dmesg of 2.6.16-rc5

dmesg2616rc5.txt (text/plain), 52.13 KB, created by Raphael on 2006-03-09 02:28:57 UTC

Mar  8 19:21:43 localhost syslog-ng[7823]: syslog-ng version 1.6.8 starting
Mar  8 19:21:43 localhost syslog-ng[7823]: Changing permissions on special file /dev/tty12
Mar  8 19:21:43 localhost Bootdata ok (command line is root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev  report_lost_ticks=100)
Mar  8 19:21:43 localhost Linux version 2.6.16-rc5 (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Wed Mar 8 
18:47:41 GMT 2006
Mar  8 19:21:43 localhost BIOS-provided physical RAM map:
Mar  8 19:21:43 localhost BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar  8 19:21:43 localhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar  8 19:21:43 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  8 19:21:43 localhost BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
Mar  8 19:21:43 localhost BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
Mar  8 19:21:43 localhost BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
Mar  8 19:21:43 localhost BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Mar  8 19:21:43 localhost BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar  8 19:21:43 localhost ACPI: RSDP (v000 RS480                                 ) @ 0x00000000000f8070
Mar  8 19:21:43 localhost ACPI: RSDT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040
Mar  8 19:21:43 localhost ACPI: FADT (v002 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0
Mar  8 19:21:43 localhost ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000003bef69c0
Mar  8 19:21:43 localhost ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000003bef6ac0
Mar  8 19:21:43 localhost ACPI: MCFG (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6bc0
Mar  8 19:21:43 localhost ACPI: MADT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6900
Mar  8 19:21:43 localhost ACPI: DSDT (v001 RS480  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Mar  8 19:21:43 localhost On node 0 totalpages: 240825
Mar  8 19:21:43 localhost DMA zone: 2733 pages, LIFO batch:0
Mar  8 19:21:43 localhost DMA32 zone: 238092 pages, LIFO batch:31
Mar  8 19:21:43 localhost Normal zone: 0 pages, LIFO batch:0
Mar  8 19:21:43 localhost HighMem zone: 0 pages, LIFO batch:0
Mar  8 19:21:43 localhost ATI board detected. Disabling timer routing over 8254.
Mar  8 19:21:43 localhost ACPI: PM-Timer IO Port: 0x4008
Mar  8 19:21:43 localhost ACPI: Local APIC address 0xfee00000
Mar  8 19:21:43 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar  8 19:21:43 localhost Processor #0 15:15 APIC version 16
Mar  8 19:21:43 localhost ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar  8 19:21:43 localhost ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar  8 19:21:43 localhost ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mar  8 19:21:43 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  8 19:21:43 localhost IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Mar  8 19:21:43 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  8 19:21:43 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Mar  8 19:21:43 localhost ACPI: IRQ0 used by override.
Mar  8 19:21:43 localhost ACPI: IRQ2 used by override.
Mar  8 19:21:43 localhost Setting APIC routing to flat
Mar  8 19:21:43 localhost Using ACPI (MADT) for SMP configuration information
Mar  8 19:21:43 localhost Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
Mar  8 19:21:43 localhost Checking aperture...
Mar  8 19:21:43 localhost CPU 0: aperture @ 88000000 size 32 MB
Mar  8 19:21:43 localhost Aperture from northbridge cpu 0 too small (32 MB)
Mar  8 19:21:43 localhost No AGP bridge found
Mar  8 19:21:43 localhost Built 1 zonelists
Mar  8 19:21:43 localhost Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev  report_lost_ticks=100
Mar  8 19:21:43 localhost Initializing CPU#0
Mar  8 19:21:43 localhost PID hash table entries: 4096 (order: 12, 131072 bytes)
Mar  8 19:21:43 localhost time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
Mar  8 19:21:43 localhost time.c: Detected 1790.898 MHz processor.
Mar  8 19:21:43 localhost Console: colour VGA+ 80x25
Mar  8 19:21:43 localhost Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mar  8 19:21:43 localhost Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar  8 19:21:43 localhost Memory: 959640k/981952k available (3108k kernel code, 21432k reserved, 1109k data, 208k init)
Mar  8 19:21:43 localhost Calibrating delay using timer specific routine.. 3589.22 BogoMIPS (lpj=7178450)
Mar  8 19:21:43 localhost Mount-cache hash table entries: 256
Mar  8 19:21:43 localhost CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 19:21:43 localhost CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 19:21:43 localhost CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Mar  8 19:21:43 localhost time.c: Lost 1 timer tick(s)! rip acpi_os_write_port+0x1a/0x34)
Mar  8 19:21:43 localhost ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Mar  8 19:21:43 localhost failed.
Mar  8 19:21:43 localhost time.c: Lost 9 timer tick(s)! rip __delay+0x6/0x20)
Mar  8 19:21:43 localhost works.
Mar  8 19:21:43 localhost Using local APIC timer interrupts.
Mar  8 19:21:43 localhost result 12436798
Mar  8 19:21:43 localhost Detected 12.436 MHz APIC timer.
Mar  8 19:21:43 localhost time.c: Lost 14 timer tick(s)! rip setup_boot_APIC_clock+0x155/0x160)
Mar  8 19:21:43 localhost testing NMI watchdog ... OK.
Mar  8 19:21:43 localhost checking if image is initramfs... it is
Mar  8 19:21:43 localhost Freeing initrd memory: 1469k freed
Mar  8 19:21:43 localhost DMI 2.4 present.
Mar  8 19:21:43 localhost NET: Registered protocol family 16
Mar  8 19:21:43 localhost ACPI: bus type pci registered
Mar  8 19:21:43 localhost PCI: Using configuration type 1
Mar  8 19:21:43 localhost PCI: Using MMCONFIG at e0000000
Mar  8 19:21:43 localhost ACPI: Subsystem revision 20060127
Mar  8 19:21:43 localhost GSI 21 sharing vector 0xA9 and IRQ 21
Mar  8 19:21:43 localhost ACPI: Interpreter enabled
Mar  8 19:21:43 localhost ACPI: Using IOAPIC for interrupt routing
Mar  8 19:21:43 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  8 19:21:43 localhost PCI: Probing PCI hardware (bus 00)
Mar  8 19:21:43 localhost ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Mar  8 19:21:43 localhost PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Mar  8 19:21:43 localhost Boot video device is 0000:01:05.0
Mar  8 19:21:43 localhost PCI: Transparent bridge - 0000:00:14.4
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11)
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled.
