* Package:    net-misc/nx-3.5.99.26:0
 * Repository: gentoo
 * Maintainer: voyageur@gentoo.org
 * USE:        abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox userpriv usersandbox

>>> Unpacking source...
>>> Unpacking nx-libs-3.5.99.26.tar.gz to /var/tmp/portage/net-misc/nx-3.5.99.26/work
>>> Source unpacked in /var/tmp/portage/net-misc/nx-3.5.99.26/work
>>> Preparing source in /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26 ...
 * Applying nx-3.5.99.26-binutils-2.36.patch ...
 [ ok ]
 * Applying nx-3.5.99.26-riscv64-support.patch ...
 [ ok ]
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcomp /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * Running eautoreconf in '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcomp' ...
 * Running 'libtoolize --install --copy --force --automake' ...
 [ ok ]
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/nx-3.5.99.26/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'autoheader' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: nx-libs-3.5.99.26/nxcomp/
 * Running elibtoolize in: nx-libs-3.5.99.26/nxcomp/build-aux/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxdialog /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * Running eautoreconf in '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxdialog' ...
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/nx-3.5.99.26/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: nx-libs-3.5.99.26/nxdialog/
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * Running eautoreconf in '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib' ...
 * Running 'libtoolize --install --copy --force --automake' ...
 [ ok ]
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/nx-3.5.99.26/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'autoheader' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: nx-libs-3.5.99.26/nx-X11/lib/
 * Running elibtoolize in: nx-libs-3.5.99.26/nx-X11/lib/build-aux/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcompshad /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * Running eautoreconf in '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcompshad' ...
 * Running 'libtoolize --install --copy --force --automake' ...
 [ ok ]
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/nx-3.5.99.26/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'autoheader' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: nx-libs-3.5.99.26/nxcompshad/
 * Running elibtoolize in: nx-libs-3.5.99.26/nxcompshad/build-aux/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxproxy /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * Running eautoreconf in '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxproxy' ...
 * Running 'libtoolize --install --copy --force --automake' ...
 [ ok ]
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/nx-3.5.99.26/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'autoheader' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: nx-libs-3.5.99.26/nxproxy/
 * Running elibtoolize in: nx-libs-3.5.99.26/nxproxy/build-aux/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
>>> Source prepared.
 * Clang 16 testing: this build is using a /etc/portage/bashrc hook!
>>> Configuring source in /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26 ...
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11 /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcomp /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/nx-3.5.99.26 --htmldir=/usr/share/doc/nx-3.5.99.26/html --with-sysroot=/ --libdir=/usr/lib64
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C++... yes
checking whether clang++ accepts -g... yes
checking for clang++ option to enable C++11 features... none needed
checking for a BSD-compatible install... /usr/lib/portage/python3.10/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of clang++... none
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for x86_64-pc-linux-gnu-gcc... clang
checking whether the compiler supports GNU C... yes
checking whether clang accepts -g... yes
checking for clang option to enable C11 features... none needed
checking whether clang understands -c and -o together... yes
checking dependency style of clang... none
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by clang... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-file... no
checking for file... file
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... x86_64-pc-linux-gnu-dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from clang object... ok
checking for sysroot... /
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if clang supports -fno-rtti -fno-exceptions... yes
checking for clang option to produce PIC... -fPIC -DPIC
checking if clang PIC flag -fPIC -DPIC works... yes
checking if clang static flag -static works... yes
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.o... (cached) yes
checking whether the clang linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... clang++ -E
checking for ld used by clang++... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) is GNU ld... yes
checking whether the clang++ linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking for clang++ option to produce PIC... -fPIC -DPIC
checking if clang++ PIC flag -fPIC -DPIC works... yes
checking if clang++ static flag -static works... yes
checking if clang++ supports -c -o file.o... yes
checking if clang++ supports -c -o file.o... (cached) yes
checking whether the clang++ linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for JPEG... yes
checking for PNG... yes
checking for Z... yes
checking for clang++ options needed to detect all undeclared functions... none needed
checking whether __clang__ is declared... yes
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking if clang++ supports -Werror=unknown-warning-option... yes
checking if clang++ supports -Werror=unused-command-line-argument... yes
checking if clang++ supports -Wall... yes
