* Package:    dev-db/redis-7.0.4
 * Repository: gentoo
 * Maintainer: arkamar@atlas.cz sam@gentoo.org,proxy-maint@gentoo.org
 * USE:        abi_x86_64 amd64 elibc_glibc jemalloc kernel_linux ssl test userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox test userpriv usersandbox

>>> Unpacking source...
>>> Unpacking redis-7.0.4.tar.gz to /var/tmp/portage/dev-db/redis-7.0.4/work
>>> Source unpacked in /var/tmp/portage/dev-db/redis-7.0.4/work
>>> Preparing source in /var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4 ...
 * Applying redis-6.2.1-config.patch ...
 [ ok ]
 * Applying redis-5.0-shared.patch ...
patching file src/Makefile
Hunk #1 succeeded at 56 with fuzz 1 (offset 27 lines).
Hunk #2 succeeded at 255 with fuzz 1 (offset 142 lines).
 [ ok ]
 * Applying redis-6.2.3-ppc-atomic.patch ...
patching file src/Makefile
Hunk #1 succeeded at 113 with fuzz 1 (offset 26 lines).
 [ ok ]
 * Applying redis-sentinel-5.0-config.patch ...
 [ ok ]
 * Applying redis-7.0.4-no-which.patch ...
 [ ok ]
 * SED: the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(CC):@CC@:g
 * no-op: -e s:$(CFLAGS):@AM_CFLAGS@:g
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(CC):@CC@:g
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(CC):@CC@:g
 * no-op: -e s:$(CFLAGS):@AM_CFLAGS@:g
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * SED: some expressions in the following did not cause any changes
 *         sed -i -e 's:$(CC):@CC@:g' -e 's:$(CFLAGS):@AM_CFLAGS@:g' -e 's: $(DEBUG)::g' -e 's:$(OBJARCH)::g' -e 's:ARCH:TARCH:g' -e '/^CCOPT=/s:$: $(LDFLAGS):g' "${MKF}.in" || die "Sed failed for ${MKF}";
 * no-op: -e s: $(DEBUG)::g
 * no-op: -e s:$(OBJARCH)::g
 * no-op: -e s:ARCH:TARCH:g
 * no-op: -e /^CCOPT=/s:$: $(LDFLAGS):g
 * Running eautoreconf in '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4' ...
 * Running 'aclocal --system-acdir=/var/tmp/portage/dev-db/redis-7.0.4/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running elibtoolize in: redis-7.0.4/
 * Running elibtoolize in: redis-7.0.4/deps/jemalloc/
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4 ...
 * econf: updating redis-7.0.4/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating redis-7.0.4/deps/jemalloc/build-aux/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating redis-7.0.4/deps/jemalloc/build-aux/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating redis-7.0.4/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --datarootdir=/usr/share --docdir=/usr/share/doc/redis-7.0.4 --htmldir=/usr/share/doc/redis-7.0.4/html --libdir=/usr/lib64
checking whether to build with debug information... no
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to enable C11 features... none needed
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for vfork.h... no
checking for arpa/inet.h... yes
checking for fcntl.h... yes
checking for inttypes.h... (cached) yes
checking for limits.h... yes
checking for netdb.h... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for sys/socket.h... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for _Bool... yes
checking for stdbool.h that conforms to C99... yes
checking for inline... inline
checking for int16_t... yes
checking for int32_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for error_at_line... yes
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for working strcoll... yes
checking for working strtod... yes
checking for dup2... yes
checking for gethostbyname... yes
checking for gettimeofday... yes
checking for inet_ntoa... yes
checking for memchr... yes
checking for memmove... yes
checking for memset... yes
checking for select... yes
checking for socket... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strerror... yes
checking for strstr... yes
checking for strtol... yes
configure: creating ./config.status
config.status: creating deps/lua/Makefile
config.status: creating deps/lua/etc/Makefile
config.status: creating deps/lua/src/Makefile
config.status: creating deps/hdr_histogram/Makefile
config.status: creating deps/Makefile
config.status: creating deps/hiredis/Makefile
config.status: creating deps/linenoise/Makefile
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/modules/Makefile
config.status: creating tests/modules/Makefile
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4 ...
make -j32 V=1 MALLOC=jemalloc BUILD_TLS=yes AR=x86_64-pc-linux-gnu-ar CC=x86_64-pc-linux-gnu-gcc RANLIB=x86_64-pc-linux-gnu-ranlib 
cd src && make all
make[1]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/src'
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MM acl.c adlist.c ae.c anet.c aof.c bio.c bitops.c blocked.c call_reply.c childinfo.c cli_common.c cluster.c commands.c config.c connection.c crc16.c crc64.c crcspeed.c db.c debug.c defrag.c dict.c endianconv.c eval.c evict.c expire.c function_lua.c functions.c geo.c geohash.c geohash_helper.c hyperloglog.c intset.c latency.c lazyfree.c listpack.c localtime.c lolwut.c lolwut5.c lolwut6.c lzf_c.c lzf_d.c memtest.c module.c monotonic.c mt19937-64.c multi.c networking.c notify.c object.c pqsort.c pubsub.c quicklist.c rand.c rax.c rdb.c redis-benchmark.c redis-check-aof.c redis-check-rdb.c redis-cli.c redisassert.c release.c replication.c resp_parser.c rio.c script.c script_lua.c sds.c sentinel.c server.c setcpuaffinity.c setproctitle.c sha1.c sha256.c siphash.c slowlog.c sort.c sparkline.c syncio.c syscheck.c t_hash.c t_list.c t_set.c t_stream.c t_string.c t_zset.c timeout.c tls.c tracking.c util.c ziplist.c zipmap.c zmalloc.c > Makefile.dep 2> /dev/null || true
rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep
rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d connection.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d
(cd ../deps && make distclean)
make[2]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(cd hdr_histogram && make clean) > /dev/null || true
(rm -f .make-*)
make[2]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps'
(cd modules && make clean)
make[2]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/src/modules'
rm -rf *.xo *.so
make[2]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/src/modules'
(cd ../tests/modules && make clean)
make[2]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/tests/modules'
rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo
make[2]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/tests/modules'
(rm -f .make-*)
echo STD=-pedantic -DREDIS_STATIC='' -std=c11 >> .make-settings
echo WARN=-Wall -W -Wno-missing-field-initializers >> .make-settings
echo OPT=-O2 >> .make-settings
echo MALLOC=jemalloc >> .make-settings
echo BUILD_TLS=yes >> .make-settings
echo USE_SYSTEMD=no >> .make-settings
echo CFLAGS=-std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL >> .make-settings
echo LDFLAGS=-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 >> .make-settings
echo REDIS_CFLAGS= >> .make-settings
echo REDIS_LDFLAGS= >> .make-settings
echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  >> .make-settings
echo PREV_FINAL_LDFLAGS=-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0  -rdynamic  >> .make-settings
(cd ../deps && make hiredis linenoise lua hdr_histogram)
make[2]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps'
(cd hiredis && make clean) > /dev/null || true
(cd linenoise && make clean) > /dev/null || true
(cd lua && make clean) > /dev/null || true
(cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true
(cd hdr_histogram && make clean) > /dev/null || true
(rm -f .make-*)
(echo " -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL" > .make-cflags)
(echo "-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0" > .make-ldflags)
MAKE hiredis
cd hiredis && make static USE_SSL=1
MAKE linenoise
MAKE lua
cd linenoise && make
cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2 " MYLDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0" AR="x86_64-pc-linux-gnu-ar rc"
MAKE hdr_histogram
cd hdr_histogram && make
make[3]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/hiredis'
make[3]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/linenoise'
x86_64-pc-linux-gnu-gcc  -Wall -Os  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -c linenoise.c
make[3]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/hdr_histogram'
x86_64-pc-linux-gnu-gcc -std=c99 -Wall -Os -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c  hdr_histogram.c 
make[3]: Entering directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/lua/src'
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lapi.o lapi.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lcode.o lcode.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ldebug.o ldebug.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ldo.o ldo.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ldump.o ldump.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lfunc.o lfunc.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lgc.o lgc.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o llex.o llex.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lmem.o lmem.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lobject.o lobject.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lopcodes.o lopcodes.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lparser.o lparser.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lstate.o lstate.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lstring.o lstring.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ltable.o ltable.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ltm.o ltm.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lundump.o lundump.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lvm.o lvm.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lzio.o lzio.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o strbuf.o strbuf.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o fpconv.o fpconv.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lauxlib.o lauxlib.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lbaselib.o lbaselib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ldblib.o ldblib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o liolib.o liolib.c
llex.c: In function 'llex':
llex.c:369:14: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  369 |         else luaX_lexerror(ls, "invalid long string delimiter", TK_STRING);
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
llex.c:371:7: note: here
  371 |       case '=': {
      |       ^~~~
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c
ldebug.c: In function 'symbexec':
ldebug.c:267:36: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  267 | #define check(x)                if (!(x)) return 0;
      |                                    ^
ldebug.c:271:33: note: in expansion of macro 'check'
  271 | #define checkreg(pt,reg)        check((reg) < (pt)->maxstacksize)
      |                                 ^~~~~
ldebug.c:413:9: note: in expansion of macro 'checkreg'
  413 |         checkreg(pt, a+3);
      |         ^~~~~~~~
ldebug.c:415:7: note: here
  415 |       case OP_JMP: {
      |       ^~~~
ltable.c: In function 'luaH_get':
ltable.c:474:23: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  474 |     case LUA_TNUMBER: {
      |                       ^
ltable.c:482:5: note: here
  482 |     default: {
      |     ^~~~~~~
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lmathlib.o lmathlib.c
x86_64-pc-linux-gnu-gcc -std=c99 -c -O3 -fPIC  -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -Wall -W -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o loslib.o loslib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o ltablib.o ltablib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lstrlib.o lstrlib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o loadlib.o loadlib.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o linit.o linit.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lua_cjson.o lua_cjson.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lua_struct.o lua_struct.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lua_cmsgpack.o lua_cmsgpack.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lua_bit.o lua_bit.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o lua.o lua.c
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o luac.o luac.c
lua_cjson.c: In function 'json_append_string':
lua_cjson.c:479:19: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wsign-compare]]
  479 |     for (i = 0; i < len; i++) {
      |                   ^
lua_cjson.c: In function 'json_append_data':
lua_cjson.c:691:12: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  691 |         if (lua_touserdata(l, -1) == NULL) {
      |            ^
lua_cjson.c:695:5: note: here
  695 |     default:
      |     ^~~~~~~
x86_64-pc-linux-gnu-gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP  -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL -O2    -c -o print.o print.c
lua.c: In function 'collectargs':
lua.c:274:13: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  274 |         *pi = 1;  /* go through */
      |         ~~~~^~~
lua.c:275:7: note: here
  275 |       case 'v':
      |       ^~~~
lua.c:280:13: warning: this statement may fall through [-Wimplicit-fallthrough=[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wimplicit-fallthrough=]]
  280 |         *pe = 1;  /* go through */
      |         ~~~~^~~
lua.c:281:7: note: here
  281 |       case 'l':
      |       ^~~~
lua_cmsgpack.c: In function 'mp_unpack_full':
lua_cmsgpack.c:807:21: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wsign-compare]]
  807 |     else if (offset > len)
      |                     ^
lua_cmsgpack.c: In function 'luaopen_create':
lua_cmsgpack.c:907:19: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wsign-compare]]
  907 |     for (i = 0; i < (sizeof(cmds)/sizeof(*cmds) - 1); i++) {
      |                   ^
lua_cmsgpack.c: In function 'luaopen_cmsgpack_safe':
lua_cmsgpack.c:942:19: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wsign-compare]]
  942 |     for (i = 0; i < (sizeof(cmds)/sizeof(*cmds) - 1); i++) {
      |                   ^
x86_64-pc-linux-gnu-ar rcs libhiredis_ssl.a ssl.o
x86_64-pc-linux-gnu-ar rcs libhdrhistogram.a hdr_histogram.o
make[3]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/hdr_histogram'
make[3]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/linenoise'
x86_64-pc-linux-gnu-ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o	# DLL needs all object files
x86_64-pc-linux-gnu-ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o
make[3]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/hiredis'
x86_64-pc-linux-gnu-ranlib liblua.a
x86_64-pc-linux-gnu-gcc -o lua -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 lua.o liblua.a -lm 
x86_64-pc-linux-gnu-gcc -o luac -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 luac.o print.o liblua.a -lm 
make[3]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps/lua/src'
make[2]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/deps'
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o adlist.o -c adlist.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o quicklist.o -c quicklist.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o ae.o -c ae.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o anet.o -c anet.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o dict.o -c dict.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o server.o -c server.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sds.o -c sds.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o zmalloc.o -c zmalloc.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lzf_c.o -c lzf_c.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lzf_d.o -c lzf_d.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o pqsort.o -c pqsort.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o zipmap.o -c zipmap.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sha1.o -c sha1.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o ziplist.o -c ziplist.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o release.o -c release.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o networking.o -c networking.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o util.o -c util.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o object.o -c object.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o db.o -c db.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o replication.o -c replication.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o rdb.o -c rdb.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_string.o -c t_string.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_list.o -c t_list.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_set.o -c t_set.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_zset.o -c t_zset.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_hash.o -c t_hash.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o config.o -c config.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o aof.o -c aof.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o pubsub.o -c pubsub.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o multi.o -c multi.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o debug.o -c debug.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sort.o -c sort.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o intset.o -c intset.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o syncio.o -c syncio.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o cluster.o -c cluster.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o crc16.o -c crc16.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o endianconv.o -c endianconv.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o slowlog.o -c slowlog.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o eval.o -c eval.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o bio.o -c bio.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o rio.o -c rio.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o rand.o -c rand.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o memtest.o -c memtest.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o syscheck.o -c syscheck.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o crcspeed.o -c crcspeed.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o crc64.o -c crc64.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o bitops.o -c bitops.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sentinel.o -c sentinel.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o notify.o -c notify.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o setproctitle.o -c setproctitle.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o blocked.o -c blocked.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o hyperloglog.o -c hyperloglog.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o latency.o -c latency.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sparkline.o -c sparkline.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o redis-check-rdb.o -c redis-check-rdb.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o redis-check-aof.o -c redis-check-aof.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o geo.o -c geo.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lazyfree.o -c lazyfree.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o module.o -c module.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o evict.o -c evict.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o expire.o -c expire.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o geohash.o -c geohash.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o geohash_helper.o -c geohash_helper.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o childinfo.o -c childinfo.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o defrag.o -c defrag.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o siphash.o -c siphash.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o rax.o -c rax.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o t_stream.o -c t_stream.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o listpack.o -c listpack.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o localtime.o -c localtime.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lolwut.o -c lolwut.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lolwut5.o -c lolwut5.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o lolwut6.o -c lolwut6.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o acl.o -c acl.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o tracking.o -c tracking.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o connection.o -c connection.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o tls.o -c tls.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o sha256.o -c sha256.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o timeout.o -c timeout.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o setcpuaffinity.o -c setcpuaffinity.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o monotonic.o -c monotonic.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o mt19937-64.o -c mt19937-64.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o resp_parser.o -c resp_parser.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o call_reply.o -c call_reply.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o script_lua.o -c script_lua.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o script.o -c script.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o functions.o -c functions.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o function_lua.o -c function_lua.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o commands.o -c commands.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o redis-cli.o -c redis-cli.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o redisassert.o -c redisassert.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o cli_common.o -c cli_common.c
x86_64-pc-linux-gnu-gcc -pedantic -DREDIS_STATIC='' -std=c11 -Wall -W -Wno-missing-field-initializers -O2 -std=c99 -pedantic -Wall -W -D__EXTENSIONS__ -D_XPG6 -march=native -O2 -pipe -frecord-gcc-switches -DENABLE_CJSON_GLOBAL  -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -DUSE_JEMALLOC -DJEMALLOC_NO_DEMANGLE -DUSE_OPENSSL  -MMD -o redis-benchmark.o -c redis-benchmark.c
x86_64-pc-linux-gnu-gcc -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0  -rdynamic  -o redis-benchmark ae.o anet.o redis-benchmark.o adlist.o dict.o zmalloc.o redisassert.o release.o crcspeed.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o ../deps/hiredis/libhiredis.a ../deps/hdr_histogram/libhdrhistogram.a -lm -ldl -pthread -lrt -ljemalloc -ldl ../deps/hiredis/libhiredis_ssl.a -lssl  -lcrypto 
x86_64-pc-linux-gnu-gcc -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0  -rdynamic  -o redis-server adlist.o quicklist.o ae.o anet.o dict.o server.o sds.o zmalloc.o lzf_c.o lzf_d.o pqsort.o zipmap.o sha1.o ziplist.o release.o networking.o util.o object.o db.o replication.o rdb.o t_string.o t_list.o t_set.o t_zset.o t_hash.o config.o aof.o pubsub.o multi.o debug.o sort.o intset.o syncio.o cluster.o crc16.o endianconv.o slowlog.o eval.o bio.o rio.o rand.o memtest.o syscheck.o crcspeed.o crc64.o bitops.o sentinel.o notify.o setproctitle.o blocked.o hyperloglog.o latency.o sparkline.o redis-check-rdb.o redis-check-aof.o geo.o lazyfree.o module.o evict.o expire.o geohash.o geohash_helper.o childinfo.o defrag.o siphash.o rax.o t_stream.o listpack.o localtime.o lolwut.o lolwut5.o lolwut6.o acl.o tracking.o connection.o tls.o sha256.o timeout.o setcpuaffinity.o monotonic.o mt19937-64.o resp_parser.o call_reply.o script_lua.o script.o functions.o function_lua.o commands.o ../deps/hiredis/libhiredis.a ../deps/lua/src/liblua.a ../deps/hdr_histogram/libhdrhistogram.a -lm -ldl -pthread -lrt -ljemalloc -ldl ../deps/hiredis/libhiredis_ssl.a -lssl  -lcrypto 
install redis-server redis-sentinel
install redis-server redis-check-rdb
install redis-server redis-check-aof
x86_64-pc-linux-gnu-gcc -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0  -rdynamic  -o redis-cli anet.o adlist.o dict.o redis-cli.o zmalloc.o release.o ae.o redisassert.o crcspeed.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o ../deps/hiredis/libhiredis.a ../deps/linenoise/linenoise.o -lm -ldl -pthread -lrt -ljemalloc -ldl ../deps/hiredis/libhiredis_ssl.a -lssl  -lcrypto 

Hint: It's a good idea to run 'make test' ;)

make[1]: Leaving directory '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4/src'
>>> Source compiled.