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11)
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Mar  8 19:21:43 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Mar  8 19:21:43 localhost SCSI subsystem initialized
Mar  8 19:21:43 localhost usbcore: registered new driver usbfs
Mar  8 19:21:43 localhost usbcore: registered new driver hub
Mar  8 19:21:43 localhost PCI: Using ACPI for IRQ routing
Mar  8 19:21:43 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  8 19:21:43 localhost PCI: Cannot allocate resource region 3 of device 0000:00:00.0
Mar  8 19:21:43 localhost TC classifier action (bugs to [e-mail] cc [e-mail])
Mar  8 19:21:43 localhost PCI-DMA: Disabling IOMMU.
Mar  8 19:21:43 localhost PCI: Bridge: 0000:00:01.0
Mar  8 19:21:43 localhost IO window: e000-efff
Mar  8 19:21:43 localhost MEM window: fdd00000-fddfffff
Mar  8 19:21:43 localhost PREFETCH window: d8000000-dfffffff
Mar  8 19:21:43 localhost PCI: Bridge: 0000:00:14.4
Mar  8 19:21:43 localhost IO window: d000-dfff
Mar  8 19:21:43 localhost MEM window: fdc00000-fdcfffff
Mar  8 19:21:43 localhost PREFETCH window: fde00000-fdefffff
Mar  8 19:21:43 localhost IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Mar  8 19:21:43 localhost Total HugeTLB memory allocated, 0
Mar  8 19:21:43 localhost JFS: nTxBlock = 7512, nTxLock = 60100
Mar  8 19:21:43 localhost SGI XFS with ACLs, large block/inode numbers, no debug enabled
Mar  8 19:21:43 localhost Initializing Cryptographic API
Mar  8 19:21:43 localhost io scheduler noop registered
Mar  8 19:21:43 localhost io scheduler anticipatory registered (default)
Mar  8 19:21:43 localhost io scheduler deadline registered
Mar  8 19:21:43 localhost io scheduler cfq registered
Mar  8 19:21:43 localhost time.c: Lost 2 timer tick(s)! rip msleep+0x4/0x40)
Mar  8 19:21:43 localhost time.c: Lost 2 timer tick(s)! rip msleep+0x4/0x40)
Mar  8 19:21:43 localhost pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar  8 19:21:43 localhost acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar  8 19:21:43 localhost acpiphp_glue: can't get bus number, assuming 0
Mar  8 19:21:43 localhost ACPI: Power Button (FF) [PWRF]
Mar  8 19:21:43 localhost ACPI: Power Button (CM) [PWRB]
Mar  8 19:21:43 localhost ACPI: Processor [CPU0] (supports 8 throttling states)
Mar  8 19:21:43 localhost Real Time Clock Driver v1.12ac
Mar  8 19:21:43 localhost Non-volatile memory driver v1.2
Mar  8 19:21:43 localhost Linux agpgart interface v0.101 (c) Dave Jones
Mar  8 19:21:43 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  8 19:21:43 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  8 19:21:43 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  8 19:21:43 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  8 19:21:43 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  8 19:21:43 localhost RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Mar  8 19:21:43 localhost loop: loaded (max 8 devices)
Mar  8 19:21:43 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar  8 19:21:43 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar  8 19:21:43 localhost ATIIXP: IDE controller at PCI slot 0000:00:14.1
Mar  8 19:21:43 localhost GSI 16 sharing vector 0xB1 and IRQ 16
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
Mar  8 19:21:43 localhost ATIIXP: chipset revision 0
Mar  8 19:21:43 localhost ATIIXP: not 100% native mode: will probe irqs later
Mar  8 19:21:43 localhost ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio
Mar  8 19:21:43 localhost ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
Mar  8 19:21:43 localhost Probing IDE interface ide0...
Mar  8 19:21:43 localhost hda: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive
Mar  8 19:21:43 localhost ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar  8 19:21:43 localhost Probing IDE interface ide1...
Mar  8 19:21:43 localhost Probing IDE interface ide1...
Mar  8 19:21:43 localhost hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar  8 19:21:43 localhost Uniform CD-ROM driver Revision: 3.20
Mar  8 19:21:43 localhost usbmon: debugfs is not available
Mar  8 19:21:43 localhost mice: PS/2 mouse device common for all mice
Mar  8 19:21:43 localhost md: linear personality registered for level -1
Mar  8 19:21:43 localhost md: raid0 personality registered for level 0
Mar  8 19:21:43 localhost md: raid1 personality registered for level 1
Mar  8 19:21:43 localhost md: raid5 personality registered for level 5
Mar  8 19:21:43 localhost md: raid4 personality registered for level 4
Mar  8 19:21:43 localhost raid5: automatically using best checksumming function: generic_sse
Mar  8 19:21:43 localhost generic_sse:  5475.000 MB/sec
Mar  8 19:21:43 localhost raid5: using function: generic_sse (5475.000 MB/sec)
Mar  8 19:21:43 localhost raid6: int64x1   1666 MB/s
Mar  8 19:21:43 localhost raid6: int64x2   2387 MB/s
Mar  8 19:21:43 localhost raid6: int64x4   2344 MB/s
Mar  8 19:21:43 localhost raid6: int64x8   1598 MB/s
Mar  8 19:21:43 localhost raid6: sse2x1     818 MB/s
Mar  8 19:21:43 localhost raid6: sse2x2    1495 MB/s
Mar  8 19:21:43 localhost raid6: sse2x4    2039 MB/s
Mar  8 19:21:43 localhost raid6: using algorithm sse2x4 (2039 MB/s)
Mar  8 19:21:43 localhost md: raid6 personality registered for level 6
Mar  8 19:21:43 localhost md: multipath personality registered for level -4
Mar  8 19:21:43 localhost md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar  8 19:21:43 localhost md: bitmap version 4.39
Mar  8 19:21:43 localhost device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [e-mail]
Mar  8 19:21:43 localhost NET: Registered protocol family 2