checking if clang++ supports -Wpointer-arith... yes
checking if clang++ supports -Wmissing-declarations... yes
checking if clang++ supports -Wformat=2... yes
checking if clang++ supports -Wunused... yes
checking if clang++ supports -Wuninitialized... yes
checking if clang++ supports -Wshadow... yes
checking if clang++ supports -Wmissing-noreturn... yes
checking if clang++ supports -Wmissing-format-attribute... yes
checking if clang++ supports -Wredundant-decls... yes
checking if clang++ supports -Wlogical-op... no
checking if clang++ supports -Werror=implicit... yes
checking if clang++ supports -Werror=nonnull... yes
checking if clang++ supports -Werror=init-self... yes
checking if clang++ supports -Werror=main... yes
checking if clang++ supports -Werror=missing-braces... yes
checking if clang++ supports -Werror=sequence-point... yes
checking if clang++ supports -Werror=return-type... yes
checking if clang++ supports -Werror=trigraphs... yes
checking if clang++ supports -Werror=array-bounds... yes
checking if clang++ supports -Werror=write-strings... yes
checking if clang++ supports -Werror=address... yes
checking if clang++ supports -Werror=int-to-pointer-cast... yes
checking if clang++ supports -Werror=pointer-to-int-cast... yes
checking if clang++ supports -pedantic... yes
checking if clang++ supports -Werror... yes
checking if clang++ supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for Cygwin32 environment... no
checking for Amd64 environment... yes
checking for Darwin environment... no
checking for Solaris environment... no
checking for FreeBSD environment... no
checking how to run the C preprocessor... clang -E
checking whether clang is Clang... yes
checking whether Clang needs flag to prevent "argument unused" warning when linking with -pthread... no
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking whether more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for in_addr_t... yes
checking if std::put_time is available... yes
checking if ::ctime_s is available... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating nxcomp.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxdialog /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-silent-rules --docdir=/usr/share/doc/nx-3.5.99.26 --htmldir=/usr/share/doc/nx-3.5.99.26/html --libdir=/usr/lib64
checking for a BSD-compatible install... /usr/lib/portage/python3.10/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating bin/Makefile
config.status: creating man/Makefile
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxcompshad /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/nx-3.5.99.26 --htmldir=/usr/share/doc/nx-3.5.99.26/html --with-sysroot=/ --libdir=/usr/lib64
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C++... yes
checking whether clang++ accepts -g... yes
checking for clang++ option to enable C++11 features... none needed
checking for a BSD-compatible install... /usr/lib/portage/python3.10/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of clang++... none
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for x86_64-pc-linux-gnu-gcc... clang
checking whether the compiler supports GNU C... yes
checking whether clang accepts -g... yes
checking for clang option to enable C11 features... none needed
checking whether clang understands -c and -o together... yes
checking dependency style of clang... none
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by clang... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-file... no
checking for file... file
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... x86_64-pc-linux-gnu-dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from clang object... ok
checking for sysroot... /
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if clang supports -fno-rtti -fno-exceptions... yes
checking for clang option to produce PIC... -fPIC -DPIC
checking if clang PIC flag -fPIC -DPIC works... yes
checking if clang static flag -static works... yes
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.o... (cached) yes
checking whether the clang linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... clang++ -E
checking for ld used by clang++... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) is GNU ld... yes
checking whether the clang++ linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking for clang++ option to produce PIC... -fPIC -DPIC
checking if clang++ PIC flag -fPIC -DPIC works... yes
checking if clang++ static flag -static works... yes
checking if clang++ supports -c -o file.o... yes
checking if clang++ supports -c -o file.o... (cached) yes
checking whether the clang++ linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for Xext... yes
checking for Xdamage... yes
checking for Xrandr... yes
checking for Xtst... yes
checking for clang++ options needed to detect all undeclared functions... none needed
checking whether __clang__ is declared... yes
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking if clang++ supports -Werror=unknown-warning-option... yes
checking if clang++ supports -Werror=unused-command-line-argument... yes
checking if clang++ supports -Wall... yes
checking if clang++ supports -Wpointer-arith... yes
checking if clang++ supports -Wmissing-declarations... yes
checking if clang++ supports -Wformat=2... yes
checking if clang++ supports -Wunused... yes
checking if clang++ supports -Wuninitialized... yes
checking if clang++ supports -Wshadow... yes
checking if clang++ supports -Wmissing-noreturn... yes
checking if clang++ supports -Wmissing-format-attribute... yes
checking if clang++ supports -Wredundant-decls... yes
checking if clang++ supports -Wlogical-op... no
checking if clang++ supports -Werror=implicit... yes
checking if clang++ supports -Werror=nonnull... yes
checking if clang++ supports -Werror=init-self... yes
checking if clang++ supports -Werror=main... yes
checking if clang++ supports -Werror=missing-braces... yes