>>> Test phase: dev-db/redis-7.0.4
 * oom-score-adj related tests will be skipped. They are known to fail with FEATURES usersandbox or -userpriv. See bug #756382.
 * ./utils/gen-test-certs.sh
Generating RSA private key, 4096 bit long modulus (2 primes)
..............................................................................++++
..........................................................................................++++
e is 65537 (0x010001)
Generating RSA private key, 2048 bit long modulus (2 primes)
....................................+++++
.............................+++++
e is 65537 (0x010001)
Signature ok
subject=O = Redis Test, CN = Server-only
Getting CA Private Key
Generating RSA private key, 2048 bit long modulus (2 primes)
......................................................................................+++++
.................................................+++++
e is 65537 (0x010001)
Signature ok
subject=O = Redis Test, CN = Client-only
Getting CA Private Key
Generating RSA private key, 2048 bit long modulus (2 primes)
.........................................+++++
.....................................................................................................................................+++++
e is 65537 (0x010001)
Signature ok
subject=O = Redis Test, CN = Generic-cert
Getting CA Private Key
Generating DH parameters, 2048 bit long safe prime, generator 2
This is going to take a long time
.....................................+.............................................+.......................................+.........................................................................................................................+.....................................................................................................................................+..............................................................................+.+................................................................................+..................................+..........+....................................................................................+......................................................................................................................................................+.........................+..................................................+...............................................+......................+..............................+....................................................................+.....................................................................................................................................................................................................................................+...............................................................................................................................................................................................+.......................................................................................................+...............................+.....................................................................................................................+.......................................................................................................................................................................................................................................+.........................................................+......................................................................................................................................................................+...........................................................+.............................................................................+..............................................................................................................................................................................................................................+...................................................................................+..........................+...............................................................................................+....+...............................................................................+.+...................................................................................................................................................................................+.............................................................................+.................................................+................................+...........................+....+....................................................................+...................................................................+..................................................................................................+..............+................+.......................................................................................................................+................................................................+............................................................+................................................................................................................+..............+..................................................................................................................................................................................................+.............+.....................................................................................................................................................................................................................................................................................................................+.........................................+...........................................................................+.......................................................................................................+..........................+....+.................................................................................................................................................................................................................................................................+.......................................................+...........................................................................................................+.......+........................................................................................................................+...............................................................................................+..................................................+...............................................................................................................................................+..+.+......................................................................................................................................................+......................................................................................................................................................................................................................................................................................................+...+............................+..+...........................+...............................................+.............+........+.........................................................................................+.............................+............................................................................................................................................................................+.....................................................................................................+.............................................................................................+.............................................................................................................................+........................................................................................................................................................................................................................................................+...........................................................................................................................................................................................+..............................................................+...................................................................................................................................................+................................................................+...........................................................+...........+......................+..............................................................................................................+.......................+.................................................+....................................................+..................................................+...............................................+...................................................................................................+.................+........................................................................................................................................................................................+.................................................................................................................................+.+.....................................................................................................+...............................................+..............+.......................................+..........+........................................................................+............................................................+....................................................................+.................................................+..................................................+..............................+....................................................+..+...........................................................++*++*++*++*
 * ./runtest --clients 32 --skiptest Active defrag eval scripts --skipunit unit/oom-score-adj --skiptest CONFIG SET rollback on apply error --tls
Cleanup: may take some time... OK
Starting test server at port 21079
[ready]: 70
Testing unit/printver
[ready]: 69
Testing unit/dump
[ready]: 72
Testing unit/auth
[ready]: 71
Testing unit/protocol
[ready]: 73
Testing unit/keyspace
[ready]: 74
Testing unit/scan
[ready]: 75
Testing unit/info
[ready]: 76
Testing unit/info-command
[ready]: 77
Testing unit/type/string
[ready]: 78
Testing unit/type/incr
[ready]: 79
Testing unit/type/list
[ready]: 80
Testing unit/type/list-2
[ready]: 81
Testing unit/type/list-3
[ready]: 82
Testing unit/type/set
[ready]: 83
Testing unit/type/zset
[ready]: 84
Testing unit/type/hash
[ready]: 86
Testing unit/type/stream
[ready]: 87
Testing unit/type/stream-cgroups
[ready]: 88
Testing unit/sort
[ready]: 85
Testing unit/expire
[ready]: 89
Testing unit/other
[ready]: 91
Testing unit/multi
[ready]: 92
Testing unit/quit
[ready]: 93
Testing unit/aofrw
[ready]: 90
Testing unit/acl
[ready]: 94
Testing unit/acl-v2
[ready]: 95
Testing unit/latency-monitor
[ready]: 98
Testing integration/block-repl
[ready]: 97
Testing integration/replication
[ready]: 99
Testing integration/replication-2
[ready]: 96
Testing integration/replication-3
[ready]: 100
Testing integration/replication-4
[ok]: SCAN basic (27 ms)
[ok]: SCAN COUNT (40 ms)
[ok]: SCAN MATCH (25 ms)
Testing Redis version 7.0.4 (00000000)
[ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms)
[ok]: INCR against non existing key (0 ms)
[ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms)
[ok]: INCR against key created by incr itself (1 ms)
[ok]: INCR against key originally set with SET (0 ms)
[ok]: INCR over 32bit value (0 ms)
[ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms)
[ok]: INCRBY over 32bit value with over 32bit increment (0 ms)
[ok]: INCR fails against key with spaces (left) (1 ms)
[ok]: RESTORE can set an absolute expire (1 ms)
[ok]: INCR fails against key with spaces (right) (0 ms)
[ok]: INCR fails against key with spaces (both) (0 ms)
[ok]: RESTORE with ABSTTL in the past (0 ms)
[ok]: DECRBY negation overflow (1 ms)
[ok]: info command with at most one sub command (1 ms)
[ok]: INCR fails against a key holding a list (0 ms)
[ok]: RESTORE can set LRU (1 ms)
[ok]: info command with one sub-section (0 ms)
[ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms)
[ok]: info command with multiple sub-sections (1 ms)
[ok]: SET and GET an item (0 ms)
[ok]: INCR uses shared objects in the 0-9999 range (1 ms)
[ok]: RESTORE can set LFU (1 ms)
[ok]: SET and GET an empty item (0 ms)
[ok]: RESTORE returns an error of the key already exists (0 ms)
[ok]: INCR can modify objects in-place (1 ms)
[ok]: RESTORE can overwrite an existing key with REPLACE (1 ms)
[ok]: INCRBYFLOAT against non existing key (0 ms)
[ok]: RESTORE can detect a syntax error for unrecongized options (0 ms)
[ok]: INCRBYFLOAT against key originally set with SET (0 ms)
[ok]: DUMP of non existing key returns nil (1 ms)
[ok]: INCRBYFLOAT over 32bit value (0 ms)
[ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms)
[ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms)
[ok]: Handle an empty query (8 ms)
[ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms)
[ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms)
[ok]: XADD wrong number of args (1 ms)
[ok]: reg node check compression with insert and pop (2 ms)
[ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms)
[ok]: INCRBYFLOAT fails against a key holding a list (1 ms)
[ok]: reg node check compression combined with trim (1 ms)
[ok]: HSET/HLEN - Small hash creation (1 ms)
[ok]: Check encoding - listpack (0 ms)
[ok]: reg node check compression with lset (0 ms)
[ok]: XADD IDs are incremental (0 ms)
[ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms)
[ok]: MULTI / EXEC basics (1 ms)
[ok]: Is the small hash encoded with a listpack? (0 ms)
[ok]: DISCARD (0 ms)
[ok]: ZSET basic ZADD and score update - listpack (1 ms)
[ok]: XADD IDs are incremental when ms is the same as well (1 ms)
[ok]: INCRBYFLOAT decrement (1 ms)
[ok]: AUTH fails if there is no password configured server side (0 ms)
[ok]: Nested MULTI are not allowed (1 ms)
[ok]: plain node check compression (2 ms)
[ok]: XADD IDs correctly report an error when overflowing (0 ms)
[ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms)
[ok]: Old Ziplist: SORT BY key (0 ms)
[ok]: plain node check compression with ltrim (1 ms)
[ok]: string to double with null terminator (0 ms)
[ok]: XADD auto-generated sequence is incremented for last ID (0 ms)
[ok]: MULTI where commands alter argc/argv (0 ms)
[ok]: Arity check for auth command (0 ms)
[ok]: Explicit regression for a list bug (1 ms)
[ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms)
[ok]: EXPIRE - set timeouts multiple times (1 ms)
[ok]: Negative multibulk length (4 ms)
[ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms)
[ok]: No negative zero (1 ms)
[ok]: Old Ziplist: SORT BY key with limit (0 ms)
[ok]: WATCH inside MULTI is not allowed (1 ms)
[ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms)
[ok]: LATENCY HISTOGRAM with empty histogram (1 ms)
[ok]: plain node check compression using lset (0 ms)
[ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - regular set (2 ms)
[ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms)
[ok]: EXPIRE - It should be still possible to read 'x' (0 ms)
[ok]: Connections start with the default user (0 ms)
[ok]: LATENCY HISTOGRAM all commands (0 ms)
[ok]: Old Ziplist: SORT BY hash field (1 ms)
[ok]: EXEC fails if there are errors while queueing commands #1 (1 ms)
[ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms)
[ok]: ZADD with options syntax error with incomplete pair - listpack (1 ms)
[ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (1 ms)
[ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms)
[ok]: XADD auto-generated sequence can't overflow (1 ms)
[ok]: It is possible to create new users (0 ms)
[ok]: SMISMEMBER against non set (0 ms)
[ok]: ZADD XX option without key - listpack (0 ms)
[ok]: LATENCY HISTOGRAM sub commands (1 ms)
[ok]: XREADGROUP will return only new elements (0 ms)
[ok]: Usernames can not contain spaces or null characters (0 ms)
[ok]: ZADD XX existing key - listpack (0 ms)
[ok]: XADD 0-* should succeed (0 ms)
[ok]: SMISMEMBER non existing key (0 ms)
[ok]: ZADD XX returns the number of elements actually added - listpack (1 ms)
[ok]: XREADGROUP can read the history of the elements we own (1 ms)
[ok]: New users start disabled (0 ms)
[ok]: SMISMEMBER requires one or more members (1 ms)
[ok]: XPENDING is able to return pending items (0 ms)
[ok]: SADD against non set (0 ms)
[ok]: LATENCY HISTOGRAM with a subset of commands (1 ms)
[ok]: ZADD XX updates existing elements score - listpack (0 ms)
[ok]: Enabling the user allows the login (0 ms)
[ok]: LATENCY HISTOGRAM command (1 ms)
[ok]: SADD a non-integer against an intset (1 ms)
[ok]: XPENDING can return single consumer items (1 ms)
[ok]: Only the set of correct passwords work (0 ms)
[ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms)
[ok]: XPENDING only group (0 ms)
[ok]: SADD an integer larger than 64 bits (0 ms)
[ok]: It is possible to remove passwords from the set of valid ones (1 ms)
[ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms)
[ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms)
[ok]: Test password hashes can be added (0 ms)
[ok]: Test password hashes validate input (0 ms)
[ok]: ACL GETUSER returns the password hash instead of the actual password (1 ms)
[ok]: Test basic multiple selectors (1 ms)
[ok]: Test hashed passwords removal (0 ms)
[ok]: By default users are not able to access any command (1 ms)
[ok]: By default users are not able to access any key (0 ms)
[ok]: It's possible to allow the access of a subset of keys (0 ms)
[ok]: Out of range multibulk length (6 ms)
[ok]: Test ACL selectors by default have no permissions (1 ms)
[ok]: By default, only default user is able to publish to any channel (1 ms)
[ok]: By default, only default user is not able to publish to any shard channel (0 ms)
[ok]: Test deleting selectors (1 ms)
[ok]: DEL against a single item (1 ms)
[ok]: EXEC fails if there are errors while queueing commands #2 (6 ms)
[ok]: HRANDFIELD - listpack (8 ms)
[ok]: QUIT returns OK (4 ms)
[ok]: If EXEC aborts, the client MULTI state is cleared (0 ms)
[ok]: Test selector syntax error reports the error in the selector context (0 ms)
[ok]: Vararg DEL (0 ms)
[ok]: EXEC works on WATCHed key not modified (0 ms)
[ok]: Untagged multi-key commands (1 ms)
[ok]: KEYS with pattern (0 ms)
[ok]: KEYS to get all keys (1 ms)
[ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms)
[ok]: DBSIZE (0 ms)
[ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms)