Mar  8 19:21:43 localhost IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar  8 19:21:43 localhost TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar  8 19:21:43 localhost TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar  8 19:21:43 localhost TCP: Hash tables configured (established 131072 bind 65536)
Mar  8 19:21:43 localhost TCP reno registered
Mar  8 19:21:43 localhost TCP bic registered
Mar  8 19:21:43 localhost NET: Registered protocol family 1
Mar  8 19:21:43 localhost NET: Registered protocol family 10
Mar  8 19:21:43 localhost lo: Disabled Privacy Extensions
Mar  8 19:21:43 localhost IPv6 over IPv4 tunneling driver
Mar  8 19:21:43 localhost NET: Registered protocol family 17
Mar  8 19:21:43 localhost NET: Registered protocol family 15
Mar  8 19:21:43 localhost ACPI wakeup devices: 
Mar  8 19:21:43 localhost PCI0 USB0 USB1 USB2 AUDO  P2P  MAC 
Mar  8 19:21:43 localhost ACPI: (supports S0 S1 S3 S5)
Mar  8 19:21:43 localhost BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Mar  8 19:21:43 localhost Freeing unused kernel memory: 208k freed
Mar  8 19:21:43 localhost GSI 17 sharing vector 0xB9 and IRQ 17
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:21:43 localhost ehci_hcd 0000:00:13.2: EHCI Host Controller
Mar  8 19:21:43 localhost ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
Mar  8 19:21:43 localhost ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
Mar  8 19:21:43 localhost ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  8 19:21:43 localhost usb usb1: configuration #1 chosen from 1 choice
Mar  8 19:21:43 localhost hub 1-0:1.0: USB hub found
Mar  8 19:21:43 localhost hub 1-0:1.0: 8 ports detected
Mar  8 19:21:43 localhost input: AT Translated Set 2 keyboard as /class/input/input0
Mar  8 19:21:43 localhost usb 1-7: new high speed USB device using ehci_hcd and address 3
Mar  8 19:21:43 localhost usb 1-7: configuration #1 chosen from 1 choice
Mar  8 19:21:43 localhost usbcore: registered new driver hiddev
Mar  8 19:21:43 localhost usbcore: registered new driver usbhid
Mar  8 19:21:43 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  8 19:21:43 localhost Initializing USB Mass Storage driver...
Mar  8 19:21:43 localhost scsi0 : SCSI emulation for USB Mass Storage devices
Mar  8 19:21:43 localhost usbcore: registered new driver usb-storage
Mar  8 19:21:43 localhost USB Mass Storage support registered.
Mar  8 19:21:43 localhost usb-storage: device found at 3
Mar  8 19:21:43 localhost usb-storage: waiting for device to settle before scanning
Mar  8 19:21:43 localhost USB Universal Host Controller Interface driver v2.3
Mar  8 19:21:43 localhost ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.0: OHCI Host Controller
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.0: irq 17, io mem 0xfe02d000
Mar  8 19:21:43 localhost usb usb2: configuration #1 chosen from 1 choice
Mar  8 19:21:43 localhost hub 2-0:1.0: USB hub found
Mar  8 19:21:43 localhost hub 2-0:1.0: 4 ports detected
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.1: OHCI Host Controller
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
Mar  8 19:21:43 localhost ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02c000
Mar  8 19:21:43 localhost usb usb3: configuration #1 chosen from 1 choice
Mar  8 19:21:43 localhost hub 3-0:1.0: USB hub found
Mar  8 19:21:43 localhost hub 3-0:1.0: 4 ports detected
Mar  8 19:21:43 localhost libata version 1.20 loaded.
Mar  8 19:21:43 localhost sata_sil 0000:00:11.0: version 0.9
Mar  8 19:21:43 localhost GSI 18 sharing vector 0xC1 and IRQ 18
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 18
Mar  8 19:21:43 localhost ata1: SATA max UDMA/100 cmd 0xFFFFC2000002E080 ctl 0xFFFFC2000002E08A bmdma 0xFFFFC2000002E000 irq 18
Mar  8 19:21:43 localhost ata2: SATA max UDMA/100 cmd 0xFFFFC2000002E0C0 ctl 0xFFFFC2000002E0CA bmdma 0xFFFFC2000002E008 irq 18
Mar  8 19:21:43 localhost ata1: SATA link down (SStatus 0)
Mar  8 19:21:43 localhost scsi1 : sata_sil
Mar  8 19:21:43 localhost ata2: SATA link down (SStatus 0)
Mar  8 19:21:43 localhost scsi2 : sata_sil
Mar  8 19:21:43 localhost GSI 19 sharing vector 0xC9 and IRQ 19
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
Mar  8 19:21:43 localhost ata3: SATA max UDMA/100 cmd 0xFFFFC20000030080 ctl 0xFFFFC2000003008A bmdma 0xFFFFC20000030000 irq 19
Mar  8 19:21:43 localhost ata4: SATA max UDMA/100 cmd 0xFFFFC200000300C0 ctl 0xFFFFC200000300CA bmdma 0xFFFFC20000030008 irq 19
Mar  8 19:21:43 localhost ata3: SATA link up 1.5 Gbps (SStatus 113)
Mar  8 19:21:43 localhost usb 3-1: new low speed USB device using ohci_hcd and address 2
Mar  8 19:21:43 localhost ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:40ff
Mar  8 19:21:43 localhost ata3: dev 0 ATA-7, max UDMA7, 390721968 sectors: LBA48
Mar  8 19:21:43 localhost ata3: dev 0 configured for UDMA/100
Mar  8 19:21:43 localhost scsi3 : sata_sil
Mar  8 19:21:43 localhost usb 3-1: configuration #1 chosen from 1 choice
Mar  8 19:21:43 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
Mar  8 19:21:43 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-1
Mar  8 19:21:43 localhost ata4: SATA link down (SStatus 0)
Mar  8 19:21:43 localhost scsi4 : sata_sil
Mar  8 19:21:43 localhost Vendor: ATA       Model: SAMSUNG SP2004C   Rev: VM10
Mar  8 19:21:43 localhost Type:   Direct-Access                      ANSI SCSI revision: 05
Mar  8 19:21:43 localhost SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Mar  8 19:21:43 localhost sda: Write Protect is off
Mar  8 19:21:43 localhost sda: Mode Sense: 00 3a 00 00
Mar  8 19:21:43 localhost SCSI device sda: drive cache: write back
Mar  8 19:21:43 localhost SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Mar  8 19:21:43 localhost sda: Write Protect is off