checking if clang++ supports -Werror=sequence-point... yes
checking if clang++ supports -Werror=return-type... yes
checking if clang++ supports -Werror=trigraphs... yes
checking if clang++ supports -Werror=array-bounds... yes
checking if clang++ supports -Werror=write-strings... yes
checking if clang++ supports -Werror=address... yes
checking if clang++ supports -Werror=int-to-pointer-cast... yes
checking if clang++ supports -Werror=pointer-to-int-cast... yes
checking if clang++ supports -pedantic... yes
checking if clang++ supports -Werror... yes
checking if clang++ supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking if target system is ELF-based... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating nxcompshad.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nxproxy /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/nx-3.5.99.26 --htmldir=/usr/share/doc/nx-3.5.99.26/html --with-sysroot=/ --libdir=/usr/lib64
checking for x86_64-pc-linux-gnu-gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether clang accepts -g... yes
checking for clang option to enable C11 features... none needed
checking whether clang understands -c and -o together... yes
checking for a BSD-compatible install... /usr/lib/portage/python3.10/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of clang... none
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by clang... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-file... no
checking for file... file
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... x86_64-pc-linux-gnu-dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from clang object... ok
checking for sysroot... /
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if clang supports -fno-rtti -fno-exceptions... yes
checking for clang option to produce PIC... -fPIC -DPIC
checking if clang PIC flag -fPIC -DPIC works... yes
checking if clang static flag -static works... yes
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.o... (cached) yes
checking whether the clang linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for clang options needed to detect all undeclared functions... (cached) none needed
checking whether __clang__ is declared... yes
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking if clang supports -Werror=unknown-warning-option... yes
checking if clang supports -Werror=unused-command-line-argument... yes
checking if clang supports -Wall... yes
checking if clang supports -Wpointer-arith... yes
checking if clang supports -Wmissing-declarations... yes
checking if clang supports -Wformat=2... yes
checking if clang supports -Wstrict-prototypes... yes
checking if clang supports -Wmissing-prototypes... yes
checking if clang supports -Wnested-externs... yes
checking if clang supports -Wbad-function-cast... yes
checking if clang supports -Wold-style-definition... yes
checking if clang supports -Wdeclaration-after-statement... yes
checking if clang supports -Wunused... yes
checking if clang supports -Wuninitialized... yes
checking if clang supports -Wshadow... yes
checking if clang supports -Wmissing-noreturn... yes
checking if clang supports -Wmissing-format-attribute... yes
checking if clang supports -Wredundant-decls... yes
checking if clang supports -Wlogical-op... no
checking if clang supports -Werror=implicit... yes
checking if clang supports -Werror=nonnull... yes
checking if clang supports -Werror=init-self... yes
checking if clang supports -Werror=main... yes
checking if clang supports -Werror=missing-braces... yes
checking if clang supports -Werror=sequence-point... yes
checking if clang supports -Werror=return-type... yes
checking if clang supports -Werror=trigraphs... yes
checking if clang supports -Werror=array-bounds... yes
checking if clang supports -Werror=write-strings... yes
checking if clang supports -Werror=address... yes
checking if clang supports -Werror=int-to-pointer-cast... yes
checking if clang supports -Werror=pointer-to-int-cast... yes
checking if clang supports -pedantic... yes
checking if clang supports -Werror... yes
checking if clang supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking if target system is ELF-based... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating man/Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxproxy/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxdialog/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcompshad/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nxcomp/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating nx-libs-3.5.99.26/nx-X11/lib/build-aux/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/nx-3.5.99.26 --htmldir=/usr/share/doc/nx-3.5.99.26/html --with-sysroot=/ --libdir=/usr/lib64 --disable-poll
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for x86_64-pc-linux-gnu-gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether clang accepts -g... yes
checking for clang option to enable C11 features... none needed
checking whether clang understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking for sys/param.h... yes
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/lib/portage/python3.10/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of clang... none
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by clang... /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld
checking if the linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-file... no
checking for file... file
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... x86_64-pc-linux-gnu-dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from clang object... ok
checking for sysroot... /
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if clang supports -fno-rtti -fno-exceptions... yes
checking for clang option to produce PIC... -fPIC -DPIC
checking if clang PIC flag -fPIC -DPIC works... yes
checking if clang static flag -static works... yes
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.o... (cached) yes