[ok]: DEL all keys (1 ms)
[ok]: Wrong multibulk payload header (4 ms)
[ok]: Test flexible selector definition (3 ms)
[ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms)
[ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms)
[ok]: Test separate read permission (0 ms)
[ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms)
[ok]: ZADD XX and NX are not compatible - listpack (0 ms)
[ok]: ZADD NX with non existing key - listpack (1 ms)
[ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms)
[ok]: ZADD GT and NX are not compatible - listpack (0 ms)
[ok]: Test separate write permission (0 ms)
[ok]: ZADD LT and NX are not compatible - listpack (0 ms)
[ok]: ZADD LT and GT are not compatible - listpack (0 ms)
[ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms)
[ok]: ZADD INCR LT/GT with inf - listpack (2 ms)
[ok]: ZADD INCR works like ZINCRBY - listpack (0 ms)
[ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms)
[ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms)
[ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms)
[ok]: ZADD - Variadic version base case - $encoding (0 ms)
[ok]: By default, only default user is able to subscribe to any channel (5 ms)
[ok]: Test separate read and write permissions (1 ms)
[ok]: ZADD - Return value is the number of actually added items - $encoding (1 ms)
[ok]: ZADD - Variadic version does not add nothing on single parsing err - $encoding (0 ms)
[ok]: ZADD - Variadic version will raise error on missing arg - $encoding (0 ms)
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation - $encoding (1 ms)
[ok]: ZCARD basics - listpack (0 ms)
[ok]: ZREM removes key after last element is removed - listpack (1 ms)
[ok]: ZREM variadic version - listpack (0 ms)
[ok]: Test separate read and write permissions on different selectors are not additive (1 ms)
[ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms)
[ok]: Test SET with separate read permission (1 ms)
[ok]: Negative multibulk payload length (4 ms)
[ok]: Pipelined commands after QUIT must not be executed (6 ms)
[ok]: HRANDFIELD - hashtable (7 ms)
[ok]: Test SET with separate write permission (1 ms)
[ok]: By default, only default user is able to subscribe to any shard channel (3 ms)
[ok]: HRANDFIELD with RESP3 (0 ms)
[ok]: HRANDFIELD count of 0 is handled correctly (0 ms)
[ok]: HRANDFIELD with <count> against non existing key (0 ms)
[ok]: ZRANGE basics - listpack (1 ms)
[ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (1 ms)
[ok]: HRANDFIELD with <count> against non existing key - emptyarray (0 ms)
[ok]: Test SET with read and write permissions (1 ms)
[ok]: Test BITFIELD with separate read permission (0 ms)
[ok]: Out of range multibulk payload length (3 ms)
[ok]: Test BITFIELD with separate write permission (1 ms)
[ok]: ZREVRANGE basics - listpack (1 ms)
[ok]: Test BITFIELD with read and write permissions (1 ms)
[ok]: ZRANK/ZREVRANK basics - listpack (0 ms)
[ok]: By default, only default user is able to subscribe to any pattern (3 ms)
[ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms)
[ok]: ZRANK - after deletion - listpack (0 ms)
[ok]: It's possible to allow publishing to a subset of channels (1 ms)
[ok]: It's possible to allow publishing to a subset of shard channels (0 ms)
[ok]: ZINCRBY - can create a new sorted set - listpack (0 ms)
[ok]: Test ACL GETUSER response information (0 ms)
[ok]: Non-number multibulk payload length (3 ms)
[ok]: SAVE - make sure there are all the types as values (18 ms)
[ok]: ZINCRBY - increment and decrement - listpack (1 ms)
[ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms)
[ok]: ZINCRBY return value - listpack (0 ms)
[ok]: Pipelined commands after QUIT that exceed read buffer size (7 ms)
[ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms)
[ok]: Multi bulk request not followed by bulk arguments (2 ms)
[ok]: XPENDING with IDLE (21 ms)
[ok]: XPENDING with exclusive range intervals works as expected (0 ms)
[ok]: XACK is able to remove items from the consumer/group PEL (0 ms)
[ok]: It's possible to allow subscribing to a subset of channels (4 ms)
[ok]: XACK can't remove the same item multiple times (0 ms)
[ok]: XACK is able to accept multiple arguments (0 ms)
[ok]: Test ACL list idempotency (5 ms)
[ok]: Test R+W is the same as all permissions (0 ms)
[ok]: Test basic dry run functionality (1 ms)
[ok]: XACK should fail if got at least one invalid ID (1 ms)
[ok]: Test various commands for command permissions (0 ms)
[ok]: Test various odd commands for key permissions (1 ms)
[ok]: PEL NACK reassignment after XGROUP SETID event (1 ms)
[ok]: Generic wrong number of args (4 ms)
[ok]: It's possible to allow subscribing to a subset of shard channels (3 ms)
[ok]: XREADGROUP will not report data on empty history. Bug #5577 (0 ms)
[ok]: Existence test commands are not marked as access (1 ms)
[ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms)
[ok]: Intersection cardinaltiy commands are access commands (0 ms)
[ok]: Test general keyspace commands require some type of permission to execute (1 ms)
[ok]: Unbalanced number of quotes (3 ms)
[ok]: Very big payload in GET/SET (30 ms)
[ok]: Cardinality commands require some type of permission to execute (2 ms)
[ok]: It's possible to allow subscribing to a subset of channel patterns (3 ms)
[ok]: Test sharded channel permissions (0 ms)
[ok]: Test sort with ACL permissions (1 ms)
[ok]: Test DRYRUN with wrong number of arguments (1 ms)
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (13 ms)
[ok]: SADD overflows the maximum allowed integers in an intset (29 ms)
[ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms)
[ok]: Variadic SADD (1 ms)
[ok]: Subscribers are killed when revoked of channel permission (4 ms)
[ok]: ZRANGEBYSCORE with LIMIT - listpack (1 ms)
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (0 ms)
[ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms)
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms)
[ok]: ZLEXCOUNT advanced - listpack (1 ms)
[ok]: Subscribers are killed when revoked of channel permission (3 ms)
[ok]: ZRANGEBYSLEX with LIMIT - listpack (1 ms)
[ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms)
[ok]: Subscribers are killed when revoked of pattern permission (4 ms)
[ok]: SCAN TYPE (56 ms)
[ok]: SSCAN with encoding intset (0 ms)
[ok]: SSCAN with encoding hashtable (1 ms)
[ok]: HSCAN with encoding listpack (0 ms)
[ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (3 ms)
[ok]: Users can be configured to authenticate with any password (0 ms)
[ok]: ACLs can exclude single commands (0 ms)
[ok]: ACLs can include or exclude whole classes of commands (1 ms)
[ok]: ACLs can include single subcommands (0 ms)
[ok]: ACLs can exclude single subcommands, case 1 (0 ms)
[ok]: ZREMRANGEBYSCORE basics - listpack (7 ms)
[ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms)
[ok]: ACLs can exclude single subcommands, case 2 (1 ms)
[ok]: ACLs cannot include a subcommand with a specific arg (0 ms)
[ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms)
[ok]: ACLs cannot exclude or include a container command with two args (0 ms)
[ok]: ACLs including of a type includes also subcommands (1 ms)
[ok]: ACLs can block SELECT of all but a specific DB (0 ms)
[ok]: ACLs can block all DEBUG subcommands except one (1 ms)
[ok]: ZREMRANGEBYRANK basics - listpack (2 ms)
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms)
[ok]: ACLs set can include subcommands, if already full command exists (1 ms)
[ok]: ZUNIONSTORE with empty set - listpack (0 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms)
[ok]: Protocol desync regression test #1 (23 ms)
[ok]: ZUNIONSTORE basics - listpack (0 ms)
[ok]: ACLs set can exclude subcommands, if already full command exists (2 ms)
[ok]: ACL GETUSER is able to translate back command permissions (0 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms)
[ok]: ZUNIONSTORE with weights - listpack (0 ms)
[ok]: ZUNION with weights - listpack (0 ms)
[ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms)
[ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms)
[ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms)
[ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms)
[ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (1 ms)
[ok]: ZINTERSTORE basics - listpack (0 ms)
[ok]: ZINTER basics - listpack (0 ms)
[ok]: ZINTERCARD with illegal arguments (0 ms)
[ok]: ZINTERCARD basics - listpack (1 ms)
[ok]: ZINTER RESP3 - listpack (0 ms)
[ok]: ZINTERSTORE with weights - listpack (0 ms)
[ok]: ZINTER with weights - listpack (0 ms)
[ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms)
[ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms)
[ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms)
[ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms)
[ok]: ZUNIONSTORE with NaN weights - listpack (0 ms)
[ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms)
[ok]: ZINTERSTORE with NaN weights - listpack (1 ms)
[ok]: ZDIFFSTORE basics - listpack (0 ms)
[ok]: ZDIFF basics - listpack (0 ms)
[ok]: ZDIFFSTORE with a regular set - listpack (0 ms)
[ok]: ZDIFF subtracting set from itself - listpack (0 ms)
[ok]: ZDIFF algorithm 1 - listpack (1 ms)
[ok]: ZDIFF algorithm 2 - listpack (0 ms)
[ok]: XADD with MAXLEN option (63 ms)
[ok]: ACL GETUSER provides reasonable results (15 ms)
[ok]: ACL CAT with illegal arguments (0 ms)
[ok]: ACL CAT without category - list all categories (0 ms)
[ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms)
[ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms)
[ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms)
[ok]: Protocol desync regression test #2 (18 ms)
[ok]: ACL LOG shows failed command executions at toplevel (0 ms)
[ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms)
[ok]: ACL LOG is able to test similar events (0 ms)
[ok]: ACL LOG is able to log keys access violations and key name (1 ms)
[ok]: ACL LOG is able to log channel access violations and channel name (0 ms)
[ok]: ACL LOG RESET is able to flush the entries in the log (0 ms)
[ok]: ACL LOG can distinguish the transaction context (1) (1 ms)
[ok]: ACL LOG can distinguish the transaction context (2) (4 ms)
[ok]: ACL can log errors in the context of Lua scripting (0 ms)
[ok]: ACL LOG can accept a numerical argument to show less entries (1 ms)
[ok]: Blocking XREADGROUP will not reply with an empty array (50 ms)
[ok]: ACL LOG can log failed auth attempts (1 ms)
[ok]: ACL LOG entries are limited to a maximum amount (1 ms)
[ok]: Blocking XREADGROUP: key deleted (3 ms)
[ok]: When default user is off, new connections are not authenticated (3 ms)
[ok]: When default user has no command permission, hello command still works for other users (0 ms)
[ok]: ACL HELP should not have unexpected options (1 ms)
[ok]: Delete a user that the client doesn't use (0 ms)
[ok]: Delete a user that the client is using (0 ms)
[ok]: Blocking XREADGROUP: key type changed with SET (3 ms)
[ok]: ACL GENPASS command failed test (3 ms)
[ok]: Default user can not be removed (0 ms)
[ok]: ACL load non-existing configured ACL file (1 ms)
[ok]: Blocking XREADGROUP: key type changed with transaction (3 ms)
[ok]: Protocol desync regression test #3 (22 ms)
[ok]: raw protocol response (0 ms)
[ok]: raw protocol response - deferred (0 ms)
[ok]: raw protocol response - multiline (0 ms)
[ok]: RESP3 attributes (0 ms)
[ok]: RESP3 attributes readraw (1 ms)
[ok]: RESP3 attributes on RESP2 (0 ms)
[ok]: test big number parsing (0 ms)
[ok]: test bool parsing (1 ms)
[ok]: test verbatim str parsing (0 ms)
[ok]: HSCAN with encoding hashtable (58 ms)
[ok]: ZSCAN with encoding listpack (1 ms)
[1/81 done]: unit/printver (0 seconds)
Testing integration/replication-psync
[ok]: HRANDFIELD with <count> - hashtable (90 ms)
[2/81 done]: unit/type/incr (0 seconds)
Testing integration/replication-buffer
[ok]: test large number of args (12 ms)
[ok]: test argument rewriting - issue 9598 (1 ms)
[ok]: EXEC fail on lazy expired WATCHed key (103 ms)
[ok]: WATCH stale keys should not fail EXEC (3 ms)
[3/81 done]: unit/info-command (0 seconds)
Testing integration/shutdown
[ok]: Delete WATCHed stale keys should not fail EXEC (3 ms)
[ok]: Blocking XREADGROUP: flushed DB (32 ms)
[ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms)
[ok]: After successful EXEC key is no longer watched (0 ms)
[ok]: After failed EXEC key is no longer watched (0 ms)
[ok]: It is possible to UNWATCH (1 ms)
[ok]: UNWATCH when there is nothing watched works as expected (0 ms)
[4/81 done]: unit/quit (0 seconds)
Testing integration/aof
[ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (5 ms)
[ok]: XADD with MAXLEN option and the '=' argument (64 ms)
[ok]: Blocking XREADGROUP: swapped DB, key is not a stream (4 ms)
[ok]: Blocking XREAD: key deleted (5 ms)
[ok]: latencystats: disable/enable (1 ms)
[ok]: Regression for quicklist #3343 bug (136 ms)
[ok]: Check compression with recompress (1 ms)
[ok]: latencystats: configure percentiles (2 ms)
[ok]: Blocking XREAD: key type changed with SET (3 ms)
[ok]: Crash due to wrongly recompress after lrem (1 ms)
[ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (1 ms)
[ok]: latencystats: bad configure percentiles (1 ms)
[ok]: Set encoding after DEBUG RELOAD (107 ms)
[ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (1 ms)
[ok]: SREM basics - regular set (1 ms)
[ok]: Slave enters handshake (2 ms)
[ok]: SREM basics - intset (0 ms)
[ok]: SREM with multiple arguments (1 ms)
[ok]: SREM variadic version with more args needed to destroy the key (0 ms)
[ok]: SINTERCARD with illegal arguments (1 ms)
[ok]: SINTERCARD against non-set should throw error (1 ms)
[ok]: SINTERCARD against non-existing key (0 ms)
[ok]: latencystats: blocking commands (6 ms)
[ok]: FLUSHALL is able to touch the watched keys (22 ms)
[ok]: latencystats: subcommands (1 ms)
[ok]: ZSCAN with encoding skiplist (61 ms)
[ok]: FLUSHALL does not touch non affected keys (25 ms)
[ok]: FLUSHDB is able to touch the watched keys (1 ms)
[ok]: FLUSHDB does not touch non affected keys (0 ms)
[ok]: Old Linked list: SORT BY key (7 ms)
[ok]: Old Linked list: SORT BY key with limit (1 ms)
[ok]: Generated sets must be encoded as hashtable (0 ms)
[ok]: SINTER with two sets - hashtable (0 ms)
[ok]: SINTERCARD with two sets - hashtable (1 ms)
[ok]: SINTERSTORE with two sets - hashtable (0 ms)
[ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (42 ms)
[ok]: Old Linked list: SORT BY hash field (7 ms)
[ok]: SCAN guarantees check under write load (17 ms)
[ok]: SSCAN with integer encoded object (issue #1345) (0 ms)
[ok]: SSCAN with PATTERN (0 ms)
[ok]: HSCAN with PATTERN (0 ms)
[ok]: ZSCAN with PATTERN (0 ms)
[ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (7 ms)
[ok]: XADD with MAXLEN option and the '~' argument (62 ms)
[ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (4 ms)
[ok]: XADD with NOMKSTREAM option (0 ms)
[ok]: RENAME can unblock XREADGROUP with data (3 ms)
[ok]: SWAPDB is able to touch the watched keys that exist (26 ms)
[ok]: RENAME can unblock XREADGROUP with -NOGROUP (3 ms)
[ok]: latencystats: measure latency (51 ms)
[ok]: errorstats: failed call authentication error (1 ms)
[ok]: HRANDFIELD with <count> - listpack (96 ms)
[ok]: errorstats: failed call within MULTI/EXEC (1 ms)
[ok]: errorstats: failed call within LUA (2 ms)
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - hashtable (24 ms)
[ok]: errorstats: failed call NOSCRIPT error (1 ms)
[ok]: errorstats: failed call NOGROUP error (2 ms)
[ok]: errorstats: rejected call unknown command (1 ms)
[ok]: errorstats: rejected call within MULTI/EXEC (2 ms)
[ok]: SUNION with two sets - hashtable (6 ms)
[ok]: errorstats: rejected call due to wrong arity (2 ms)
[ok]: errorstats: rejected call by OOM error (1 ms)
[ok]: errorstats: rejected call by authorization error (2 ms)
[ok]: SUNIONSTORE with two sets - hashtable (7 ms)
[ok]: SINTER against three sets - hashtable (0 ms)
[ok]: SINTERCARD against three sets - hashtable (1 ms)
[ok]: SWAPDB is able to touch the watched keys that do not exist (20 ms)
[ok]: SINTERSTORE with three sets - hashtable (0 ms)
[ok]: errorstats: blocking commands (5 ms)
[ok]: ZSCAN scores: regression test for issue #2175 (38 ms)
[ok]: SUNION with non existing keys - hashtable (7 ms)
[ok]: SDIFF with two sets - hashtable (0 ms)
[ok]: SDIFF with three sets - hashtable (0 ms)
[ok]: SDIFFSTORE with three sets - hashtable (1 ms)
[ok]: SINTER/SUNION/SDIFF with three same sets - hashtable (3 ms)
[ok]: AUTH fails when a wrong password is given (4 ms)
[ok]: Arbitrary command gives an error when AUTH is required (0 ms)
[ok]: AUTH succeeds when the right password is given (1 ms)
[ok]: Once AUTH succeeded we can actually send commands to the server (0 ms)
[ok]: Unfinished MULTI: Server should start if load-truncated is yes (3 ms)
[ok]: Test LPUSH and LPOP on plain nodes (25 ms)
[ok]: First server should have role slave after SLAVEOF (104 ms)
[ok]: If min-slaves-to-write is honored, write is accepted (0 ms)
[ok]: No write if min-slaves-to-write is < attached slaves (1 ms)
[ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms)
[ok]: First server should have role slave after SLAVEOF (103 ms)
[ok]: Test LINDEX and LINSERT on plain nodes (2 ms)
[ok]: SWAPDB does not touch watched stale keys (26 ms)
[ok]: Test LTRIM on plain nodes (1 ms)
[ok]: MIGRATE is caching connections (250 ms)
[ok]: Test LREM on plain nodes (1 ms)
[ok]: Test LPOS on plain nodes (1 ms)
[ok]: Test LMOVE on plain nodes (2 ms)
[ok]: For unauthenticated clients multibulk and bulk length are limited (10 ms)
[ok]: Test behavior of loading ACLs (2 ms)
[ok]: SWAPDB does not touch non-existing key replaced with stale key (16 ms)
[ok]: XADD with MINID option (71 ms)
[ok]: XTRIM with MINID option (0 ms)
[ok]: XTRIM with MINID option, big delta from master record (0 ms)
[ok]: Generated sets must be encoded as intset (0 ms)
[ok]: SINTER with two sets - intset (0 ms)
[ok]: SINTERCARD with two sets - intset (0 ms)
[ok]: SINTERSTORE with two sets - intset (1 ms)
[ok]: SWAPDB does not touch stale key replaced with another stale key (15 ms)
[ok]: WATCH is able to remember the DB a key belongs to (1 ms)
[ok]: WATCH will consider touched keys target of EXPIRE (1 ms)
[ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (21 ms)
[ok]: Test LSET with packed / plain combinations (44 ms)
[ok]: Test LSET with packed is split in the middle (2 ms)
[ok]: HSET/HLEN - Big hash creation (92 ms)
[ok]: Is the big hash encoded with an hash table? (1 ms)
[ok]: HGET against the small hash (0 ms)
[ok]: SUNION with two sets - intset (5 ms)
[ok]: SUNIONSTORE with two sets - intset (4 ms)
[ok]: SINTER against three sets - intset (0 ms)
[ok]: SINTERCARD against three sets - intset (1 ms)
[ok]: SINTERSTORE with three sets - intset (0 ms)
[ok]: SUNION with non existing keys - intset (4 ms)
[ok]: SDIFF with two sets - intset (0 ms)
[ok]: SDIFF with three sets - intset (0 ms)
[ok]: SDIFFSTORE with three sets - intset (0 ms)
[ok]: SINTER/SUNION/SDIFF with three same sets - intset (3 ms)
[ok]: SDIFF with first set empty (0 ms)
[ok]: SDIFF with same set two times (0 ms)
[ok]: Regression for a crash with blocking ops and pipelining (5 ms)
[ok]: FUZZ stresser with data model binary (330 ms)
[ok]: HGET against the big hash (60 ms)