Mar  8 19:21:43 localhost sda: Mode Sense: 00 3a 00 00
Mar  8 19:21:43 localhost SCSI device sda: drive cache: write back
Mar  8 19:21:43 localhost sda: sda1 sda2 sda3 < sda5 sda6 > sda4
Mar  8 19:21:43 localhost sd 3:0:0:0: Attached scsi disk sda
Mar  8 19:21:43 localhost sd 3:0:0:0: Attached scsi generic sg0 type 0
Mar  8 19:21:43 localhost ReiserFS: sda5: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda5
Mar  8 19:21:43 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:21:43 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:21:43 localhost EXT3 FS on sda5, internal journal
Mar  8 19:21:43 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:21:43 localhost Vendor: USB2.0    Model: CF  CardReader    Rev:     
Mar  8 19:21:43 localhost Type:   Direct-Access                      ANSI SCSI revision: 00
Mar  8 19:21:43 localhost sd 0:0:0:0: Attached scsi removable disk sdb
Mar  8 19:21:43 localhost sd 0:0:0:0: Attached scsi generic sg1 type 0
Mar  8 19:21:43 localhost Vendor: USB2.0    Model: CBO CardReader    Rev:     
Mar  8 19:21:43 localhost Type:   Direct-Access                      ANSI SCSI revision: 00
Mar  8 19:21:43 localhost sd 0:0:0:1: Attached scsi removable disk sdc
Mar  8 19:21:43 localhost sd 0:0:0:1: Attached scsi generic sg2 type 0
Mar  8 19:21:43 localhost usb-storage: device scan complete
Mar  8 19:21:43 localhost Adding 2811332k swap on /dev/sda6.  Priority:-1 extents:1 across:2811332k
Mar  8 19:21:43 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:21:43 localhost EXT3 FS on sda5, internal journal
Mar  8 19:21:43 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:21:43 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:21:43 localhost EXT3 FS on sda4, internal journal
Mar  8 19:21:43 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:21:43 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:21:43 localhost EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
Mar  8 19:21:43 localhost EXT3 FS on sda2, internal journal
Mar  8 19:21:43 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:21:43 localhost NTFS driver 2.1.26 [Flags: R/O MODULE].
Mar  8 19:21:43 localhost NTFS volume version 3.1.
Mar  8 19:21:43 localhost GSI 20 sharing vector 0xD1 and IRQ 20
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 20
Mar  8 19:21:43 localhost 8139too Fast Ethernet driver 0.9.27
Mar  8 19:21:43 localhost GSI 22 sharing vector 0xD9 and IRQ 22
Mar  8 19:21:43 localhost ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 22
Mar  8 19:21:43 localhost eth0: RealTek RTL8139 at 0xffffc20000066000, 00:13:d3:2e:29:c6, IRQ 22
Mar  8 19:21:43 localhost eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Mar  8 19:21:43 localhost eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Mar  8 19:21:44 localhost smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997
Mar  8 19:21:03 localhost sshd[8176]: Server listening on :: port 22.
Mar  8 19:21:03 localhost sshd[8176]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Mar  8 19:21:04 localhost cron[8245]: (CRON) STARTUP (V5.0)
Mar  8 19:21:05 localhost xfs: CONFIG: unknown parameter "cache-hi-mark"
Mar  8 19:21:05 localhost xfs: CONFIG: unknown parameter "cache-low-mark"
Mar  8 19:21:05 localhost xfs: CONFIG: unknown parameter "cache-balance"
Mar  8 19:21:05 localhost xfs[8408]: ignoring font path element /usr/share/fonts/freefont (unreadable)
Mar  8 19:21:05 localhost init: Activating demand-procedures for 'A'
Mar  8 19:21:05 localhost eth0: no IPv6 routers present
Mar  8 19:21:17 localhost gdm(pam_unix)[8608]: session opened for user raph by (uid=0)
Mar  8 19:21:33 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:21:51 localhost su[8700]: + pts/0 raph:root
Mar  8 19:21:51 localhost su(pam_unix)[8700]: session opened for user root by (uid=1000)
Mar  8 19:22:06 localhost i2c /dev entries driver
Mar  8 19:30:01 localhost cron[8716]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 19:31:54 localhost time.c: Lost 13 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:32:11 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:36:58 localhost time.c: Lost 13 timer tick(s)! rip 0x126d462)
Mar  8 19:37:04 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:38:40 localhost time.c: Lost 14 timer tick(s)! rip 0x59da1e)
Mar  8 19:38:54 localhost time.c: Lost 14 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:39:59 localhost time.c: Lost 14 timer tick(s)! rip 0x2aabdb0a0349)
Mar  8 19:40:01 localhost cron[10743]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 19:40:20 localhost time.c: Lost 13 timer tick(s)! rip 0x5b0768)
Mar  8 19:50:01 localhost cron[30445]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 19:51:53 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:52:50 localhost time.c: Lost 14 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:53:16 localhost time.c: Lost 13 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:53:18 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:55:00 localhost su(pam_unix)[8700]: session closed for user root
Mar  8 19:55:00 localhost gdm(pam_unix)[8608]: session closed for user raph
Mar  8 19:55:03 localhost time.c: Lost 13 timer tick(s)! rip 0x2ab812060f3b)
Mar  8 19:55:06 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:55:07 localhost gdm[8606]: Master rebooting...
Mar  8 19:55:07 localhost shutdown[8606]: shutting down for system reboot
Mar  8 19:55:07 localhost init: Switching to runlevel: 6
Mar  8 19:55:09 localhost time.c: Lost 13 timer tick(s)! rip 0x2b664dfe5233)
Mar  8 19:55:09 localhost xfs[8408]: terminating
Mar  8 19:55:09 localhost sshd[8176]: Received signal 15; terminating.
