparing source in /var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79 ...
 * Using ExtUtils::MakeMaker
 * perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/dev-perl/IO-AIO-4.790.0/image

***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.036000, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by IO::AIO.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
***    With luck, no. While some distributions are known to fail
***    already, most should probably work. This message is here
***    to alert you that your perl is not supported by IO::AIO,
***    and if things go wrong, you either need to downgrade, or
***    sidegrade to the stability variant of your perl version,
***    or simply live with the consequences.
***
*** What is this canary thing?
***    It's purpose is to check support status of IO::AIO with
***    respect to your perl version.
***
*** What is this "stability branch"?
***    It's a branch or fork of the official perl, by schmorp, to
***    improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
***    Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
***    More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***

Continue anyways?  [y] y
checking for gcc... x86_64-gentoo-linux-musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-gentoo-linux-musl-gcc accepts -g... yes
checking for x86_64-gentoo-linux-musl-gcc option to enable C11 features... none needed
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for gcc... (cached) x86_64-gentoo-linux-musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-gentoo-linux-musl-gcc accepts -g... (cached) yes
checking for x86_64-gentoo-linux-musl-gcc option to enable C11 features... (cached) none needed
checking for stdint.h... (cached) yes
checking for sys/syscall.h... yes
checking for sys/prctl.h... yes
checking for library containing pthread_create... none required
checking for utimes... yes
checking for futimes... yes
checking for readahead... yes
checking for fdatasync... yes
checking for sendfile... yes
checking for sync_file_range... yes
checking for fallocate... yes
checking for sys_syncfs... yes
checking for prctl_set_name... yes
checking for posix_close... yes
checking for renameat2... yes
checking for set/getrlimit... yes
checking for posix_madvise... yes
checking for posix_fadvise... yes
checking for linux/fs.h... yes
checking for linux/fiemap.h... yes
checking for sys/sysmacros.h... yes
checking for sys/mkdev.h... no
checking for sys/uio.h... yes
checking for siginfo_t... yes
checking for unix-style syscall interface... yes
checking for splice, vmsplice and tee... yes
checking for pipe2... yes
checking for eventfd... yes
checking for timerfd_*... yes
checking for memfd_create... yes
checking for copy_file_range... yes
checking for st_xtimensec... no
checking for st_xtimespec... yes
checking for st_birthtimensec... no
checking for st_birthtimespec... no
checking for st_gen... no
checking for statx... no
checking for accept4... yes
checking for sys/mount.h... yes
checking for mount/umount... yes
checking for umount2... yes
configure: creating ./config.status
config.status: creating config.h
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for IO::AIO
Writing MYMETA.yml and MYMETA.json
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79 ...
make -j4 'OTHERLDFLAGS=-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0' 'OPTIMIZE=-pipe -march=native -fno-diagnostics-color -O2' 
Running Mkbootstrap for AIO ()
"/usr/bin/perl" "/usr/lib/perl5/5.36/ExtUtils/xsubpp"  -typemap '/usr/lib/perl5/5.36/ExtUtils/typemap' -typemap '/var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79/typemap'  AIO.xs > AIO.xsc
chmod 644 "AIO.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- AIO.bs blib/arch/auto/IO/AIO/AIO.bs 644
cp AIO.pm blib/lib/IO/AIO.pm
mv AIO.xsc AIO.c
x86_64-gentoo-linux-musl-gcc -c   -D_GNU_SOURCE -pipe -march=native -fno-diagnostics-color -O2 -fno-strict-aliasing -fwrapv -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -march=native -fno-diagnostics-color -O2   -DVERSION=\"4.79\" -DXS_VERSION=\"4.79\" -fPIC "-I/usr/lib/perl5/5.36/x86_64-linux/CORE"   AIO.c
AIO.xs: In function 'boot_IO__AIO':
AIO.xs:1281:15: error: invalid application of 'sizeof' to incomplete type 'struct fiemap'
 1281 |     const_iv (FS_IOC_FIEMAP)
      |               ^~~~~~~~~~~~~
AIO.xs:1149:42: note: in definition of macro 'const_iv'
 1149 | #   define const_iv(name) { # name, (IV) name },
      |                                          ^~~~
make: *** [Makefile:345: AIO.o] Error 1
 * ERROR: dev-perl/IO-AIO-4.790.0::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=dev-perl/IO-AIO-4.790.0::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-perl/IO-AIO-4.790.0::gentoo'`.
 * The complete build log is located at '/var/log/portage/dev-perl:IO-AIO-4.790.0:20230215-040030.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-perl/IO-AIO-4.790.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-perl/IO-AIO-4.790.0/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79'
 * S: '/var/tmp/portage/dev-perl/IO-AIO-4.790.0/work/IO-AIO-4.79'