checking whether the clang linker (/usr/lib/llvm/15/bin/x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for clang options needed to detect all undeclared functions... (cached) none needed
checking whether __clang__ is declared... yes
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking if clang supports -Werror=unknown-warning-option... yes
checking if clang supports -Werror=unused-command-line-argument... yes
checking if clang supports -Wall... yes
checking if clang supports -Wpointer-arith... yes
checking if clang supports -Wmissing-declarations... yes
checking if clang supports -Wformat=2... yes
checking if clang supports -Wstrict-prototypes... yes
checking if clang supports -Wmissing-prototypes... yes
checking if clang supports -Wnested-externs... yes
checking if clang supports -Wbad-function-cast... yes
checking if clang supports -Wold-style-definition... yes
checking if clang supports -Wdeclaration-after-statement... yes
checking if clang supports -Wunused... yes
checking if clang supports -Wuninitialized... yes
checking if clang supports -Wshadow... yes
checking if clang supports -Wmissing-noreturn... yes
checking if clang supports -Wmissing-format-attribute... yes
checking if clang supports -Wredundant-decls... yes
checking if clang supports -Wlogical-op... no
checking if clang supports -Werror=implicit... yes
checking if clang supports -Werror=nonnull... yes
checking if clang supports -Werror=init-self... yes
checking if clang supports -Werror=main... yes
checking if clang supports -Werror=missing-braces... yes
checking if clang supports -Werror=sequence-point... yes
checking if clang supports -Werror=return-type... yes
checking if clang supports -Werror=trigraphs... yes
checking if clang supports -Werror=array-bounds... yes
checking if clang supports -Werror=write-strings... yes
checking if clang supports -Werror=address... yes
checking if clang supports -Werror=int-to-pointer-cast... yes
checking if clang supports -Werror=pointer-to-int-cast... yes
checking if clang supports -pedantic... yes
checking if clang supports -Werror... yes
checking if clang supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XDMCP... yes
checking for XdmcpWrap in -lXdmcp... yes
checking for XdmcpWrap in -lXdmcp... (cached) yes
checking if Xtrans should support UNIX socket connections... yes
checking if Xtrans should support TCP socket connections... yes
checking for library containing socket... none required
checking for library containing gethostbyname... none required
checking for getaddrinfo... yes
checking if IPv6 support should be built... yes
checking for struct sockaddr_in.sin_len... no
checking for socklen_t... yes
checking for struct msghdr.msg_control... yes
checking if Xtrans should support nxcomp mediated connections... yes
checking for library containing socket... (cached) none required
checking for library containing gethostbyname... (cached) none required
checking for getaddrinfo... (cached) yes
checking if IPv6 support should be built... yes
checking for struct sockaddr_in.sin_len... (cached) no
checking for socklen_t... (cached) yes
checking for struct msghdr.msg_control... (cached) yes
checking for authdes_seccreate... no
checking for authdes_create... no
checking if Secure RPC authentication ("SUN-DES-1") should be supported... no
checking if run-time linking is supported... checking for library containing dlopen... none required
checking for dlfcn.h... (cached) yes
yes
checking if loadable Xcursor library support should be enabled... yes
checking for sys/select.h... yes
checking for strtol... yes
checking for seteuid... yes
checking whether issetugid is declared... no
checking for issetugid... no
checking for getresuid... yes
checking for shmat... yes
checking for getpwuid_r in -lc... yes
checking for pthread_self in -lc... yes
checking for poll... yes
checking keysym definitions...  /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib/../include/keysymdef.h /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib/../include/XF86keysym.h /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib/../include/Sunkeysym.h /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib/../include/DECkeysym.h /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11/lib/../include/HPkeysym.h
checking if XLOCALEDIR support should be enabled... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for nl_langinfo... yes
checking whether malloc(0) returns NULL... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating modules/im/ximcp/Makefile
config.status: creating modules/im/Makefile
config.status: creating modules/lc/gen/Makefile
config.status: creating modules/lc/def/Makefile
config.status: creating modules/lc/Utf8/Makefile
config.status: creating modules/lc/Makefile
config.status: creating modules/om/generic/Makefile
config.status: creating modules/om/Makefile
config.status: creating modules/Makefile
config.status: creating src/util/Makefile
config.status: creating src/xcms/Makefile
config.status: creating src/xkb/Makefile
config.status: creating src/xlibi18n/Makefile
config.status: creating src/Makefile
config.status: creating Makefile
config.status: creating nx-x11.pc
config.status: creating src/config.h
config.status: creating include/X11/XlibConf.h
config.status: executing depfiles commands
config.status: executing libtool commands

NX_X11 will be built with the following settings:
 Loadable xcursor library support:        yes
 Threading support:                       yes
 Use Threads safe API:                    yes
 Threads stubs in libNX_X11:              no
 USE_POLL:                                no
 XCMS:                                    yes
 Internationalization support:            yes
 XF86BigFont support:                     yes
 XKB support:                             yes
 XLOCALEDIR environment variable support: yes
 Compose table cache enabled:             yes

/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26
>>> Source configured.