Mar  8 19:55:11 localhost ACPI: PCI interrupt for device 0000:00:14.5 disabled
Mar  8 19:55:11 localhost syslog-ng[7823]: syslog-ng version 1.6.8 going down
Mar  8 19:57:01 localhost syslog-ng[7845]: syslog-ng version 1.6.8 starting
Mar  8 19:57:01 localhost syslog-ng[7845]: Changing permissions on special file /dev/tty12
Mar  8 19:57:01 localhost Bootdata ok (command line is root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev  report_lost_ticks=100)
Mar  8 19:57:01 localhost Linux version 2.6.16-rc5 (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Wed Mar 8 19:45:3
3 GMT 2006
Mar  8 19:57:01 localhost BIOS-provided physical RAM map:
Mar  8 19:57:01 localhost BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar  8 19:57:01 localhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar  8 19:57:01 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  8 19:57:01 localhost BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
Mar  8 19:57:01 localhost BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
Mar  8 19:57:01 localhost BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
Mar  8 19:57:01 localhost BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Mar  8 19:57:01 localhost BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar  8 19:57:01 localhost ACPI: RSDP (v000 RS480                                 ) @ 0x00000000000f8070
Mar  8 19:57:01 localhost ACPI: RSDT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040
Mar  8 19:57:01 localhost ACPI: FADT (v002 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0
Mar  8 19:57:01 localhost ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000003bef69c0
Mar  8 19:57:01 localhost ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000003bef6ac0
Mar  8 19:57:01 localhost ACPI: MCFG (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6bc0
Mar  8 19:57:01 localhost ACPI: MADT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6900
Mar  8 19:57:01 localhost ACPI: DSDT (v001 RS480  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Mar  8 19:57:01 localhost On node 0 totalpages: 240825
Mar  8 19:57:01 localhost DMA zone: 2733 pages, LIFO batch:0
Mar  8 19:57:01 localhost DMA32 zone: 238092 pages, LIFO batch:31
Mar  8 19:57:01 localhost Normal zone: 0 pages, LIFO batch:0
Mar  8 19:57:01 localhost HighMem zone: 0 pages, LIFO batch:0
Mar  8 19:57:01 localhost ATI board detected. Disabling timer routing over 8254.
Mar  8 19:57:01 localhost ACPI: PM-Timer IO Port: 0x4008
Mar  8 19:57:01 localhost ACPI: Local APIC address 0xfee00000
Mar  8 19:57:01 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar  8 19:57:01 localhost Processor #0 15:15 APIC version 16
Mar  8 19:57:01 localhost ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar  8 19:57:01 localhost ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar  8 19:57:01 localhost ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mar  8 19:57:01 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  8 19:57:01 localhost IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Mar  8 19:57:01 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  8 19:57:01 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Mar  8 19:57:01 localhost ACPI: IRQ0 used by override.
Mar  8 19:57:01 localhost ACPI: IRQ2 used by override.
Mar  8 19:57:01 localhost Setting APIC routing to flat
Mar  8 19:57:01 localhost Using ACPI (MADT) for SMP configuration information
Mar  8 19:57:01 localhost Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
Mar  8 19:57:01 localhost Checking aperture...
Mar  8 19:57:01 localhost CPU 0: aperture @ 88000000 size 32 MB
Mar  8 19:57:01 localhost Aperture from northbridge cpu 0 too small (32 MB)
Mar  8 19:57:01 localhost No AGP bridge found
Mar  8 19:57:01 localhost Built 1 zonelists
Mar  8 19:57:01 localhost Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda5 udev  report_lost_ticks=100
Mar  8 19:57:01 localhost Initializing CPU#0
Mar  8 19:57:01 localhost PID hash table entries: 4096 (order: 12, 131072 bytes)
Mar  8 19:57:01 localhost time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
Mar  8 19:57:01 localhost time.c: Detected 1790.861 MHz processor.
Mar  8 19:57:01 localhost Console: colour VGA+ 80x25
Mar  8 19:57:01 localhost Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mar  8 19:57:01 localhost Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar  8 19:57:01 localhost Memory: 959640k/981952k available (3108k kernel code, 21432k reserved, 1109k data, 208k init)
Mar  8 19:57:01 localhost Calibrating delay using timer specific routine.. 3589.01 BogoMIPS (lpj=7178034)
Mar  8 19:57:01 localhost Mount-cache hash table entries: 256
Mar  8 19:57:01 localhost CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 19:57:01 localhost CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 19:57:01 localhost CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Mar  8 19:57:01 localhost time.c: Lost 1 timer tick(s)! rip acpi_os_write_port+0x1a/0x34)
Mar  8 19:57:01 localhost ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Mar  8 19:57:01 localhost failed.
Mar  8 19:57:01 localhost time.c: Lost 9 timer tick(s)! rip __delay+0x8/0x20)
Mar  8 19:57:01 localhost works.
Mar  8 19:57:01 localhost Using local APIC timer interrupts.
Mar  8 19:57:01 localhost result 12436542
Mar  8 19:57:01 localhost Detected 12.436 MHz APIC timer.
Mar  8 19:57:01 localhost time.c: Lost 14 timer tick(s)! rip setup_boot_APIC_clock+0x155/0x160)
Mar  8 19:57:01 localhost testing NMI watchdog ... OK.
Mar  8 19:57:01 localhost checking if image is initramfs... it is
Mar  8 19:57:01 localhost Freeing initrd memory: 1469k freed
Mar  8 19:57:01 localhost DMI 2.4 present.
Mar  8 19:57:01 localhost NET: Registered protocol family 16
Mar  8 19:57:01 localhost ACPI: bus type pci registered
Mar  8 19:57:01 localhost PCI: Using configuration type 1
Mar  8 19:57:01 localhost PCI: Using MMCONFIG at e0000000
Mar  8 19:57:01 localhost ACPI: Subsystem revision 20060127
Mar  8 19:57:01 localhost GSI 21 sharing vector 0xA9 and IRQ 21
Mar  8 19:57:01 localhost ACPI: Interpreter enabled
Mar  8 19:57:01 localhost ACPI: Using IOAPIC for interrupt routing
Mar  8 19:57:01 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  8 19:57:01 localhost PCI: Probing PCI hardware (bus 00)
Mar  8 19:57:01 localhost ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Mar  8 19:57:01 localhost PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Mar  8 19:57:01 localhost Boot video device is 0000:01:05.0
Mar  8 19:57:01 localhost PCI: Transparent bridge - 0000:00:14.4
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11)
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled.
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11)
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Mar  8 19:57:01 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Mar  8 19:57:01 localhost SCSI subsystem initialized
Mar  8 19:57:01 localhost usbcore: registered new driver usbfs
Mar  8 19:57:01 localhost usbcore: registered new driver hub
Mar  8 19:57:01 localhost PCI: Using ACPI for IRQ routing
Mar  8 19:57:01 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  8 19:57:01 localhost PCI: Cannot allocate resource region 3 of device 0000:00:00.0
Mar  8 19:57:01 localhost TC classifier action (bugs to [e-mail] cc [e-mail])
Mar  8 19:57:01 localhost PCI-DMA: Disabling IOMMU.