[ok]: HGET against non existing key (0 ms)
[ok]: HSET in update and insert mode (1 ms)
[ok]: HSETNX target key missing - small hash (1 ms)
[ok]: HSETNX target key exists - small hash (0 ms)
[ok]: HSETNX target key missing - big hash (0 ms)
[ok]: HSETNX target key exists - big hash (0 ms)
[ok]: HSET/HMSET wrong number of args (0 ms)
[ok]: HMSET - small hash (0 ms)
[5/81 done]: unit/acl-v2 (0 seconds)
Testing integration/aof-multi-part
[ok]: default: load from include file, can access any channels (0 ms)
[ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms)
[ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms)
[ok]: Alice: can execute all command (0 ms)
[ok]: Bob: just execute @set and acl command (0 ms)
[ok]: ACL load and save (6 ms)
[ok]: ACL load and save with restricted channels (6 ms)
[6/81 done]: unit/info (0 seconds)
Testing integration/rdb
[ok]: HMSET - big hash (52 ms)
[ok]: HMGET against non existing key and fields (0 ms)
[ok]: HMGET against wrong type (1 ms)
[ok]: HMGET - small hash (0 ms)
[ok]: Test LSET with packed consist only one item (136 ms)
[7/81 done]: unit/protocol (0 seconds)
Testing integration/corrupt-dump
[ok]: HMGET - big hash (54 ms)
[ok]: HKEYS - small hash (0 ms)
[ok]: HKEYS - big hash (13 ms)
[ok]: HVALS - small hash (0 ms)
[ok]: Multi Part AOF can't load data when some file missing (126 ms)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: HVALS - big hash (2 ms)
[ok]: HGETALL - small hash (0 ms)
[ok]: AUTH fails when binary password is wrong (0 ms)
[ok]: Short read: Server should start if load-truncated is yes (2 ms)
[ok]: AUTH succeeds when binary password is correct (0 ms)
[ok]: Truncated AOF loaded: we expect foo to be equal to 5 (5 ms)
[ok]: Append a new command after loading an incomplete AOF (0 ms)
[ok]: HGETALL - big hash (24 ms)
[ok]: HDEL and return value (0 ms)
[ok]: HDEL - more than a single value (0 ms)
[ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms)
[ok]: HEXISTS (1 ms)
[ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms)
[ok]: HINCRBY against non existing database key (0 ms)
[ok]: HINCRBY against non existing hash key (0 ms)
[ok]: HINCRBY against hash key created by hincrby itself (0 ms)
[ok]: HINCRBY against hash key originally set with HSET (0 ms)
[ok]: HINCRBY over 32bit value (0 ms)
[ok]: HINCRBY over 32bit value with over 32bit increment (1 ms)
[ok]: HINCRBY fails against hash value with spaces (left) (0 ms)
[ok]: HINCRBY fails against hash value with spaces (right) (1 ms)
[ok]: HINCRBY can detect overflows (0 ms)
[ok]: HINCRBYFLOAT against non existing database key (0 ms)
[ok]: HINCRBYFLOAT against non existing hash key (1 ms)
[ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms)
[ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms)
[ok]: HINCRBYFLOAT over 32bit value (0 ms)
[ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms)
[ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms)
[ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms)
[ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms)
[ok]: HSTRLEN against the small hash (0 ms)
[ok]: test old version rdb file (0 ms)
[ok]: HSTRLEN against the big hash (71 ms)
[ok]: HSTRLEN against non existing field (0 ms)
[ok]: HSTRLEN corner cases (2 ms)
[ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms)
[ok]: Hash ziplist regression test for large keys (0 ms)
[ok]: Multi Part AOF can't load data when the sequence not increase monotonically (123 ms)
[ok]: Default user has access to all channels irrespective of flag (1 ms)
[ok]: Hash fuzzing #1 - 10 fields (22 ms)
[ok]: Update acl-pubsub-default, existing users shouldn't get affected (2 ms)
[ok]: Single channel is valid (1 ms)
[ok]: Single channel is not valid with allchannels (0 ms)
[ok]: Hash fuzzing #2 - 10 fields (18 ms)
[ok]: LPOS basic usage (0 ms)
[ok]: LPOS RANK (positive, negative and zero rank) option (1 ms)
[ok]: LPOS COUNT option (1 ms)
[ok]: LPOS COUNT + RANK option (0 ms)
[ok]: LPOS non existing key (0 ms)
[ok]: LPOS no match (0 ms)
[ok]: LPOS MAXLEN (1 ms)
[ok]: LPOS when RANK is greater than matches (0 ms)
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - ziplist (2 ms)
[ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - regular list (2 ms)
[ok]: LPOP/RPOP with wrong number of arguments (0 ms)
[ok]: RPOP/LPOP with the optional count argument (1 ms)
[ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms)
[ok]: LPOP/RPOP against non existing key in RESP3 (1 ms)
[ok]: LPOP/RPOP with <count> against non existing key in RESP3 (0 ms)
[ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms)
[ok]: LPOP/RPOP against non existing key in RESP2 (1 ms)
[ok]: LPOP/RPOP with <count> against non existing key in RESP2 (0 ms)
[ok]: Variadic RPUSH/LPUSH (0 ms)
[ok]: DEL a list (0 ms)
[ok]: BLPOP: single existing list - linkedlist (6 ms)
[ok]: BLPOP: multiple existing lists - linkedlist (6 ms)
[ok]: BLPOP: second list has an entry - linkedlist (4 ms)
[ok]: BLMPOP_LEFT: single existing list - linkedlist (4 ms)
[ok]: corrupt payload: #7445 - with sanitize (238 ms)
[ok]: BLMPOP_LEFT: multiple existing lists - linkedlist (5 ms)
[ok]: BLMPOP_LEFT: second list has an entry - linkedlist (4 ms)
[ok]: BRPOPLPUSH - linkedlist (4 ms)
[ok]: BLMOVE left left - linkedlist (4 ms)
[ok]: BLMOVE left right - linkedlist (4 ms)
[ok]: BLMOVE right left - linkedlist (4 ms)
[ok]: BLMOVE right right - linkedlist (4 ms)
[ok]: FUZZ stresser with data model alpha (360 ms)
[ok]: BLPOP: single existing list - ziplist (9 ms)
[ok]: BLPOP: multiple existing lists - ziplist (4 ms)
[ok]: BLPOP: second list has an entry - ziplist (5 ms)
[ok]: Short read + command: Server should start (2 ms)
[ok]: BLMPOP_LEFT: single existing list - ziplist (5 ms)
[ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (6 ms)
[ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (126 ms)
[ok]: BLMPOP_LEFT: multiple existing lists - ziplist (4 ms)
[ok]: BLMPOP_LEFT: second list has an entry - ziplist (3 ms)
[ok]: BRPOPLPUSH - ziplist (4 ms)
[ok]: BLMOVE left left - ziplist (5 ms)
[ok]: BLMOVE left right - ziplist (4 ms)
[ok]: BLMOVE right left - ziplist (3 ms)
[ok]: BLMOVE right right - ziplist (5 ms)
[ok]: RDB encoding loading test (4 ms)
[ok]: XCLAIM can claim PEL items from another consumer (605 ms)
[ok]: Only default user has access to all channels irrespective of flag (0 ms)
[ok]: Multi Part AOF can't load data when there is a duplicate base file (124 ms)
[ok]: BLPOP, LPUSH + DEL should not awake blocked client (104 ms)
[ok]: corrupt payload: hash with valid zip list header, invalid entry len (241 ms)
[ok]: Bad format: Server should have logged an error (1 ms)
[ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (106 ms)
[ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (120 ms)
[ok]: Server started empty with non-existing RDB file (0 ms)
[ok]: FUZZ stresser with data model compr (335 ms)
[ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (105 ms)
[ok]: Unfinished MULTI: Server should have logged an error (1 ms)
[ok]: default: load from config file, without channel permission default user can't access any channels (0 ms)
[ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (122 ms)
[ok]: DEL against expired key (1101 ms)
[ok]: EXISTS (1 ms)
[ok]: Zero length value in key. SET/GET/EXISTS (0 ms)
[ok]: Commands pipelining (0 ms)
[ok]: Non existing command (0 ms)
[ok]: RENAME basic usage (0 ms)
[ok]: RENAME source key should no longer exist (1 ms)
[ok]: RENAME against already existing key (0 ms)
[ok]: RENAMENX basic usage (1 ms)
[ok]: RENAMENX against already existing key (0 ms)
[ok]: RENAMENX against already existing key (2) (0 ms)
[ok]: RENAME against non existing source key (0 ms)
[ok]: RENAME where source and dest key are the same (existing) (0 ms)
[ok]: RENAMENX where source and dest key are the same (existing) (1 ms)
[ok]: RENAME where source and dest key are the same (non existing) (0 ms)
[ok]: RENAME with volatile key, should move the TTL as well (1 ms)
[ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms)
[ok]: DEL all keys again (DB 0) (1 ms)
[ok]: DEL all keys again (DB 1) (0 ms)
[ok]: COPY basic usage for string (1 ms)
[ok]: COPY for string does not replace an existing key without REPLACE option (0 ms)
[ok]: COPY for string can replace an existing key with REPLACE option (0 ms)
[ok]: First server should have role slave after SLAVEOF (1003 ms)
[ok]: First server should have role slave after SLAVEOF (1003 ms)
[ok]: COPY for string ensures that copied data is independent of copying data (1 ms)
[ok]: COPY for string does not copy data to no-integer DB (1 ms)
[ok]: COPY can copy key expire metadata as well (0 ms)
[ok]: COPY does not create an expire if it does not exist (1 ms)
[ok]: COPY basic usage for list (0 ms)
[ok]: COPY basic usage for intset set (0 ms)
[ok]: COPY basic usage for hashtable set (0 ms)
[ok]: COPY basic usage for listpack sorted set (1 ms)
[ok]: COPY basic usage for skiplist sorted set (9 ms)
[ok]: COPY basic usage for listpack hash (0 ms)
[ok]: COPY basic usage for hashtable hash (7 ms)
[ok]: corrupt payload: invalid zlbytes header (241 ms)
[ok]: FLUSHALL should not reset the dirty counter if we disable save (0 ms)
[ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (107 ms)
[ok]: BLPOP with same key multiple times should work (issue #801) (4 ms)
[ok]: Short read: Server should have logged an error (1 ms)
[ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (20 ms)
[ok]: Short read: Utility should confirm the AOF is not valid (4 ms)
[ok]: XCLAIM without JUSTID increments delivery count (403 ms)
[ok]: Short read: Utility should show the abnormal line num in AOF (6 ms)
[ok]: Short read: Utility should be able to fix the AOF (3 ms)
[ok]: COPY basic usage for stream (76 ms)
[ok]: COPY basic usage for stream-cgroups (3 ms)
[ok]: MOVE basic usage (1 ms)
[ok]: MOVE against key existing in the target DB (0 ms)
[ok]: MOVE against non-integer DB (#1428) (1 ms)
[ok]: MOVE can move key expire metadata as well (0 ms)
[ok]: MOVE does not create an expire if it does not exist (1 ms)
[ok]: SET/GET keys in different DBs (1 ms)
[ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (125 ms)
[ok]: RANDOMKEY (6 ms)
[ok]: RANDOMKEY against empty DB (1 ms)
[ok]: RANDOMKEY regression 1 (0 ms)
[ok]: KEYS * two times with long key, Github issue #1208 (0 ms)
[ok]: Server started empty with empty RDB file (0 ms)
[ok]: Very big payload random access (1228 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BLPOP (105 ms)
[ok]: BLPOP with variadic LPUSH (6 ms)
[ok]: WATCH will consider touched expired keys (1033 ms)
[ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms)
[ok]: DISCARD should UNWATCH all the keys (0 ms)
[8/81 done]: unit/keyspace (1 seconds)
Testing integration/corrupt-dump-fuzzer
[ok]: Fixed AOF: Server should have been started (2 ms)
[ok]: default: load from config file with all channels permissions (0 ms)
[ok]: Fixed AOF: Keyspace should contain values that were parseable (5 ms)
[ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (120 ms)
[ok]: corrupt payload: valid zipped hash header, dup records (242 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (107 ms)
[ok]: MULTI / EXEC is not propagated (single write command) (96 ms)
[ok]: BLMPOP_LEFT with variadic LPUSH (4 ms)
[ok]: BRPOPLPUSH with zero timeout should block indefinitely (4 ms)
[ok]: BLMOVE left left with zero timeout should block indefinitely (5 ms)
[ok]: BLMOVE left right with zero timeout should block indefinitely (5 ms)
[ok]: BLMOVE right left with zero timeout should block indefinitely (5 ms)
[ok]: BLMOVE right right with zero timeout should block indefinitely (4 ms)
[ok]: BGSAVE (157 ms)
[ok]: SELECT an out of range DB (0 ms)
[ok]: BLMOVE (left, left) with a client BLPOPing the target list (7 ms)
[ok]: BLMOVE (left, right) with a client BLPOPing the target list (7 ms)
[ok]: XCLAIM same consumer (250 ms)
[ok]: BLMOVE (right, left) with a client BLPOPing the target list (9 ms)
[ok]: BLMOVE (right, right) with a client BLPOPing the target list (6 ms)
[ok]: BRPOPLPUSH with wrong source type (4 ms)
[ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (122 ms)
[ok]: BRPOPLPUSH with wrong destination type (9 ms)
[ok]: BRPOPLPUSH maintains order of elements after failure (4 ms)
[ok]: Detect write load to master (1004 ms)
[ok]: BRPOPLPUSH with multiple blocked clients (8 ms)
[ok]: BLMPOP with multiple blocked clients (13 ms)
[ok]: MULTI / EXEC is propagated correctly (multiple commands) (102 ms)
[ok]: Linked LMOVEs (16 ms)
[ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (38 ms)
[ok]: Circular BRPOPLPUSH (9 ms)
[ok]: Self-referential BRPOPLPUSH (3 ms)
[ok]: BRPOPLPUSH inside a transaction (1 ms)
[ok]: PUSH resulting from BRPOPLPUSH affect WATCH (6 ms)
[ok]: BRPOPLPUSH does not affect WATCH while still blocked (9 ms)
[ok]: MASTERAUTH test with binary password (945 ms)
[ok]: Test loading an ACL file with duplicate users (5 ms)
[ok]: Multi Part AOF can't load data when the manifest file is empty (121 ms)
[ok]: Test loading an ACL file with duplicate default user (4 ms)
[ok]: AOF+SPOP: Server should have been started (2 ms)
[ok]: Test loading duplicate users in config on startup (8 ms)
[ok]: AOF+SPOP: Set should have 1 member (7 ms)
[ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (102 ms)
[ok]: Hash fuzzing #1 - 512 fields (980 ms)
[ok]: corrupt payload: quicklist big ziplist prev len (270 ms)
[ok]: Test RDB stream encoding (108 ms)
[ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms)
[ok]: XADD mass insertion and XLEN (1452 ms)
[ok]: XADD with ID 0-0 (0 ms)
[ok]: XADD with LIMIT delete entries no more than limit (1 ms)
[ok]: XRANGE COUNT works as expected (0 ms)
[ok]: XREVRANGE COUNT works as expected (0 ms)
[9/81 done]: unit/auth (2 seconds)
Testing integration/convert-zipmap-hash-on-load
[ok]: Test RDB stream encoding - sanitize dump (43 ms)
[ok]: Multi Part AOF can start when no aof and no manifest (194 ms)
[ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms)
[ok]: AOF+SPOP: Server should have been started (2 ms)
[ok]: AOF+SPOP: Set should have 1 member (4 ms)
[ok]: RDB load zipmap hash: converts to listpack (0 ms)
[ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms)
[ok]: corrupt payload: quicklist small ziplist prev len (240 ms)
[ok]: Check consistency of different data types after a reload (489 ms)
[ok]: Multi Part AOF can start when we have en empty AOF dir (180 ms)
[ok]: Server should not start if RDB file can't be open (2 ms)
[ok]: XRANGE can be used to iterate the whole stream (265 ms)
[ok]: MULTI / EXEC with REPLICAOF (101 ms)
[ok]: DISCARD should not fail during OOM (5 ms)
[ok]: Slave should be able to synchronize with the master (102 ms)
[ok]: XAUTOCLAIM can claim PEL items from another consumer (607 ms)
[ok]: Server should not start if RDB is corrupted (2 ms)
[ok]: ACL from config file and config rewrite (243 ms)
[ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2103 ms)
[ok]: EXPIRE - write on expire should work (1 ms)
[ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms)
[ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms)
[ok]: SETEX - Check value (0 ms)
[ok]: Shutting down master waits for replica to catch up (sigterm) (1986 ms)
[ok]: SETEX - Overwrite old key (0 ms)
[ok]: AOF+EXPIRE: Server should have been started (2 ms)
[ok]: AOF+EXPIRE: List should be empty (5 ms)
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms)
[ok]: Same dataset digest if saving/reloading as AOF? (211 ms)
[ok]: corrupt payload: quicklist ziplist wrong count (244 ms)
[10/81 done]: unit/acl (2 seconds)
Testing integration/convert-ziplist-hash-on-load
[ok]: Multi Part AOF can load data discontinuously increasing sequence (267 ms)
[ok]: Hash fuzzing #2 - 512 fields (626 ms)
[ok]: EXPIRES after a reload (snapshot + append only file rewrite) (124 ms)
[ok]: XAUTOCLAIM as an iterator (202 ms)
[ok]: XAUTOCLAIM COUNT must be > 0 (0 ms)
[ok]: XCLAIM with XDEL (1 ms)
[ok]: XCLAIM with trimming (1 ms)
[ok]: XAUTOCLAIM with XDEL (1 ms)
[ok]: XAUTOCLAIM with XDEL and count (1 ms)
[ok]: XCLAIM with trimming (1 ms)
[ok]: XINFO FULL output (3 ms)
[ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms)
[ok]: XGROUP CREATECONSUMER: group must exist (0 ms)
[ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms)
[ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms)
[ok]: Old Big Linked list: SORT BY key (330 ms)
[ok]: Old Big Linked list: SORT BY key with limit (5 ms)
[ok]: corrupt payload: #3080 - quicklist (255 ms)
[ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms)
[ok]: MULTI and script timeout (414 ms)
[ok]: SET 10000 numeric keys and access all them in reverse order (1184 ms)
[ok]: DBSIZE should be 10000 now (0 ms)
[ok]: SETNX target key missing (0 ms)
[ok]: SETNX target key exists (1 ms)
[ok]: SETNX against not-expired volatile key (0 ms)
[ok]: XREADGROUP with NOACK creates consumer (38 ms)
[ok]: Test FLUSHALL aborts bgsave (224 ms)
[ok]: Multi Part AOF can load data when manifest add new k-v (285 ms)
[11/81 done]: integration/convert-zipmap-hash-on-load (1 seconds)
Testing integration/convert-ziplist-zset-on-load
[ok]: bgsave resets the change counter (103 ms)
[ok]: BRPOPLPUSH timeout (1022 ms)
[ok]: SWAPDB awakes blocked client (37 ms)
[ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms)
[ok]: Stress tester for #3343-alike bugs comp: 2 (2498 ms)
[ok]: All replicas share one global replication buffer (53 ms)
[ok]: Replication buffer will become smaller when no replica uses (2 ms)
[ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms)
[ok]: corrupt payload: quicklist with empty ziplist (262 ms)
[ok]: Consumer without PEL is present in AOF after AOFRW (230 ms)
[12/81 done]: integration/convert-ziplist-hash-on-load (1 seconds)
Testing integration/logging
[ok]: Old Big Linked list: SORT BY hash field (334 ms)
[ok]: Intset: SORT BY key (0 ms)
[ok]: Intset: SORT BY key with limit (0 ms)
[ok]: Intset: SORT BY hash field (1 ms)
[ok]: SWAPDB wants to wake blocked client, but the key already expired (172 ms)
[ok]: Multi Part AOF can load data when some AOFs are empty (267 ms)
[ok]: Consumer group read counter and lag in empty streams (2 ms)
[ok]: Consumer group read counter and lag sanity (4 ms)
[ok]: Consumer group lag with XDELs (8 ms)
[ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms)
[ok]: EXEC and script timeout (414 ms)
[ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms)
[ok]: corrupt payload: quicklist encoded_len is 0 (251 ms)
[ok]: Hash table: SORT BY key (8 ms)
[ok]: Hash table: SORT BY key with limit (0 ms)
[ok]: Hash table: SORT BY hash field (7 ms)
[ok]: SDIFF fuzzing (2663 ms)
[ok]: SDIFF against non-set should throw error (1 ms)
[ok]: SDIFF should handle non existing key as empty (0 ms)
[ok]: SDIFFSTORE against non-set should throw error (1 ms)
[ok]: SDIFFSTORE should handle non existing key as empty (1 ms)
[ok]: SINTER against non-set should throw error (1 ms)
[ok]: SINTER should handle non existing key as empty (0 ms)
[ok]: SINTER with same integer elements but different encoding (1 ms)
[ok]: SINTERSTORE against non-set should throw error (1 ms)
[ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms)
[ok]: SUNION against non-set should throw error (1 ms)
