[patch] Patch for support for 7800

7800.patch (text/plain), 2.57 KB, created by Boky on 2006-04-04 14:05:59 UTC

--- work/nvclock/src/backend/nv40.c	2006-04-04 22:44:45.000000000 +0200
+++ 7800/nv40.c	2006-02-20 21:45:06.000000000 +0100
@@ -105,9 +105,7 @@
 / - NV41 0x1f07 6800 pci-e (is this correct?)
 / - NV43 0x0703 6200/6600 cards
 / - NV44 0x0703 6200(Go)/Turbocache cards
-/ - NV46 0x0703 7300 (is this correct?)
-/ - NV47/NV49 0xff3f 7800/7900 cards
-/ - NV4B 0x1f07 7600 (is this correct?)
+/ - NV47 0xff3f 7800 cards (Does it support modding??)
 */
 
 static int nv40_get_default_mask()
@@ -123,16 +121,11 @@ static int nv40_get_default_mask()
 			break;
 		case NV43:
 		case NV44:
-		case NV46:
 			mask = 0x703;
 			break;
 		case NV47:
-		case NV49:
 			mask = 0xff3f;
 			break;
-		case NV4B:
-			mask = 0x1f07;
-			break;
 	}
 	return mask;
 }
@@ -179,8 +172,8 @@ static int nv40_get_hw_masked_units(char
 	{
 		if(byte)
 		{
-			*pmask = masked_units & 0xff; /* pixel */
-			*vmask = (masked_units >> 8) & 0xff; /* vertex */
+			*pmask = masked_units & 0xff;		/* pixel */
+			*vmask = (masked_units >> 8) & 0xff;	/* vertex */
 		}
 		else
 		{
@@ -259,7 +252,7 @@ static int nv40_get_pixel_pipelines(char
 		nv40_unit_mask_to_binary(pipe_cfg, nv40_get_default_mask() & 0xff, mask);
 
 	/* NV44/NV46 use 2 pixel units per pipeline */
-	if(nv_card->arch & (NV44 | NV46))
+	if(nv_card->arch == NV44)
 		*total = 2;
 	else
 		*total = 4;
@@ -342,7 +335,8 @@ static float nv43_get_fanspeed()
 	/  can be controlled so that the fan turns slower or faster.
 	/  The value stored in the registers needs to be inverted, so a value of 10% means 90% and so on. (0xff means off, 0 means on)
 	*/
-	float fanspeed = (0xff - (nv_card->PMC[0x15f4/4] & 0xff)) * 100/0xff;
+	/* On a 7800GS 5513 means 0 (?) interpolated from meassurements and 5% corresponds to 277 */
+	float fanspeed = (5513 - (nv_card->PMC[0x15f4/4] & 0x1fff)) * 100/5513;
 	return fanspeed;
 }
 
@@ -354,7 +348,7 @@ static void nv43_set_fanspeed(float spee
 	if(speed < 10 || speed > 100)
 		return;
 
-	value = 0x80000000 + (int)((100 - speed) * 0xff/100);
+	value = 0x80000000 + (int)((100 - speed) * 5513/100);
 	nv_card->PMC[0x15f4/4] = value;
 }
 
@@ -687,7 +681,7 @@ void nv40_init(void)
 	/* Temperature monitoring; all cards after the NV40 feature an internal temperature sensor.
 	/  Only it is disabled on most 6200/6600(GT) cards but we can re-enable it ;)
 	*/
-	if((nv_card->arch & (NV43 | NV44 | NV46 | NV47 | NV49 | NV4B)) && !(nv_card->caps & GPU_TEMP_MONITORING))
+	if((nv_card->arch & (NV43 | NV44 | NV47)) && !(nv_card->caps & GPU_TEMP_MONITORING))
 	{
 		nv_card->caps |= GPU_TEMP_MONITORING;
 		nv_card->sensor_name = (char*)strdup("GPU Internal Sensor");