Mar  8 19:57:01 localhost PCI: Bridge: 0000:00:01.0
Mar  8 19:57:01 localhost IO window: e000-efff
Mar  8 19:57:01 localhost MEM window: fdd00000-fddfffff
Mar  8 19:57:01 localhost PREFETCH window: d8000000-dfffffff
Mar  8 19:57:01 localhost PCI: Bridge: 0000:00:14.4
Mar  8 19:57:01 localhost IO window: d000-dfff
Mar  8 19:57:01 localhost MEM window: fdc00000-fdcfffff
Mar  8 19:57:01 localhost PREFETCH window: fde00000-fdefffff
Mar  8 19:57:01 localhost IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Mar  8 19:57:01 localhost Total HugeTLB memory allocated, 0
Mar  8 19:57:01 localhost JFS: nTxBlock = 7512, nTxLock = 60100
Mar  8 19:57:01 localhost SGI XFS with ACLs, large block/inode numbers, no debug enabled
Mar  8 19:57:01 localhost Initializing Cryptographic API
Mar  8 19:57:01 localhost io scheduler noop registered
Mar  8 19:57:01 localhost io scheduler anticipatory registered (default)
Mar  8 19:57:01 localhost io scheduler deadline registered
Mar  8 19:57:01 localhost io scheduler cfq registered
Mar  8 19:57:01 localhost time.c: Lost 2 timer tick(s)! rip msleep+0x4/0x40)
Mar  8 19:57:01 localhost time.c: Lost 2 timer tick(s)! rip msleep+0x4/0x40)
Mar  8 19:57:01 localhost pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar  8 19:57:01 localhost acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar  8 19:57:01 localhost acpiphp_glue: can't get bus number, assuming 0
Mar  8 19:57:01 localhost ACPI: Power Button (FF) [PWRF]
Mar  8 19:57:01 localhost ACPI: Power Button (CM) [PWRB]
Mar  8 19:57:01 localhost ACPI: Processor [CPU0] (supports 8 throttling states)
Mar  8 19:57:01 localhost Real Time Clock Driver v1.12ac
Mar  8 19:57:01 localhost Non-volatile memory driver v1.2
Mar  8 19:57:01 localhost Linux agpgart interface v0.101 (c) Dave Jones
Mar  8 19:57:01 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  8 19:57:01 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  8 19:57:01 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  8 19:57:01 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  8 19:57:01 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  8 19:57:01 localhost RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Mar  8 19:57:01 localhost loop: loaded (max 8 devices)
Mar  8 19:57:01 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar  8 19:57:01 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar  8 19:57:01 localhost ATIIXP: IDE controller at PCI slot 0000:00:14.1
Mar  8 19:57:01 localhost GSI 16 sharing vector 0xB1 and IRQ 16
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
Mar  8 19:57:01 localhost ATIIXP: chipset revision 0
Mar  8 19:57:01 localhost ATIIXP: not 100% native mode: will probe irqs later
Mar  8 19:57:01 localhost ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio
Mar  8 19:57:01 localhost ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
Mar  8 19:57:01 localhost Probing IDE interface ide0...
Mar  8 19:57:01 localhost hda: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive
Mar  8 19:57:01 localhost ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar  8 19:57:01 localhost Probing IDE interface ide1...
Mar  8 19:57:01 localhost Probing IDE interface ide1...
Mar  8 19:57:01 localhost hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar  8 19:57:01 localhost Uniform CD-ROM driver Revision: 3.20
Mar  8 19:57:01 localhost usbmon: debugfs is not available
Mar  8 19:57:01 localhost mice: PS/2 mouse device common for all mice
Mar  8 19:57:01 localhost md: linear personality registered for level -1
Mar  8 19:57:01 localhost md: raid0 personality registered for level 0
Mar  8 19:57:01 localhost md: raid1 personality registered for level 1
Mar  8 19:57:01 localhost md: raid5 personality registered for level 5
Mar  8 19:57:01 localhost md: raid4 personality registered for level 4
Mar  8 19:57:01 localhost raid5: automatically using best checksumming function: generic_sse
Mar  8 19:57:01 localhost generic_sse:  5474.000 MB/sec
Mar  8 19:57:01 localhost raid5: using function: generic_sse (5474.000 MB/sec)
Mar  8 19:57:01 localhost raid6: int64x1   1666 MB/s
Mar  8 19:57:01 localhost raid6: int64x2   2387 MB/s
Mar  8 19:57:01 localhost raid6: int64x4   2344 MB/s
Mar  8 19:57:01 localhost raid6: int64x8   1598 MB/s
Mar  8 19:57:01 localhost raid6: sse2x1     845 MB/s
Mar  8 19:57:01 localhost raid6: sse2x2    1526 MB/s
Mar  8 19:57:01 localhost raid6: sse2x4    2045 MB/s
Mar  8 19:57:01 localhost raid6: using algorithm sse2x4 (2045 MB/s)
Mar  8 19:57:01 localhost md: raid6 personality registered for level 6
Mar  8 19:57:01 localhost md: multipath personality registered for level -4
Mar  8 19:57:01 localhost md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar  8 19:57:01 localhost md: bitmap version 4.39
Mar  8 19:57:01 localhost device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [e-mail]
Mar  8 19:57:01 localhost NET: Registered protocol family 2
Mar  8 19:57:01 localhost IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar  8 19:57:01 localhost TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar  8 19:57:01 localhost TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar  8 19:57:01 localhost TCP: Hash tables configured (established 131072 bind 65536)
Mar  8 19:57:01 localhost TCP reno registered
Mar  8 19:57:01 localhost TCP bic registered
Mar  8 19:57:01 localhost NET: Registered protocol family 1
Mar  8 19:57:01 localhost NET: Registered protocol family 10
Mar  8 19:57:01 localhost lo: Disabled Privacy Extensions
Mar  8 19:57:01 localhost IPv6 over IPv4 tunneling driver
Mar  8 19:57:01 localhost NET: Registered protocol family 17
Mar  8 19:57:01 localhost NET: Registered protocol family 15
Mar  8 19:57:01 localhost ACPI wakeup devices: 
Mar  8 19:57:01 localhost PCI0 USB0 USB1 USB2 AUDO  P2P  MAC 
Mar  8 19:57:01 localhost ACPI: (supports S0 S1 S3 S5)
Mar  8 19:57:01 localhost BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Mar  8 19:57:01 localhost Freeing unused kernel memory: 208k freed
Mar  8 19:57:01 localhost GSI 17 sharing vector 0xB9 and IRQ 17
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:57:01 localhost ehci_hcd 0000:00:13.2: EHCI Host Controller
Mar  8 19:57:01 localhost ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
Mar  8 19:57:01 localhost ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
Mar  8 19:57:01 localhost ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  8 19:57:01 localhost usb usb1: configuration #1 chosen from 1 choice
Mar  8 19:57:01 localhost hub 1-0:1.0: USB hub found
Mar  8 19:57:01 localhost hub 1-0:1.0: 8 ports detected
Mar  8 19:57:01 localhost input: AT Translated Set 2 keyboard as /class/input/input0
Mar  8 19:57:01 localhost usb 1-7: new high speed USB device using ehci_hcd and address 3
Mar  8 19:57:01 localhost usb 1-7: configuration #1 chosen from 1 choice
Mar  8 19:57:01 localhost usbcore: registered new driver hiddev
Mar  8 19:57:01 localhost usbcore: registered new driver usbhid
Mar  8 19:57:01 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  8 19:57:01 localhost Initializing USB Mass Storage driver...