[ok]: SUNION should handle non existing key as empty (0 ms)
[ok]: SUNIONSTORE against non-set should throw error (1 ms)
[ok]: SUNIONSTORE should handle non existing key as empty (1 ms)
[ok]: SUNIONSTORE against non existing keys should delete dstkey (1 ms)
[ok]: SPOP basics - hashtable (0 ms)
[ok]: SPOP with <count>=1 - hashtable (0 ms)
[ok]: SRANDMEMBER - hashtable (7 ms)
[ok]: SPOP basics - intset (1 ms)
[ok]: SPOP with <count>=1 - intset (0 ms)
[ok]: SRANDMEMBER - intset (8 ms)
[ok]: SPOP with <count> (2 ms)
[ok]: SPOP with <count> (2 ms)
[ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms)
[ok]: SPOP using integers with Knuth's algorithm (0 ms)
[ok]: SPOP new implementation: code path #1 (1 ms)
[ok]: SPOP new implementation: code path #2 (2 ms)
[ok]: SPOP new implementation: code path #3 (1 ms)
[ok]: SRANDMEMBER count of 0 is handled correctly (0 ms)
[ok]: SRANDMEMBER with <count> against non existing key (1 ms)
[ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms)
[ok]: SRANDMEMBER with <count> against non existing key - emptyarray (0 ms)
[ok]: SRANDMEMBER with <count> - hashtable (17 ms)
[ok]: SRANDMEMBER with <count> - intset (14 ms)
[ok]: Detect write load to master (1001 ms)
[ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (281 ms)
[ok]: XREVRANGE returns the reverse of XRANGE (1081 ms)
[ok]: BLPOP when new key is moved into place (3 ms)
[ok]: Server is able to generate a stack trace on selected systems (203 ms)
[ok]: XRANGE exclusive ranges (3 ms)
[ok]: XREAD with non empty stream (0 ms)
[ok]: Non blocking XREAD with empty streams (0 ms)
[ok]: BLPOP when result key is created by SORT..STORE (4 ms)
[ok]: No write if min-slaves-max-lag is > of the slave lag (2829 ms)
[ok]: BLMPOP_LEFT when new key is moved into place (4 ms)
[ok]: min-slaves-to-write is ignored by slaves (1 ms)
[ok]: BLMPOP_LEFT when result key is created by SORT..STORE (5 ms)
[ok]: BLPOP: with single empty list argument (5 ms)
[ok]: BLPOP: with negative timeout (3 ms)
[ok]: BLPOP: with non-integer timeout (3 ms)
[ok]: SRANDMEMBER histogram distribution - hashtable (61 ms)
[13/81 done]: integration/convert-ziplist-zset-on-load (0 seconds)
Testing integration/psync2
[ok]: Stress test the hash ziplist -> hashtable encoding conversion (892 ms)
[ok]: Test HINCRBYFLOAT for correct float representation (issue #2846) (0 ms)
[ok]: ZDIFF fuzzing - listpack (3094 ms)
[ok]: ZPOPMIN with the count 0 returns an empty array (0 ms)
[ok]: ZPOPMIN with negative count (1 ms)
[ok]: ZPOPMAX with the count 0 returns an empty array (0 ms)
[ok]: ZPOPMAX with negative count (0 ms)
[ok]: SRANDMEMBER histogram distribution - intset (56 ms)
[ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (2 ms)
[ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms)
[ok]: SMOVE basics - from regular set to intset (2 ms)
[ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms)
[ok]: SMOVE basics - from intset to regular set (1 ms)
[ok]: SMOVE non existing key (1 ms)
[ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms)
[ok]: SMOVE non existing src set (1 ms)
[ok]: SMOVE from regular set to non existing destination set (1 ms)
[ok]: SMOVE from intset to non existing destination set (1 ms)
[ok]: SMOVE wrong src key type (0 ms)
[ok]: SMOVE wrong dst key type (0 ms)
[ok]: SMOVE with identical source and destination (1 ms)
[ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (5 ms)
[ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (5 ms)
[ok]: SMOVE only notify dstset when the addition is successful (5 ms)
[ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (4 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (3 ms)
[ok]: Consumer group last ID propagation to slave (NOACK=0) (216 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (5 ms)
[ok]: Hash ziplist of various encodings (45 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (4 ms)
[ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms)
[ok]: Hash ziplist of various encodings - sanitize dump (2 ms)
[ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms)
[ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (0 ms)
[ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms)
[ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (5 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (4 ms)
[ok]: Check encoding - skiplist (1 ms)
[ok]: ZSET basic ZADD and score update - skiplist (0 ms)
[ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms)
[ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms)
[ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms)
[ok]: ZADD XX option without key - skiplist (0 ms)
[ok]: ZADD XX existing key - skiplist (0 ms)
[ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms)
[ok]: ZADD XX updates existing elements score - skiplist (1 ms)
[ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms)
[ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms)
[ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms)
[ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms)
[ok]: ZADD XX and NX are not compatible - skiplist (0 ms)
[ok]: ZADD NX with non existing key - skiplist (1 ms)
[ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms)
[ok]: ZADD GT and NX are not compatible - skiplist (0 ms)
[ok]: SETEX - Wait for the key to expire (1100 ms)
[ok]: ZADD LT and NX are not compatible - skiplist (0 ms)
[ok]: ZADD LT and GT are not compatible - skiplist (1 ms)
[ok]: SETEX - Wrong time parameter (1 ms)
[ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms)
[ok]: PERSIST can undo an EXPIRE (1 ms)
[ok]: ZADD INCR LT/GT with inf - skiplist (1 ms)
[ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms)
[ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms)
[ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms)
[ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms)
[ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms)
[ok]: ZADD - Variadic version base case - $encoding (0 ms)
[ok]: ZADD - Return value is the number of actually added items - $encoding (0 ms)
[ok]: ZADD - Variadic version does not add nothing on single parsing err - $encoding (1 ms)
[ok]: ZADD - Variadic version will raise error on missing arg - $encoding (0 ms)
[ok]: ZINCRBY does not work variadic even if shares ZADD implementation - $encoding (0 ms)
[ok]: ZCARD basics - skiplist (0 ms)
[ok]: ZREM removes key after last element is removed - skiplist (1 ms)
[ok]: ZREM variadic version - skiplist (0 ms)
[ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms)
[ok]: ZRANGE basics - skiplist (1 ms)
[ok]: ZREVRANGE basics - skiplist (1 ms)
[ok]: ZRANK/ZREVRANK basics - skiplist (0 ms)
[ok]: ZRANK - after deletion - skiplist (0 ms)
[ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms)
[ok]: ZINCRBY - increment and decrement - skiplist (1 ms)
[ok]: ZINCRBY return value - skiplist (0 ms)
[ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms)
[ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms)
[ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms)
[ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms)
[ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms)
[ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (1 ms)
[ok]: ZLEXCOUNT advanced - skiplist (1 ms)
[ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms)
[ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms)
[ok]: ZREMRANGEBYSCORE basics - skiplist (6 ms)
[ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms)
[ok]: ZREMRANGEBYRANK basics - skiplist (3 ms)
[ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms)
[ok]: ZUNIONSTORE with empty set - skiplist (0 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms)
[ok]: ZUNIONSTORE basics - skiplist (0 ms)
[ok]: MULTI-EXEC body and script timeout (412 ms)
[ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (3 ms)
[ok]: ZUNIONSTORE with weights - skiplist (0 ms)
[ok]: ZUNION with weights - skiplist (1 ms)
[ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms)
[ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (1 ms)
[ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms)
[ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms)
[ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (1 ms)
[ok]: ZINTERSTORE basics - skiplist (0 ms)
[ok]: ZINTER basics - skiplist (0 ms)
[ok]: ZINTERCARD with illegal arguments (1 ms)
[ok]: ZINTERCARD basics - skiplist (0 ms)
[ok]: ZINTER RESP3 - skiplist (1 ms)
[ok]: ZINTERSTORE with weights - skiplist (0 ms)
[ok]: ZINTER with weights - skiplist (0 ms)
[ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms)
[ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms)
[ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms)
[ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms)
[ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms)
[ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms)
[ok]: ZINTERSTORE with NaN weights - skiplist (1 ms)
[ok]: ZDIFFSTORE basics - skiplist (0 ms)
[ok]: ZDIFF basics - skiplist (0 ms)
[ok]: ZDIFFSTORE with a regular set - skiplist (1 ms)
[ok]: ZDIFF subtracting set from itself - skiplist (0 ms)
[ok]: ZDIFF algorithm 1 - skiplist (0 ms)
[ok]: ZDIFF algorithm 2 - skiplist (1 ms)
[ok]: corrupt payload: quicklist listpack entry start with EOF (398 ms)
[ok]: Consumer group last ID propagation to slave (NOACK=1) (173 ms)
[ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (591 ms)
[14/81 done]: unit/type/hash (3 seconds)
Testing integration/psync2-reg
[ok]: Test latency events logging (3403 ms)
[ok]: LATENCY HISTORY output is ok (0 ms)
[ok]: LATENCY LATEST output is ok (1 ms)
[ok]: Crash report generated on SIGABRT (3 ms)
[ok]: corrupt payload: #3080 - ziplist (246 ms)
[ok]: client freed during loading (994 ms)
[ok]: just EXEC and script timeout (412 ms)
[ok]: exec with write commands and state change (6 ms)
[ok]: exec with read commands and stale replica state change (7 ms)
[ok]: EXEC with only read commands should not be rejected when OOM (3 ms)
[ok]: EXEC with at least one use-memory command should fail (4 ms)
[ok]: Blocking commands ignores the timeout (0 ms)
[ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (122 ms)
[ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (104 ms)
[ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (3 ms)
[ok]: MULTI propagation of PUBLISH (80 ms)
[ok]: PSYNC2: --- CYCLE 1 --- (0 ms)
[ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms)
[ok]: PSYNC2: Set #4 to replicate from #0 (0 ms)
[ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (459 ms)
[ok]: MULTI propagation of SCRIPT LOAD (101 ms)
[ok]: Crash report generated on DEBUG SEGFAULT (134 ms)
[15/81 done]: integration/logging (1 seconds)
Testing integration/psync2-pingoff
[ok]: XREAD with non empty second stream (846 ms)
[ok]: Blocking XREAD waiting new data (5 ms)
[ok]: Blocking XREAD waiting old data (4 ms)
[ok]: corrupt payload: load corrupted rdb with empty keys (244 ms)
[ok]: Shutting down master waits for replica to catch up (shutdown) (1851 ms)
[ok]: MASTER and SLAVE consistency with expire (3716 ms)
[ok]: MULTI propagation of EVAL (100 ms)
[ok]: Blocking XREAD will not reply with an empty array (87 ms)
[ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (197 ms)
[ok]: MULTI propagation of SCRIPT FLUSH (102 ms)
[ok]: Master can replicate command longer than client-query-buffer-limit on replica (124 ms)
[ok]: BLPOP: with zero timeout should block indefinitely (1006 ms)
[ok]: BLPOP: second argument is not a list (5 ms)
[ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms)
[ok]: XREAD: XADD + DEL should not awake client (5 ms)
[ok]: XREAD: XADD + DEL + LPUSH should not awake client (5 ms)
[ok]: XREAD with same stream name multiple times should work (4 ms)
[ok]: XREAD + multiple XADD inside transaction (4 ms)
[ok]: XDEL basic test (1 ms)
[ok]: Empty stream with no lastid can be rewrite into AOF correctly (165 ms)
[ok]: MULTI propagation of XREADGROUP (103 ms)
[ok]: MULTI with SAVE (1 ms)
[ok]: MULTI with SHUTDOWN (0 ms)
[ok]: corrupt payload: load corrupted rdb with empty keys (244 ms)
[ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (261 ms)
[ok]: Test RDB load info (586 ms)
[16/81 done]: unit/type/stream-cgroups (4 seconds)
Testing integration/psync2-master-restart
[ok]: MULTI with BGREWRITEAOF (210 ms)
[ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (123 ms)
[ok]: EXPIRES after AOF reload (without rewrite) (2157 ms)
[ok]: corrupt payload: listpack invalid size header (249 ms)
[ok]: intsets implementation stress testing (1394 ms)
[ok]: corrupt payload: listpack too long entry len (151 ms)
[ok]: MULTI with config set appendonly (240 ms)
[ok]: MULTI with config error (2 ms)
[17/81 done]: unit/type/set (5 seconds)
Testing integration/failover
[ok]: Stress tester for #3343-alike bugs comp: 1 (2069 ms)
[ok]: corrupt payload: listpack very long entry len (151 ms)
[ok]: PSYNC2 #3899 regression: setup (1010 ms)
[ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (123 ms)
[ok]: PSYNC2: Set #1 to replicate from #4 (0 ms)
[ok]: PIPELINING stresser (also a regression for the old epoll bug) (455 ms)
[ok]: APPEND basics (1 ms)
[ok]: APPEND basics, integer encoded values (0 ms)
[ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (123 ms)
[ok]: MULTI with FLUSHALL and AOF (20 ms)
[ok]: corrupt payload: listpack too long entry prev len (238 ms)
[ok]: failover command fails without connected replica (0 ms)
[18/81 done]: unit/multi (5 seconds)
Testing integration/redis-cli
[ok]: APPEND fuzzing (217 ms)
[ok]: SETNX against expired volatile key (2666 ms)
[ok]: Multi Part AOF can upgrade when when two redis share the same server dir (692 ms)
[ok]: GETEX EX option (1 ms)
[ok]: GETEX PX option (1 ms)
[ok]: GETEX EXAT option (0 ms)
[ok]: GETEX PXAT option (1 ms)
[ok]: GETEX PERSIST option (1 ms)
[ok]: GETEX no option (0 ms)
[ok]: GETEX syntax errors (1 ms)
[ok]: GETEX no arguments (0 ms)
[ok]: GETDEL command (1 ms)
[ok]: LTRIM stress testing - linkedlist (5230 ms)
[ok]: FLUSHDB (31 ms)
[ok]: Perform a final SAVE to leave a clean DB on disk (16 ms)
[ok]: RESET clears client state (0 ms)
[ok]: setup replication for following tests (105 ms)
[ok]: failover command fails with invalid host (1 ms)
[ok]: failover command fails with invalid port (0 ms)
[ok]: failover command fails with just force and timeout (0 ms)
[ok]: failover command fails when sent to a replica (1 ms)
[ok]: failover command fails with force without timeout (0 ms)
[ok]: RESET clears MONITOR state (4 ms)
[ok]: RESET clears and discards MULTI state (0 ms)
[ok]: RESET clears Pub/Sub state (1 ms)
[ok]: RESET clears authenticated state (0 ms)
[ok]: Subcommand syntax error crash (issue #10070) (1 ms)
[ok]: Big Hash table: SORT BY key (323 ms)
[ok]: Big Hash table: SORT BY key with limit (13 ms)
[ok]: BLPOP: timeout (1077 ms)
[ok]: BLPOP: arguments are empty (5 ms)
[ok]: PSYNC2 pingoff: setup (1006 ms)
[ok]: PSYNC2 pingoff: write and wait replication (1 ms)
[ok]: BRPOP: with single empty list argument (5 ms)
[ok]: BRPOP: with negative timeout (5 ms)
[ok]: GETDEL propagate as DEL command to replica (81 ms)
[ok]: BRPOP: with non-integer timeout (5 ms)
[ok]: EXPIRE precision is now the millisecond (2002 ms)
[ok]: corrupt payload: stream with duplicate consumers (241 ms)
[ok]: Interactive CLI: INFO response should be printed raw (64 ms)
[ok]: Replication backlog size can outgrow the backlog limit config (1184 ms)
[ok]: GETEX without argument does not propagate to replica (109 ms)
[ok]: MGET (7 ms)
[ok]: MGET against non existing key (0 ms)
[ok]: MGET against non-string key (1 ms)
[ok]: GETSET (set new value) (0 ms)
[ok]: GETSET (replace old value) (1 ms)
[ok]: MSET base case (0 ms)
[ok]: MSET/MSETNX wrong number of args (0 ms)
[ok]: MSETNX with already existent key (0 ms)
[ok]: MSETNX with not existing keys (0 ms)
[ok]: STRLEN against non-existing key (1 ms)
[ok]: STRLEN against integer-encoded value (0 ms)
[ok]: PSETEX can set sub-second expires (106 ms)
[ok]: STRLEN against plain string (0 ms)
[ok]: SETBIT against non-existing key (0 ms)
[ok]: SETBIT against string-encoded key (1 ms)
[ok]: SETBIT against integer-encoded key (0 ms)
[ok]: SETBIT against key with wrong type (1 ms)
[ok]: SETBIT with out of range bit offset (0 ms)
[ok]: SETBIT with non-bit argument (0 ms)
[ok]: Interactive CLI: Status reply (75 ms)
[ok]: Interactive CLI: Integer reply (63 ms)
[ok]: PEXPIRE can set sub-second expires (102 ms)
[ok]: Interactive CLI: Bulk reply (66 ms)
[ok]: corrupt payload: hash ziplist with duplicate records (249 ms)
[ok]: Big Hash table: SORT BY hash field (348 ms)
[ok]: Interactive CLI: Multi-bulk reply (65 ms)
[ok]: SORT GET # (1 ms)
[ok]: SORT GET <const> (0 ms)
[ok]: Multi Part AOF can handle appendfilename contains whitespaces (420 ms)
[ok]: SORT GET (key and hash) with sanity check (4 ms)
[ok]: SORT BY key STORE (0 ms)
[ok]: SORT BY hash field STORE (0 ms)
[ok]: SORT extracts STORE correctly (1 ms)
[ok]: SORT extracts multiple STORE correctly (0 ms)
[ok]: SORT DESC (0 ms)
[ok]: SORT ALPHA against integer encoded strings (1 ms)
[ok]: SORT sorted set (0 ms)
[ok]: SORT sorted set BY nosort should retain ordering (1 ms)
[ok]: SORT sorted set BY nosort + LIMIT (1 ms)
[ok]: SORT sorted set BY nosort works as expected from scripts (1 ms)
[ok]: Stress tester for #3343-alike bugs comp: 0 (826 ms)
[ok]: SORT sorted set: +inf and -inf handling (1 ms)
[ok]: SORT regression for issue #19, sorting floats (7 ms)
[ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms)
[ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms)
[ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms)
[ok]: SORT with BY <constant> and STORE should still order output (1 ms)
[ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms)
[ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms)
[ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms)
[ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms)
[ok]: SORT by nosort retains native order for lists (0 ms)
[ok]: SORT by nosort plus store retains native order for lists (1 ms)
[ok]: SORT by nosort with limit returns based on original list order (0 ms)
[ok]: SORT_RO - Successful case (0 ms)
[ok]: SORT_RO - Cannot run with STORE arg (0 ms)
[ok]: SORT speed, 100 element list BY key, 100 times (20 ms)
[ok]: XDEL fuzz test (1467 ms)
[ok]: SORT speed, 100 element list BY hash field, 100 times (15 ms)
[ok]: SORT speed, 100 element list directly, 100 times (13 ms)
[ok]: PEXPIREAT can set sub-second expires (207 ms)
[ok]: TTL returns time to live in seconds (0 ms)
[ok]: PTTL returns time to live in milliseconds (1 ms)
[ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms)
[ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms)
[ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms)
[ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms)
[ok]: SORT speed, 100 element list BY <const>, 100 times (10 ms)
[ok]: SETBIT fuzzing (309 ms)
[ok]: GETBIT against non-existing key (0 ms)
[ok]: GETBIT against string-encoded key (0 ms)
[ok]: GETBIT against integer-encoded key (1 ms)
[ok]: SETRANGE against non-existing key (1 ms)
[ok]: SETRANGE against string-encoded key (1 ms)
[ok]: SETRANGE against integer-encoded key (2 ms)
[ok]: SETRANGE against key with wrong type (1 ms)