'/var/tmp/portage/net-misc/nx-3.5.99.26/temp/clang16-errors.log' -> '/var/tmp/clang/net-misc/nx-3.5.99.26/clang16-errors.log'
'/var/tmp/portage/net-misc/nx-3.5.99.26/temp/clang16-safe.log' -> '/var/tmp/clang/net-misc/nx-3.5.99.26/clang16-safe.log'
>>> Compiling source in /var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26 ...
make -j4 build-env 
Makefile:31: xkbcomp devel package missing, using imake default values
# prepare nx-X11/config/cf/nxversion.def
# auto-config some setting
sed \
    -e 's/###NX_VERSION_MAJOR###/3/' \
    -e 's/###NX_VERSION_MINOR###/5/' \
    -e 's/###NX_VERSION_MICRO###/99/' \
    -e 's/###NX_VERSION_PATCH###/26/' \
    nx-X11/config/cf/nxversion.def.in \
    > nx-X11/config/cf/nxversion.def
# check if system supports Xfont2
(echo "#define HasXfont2 `pkg-config --exists xfont2 && echo YES || echo NO`") >nx-X11/config/cf/nxconfig.def
# check if system has an _old_ release of Xfont1
(echo "#define HasLegacyXfont1 `pkg-config --exists 'xfont < 1.4.2' && echo YES || echo NO`") >>nx-X11/config/cf/nxconfig.def
# check if system has an _old_ release of XextProto
(echo "#define HasLegacyXextProto `pkg-config --exists 'xextproto < 7.1.0' && echo YES || echo NO`") >>nx-X11/config/cf/nxconfig.def
# the system's directory with the xkb data and binary files (these
# needs to be independent of Imake's ProjectRoot or the configure
# prefix.)
(pkg-config --exists xkbcomp && echo "#define SystemXkbConfigDir `pkg-config xkbcomp --variable=xkbconfigdir`"; :) >>nx-X11/config/cf/nxconfig.def
(pkg-config --exists xkbcomp && echo "#define SystemXkbBinDir `pkg-config xkbcomp --variable=prefix`/bin"; :) >>nx-X11/config/cf/nxconfig.def
(pkg-config --exists fontutil && echo "#define SystemFontRootDir `pkg-config fontutil --variable=fontrootdir`"; :) >>nx-X11/config/cf/nxconfig.def
# let's create the nx-X11 Makefiles now, once everything has been defined
make -j1 -C nx-X11 Makefiles IMAKE_DEFINES=""
make[1]: Entering directory '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11'
make[1]: warning: -j1 forced in submake: resetting jobserver mode.
if [ -f xmakefile ]; then \
    set -x; \
    rm -f xmakefile.bak; \
    mv xmakefile xmakefile.bak; \
else \
    exit 0; \
fi
which imake 1>/dev/null && imake -I./config/cf  -j1 -s xmakefile -DTOPDIR=. -DCURDIR=.
In file included from Imakefile.c:33:
In file included from ./config/cf/Imake.tmpl:289:
./config/cf/Imake.rules:1720:27: warning: empty character
      constant [-Winvalid-pp-token]
        for flag in ${MAKEFLAGS} ''; do \                               @@\
                                 ^
In file included from Imakefile.c:33:
./config/cf/Imake.tmpl:2071:10: fatal error: ' X11 .rules'
      file not found
#include ProjectRulesFile
         ^~~~~~~~~~~~~~~~
./config/cf/Imake.tmpl:2069:35: note: expanded from macro
      'ProjectRulesFile'
# define ProjectRulesFile       Concat3(<,TopLevelProject,.rules>)
                                ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
./config/cf/Imake.rules:254:23: note: expanded from macro
      'Concat3'
#define Concat3(a,b,c)a/**/b/**/c
                      ^~~~~~~~~~~
<scratch space>:3:1: note: expanded from here
< X11 .rules>
^~~~~~~~~~~~~
1 warning and 1 error generated.
imake: Exit code 1.
  Stop.
make[1]: *** [Makefile:67: xmakefile] Error 1
make[1]: Leaving directory '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26/nx-X11'
make: *** [Makefile:122: imakeconfig] Error 2
 * ERROR: net-misc/nx-3.5.99.26::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=net-misc/nx-3.5.99.26::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=net-misc/nx-3.5.99.26::gentoo'`.
 * The complete build log is located at '/var/log/portage/net-misc:nx-3.5.99.26:20221111-120226.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/net-misc/nx-3.5.99.26/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-misc/nx-3.5.99.26/temp/environment'.
 * Working directory: '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26'
 * S: '/var/tmp/portage/net-misc/nx-3.5.99.26/work/nx-libs-3.5.99.26'