Mar  8 19:57:01 localhost scsi0 : SCSI emulation for USB Mass Storage devices
Mar  8 19:57:01 localhost usbcore: registered new driver usb-storage
Mar  8 19:57:01 localhost USB Mass Storage support registered.
Mar  8 19:57:01 localhost usb-storage: device found at 3
Mar  8 19:57:01 localhost usb-storage: waiting for device to settle before scanning
Mar  8 19:57:01 localhost USB Universal Host Controller Interface driver v2.3
Mar  8 19:57:01 localhost ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.0: OHCI Host Controller
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.0: irq 17, io mem 0xfe02d000
Mar  8 19:57:01 localhost usb usb2: configuration #1 chosen from 1 choice
Mar  8 19:57:01 localhost hub 2-0:1.0: USB hub found
Mar  8 19:57:01 localhost hub 2-0:1.0: 4 ports detected
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.1: OHCI Host Controller
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
Mar  8 19:57:01 localhost ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02c000
Mar  8 19:57:01 localhost usb usb3: configuration #1 chosen from 1 choice
Mar  8 19:57:01 localhost hub 3-0:1.0: USB hub found
Mar  8 19:57:01 localhost hub 3-0:1.0: 4 ports detected
Mar  8 19:57:01 localhost libata version 1.20 loaded.
Mar  8 19:57:01 localhost sata_sil 0000:00:11.0: version 0.9
Mar  8 19:57:01 localhost GSI 18 sharing vector 0xC1 and IRQ 18
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 18
Mar  8 19:57:01 localhost ata1: SATA max UDMA/100 cmd 0xFFFFC2000002E080 ctl 0xFFFFC2000002E08A bmdma 0xFFFFC2000002E000 irq 18
Mar  8 19:57:01 localhost ata2: SATA max UDMA/100 cmd 0xFFFFC2000002E0C0 ctl 0xFFFFC2000002E0CA bmdma 0xFFFFC2000002E008 irq 18
Mar  8 19:57:01 localhost ata1: SATA link down (SStatus 0)
Mar  8 19:57:01 localhost scsi1 : sata_sil
Mar  8 19:57:01 localhost ata2: SATA link down (SStatus 0)
Mar  8 19:57:01 localhost scsi2 : sata_sil
Mar  8 19:57:01 localhost GSI 19 sharing vector 0xC9 and IRQ 19
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
Mar  8 19:57:01 localhost ata3: SATA max UDMA/100 cmd 0xFFFFC20000030080 ctl 0xFFFFC2000003008A bmdma 0xFFFFC20000030000 irq 19
Mar  8 19:57:01 localhost ata4: SATA max UDMA/100 cmd 0xFFFFC200000300C0 ctl 0xFFFFC200000300CA bmdma 0xFFFFC20000030008 irq 19
Mar  8 19:57:01 localhost ata3: SATA link up 1.5 Gbps (SStatus 113)
Mar  8 19:57:01 localhost usb 3-1: new low speed USB device using ohci_hcd and address 2
Mar  8 19:57:01 localhost ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:40ff
Mar  8 19:57:01 localhost ata3: dev 0 ATA-7, max UDMA7, 390721968 sectors: LBA48
Mar  8 19:57:01 localhost ata3: dev 0 configured for UDMA/100
Mar  8 19:57:01 localhost scsi3 : sata_sil
Mar  8 19:57:01 localhost usb 3-1: configuration #1 chosen from 1 choice
Mar  8 19:57:01 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
Mar  8 19:57:01 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-1
Mar  8 19:57:01 localhost ata4: SATA link down (SStatus 0)
Mar  8 19:57:01 localhost scsi4 : sata_sil
Mar  8 19:57:01 localhost Vendor: ATA       Model: SAMSUNG SP2004C   Rev: VM10
Mar  8 19:57:01 localhost Type:   Direct-Access                      ANSI SCSI revision: 05
Mar  8 19:57:01 localhost SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Mar  8 19:57:01 localhost sda: Write Protect is off
Mar  8 19:57:01 localhost sda: Mode Sense: 00 3a 00 00
Mar  8 19:57:01 localhost SCSI device sda: drive cache: write back
Mar  8 19:57:01 localhost SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Mar  8 19:57:01 localhost sda: Write Protect is off
Mar  8 19:57:01 localhost sda: Mode Sense: 00 3a 00 00
Mar  8 19:57:01 localhost SCSI device sda: drive cache: write back
Mar  8 19:57:01 localhost sda: sda1 sda2 sda3 < sda5 sda6 > sda4
Mar  8 19:57:01 localhost sd 3:0:0:0: Attached scsi disk sda
Mar  8 19:57:01 localhost sd 3:0:0:0: Attached scsi generic sg0 type 0
Mar  8 19:57:01 localhost ReiserFS: sda5: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda5
Mar  8 19:57:01 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:57:01 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:57:01 localhost EXT3 FS on sda5, internal journal
Mar  8 19:57:01 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:57:01 localhost Vendor: USB2.0    Model: CF  CardReader    Rev:     
Mar  8 19:57:01 localhost Type:   Direct-Access                      ANSI SCSI revision: 00
Mar  8 19:57:01 localhost sd 0:0:0:0: Attached scsi removable disk sdb
Mar  8 19:57:01 localhost sd 0:0:0:0: Attached scsi generic sg1 type 0
Mar  8 19:57:01 localhost Vendor: USB2.0    Model: CBO CardReader    Rev:     
Mar  8 19:57:01 localhost Type:   Direct-Access                      ANSI SCSI revision: 00
Mar  8 19:57:01 localhost sd 0:0:0:1: Attached scsi removable disk sdc
Mar  8 19:57:01 localhost sd 0:0:0:1: Attached scsi generic sg2 type 0
Mar  8 19:57:01 localhost usb-storage: device scan complete
Mar  8 19:57:01 localhost Adding 2811332k swap on /dev/sda6.  Priority:-1 extents:1 across:2811332k
Mar  8 19:57:01 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:57:01 localhost EXT3 FS on sda5, internal journal
Mar  8 19:57:01 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:57:01 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar  8 19:57:01 localhost EXT3 FS on sda4, internal journal
Mar  8 19:57:01 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:57:01 localhost kjournald starting.  Commit interval 5 seconds
Mar  8 19:57:01 localhost EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
Mar  8 19:57:01 localhost EXT3 FS on sda2, internal journal
Mar  8 19:57:01 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar  8 19:57:01 localhost NTFS driver 2.1.26 [Flags: R/O MODULE].