[ok]: SETRANGE with out of range offset (0 ms)
[ok]: GETRANGE against non-existing key (0 ms)
[ok]: GETRANGE against string value (1 ms)
[ok]: GETRANGE against integer-encoded value (0 ms)
[ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (179 ms)
[ok]: corrupt payload: hash listpack with duplicate records (264 ms)
[19/81 done]: unit/sort (6 seconds)
Testing integration/redis-benchmark
[ok]: Don't rehash if redis has child process (394 ms)
[ok]: PSYNC2: Set #2 to replicate from #1 (0 ms)
[ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (173 ms)
[ok]: corrupt payload: hash listpack with duplicate records - convert (153 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: Shutting down master waits for replica timeout (1956 ms)
[ok]: Interactive CLI: Parsing quotes (450 ms)
[ok]: Non-interactive TTY CLI: Status reply (7 ms)
[ok]: Non-interactive TTY CLI: Integer reply (7 ms)
[ok]: Non-interactive TTY CLI: Bulk reply (7 ms)
[ok]: Non-interactive TTY CLI: Multi-bulk reply (7 ms)
[ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms)
[ok]: Non-interactive TTY CLI: Read last argument from pipe (20 ms)
[ok]: Process title set as expected (2 ms)
[ok]: Non-interactive TTY CLI: Read last argument from file (14 ms)
[ok]: benchmark: set,get (48 ms)
[ok]: Non-interactive TTY CLI: Escape character in JSON mode (58 ms)
[ok]: Non-interactive non-TTY CLI: Status reply (5 ms)
[ok]: benchmark: connecting using URI set,get (45 ms)
[ok]: Non-interactive non-TTY CLI: Integer reply (7 ms)
[ok]: Non-interactive non-TTY CLI: Bulk reply (7 ms)
[ok]: Non-interactive non-TTY CLI: Multi-bulk reply (6 ms)
[ok]: corrupt payload: hash ziplist uneven record count (247 ms)
[ok]: Non-interactive non-TTY CLI: Quoted input arguments (8 ms)
[20/81 done]: unit/other (6 seconds)
Testing integration/dismiss-mem
[ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (14 ms)
[ok]: benchmark: connecting using URI with authentication set,get (46 ms)
[ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (14 ms)
[ok]: Non-interactive non-TTY CLI: Read last argument from pipe (19 ms)
[ok]: Non-interactive non-TTY CLI: Read last argument from file (16 ms)
[ok]: ZDIFF fuzzing - skiplist (2915 ms)
[ok]: ZPOPMIN with the count 0 returns an empty array (1 ms)
[ok]: ZPOPMIN with negative count (0 ms)
[ok]: BRPOP: with zero timeout should block indefinitely (1009 ms)
[ok]: ZPOPMAX with the count 0 returns an empty array (1 ms)
[ok]: ZPOPMAX with negative count (0 ms)
[ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms)
[ok]: ZPOPMIN/ZPOPMAX with count - skiplist (0 ms)
[ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms)
[ok]: BRPOP: second argument is not a list (4 ms)
[ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms)
[ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (5 ms)
[ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (5 ms)
[ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (4 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (4 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (3 ms)
[ok]: Redis should actively expire keys incrementally (606 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (4 ms)
[ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms)
[ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (0 ms)
[ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms)
[ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms)
[ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (4 ms)
[ok]: failover command to specific replica works (1098 ms)
[ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (5 ms)
[ok]: ZPOP/ZMPOP against wrong type (1 ms)
[ok]: ZMPOP with illegal argument (1 ms)
[ok]: LATENCY of expire events are correctly collected (2856 ms)
[ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms)
[ok]: LATENCY DOCTOR produces some output (2 ms)
[ok]: LATENCY RESET is able to reset events (1 ms)
[ok]: LATENCY HELP should not have unexpected options (0 ms)
[ok]: GETRANGE fuzzing (641 ms)
[ok]: Extended SET can detect syntax errors (1 ms)
[ok]: Extended SET NX option (0 ms)
[ok]: Extended SET XX option (1 ms)
[ok]: Extended SET GET option (0 ms)
[ok]: Extended SET GET option with no previous value (0 ms)
[ok]: Extended SET GET option with XX (1 ms)
[ok]: Extended SET GET option with XX and no previous value (0 ms)
[ok]: Extended SET GET option with NX (1 ms)
[ok]: Extended SET GET option with NX and previous value (0 ms)
[ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms)
[ok]: Extended SET EX option (0 ms)
[ok]: Extended SET PX option (0 ms)
[ok]: Extended SET EXAT option (0 ms)
[ok]: Extended SET PXAT option (0 ms)
[ok]: Extended SET using multiple options at once (0 ms)
[ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms)
[ok]: LCS basic (1 ms)
[ok]: LCS len (0 ms)
[ok]: LCS indexes (0 ms)
[ok]: LCS indexes with match len (1 ms)
[ok]: LCS indexes with match len and minimum match len (0 ms)
[ok]: ZMPOP propagate as pop with count command to replica (43 ms)
[ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms)
[ok]: Test replication with parallel clients writing in different DBs (5182 ms)
[21/81 done]: unit/type/string (6 seconds)
Testing unit/pubsub
[ok]: corrupt payload: hash duplicate records (248 ms)
[22/81 done]: unit/latency-monitor (6 seconds)
Testing unit/pubsubshard
[ok]: SCAN regression test for issue #4906 (6254 ms)
[ok]: benchmark: full test suite (327 ms)
[ok]: Pub/Sub PING (3 ms)
[ok]: PUBLISH/SUBSCRIBE basics (4 ms)
[ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (194 ms)
[ok]: ZMPOP readraw in RESP3 (1 ms)
[ok]: PUBLISH/SUBSCRIBE with two clients (8 ms)
[ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (3 ms)
[ok]: SUBSCRIBE to one channel more than once (4 ms)
[ok]: UNSUBSCRIBE from non-subscribed channels (4 ms)
[ok]: PUBLISH/PSUBSCRIBE basics (5 ms)
[ok]: PUBLISH/PSUBSCRIBE with two clients (8 ms)
[ok]: AOF enable will create manifest file (502 ms)
[ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (3 ms)
[23/81 done]: unit/scan (7 seconds)
Testing unit/slowlog
[ok]: SPUBLISH/SSUBSCRIBE basics (4 ms)
[ok]: PUNSUBSCRIBE from non-subscribed channels (3 ms)
[ok]: NUMSUB returns numbers, not strings (#1561) (0 ms)
[ok]: SPUBLISH/SSUBSCRIBE with two clients (6 ms)
[ok]: NUMPATs returns the number of unique patterns (8 ms)
[ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (3 ms)
[ok]: SUBSCRIBE to one channel more than once (3 ms)
[ok]: Mix SUBSCRIBE and PSUBSCRIBE (3 ms)
[ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms)
[ok]: UNSUBSCRIBE from non-subscribed channels (4 ms)
[ok]: PUBSUB command basics (0 ms)
[ok]: Keyspace notifications: we receive keyspace notifications (3 ms)
[ok]: Keyspace notifications: we receive keyevent notifications (4 ms)
[ok]: Keyspace notifications: we can receive both kind of events (3 ms)
[ok]: SPUBLISH/SSUBSCRIBE with two clients (8 ms)
[ok]: Keyspace notifications: we are able to mask events (4 ms)
[ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (6 ms)
[ok]: Keyspace notifications: general events test (6 ms)
[ok]: Keyspace notifications: list events test (4 ms)
[ok]: Keyspace notifications: set events test (5 ms)
[ok]: Test child sending info (1956 ms)
[ok]: Keyspace notifications: zset events test (5 ms)
[ok]: Keyspace notifications: hash events test (4 ms)
[ok]: Keyspace notifications: stream events test (6 ms)
[ok]: corrupt payload: hash empty zipmap (246 ms)
[ok]: SLOWLOG - check that it starts with an empty log (0 ms)
[ok]: BZMPOP readraw in RESP3 (201 ms)
[ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms)
[ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1440 ms)
[ok]: script won't load anymore if it's in rdb (1 ms)
[ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (145 ms)
[ok]: Keyspace notifications: expired events (triggered expire) (207 ms)
[ok]: PSYNC2: Set #3 to replicate from #0 (2 ms)
[ok]: SLOWLOG - only logs commands taking more time than specified (200 ms)
[ok]: SLOWLOG - max entries is correctly handled (7 ms)
[ok]: SLOWLOG - GET optional argument to limit output len works (0 ms)
[ok]: SLOWLOG - RESET subcommand works (1 ms)
[ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (196 ms)
[ok]: ZMPOP readraw in RESP2 (2 ms)
[ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (147 ms)
[ok]: failover command to any replica works (671 ms)
[ok]: Keyspace notifications: expired events (background expire) (159 ms)
[ok]: First server should have role slave after SLAVEOF (103 ms)
[ok]: Keyspace notifications: evicted events (6 ms)
[ok]: With min-slaves-to-write (1,3): master should be writable (0 ms)
[ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms)
[ok]: With min-slaves-to-write function without no-write flag (0 ms)
[ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms)
[ok]: With not enough good slaves, read in Lua script is still accepted (1 ms)
[ok]: Keyspace notifications: new key test (5 ms)
[ok]: dismiss all data types memory (715 ms)
[ok]: setup replication for following tests (103 ms)
[ok]: publish message to master and receive on replica (8 ms)
[ok]: Replication backlog memory will become smaller if disconnecting with replica (311 ms)
[ok]: benchmark: multi-thread set,get (544 ms)
[ok]: SLOWLOG - logged entry sanity check (200 ms)
[ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms)
[ok]: SLOWLOG - Some commands can redact sensitive fields (0 ms)
[ok]: SLOWLOG - Rewritten commands are logged as their original command (6 ms)
[ok]: SLOWLOG - commands with too many arguments are trimmed (0 ms)
[ok]: SLOWLOG - too long arguments are trimmed (1 ms)
[24/81 done]: unit/pubsub (1 seconds)
Testing unit/scripting
[ok]: BZMPOP readraw in RESP2 (200 ms)
[ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms)
[ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms)
[ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms)
[ok]: benchmark: pipelined full set,get (111 ms)
[ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (255 ms)
[ok]: ZUNIONSTORE result is sorted (65 ms)
[ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES  (1 ms)
[ok]: ZMSCORE retrieve (0 ms)
[ok]: ZMSCORE retrieve from empty set (0 ms)
[ok]: ZMSCORE retrieve with missing member (1 ms)
[ok]: ZMSCORE retrieve single member (0 ms)
[ok]: ZMSCORE retrieve requires one or more members (1 ms)
[ok]: ZSET commands don't accept the empty strings as valid score (0 ms)
[ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms)
[ok]: PSYNC2: Partial resync after Master restart using RDB aux fields (1154 ms)
[ok]: benchmark: arbitrary command (47 ms)
[ok]: ZSCORE - listpack (20 ms)
[ok]: Shutting down master waits for replica then fails (1298 ms)
[ok]: ZMSCORE - listpack (24 ms)
[ok]: failed bgsave prevents writes (189 ms)
[ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms)
[ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms)
[ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms)
[ok]: EVAL - is Lua able to call Redis API? (0 ms)
[ok]: EVAL - Redis integer -> Lua type conversion (0 ms)
[ok]: EVAL - Redis bulk -> Lua type conversion (1 ms)
[ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms)
[ok]: EVAL - Redis status reply -> Lua type conversion (0 ms)
[ok]: EVAL - Redis error reply -> Lua type conversion (1 ms)
[ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms)
[ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms)
[ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms)
[ok]: EVAL - Scripts can't run blpop command (0 ms)
[ok]: EVAL - Scripts can't run brpop command (0 ms)
[ok]: EVAL - Scripts can't run brpoplpush command (1 ms)
[ok]: EVAL - Scripts can't run blmove command (0 ms)
[ok]: EVAL - Scripts can't run bzpopmin command (0 ms)
[ok]: EVAL - Scripts can't run bzpopmax command (0 ms)
[ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms)
[ok]: EVAL - Scripts can run non-deterministic commands (0 ms)
[ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms)
[ok]: Redis should lazy expire keys (1004 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms)
[ok]: EVAL - JSON numeric decoding (0 ms)
[ok]: EVAL - JSON string decoding (0 ms)
[ok]: EVAL - cmsgpack can pack double? (1 ms)
[ok]: EVAL - cmsgpack can pack negative int64? (0 ms)
[ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms)
[ok]: EVAL - Numerical sanity check from bitop (0 ms)
[ok]: EVAL - Verify minimal bitop functionality (0 ms)
[ok]: EVAL - Able to parse trailing comments (0 ms)
[ok]: EVAL_RO - Successful case (0 ms)
[ok]: EVAL_RO - Cannot run write commands (1 ms)
[ok]: redis.sha1hex() implementation (0 ms)
[ok]: Globals protection reading an undeclared global variable (0 ms)
[ok]: Globals protection setting an undeclared global* (0 ms)
[ok]: Test an example script DECR_IF_GT (0 ms)
[ok]: ZSCORE after a DEBUG RELOAD - listpack (36 ms)
[ok]: ZSET sorting stresser - listpack (20 ms)
[ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms)
[ok]: benchmark: keyspace length (100 ms)
[ok]: benchmark: clients idle mode should return error when reached maxclients limit (15 ms)
[ok]: BRPOP: timeout (1093 ms)
[ok]: BRPOP: arguments are empty (6 ms)
[ok]: BLMPOP_LEFT: with single empty list argument (5 ms)
[ok]: BLMPOP_LEFT: with negative timeout (3 ms)
[ok]: BLMPOP_LEFT: with non-integer timeout (4 ms)
[25/81 done]: integration/rdb (7 seconds)
Testing unit/functions
[ok]: failover to a replica with force works (459 ms)
[ok]: benchmark: specific tls-ciphers (103 ms)
[ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (258 ms)
[ok]: benchmark: tls connecting using URI with authentication set,get (57 ms)
[ok]: Dumping an RDB - functions only: no (1272 ms)
[ok]: SLOWLOG - can clean older entries (202 ms)
[ok]: FUNCTION - Basic usage (1 ms)
[ok]: FUNCTION - Load with unknown argument (0 ms)
[ok]: FUNCTION - Create an already exiting library raise error (0 ms)
[ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms)
[ok]: FUNCTION - Create a library with wrong name format (0 ms)
[ok]: FUNCTION - Create library with unexisting engine (0 ms)
[ok]: FUNCTION - Test uncompiled script (0 ms)
[ok]: FUNCTION - test replace argument (0 ms)
[ok]: FUNCTION - test function case insensitive (0 ms)
[ok]: FUNCTION - test replace argument with failure keeps old libraries (1 ms)
[ok]: FUNCTION - test function delete (0 ms)
[ok]: FUNCTION - test fcall bad arguments (0 ms)
[ok]: FUNCTION - test fcall bad number of keys arguments (0 ms)
[ok]: FUNCTION - test fcall negative number of keys (1 ms)
[ok]: FUNCTION - test delete on not exiting library (0 ms)
[ok]: FUNCTION - test function kill when function is not running (0 ms)
[ok]: FUNCTION - test wrong subcommand (0 ms)
[ok]: FUNCTION - test loading from rdb (24 ms)
[ok]: dismiss client output buffer (521 ms)
[ok]: FUNCTION - test debug reload different options (28 ms)
[ok]: benchmark: specific tls-ciphersuites (92 ms)
[ok]: FUNCTION - test debug reload with nosave and noflush (15 ms)
[ok]: FUNCTION - test flushall and flushdb do not clean functions (14 ms)
[ok]: FUNCTION - test function dump and restore (0 ms)
[ok]: FUNCTION - test function dump and restore with flush argument (0 ms)
[ok]: FUNCTION - test function dump and restore with append argument (1 ms)
[ok]: FUNCTION - test function dump and restore with replace argument (0 ms)
[ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms)
[ok]: FUNCTION - test function restore with wrong number of arguments (0 ms)
[ok]: FUNCTION - test fcall_ro with write command (0 ms)
[ok]: FUNCTION - test fcall_ro with read only commands (0 ms)
[ok]: FUNCTION - test keys and argv (0 ms)
[ok]: FUNCTION - test command get keys on fcall (0 ms)
[ok]: FUNCTION - test command get keys on fcall_ro (0 ms)
[ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (256 ms)
[26/81 done]: integration/redis-benchmark (2 seconds)
Testing unit/maxmemory
[ok]: PSYNC2 #3899 regression: kill first replica (0 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: dismiss client query buffer (208 ms)
[ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1233 ms)
[ok]: Shutting down master waits for replica then aborted (550 ms)
[27/81 done]: integration/shutdown (8 seconds)
Testing unit/introspection
[ok]: EVAL does not leak in the Lua stack (528 ms)
[ok]: Call Redis command with many args from Lua (issue #1764) (1 ms)
[ok]: Number conversion precision test (issue #1118) (0 ms)
[ok]: String containing number precision test (regression of issue #1118) (1 ms)
[ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms)
[ok]: Scripts can handle commands with incorrect arity (1 ms)
[ok]: Correct handling of reused argv (issue #1939) (0 ms)
[ok]: Functions in the Redis namespace are able to report errors (0 ms)
[ok]: CLUSTER RESET can not be invoke from within a script (1 ms)
[ok]: Script with RESP3 map (1 ms)
[28/81 done]: unit/pubsubshard (2 seconds)
Testing unit/introspection-2
[ok]: PSYNC2: cluster is consistent after failover (1 ms)
[ok]: Script return recursive object (78 ms)
[ok]: Script check unpack with massive arguments (4 ms)
[ok]: Script read key with expiration set (0 ms)
[ok]: Script del key with expiration set (0 ms)
[ok]: Script ACL check (2 ms)
[ok]: Binary code loading failed (0 ms)
[ok]: Try trick global protection 1 (1 ms)
[ok]: Try trick global protection 2 (0 ms)
[ok]: Try trick global protection 3 (1 ms)
[ok]: Try trick global protection 4 (0 ms)
[ok]: Try trick readonly table on redis table (0 ms)
[ok]: Try trick readonly table on json table (1 ms)
[ok]: Try trick readonly table on cmsgpack table (0 ms)
[ok]: Try trick readonly table on bit table (0 ms)
[ok]: Test loadfile are not available (1 ms)
[ok]: Test dofile are not available (0 ms)
[ok]: Test print are not available (0 ms)
[ok]: SLOWLOG - can be disabled (401 ms)
[ok]: SLOWLOG - count must be >= -1 (0 ms)
[ok]: SLOWLOG - get all slow logs (1 ms)
[ok]: PING (0 ms)
[ok]: CLIENT LIST (0 ms)
[ok]: CLIENT LIST with IDs (0 ms)
[ok]: CLIENT INFO (0 ms)
[ok]: CLIENT KILL with illegal arguments (1 ms)
[ok]: CLIENT KILL SKIPME YES/NO will kill all clients (16 ms)
[ok]: MONITOR can log executed commands (4 ms)
[ok]: MONITOR can log commands issued by the scripting engine (4 ms)
[ok]: Dumping an RDB - functions only: yes (456 ms)
[ok]: MONITOR supports redacting command arguments (4 ms)
[ok]: corrupt payload: fuzzer findings - hash crash (243 ms)
[ok]: MONITOR correctly handles multi-exec cases (5 ms)
[ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms)
[ok]: CLIENT LIST shows empty fields for unassigned names (0 ms)
[ok]: CLIENT SETNAME does not accept spaces (0 ms)
[ok]: CLIENT SETNAME can assign a name to this connection (1 ms)
[ok]: CLIENT SETNAME can change the name of an existing connection (0 ms)
[ok]: After CLIENT SETNAME, connection can still be closed (4 ms)
[ok]: eviction due to output buffers of many MGET clients, client eviction: false (122 ms)
[ok]: ziplist implementation: value encoding and backlink (2416 ms)
[ok]: FUNCTION - test function kill (407 ms)
[ok]: failover with timeout aborts if replica never catches up (609 ms)
[ok]: Scan mode (79 ms)
[29/81 done]: unit/slowlog (1 seconds)
Testing unit/limits
[ok]: failovers can be aborted (55 ms)
[ok]: corrupt payload: fuzzer findings - uneven entry count in hash (244 ms)
Waiting for process 3812 to exit...
[ok]: EXPIRE should not resurrect keys (issue #1026) (1004 ms)
[ok]: eviction due to input buffer of a dead client, client eviction: false (297 ms)
[ok]: 5 keys in, 5 keys out (1 ms)
[ok]: EXPIRE with empty string as TTL should report an error (1 ms)
[ok]: SET with EX with big integer should report an error (0 ms)
[ok]: SET with EX with smallest integer should report an error (0 ms)
[ok]: GETEX with big integer should report an error (1 ms)
[ok]: GETEX with smallest integer should report an error (0 ms)
[ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms)
[ok]: PEXPIRE with big integer overflow when basetime is added (0 ms)
[ok]: EXPIRE with big negative integer (0 ms)
[ok]: PEXPIREAT with big integer works (0 ms)
[ok]: PEXPIREAT with big negative integer works (0 ms)
[ok]: AOF rewrite doesn't open new aof when AOF turn off (530 ms)
[ok]: dismiss replication backlog (584 ms)
[ok]: AOF fsync always barrier issue (5697 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1008 ms)
[ok]: BLMPOP_LEFT: second argument is not a list (4 ms)
[ok]: FUNCTION - test script kill not working on function (409 ms)
[30/81 done]: integration/dismiss-mem (2 seconds)
Testing unit/obuf-limits
[ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (269 ms)
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL (408 ms)
[ok]: MASTER and SLAVE dataset should be identical after complex ops (5188 ms)
[ok]: failover aborts if target rejects sync request (468 ms)
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (45 ms)
[ok]: CONFIG SET client-output-buffer-limit (1 ms)
[ok]: AOF enable/disable auto gc (278 ms)
[ok]: Timedout script does not cause a false dead client (42 ms)
[ok]: GETEX should not append to AOF (0 ms)
[ok]: eviction due to output buffers of pubsub, client eviction: false (371 ms)
[ok]: Timedout script link is still usable after Lua returns (56 ms)
[ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (246 ms)
[ok]: eviction due to output buffers of many MGET clients, client eviction: true (105 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (1 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1573 ms)
[ok]: AOF can produce consecutive sequence number after reload (205 ms)
[ok]: FUNCTION - test function kill not working on eval (408 ms)
[ok]: FUNCTION - test function flush (1 ms)
[ok]: FUNCTION - test function wrong argument (0 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms)
[ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms)
[31/81 done]: integration/replication-2 (9 seconds)
Testing unit/bitops
[ok]: Unknown command: Server should have logged an error (3 ms)
[ok]: corrupt payload: fuzzer findings - empty intset (248 ms)
[ok]: BITCOUNT returns 0 against non existing key (1 ms)
[ok]: BITCOUNT returns 0 with out of range indexes (0 ms)
[ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms)
[ok]: BITCOUNT against test vector #1 (0 ms)
[ok]: BITCOUNT against test vector #2 (1 ms)
[ok]: BITCOUNT against test vector #3 (0 ms)
[ok]: BITCOUNT against test vector #4 (1 ms)
[ok]: BITCOUNT against test vector #5 (0 ms)
[ok]: eviction due to input buffer of a dead client, client eviction: true (298 ms)
[ok]: AOF+LMPOP/BLMPOP: pop elements from the list (107 ms)
[ok]: Check if maxclients works refusing connections (947 ms)
[ok]: AOF enable during BGSAVE will not write data util AOFRW finish (353 ms)
[ok]: Before the replica connects we issue two EVAL commands (1 ms)
[ok]: BITCOUNT fuzzing without start/end (165 ms)
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1877 ms)
[ok]: CONFIG save params special case handled properly (1237 ms)
[ok]: eviction due to output buffers of pubsub, client eviction: true (160 ms)
[ok]: CONFIG sanity (22 ms)
[ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (260 ms)
[32/81 done]: unit/limits (1 seconds)
Testing unit/bitfield
[ok]: Connect a replica to the master instance (104 ms)
[ok]: Replication of script multiple pushes to list with BLPOP (4 ms)
[ok]: Lua scripts using SELECT are replicated correctly (1 ms)
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (128 ms)
[ok]: Connect a replica to the master instance (102 ms)
[ok]: FUNCTION - creation is replicated to replica (0 ms)
[ok]: FUNCTION - call on replica (0 ms)
[ok]: FUNCTION - restore is replicated to replica (1 ms)
[ok]: FUNCTION - delete is replicated to replica (1 ms)
[ok]: FUNCTION - flush is replicated to replica (0 ms)
[ok]: BITFIELD signed SET and GET basics (0 ms)
[ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (5 ms)
[ok]: BITFIELD unsigned SET and GET basics (0 ms)
[ok]: BITFIELD #<idx> form (1 ms)
[ok]: BITFIELD basic INCRBY form (0 ms)
[ok]: BITFIELD chaining of multiple commands (1 ms)
[ok]: BITFIELD unsigned overflow wrap (0 ms)
[ok]: BITFIELD unsigned overflow sat (1 ms)
[ok]: BITFIELD signed overflow wrap (0 ms)
[ok]: BITFIELD signed overflow sat (1 ms)
[ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6284 ms)
[ok]: Without maxmemory small integers are shared (1 ms)
[ok]: With maxmemory and non-LRU policy integers are still shared (0 ms)
[ok]: With maxmemory and LRU policy integers are not shared (1 ms)
[ok]: Disconnecting the replica from master instance (103 ms)
[ok]: FUNCTION - test replication to replica on rdb phase (0 ms)
[ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms)
[ok]: FUNCTION - create on read only replica (0 ms)
[ok]: FUNCTION - delete on read only replica (1 ms)
[ok]: FUNCTION - function effect is replicated to replica (7 ms)
[ok]: FUNCTION - modify key space of read only replica (0 ms)
[ok]: BLMPOP_LEFT: timeout (1090 ms)
[ok]: BLMPOP_LEFT: arguments are empty (7 ms)
[ok]: BLMPOP_RIGHT: with single empty list argument (6 ms)
[ok]: BLMPOP_RIGHT: with negative timeout (5 ms)
[ok]: BLMPOP_RIGHT: with non-integer timeout (5 ms)
[ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (266 ms)
[ok]: BITCOUNT fuzzing with start/end (329 ms)
[ok]: BITCOUNT with start, end (1 ms)
[ok]: BITCOUNT syntax error #1 (0 ms)
[ok]: BITCOUNT syntax error #2 (0 ms)
[ok]: BITCOUNT regression test for github issue #582 (0 ms)
[ok]: BITCOUNT misaligned prefix (0 ms)
[ok]: CONFIG REWRITE sanity (282 ms)
[ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms)
[ok]: BITOP NOT (empty string) (0 ms)
Waiting for process 3812 to exit...
[ok]: BITOP NOT (known string) (1 ms)
[ok]: BITOP where dest and target are the same key (0 ms)
[ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms)
[ok]: BITOP missing key is considered a stream of zero (0 ms)
[ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms)
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (221 ms)
[ok]: ZSETs skiplist implementation backlink consistency test - listpack (27 ms)
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (158 ms)
[ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (132 ms)
[ok]: BITFIELD overflow detection fuzzing (304 ms)
[ok]: With min-slaves-to-write: master not writable with lagged slave (2752 ms)
[ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (331 ms)
[33/81 done]: integration/failover (5 seconds)
Testing unit/geo
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (336 ms)
[ok]: AOF will trigger limit when AOFRW fails many times (775 ms)
[ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (5 ms)
[ok]: BITOP and fuzzing (500 ms)
[ok]: GEO with wrong type src key (1 ms)
[ok]: GEO with non existing src key (0 ms)
[ok]: GEO BYLONLAT with empty search (0 ms)
[ok]: GEO BYMEMBER with non existing member (1 ms)
[ok]: GEOADD create (0 ms)
[ok]: GEOADD update (0 ms)
[ok]: GEOADD update with CH option (0 ms)
[ok]: GEOADD update with NX option (1 ms)
[ok]: GEOADD update with XX option (0 ms)
[ok]: GEOADD update with CH NX option (0 ms)
[ok]: GEOADD update with CH XX option (0 ms)
[ok]: GEOADD update with XX NX option will return syntax error (1 ms)
[ok]: GEOADD update with invalid option (0 ms)
[ok]: GEOADD invalid coordinates (0 ms)
[ok]: GEOADD multi add (0 ms)
[ok]: Check geoset values (0 ms)
[ok]: GEORADIUS simple (sorted) (1 ms)
[ok]: GEOSEARCH simple (sorted) (0 ms)
[ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms)
[ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms)
[ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms)
[ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (1 ms)
[ok]: GEOSEARCH with STOREDIST option (0 ms)
[ok]: GEORADIUS withdist (sorted) (1 ms)
[ok]: GEOSEARCH withdist (sorted) (0 ms)
[ok]: GEORADIUS with COUNT (0 ms)
[ok]: GEORADIUS with ANY not sorted by default (1 ms)
[ok]: GEORADIUS with ANY sorted by ASC (0 ms)
[ok]: GEORADIUS with ANY but no COUNT (0 ms)
[ok]: GEORADIUS with COUNT but missing integer argument (0 ms)
[ok]: GEORADIUS with COUNT DESC (1 ms)
[ok]: GEORADIUS HUGE, issue #2767 (0 ms)
[ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms)
[ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms)
[ok]: GEORADIUSBYMEMBER crossing pole search (0 ms)
[ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms)
[ok]: GEOSEARCH vs GEORADIUS (1 ms)
[ok]: GEOSEARCH non square, long and narrow (0 ms)
[ok]: GEOSEARCH corner point test (1 ms)
[ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms)
[ok]: GEOHASH is able to return geohash strings (0 ms)
[ok]: GEOPOS simple (1 ms)
[ok]: GEOPOS missing element (0 ms)
[ok]: GEODIST simple & unit (0 ms)
[ok]: GEODIST missing elements (1 ms)
[ok]: GEORADIUS STORE option: syntax error (0 ms)
[ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms)
[ok]: GEORANGE STORE option: incompatible options (1 ms)
[ok]: GEORANGE STORE option: plain usage (0 ms)
[ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms)
[ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms)
[ok]: GEORANGE STOREDIST option: plain usage (1 ms)
[ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms)
[ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms)
[ok]: GEOSEARCH the box spans -180° or 180° (0 ms)
[ok]: BITFIELD overflow wrap fuzzing (387 ms)
[ok]: BITFIELD regression for #3221 (0 ms)
[ok]: BITFIELD regression for #3564 (2 ms)
[ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (274 ms)
[ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (191 ms)
[ok]: Slave is able to evict keys created in writable slaves (6002 ms)
[ok]: Slave is able to detect timeout during handshake (2 ms)
[ok]: Slave should be able to synchronize with the master (102 ms)
[ok]: Connecting as a replica (2147 ms)
[ok]: Writable replica doesn't return expired keys (109 ms)
[ok]: PSYNC2 pingoff: pause replica and promote it (5011 ms)
[ok]: PFCOUNT updates cache on readonly replica (8 ms)
[ok]: PFCOUNT doesn't use expired key on readonly replica (24 ms)
[ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (298 ms)
[ok]: BITOP or fuzzing (398 ms)
[ok]: ZSETs ZRANK augmented skip list stress testing - listpack (860 ms)
[ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (11 ms)
[ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (6 ms)
[ok]: First server should have role slave after SLAVEOF (113 ms)
[ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (7 ms)
[ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (11 ms)
[ok]: BZPOPMIN with same key multiple times should work (6 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (7 ms)
[ok]: BZPOPMIN with variadic ZADD (6 ms)
[ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1009 ms)
[ok]: BLMPOP_RIGHT: second argument is not a list (20 ms)
[ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (429 ms)
[ok]: Generate timestamp annotations in AOF (469 ms)
[ok]: LTRIM stress testing - ziplist (5457 ms)
[ok]: CONFIG REWRITE handles save and shutdown properly (1118 ms)
[ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9280 ms)
[ok]: CONFIG SET with multiple args (24 ms)
[ok]: CONFIG SET rollback on set error (2 ms)
[skip]: CONFIG SET rollback on apply error
[ok]: CONFIG SET duplicate configs (7 ms)
[ok]: CONFIG SET set immutable (0 ms)
[ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2256 ms)
[ok]: CONFIG GET hidden configs (15 ms)
[ok]: CONFIG GET multiple args (1 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (2 ms)
[ok]: Successfully load AOF which has timestamp annotations inside (10 ms)
[ok]: corrupt payload: fuzzer findings - stream bad lp_count (303 ms)
[34/81 done]: unit/type/list-2 (11 seconds)
Testing unit/memefficiency
[ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (411 ms)
[ok]: Connect a replica to the master instance (103 ms)
[ok]: redis-server command line arguments - error cases (80 ms)
[ok]: Redis.replicate_commands() can be issued anywhere now (1 ms)
[ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms)
[ok]: Redis.set_repl() don't accept invalid values (4 ms)
[ok]: Test selective replication of certain Redis commands from Lua (2 ms)
[ok]: PRNG is seeded randomly for command replication (1 ms)
[ok]: Using side effects is not a problem with command replication (1 ms)
[ok]: BITFIELD: setup slave (127 ms)
[ok]: BITFIELD: write on master, read on slave (10 ms)
[ok]: BITFIELD_RO fails when write option is used (0 ms)
[ok]: PSYNC2: Full resync after Master restart when too many key expired (2055 ms)
[ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (175 ms)
[ok]: All TTL in commands are propagated as absolute timestamp in replication stream (94 ms)
[ok]: LIBRARIES - test shared function can access default globals (1 ms)
[ok]: LIBRARIES - usage and code sharing (4 ms)
[ok]: LIBRARIES - test registration failure revert the entire load (1 ms)
[ok]: LIBRARIES - test registration function name collision (3 ms)
[ok]: LIBRARIES - test registration function name collision on same library (0 ms)
[ok]: LIBRARIES - test registration with no argument (1 ms)
[ok]: LIBRARIES - test registration with only name (0 ms)
[ok]: LIBRARIES - test registration with to many arguments (0 ms)
[ok]: LIBRARIES - test registration with no string name (0 ms)
[ok]: LIBRARIES - test registration with wrong name format (0 ms)
[ok]: LIBRARIES - test registration with empty name (0 ms)
[ok]: LIBRARIES - math.random from function load (0 ms)
[ok]: LIBRARIES - redis.call from function load (1 ms)
[ok]: LIBRARIES - redis.setresp from function load (0 ms)
[ok]: LIBRARIES - redis.set_repl from function load (0 ms)
[ok]: LIBRARIES - malicious access test (2 ms)
[ok]: BITOP xor fuzzing (562 ms)
[ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3008 ms)
[ok]: LIBRARIES - delete removed all functions on library (0 ms)
[ok]: LIBRARIES - register function inside a function (0 ms)
[ok]: LIBRARIES - register library with no functions (1 ms)
[ok]: Set instance A as slave of B (104 ms)
[ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (468 ms)
[ok]: INCRBYFLOAT replication, should not remove expire (8 ms)
[ok]: GETSET replication (2 ms)
[ok]: First server should have role slave after REPLICAOF (3 ms)
[ok]: BRPOPLPUSH replication, when blocking against empty list (11 ms)
[ok]: redis-server command line arguments - allow passing option name and option value in the same arg (287 ms)
[ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (41 ms)
[ok]: corrupt payload: fuzzer findings - stream integrity check issue (209 ms)
[35/81 done]: unit/bitfield (2 seconds)
Testing unit/hyperloglog
[ok]: Detect write load to master (1012 ms)
[ok]: BITOP NOT fuzzing (239 ms)
[ok]: BITOP with integer encoded source objects (1 ms)
[ok]: BITOP with non string source key (1 ms)
[ok]: BITOP with empty string after non empty string (issue #529) (0 ms)
[ok]: BITPOS bit=0 with empty key returns 0 (0 ms)
[ok]: BITPOS bit=1 with empty key returns -1 (1 ms)
[ok]: BITPOS bit=0 with string less than 1 word works (0 ms)
[ok]: BITPOS bit=1 with string less than 1 word works (0 ms)
[ok]: BITPOS bit=0 starting at unaligned address (0 ms)
[ok]: BITPOS bit=1 starting at unaligned address (0 ms)
[ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms)
[ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms)
[ok]: BITPOS bit=1 returns -1 if string is all 0 bits (5 ms)
[ok]: BITPOS bit=0 works with intervals (1 ms)
[ok]: BITPOS bit=1 works with intervals (1 ms)
[ok]: BITPOS bit=0 changes behavior if end is given (1 ms)
[ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms)
[36/81 done]: integration/psync2-master-restart (7 seconds)
Testing unit/lazyfree
[ok]: Make the old master a replica of the new one and check conditions (1015 ms)
[ok]: redis-server command line arguments - wrong usage that we support anyway (205 ms)
[ok]: SET command will remove expire (11 ms)
[ok]: SET - use KEEPTTL option, TTL should not be removed (5 ms)
Waiting for process 3812 to exit...