Mar  8 19:57:01 localhost NTFS volume version 3.1.
Mar  8 19:57:01 localhost piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Mar  8 19:57:01 localhost GSI 20 sharing vector 0xD1 and IRQ 20
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 20
Mar  8 19:57:01 localhost 8139too Fast Ethernet driver 0.9.27
Mar  8 19:57:01 localhost GSI 22 sharing vector 0xD9 and IRQ 22
Mar  8 19:57:01 localhost ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 22
Mar  8 19:57:01 localhost eth0: RealTek RTL8139 at 0xffffc20000066000, 00:13:d3:2e:29:c6, IRQ 22
Mar  8 19:57:01 localhost eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Mar  8 19:57:01 localhost eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Mar  8 19:57:02 localhost smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997
Mar  8 19:56:21 localhost sshd[8212]: Server listening on :: port 22.
Mar  8 19:56:21 localhost sshd[8212]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Mar  8 19:56:22 localhost cron[8281]: (CRON) STARTUP (V5.0)
Mar  8 19:56:23 localhost xfs: CONFIG: unknown parameter "cache-hi-mark"
Mar  8 19:56:23 localhost xfs: CONFIG: unknown parameter "cache-low-mark"
Mar  8 19:56:23 localhost xfs: CONFIG: unknown parameter "cache-balance"
Mar  8 19:56:23 localhost xfs[8444]: ignoring font path element /usr/share/fonts/freefont (unreadable)
Mar  8 19:56:23 localhost init: Activating demand-procedures for 'A'
Mar  8 19:56:24 localhost eth0: no IPv6 routers present
Mar  8 19:56:40 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:57:10 localhost gdm(pam_unix)[8644]: session opened for user raph by (uid=0)
Mar  8 19:57:18 localhost su[8732]: + pts/0 raph:root
Mar  8 19:57:18 localhost su(pam_unix)[8732]: session opened for user root by (uid=1000)
Mar  8 19:57:56 localhost i2c /dev entries driver
Mar  8 19:59:13 localhost time.c: Lost 14 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 19:59:21 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:00:01 localhost cron[8797]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 20:00:01 localhost cron[8798]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
Mar  8 20:00:38 localhost APIC error on CPU0: 04(40)
Mar  8 20:00:38 localhost time.c: Lost 1 timer tick(s)! rip 0x1269632)
Mar  8 20:01:27 localhost rc-scripts: WARNING:  you are stopping a boot service.
Mar  8 20:01:27 localhost ACPI: PCI interrupt for device 0000:00:14.5 disabled
Mar  8 20:01:27 localhost rc-scripts: ERROR: wrong args ( unload )
Mar  8 20:01:27 localhost rc-scripts: Usage: alsasound { start|stop|restart|save|restore }
Mar  8 20:01:27 localhost rc-scripts:        alsasound without arguments for full help
Mar  8 20:01:29 localhost time.c: Lost 13 timer tick(s)! rip clear_page+0x7/0x39)
Mar  8 20:01:34 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:01:48 localhost ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 20
Mar  8 20:02:32 localhost i2c_adapter i2c-0: found SMSC47M192 or SMSC47M997, version 2, stepping A0
Mar  8 20:06:06 localhost time.c: Lost 13 timer tick(s)! rip 0xa6f520)
Mar  8 20:06:08 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:06:30 localhost su(pam_unix)[8732]: session closed for user root
Mar  8 20:07:11 localhost time.c: Lost 13 timer tick(s)! rip 0xb47146)
Mar  8 20:07:13 localhost APIC error on CPU0: 40(40)
Mar  8 20:07:13 localhost time.c: Lost 1 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:07:16 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:08:37 localhost time.c: Lost 14 timer tick(s)! rip 0x2ba1792e7376)
Mar  8 20:08:51 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:10:01 localhost cron[11094]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 20:11:29 localhost su[11113]: + pts/2 raph:root
Mar  8 20:11:29 localhost su(pam_unix)[11113]: session opened for user root by (uid=1000)
Mar  8 20:18:05 localhost su[11301]: + pts/4 raph:root
Mar  8 20:18:05 localhost su(pam_unix)[11301]: session opened for user root by (uid=1000)
Mar  8 20:19:03 localhost time.c: Lost 13 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:19:05 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:19:08 localhost time.c: Lost 13 timer tick(s)! rip 0x2b1a1e170764)
Mar  8 20:19:37 localhost time.c: Lost 13 timer tick(s)! rip 0x58e683)
Mar  8 20:20:01 localhost cron[13813]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Mar  8 20:23:17 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:23:23 localhost APIC error on CPU0: 40(40)
Mar  8 20:23:23 localhost time.c: Lost 1 timer tick(s)! rip default_idle+0x2a/0x60)
Mar  8 20:23:50 localhost time.c: Lost 15 timer tick(s)! rip default_idle+0x2a/0x60)