[ok]: corrupt payload: fuzzer findings - infinite loop (277 ms)
[37/81 done]: integration/replication-3 (11 seconds)
Testing unit/wait
[ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (396 ms)
[ok]: LIBRARIES - load timeout (502 ms)
[ok]: redis-server command line arguments - allow option value to use the `--` prefix (202 ms)
[ok]: LIBRARIES - verify global protection on the load run (1 ms)
[ok]: Memory efficiency with values in range 32 (566 ms)
[ok]: LIBRARIES - named arguments (0 ms)
[ok]: LIBRARIES - named arguments, bad function name (0 ms)
[ok]: LIBRARIES - named arguments, bad callback type (0 ms)
[ok]: LIBRARIES - named arguments, bad description (0 ms)
[ok]: LIBRARIES - named arguments, unknown argument (1 ms)
[ok]: LIBRARIES - named arguments, missing function name (0 ms)
[ok]: LIBRARIES - named arguments, missing callback (0 ms)
[ok]: FUNCTION - test function restore with function name collision (2 ms)
[ok]: FUNCTION - test function list with code (1 ms)
[ok]: FUNCTION - test function list with pattern (0 ms)
[ok]: FUNCTION - test function list wrong argument (0 ms)
[ok]: FUNCTION - test function list with bad argument to library name (0 ms)
[ok]: Replication of an expired key does not delete the expired key (1038 ms)
[ok]: FUNCTION - test function list withcode multiple times (1 ms)
[ok]: FUNCTION - test function list libraryname multiple times (0 ms)
[ok]: FUNCTION - verify OOM on function load and function restore (1 ms)
[ok]: FUNCTION - verify allow-omm allows running any command (0 ms)
[ok]: BZPOPMIN with zero timeout should block indefinitely (1008 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (15 ms)
[ok]: AOF rewrite during write load: RDB preamble=yes (11356 ms)
[ok]: BZMPOP_MIN with variadic ZADD (7 ms)
[ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (171 ms)
[ok]: BLMPOP_RIGHT: timeout (1103 ms)
[ok]: BLMPOP_RIGHT: arguments are empty (5 ms)
[ok]: BLPOP inside a transaction (11 ms)
[ok]: BLMPOP_LEFT inside a transaction (9 ms)
[ok]: BITPOS bit=1 fuzzy testing using SETBIT (425 ms)
[ok]: Piping raw protocol (1508 ms)
[ok]: UNLINK can reclaim memory in background (389 ms)
[ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (332 ms)
[ok]: Truncate AOF to specific timestamp (896 ms)
[ok]: test RESP2/2 big number protocol parsing (0 ms)
[ok]: test RESP2/2 malformed big number protocol parsing (1 ms)
[ok]: test RESP2/2 map protocol parsing (1 ms)
[ok]: test RESP2/2 set protocol parsing (1 ms)
[ok]: test RESP2/2 double protocol parsing (0 ms)
[ok]: test RESP2/2 null protocol parsing (1 ms)
[ok]: test RESP2/2 verbatim protocol parsing (0 ms)
[ok]: test RESP2/2 true protocol parsing (1 ms)
[ok]: test RESP2/2 false protocol parsing (1 ms)
[ok]: test RESP2/3 big number protocol parsing (0 ms)
[ok]: test RESP2/3 malformed big number protocol parsing (1 ms)
[ok]: test RESP2/3 map protocol parsing (1 ms)
[ok]: test RESP2/3 set protocol parsing (1 ms)
[ok]: Options -X with illegal argument (85 ms)
[ok]: test RESP2/3 double protocol parsing (0 ms)
[ok]: test RESP2/3 null protocol parsing (1 ms)
[ok]: test RESP2/3 verbatim protocol parsing (1 ms)
[ok]: test RESP2/3 true protocol parsing (1 ms)
[ok]: test RESP2/3 false protocol parsing (0 ms)
[ok]: test RESP3/2 big number protocol parsing (1 ms)
[ok]: test RESP3/2 malformed big number protocol parsing (1 ms)
[ok]: test RESP3/2 map protocol parsing (1 ms)
[ok]: test RESP3/2 set protocol parsing (1 ms)
[ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (335 ms)
[ok]: test RESP3/2 double protocol parsing (1 ms)
[ok]: test RESP3/2 null protocol parsing (0 ms)
[ok]: test RESP3/2 verbatim protocol parsing (1 ms)
[ok]: test RESP3/2 true protocol parsing (1 ms)
[ok]: test RESP3/2 false protocol parsing (1 ms)
[ok]: test RESP3/3 big number protocol parsing (0 ms)
[ok]: test RESP3/3 malformed big number protocol parsing (0 ms)
[ok]: corrupt payload: OOM in rdbGenericLoadStringObject (264 ms)
[ok]: test RESP3/3 map protocol parsing (1 ms)
[ok]: test RESP3/3 set protocol parsing (0 ms)
[ok]: test RESP3/3 double protocol parsing (1 ms)
[ok]: test RESP3/3 null protocol parsing (0 ms)
[ok]: test RESP3/3 verbatim protocol parsing (1 ms)
[ok]: test RESP3/3 true protocol parsing (1 ms)
[ok]: test RESP3/3 false protocol parsing (0 ms)
[ok]: test resp3 attribute protocol parsing (0 ms)
[ok]: FUNCTION - wrong flags type named arguments (1 ms)
[ok]: FUNCTION - wrong flag type (1 ms)
[ok]: FUNCTION - unknown flag (0 ms)
[ok]: FUNCTION - write script on fcall_ro (0 ms)
[ok]: FUNCTION - write script with no-writes flag (2 ms)
[ok]: FUNCTION - deny oom (1 ms)
[ok]: BLMPOP propagate as pop with count command to replica (178 ms)
[ok]: LPUSHX, RPUSHX - generic (1 ms)
[ok]: FUNCTION - deny oom on no-writes function (2 ms)
[ok]: LPUSHX, RPUSHX - linkedlist (1 ms)
[ok]: FUNCTION - allow stale (2 ms)
[ok]: FUNCTION - redis version api (0 ms)
[ok]: LINSERT - linkedlist (3 ms)
[ok]: FUNCTION - function stats (1 ms)
[ok]: LPUSHX, RPUSHX - ziplist (2 ms)
[ok]: LINSERT - ziplist (2 ms)
[ok]: LINSERT raise error on bad syntax (0 ms)
[ok]: FUNCTION - function stats reloaded correctly from rdb (15 ms)
[ok]: FUNCTION - function stats delete library (1 ms)
[ok]: Script block the time during execution (11 ms)
[ok]: Script delete the expired key (4 ms)
[ok]: FUNCTION - test function stats on loading failure (5 ms)
[ok]: FUNCTION - function stats cleaned after flush (0 ms)
[ok]: FUNCTION - function test empty engine (0 ms)
[ok]: FUNCTION - function test unknown metadata value (0 ms)
[ok]: FUNCTION - function test no name (0 ms)
[ok]: FUNCTION - function test multiple names (0 ms)
[ok]: FUNCTION - function test name with quotes (1 ms)
[ok]: FUNCTION - trick global protection 1 (0 ms)
[ok]: FUNCTION - test getmetatable on script load (1 ms)
[ok]: DUMP RESTORE with -x option (125 ms)
[ok]: LINDEX consistency test - quicklist (77 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (1 ms)
[ok]: LINDEX random access - quicklist (62 ms)
[ok]: Setup slave (109 ms)
[ok]: WAIT should acknowledge 1 additional copy of the data (1 ms)
[ok]: Memory efficiency with values in range 64 (527 ms)
[ok]: DUMP RESTORE with -X option (106 ms)
[ok]: HyperLogLog self test passes (651 ms)
[ok]: PFADD without arguments creates an HLL value (1 ms)
[ok]: Approximated cardinality after creation is zero (0 ms)
[ok]: PFADD returns 1 when at least 1 reg was modified (0 ms)
[ok]: PFADD returns 0 when no reg was modified (0 ms)
[ok]: PFADD works with empty string (regression) (1 ms)
[ok]: PFCOUNT returns approximated cardinality of set (0 ms)
[ok]: BRPOPLPUSH replication, list exists (1009 ms)
[ok]: BLMOVE (left, left) replication, when blocking against empty list (10 ms)
[38/81 done]: unit/functions (5 seconds)
Testing unit/pause
[ok]: FLUSHDB ASYNC can reclaim memory in background (346 ms)
[ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (108 ms)
[ok]: BITPOS bit=0 fuzzy testing using SETBIT (419 ms)
[39/81 done]: integration/redis-cli (7 seconds)
Testing unit/querybuf
[ok]: First server should have role slave after SLAVEOF (1 ms)
[ok]: Script - disallow write on OOM (2 ms)
[ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms)
[ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms)
[ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms)
[ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms)
[ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (4 ms)
[ok]: EVAL - is Lua able to call Redis API? (0 ms)
[ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms)
[ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms)
[ok]: EVALSHA - Do we get an error on invalid SHA1? (1 ms)
[ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms)
[ok]: corrupt payload: fuzzer findings - OOM in dictExpand (375 ms)
[ok]: EVAL - Redis integer -> Lua type conversion (0 ms)
[ok]: EVAL - Redis bulk -> Lua type conversion (0 ms)
[ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms)
[ok]: EVAL - Redis status reply -> Lua type conversion (0 ms)
[ok]: EVAL - Redis error reply -> Lua type conversion (1 ms)
[ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms)
[ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms)
[ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms)
[ok]: EVAL - Scripts can't run blpop command (0 ms)
[ok]: EVAL - Scripts can't run brpop command (0 ms)
[ok]: EVAL - Scripts can't run brpoplpush command (0 ms)
[ok]: lazy free a stream with all types of metadata (109 ms)
[ok]: EVAL - Scripts can't run blmove command (0 ms)
[ok]: EVAL - Scripts can't run bzpopmin command (0 ms)
[ok]: EVAL - Scripts can't run bzpopmax command (0 ms)
[ok]: lazy free a stream with deleted cgroup (1 ms)
[ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms)
[ok]: EVAL - Scripts can run non-deterministic commands (0 ms)
[ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms)
[ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms)
[ok]: EVAL - JSON numeric decoding (0 ms)
[ok]: EVAL - JSON string decoding (0 ms)
[ok]: EVAL - cmsgpack can pack double? (0 ms)
[ok]: EVAL - cmsgpack can pack negative int64? (1 ms)
[ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms)
[ok]: EVAL - Numerical sanity check from bitop (0 ms)
[ok]: EVAL - Verify minimal bitop functionality (1 ms)
[ok]: EVAL - Able to parse trailing comments (0 ms)
[ok]: EVAL_RO - Successful case (0 ms)
[ok]: EVAL_RO - Cannot run write commands (1 ms)
[ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (1 ms)
[ok]: LINDEX consistency test - quicklist (135 ms)
[ok]: SCRIPTING FLUSH ASYNC (31 ms)
[ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms)
[ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (1 ms)
[ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms)
[ok]: SORT BY <constant> output gets ordered for scripting (3 ms)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (480 ms)
[ok]: SORT BY <constant> with GET gets ordered for scripting (0 ms)
[ok]: redis.sha1hex() implementation (1 ms)
[ok]: Globals protection reading an undeclared global variable (0 ms)
[ok]: Globals protection setting an undeclared global* (0 ms)
[ok]: Test an example script DECR_IF_GT (1 ms)
[ok]: random numbers are random now (0 ms)
[ok]: Scripting engine PRNG can be seeded correctly (2 ms)
[ok]: Test read commands are not blocked by client pause (6 ms)
[ok]: Test write commands are paused by RO (6 ms)
[ok]: Test special commands are paused by RO (13 ms)
[ok]: Test read/admin mutli-execs are not blocked by pause RO (5 ms)
[ok]: Test write mutli-execs are blocked by pause RO (5 ms)
[ok]: Test scripts are blocked by pause RO (9 ms)
[ok]: Test RO scripts are not blocked by pause RO (5 ms)
[ok]: Test read-only scripts in mutli-exec are not blocked by pause RO (5 ms)
[ok]: Test write scripts in mutli-exec are blocked by pause RO (10 ms)
[ok]: Test may-replicate commands are rejected in RO scripts (0 ms)
[ok]: LINDEX random access - quicklist (107 ms)
[ok]: Test multiple clients can be queued up and unblocked (17 ms)
[ok]: Test clients with syntax errors will get responses immediately (1 ms)
[40/81 done]: unit/lazyfree (1 seconds)
Testing unit/pendingquerybuf
[ok]: Memory efficiency with values in range 128 (390 ms)
[ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (344 ms)
[ok]: Test both active and passive expires are skipped during client pause (106 ms)
[ok]: Test that client pause starts at the end of a transaction (9 ms)
[ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (273 ms)
[41/81 done]: unit/bitops (3 seconds)
Testing unit/tls
[ok]: HyperLogLogs are promote from sparse to dense (481 ms)
[ok]: BZMPOP_MIN with zero timeout should block indefinitely (1017 ms)
[ok]: ZSCORE - skiplist (18 ms)
[ok]: TLS: Not accepting non-TLS connections on a TLS port (0 ms)
[ok]: EVAL does not leak in the Lua stack (336 ms)
[ok]: TLS: Verify tls-auth-clients behaves as expected (9 ms)
[ok]: ZMSCORE - skiplist (16 ms)
[ok]: TLS: Verify tls-protocols behaves as expected (7 ms)
[ok]: TLS: Verify tls-ciphers behaves as expected (13 ms)
[ok]: SPOP: We can call scripts rewriting client->argv from Lua (22 ms)
[ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (265 ms)
[ok]: LLEN against non-list value error (0 ms)
[ok]: LLEN against non existing key (0 ms)
[ok]: LINDEX against non-list value error (0 ms)
[ok]: LINDEX against non existing key (1 ms)
[ok]: LPUSH against non-list value error (0 ms)
[ok]: RPUSH against non-list value error (0 ms)
[ok]: RPOPLPUSH base case - linkedlist (1 ms)
[ok]: LMOVE left left base case - linkedlist (1 ms)
[ok]: LMOVE left right base case - linkedlist (2 ms)
[ok]: LMOVE right left base case - linkedlist (1 ms)
[ok]: LMOVE right right base case - linkedlist (1 ms)
[ok]: RPOPLPUSH with the same list as src and dst - linkedlist (1 ms)
[ok]: LMOVE left left with the same list as src and dst - linkedlist (0 ms)
[ok]: LMOVE left right with the same list as src and dst - linkedlist (1 ms)
[ok]: LMOVE right left with the same list as src and dst - linkedlist (0 ms)
[ok]: LMOVE right right with the same list as src and dst - linkedlist (1 ms)
[ok]: RPOPLPUSH with linkedlist source and existing target linkedlist (2 ms)
[ok]: TLS: Verify tls-prefer-server-ciphers behaves as expected (15 ms)
[ok]: LMOVE left left with linkedlist source and existing target linkedlist (1 ms)
[ok]: LMOVE left right with linkedlist source and existing target linkedlist (2 ms)
[ok]: LMOVE right left with linkedlist source and existing target linkedlist (1 ms)
[ok]: LMOVE right right with linkedlist source and existing target linkedlist (1 ms)
[ok]: RPOPLPUSH with linkedlist source and existing target ziplist (2 ms)
[ok]: LMOVE left left with linkedlist source and existing target ziplist (2 ms)
[ok]: LMOVE left right with linkedlist source and existing target ziplist (2 ms)
[ok]: LMOVE right left with linkedlist source and existing target ziplist (1 ms)
[ok]: ZSCORE after a DEBUG RELOAD - skiplist (44 ms)
[ok]: LMOVE right right with linkedlist source and existing target ziplist (1 ms)
[ok]: corrupt payload: fuzzer findings - negative reply length (163 ms)
[ok]: RPOPLPUSH base case - ziplist (1 ms)
[ok]: LMOVE left left base case - ziplist (1 ms)
[ok]: LMOVE left right base case - ziplist (1 ms)
[ok]: LMOVE right left base case - ziplist (1 ms)
[ok]: LMOVE right right base case - ziplist (1 ms)
[ok]: RPOPLPUSH with the same list as src and dst - ziplist (1 ms)
[ok]: LMOVE left left with the same list as src and dst - ziplist (1 ms)
[ok]: LMOVE left right with the same list as src and dst - ziplist (0 ms)
[ok]: LMOVE right left with the same list as src and dst - ziplist (1 ms)
[ok]: LMOVE right right with the same list as src and dst - ziplist (0 ms)
[ok]: RPOPLPUSH with ziplist source and existing target linkedlist (1 ms)
[ok]: LMOVE left left with ziplist source and existing target linkedlist (1 ms)
[ok]: LMOVE left right with ziplist source and existing target linkedlist (1 ms)
[ok]: LMOVE right left with ziplist source and existing target linkedlist (1 ms)
[ok]: LMOVE right right with ziplist source and existing target linkedlist (1 ms)
[ok]: RPOPLPUSH with ziplist source and existing target ziplist (1 ms)
[ok]: LMOVE left left with ziplist source and existing target ziplist (1 ms)
[ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2551 ms)
[ok]: LMOVE left right with ziplist source and existing target ziplist (1 ms)
[ok]: LMOVE right left with ziplist source and existing target ziplist (2 ms)
[ok]: LMOVE right right with ziplist source and existing target ziplist (1 ms)
[ok]: RPOPLPUSH against non existing key (0 ms)
[ok]: RPOPLPUSH against non list src key (0 ms)
[ok]: RPOPLPUSH against non list dst key (1 ms)
[ok]: RPOPLPUSH against non existing src key (0 ms)
[ok]: ZSET sorting stresser - skiplist (24 ms)
[ok]: Basic LPOP/RPOP/LMPOP - linkedlist (2 ms)
[ok]: Basic LPOP/RPOP/LMPOP - ziplist (1 ms)
[ok]: LPOP/RPOP/LMPOP against empty list (0 ms)
[ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (2 ms)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (428 ms)
[ok]: Mass RPOP/LPOP - quicklist (36 ms)
[ok]: MGET: mget shouldn't be propagated in Lua (101 ms)
[ok]: Test when replica paused, offset would not grow (2 ms)
[ok]: Test replica offset would grow after unpause (1 ms)
[ok]: Mass RPOP/LPOP - quicklist (65 ms)
[ok]: LMPOP with illegal argument (2 ms)
[ok]: LMPOP single existing list (3 ms)
[ok]: LMPOP multiple existing lists (3 ms)
[ok]: Memory efficiency with values in range 1024 (405 ms)
[ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (101 ms)
[ok]: Call Redis command with many args from Lua (issue #1764) (1 ms)
[ok]: Number conversion precision test (issue #1118) (0 ms)
[ok]: String containing number precision test (regression of issue #1118) (0 ms)
[ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms)
[ok]: Scripts can handle commands with incorrect arity (0 ms)
[ok]: Correct handling of reused argv (issue #1939) (0 ms)
[ok]: Functions in the Redis namespace are able to report errors (0 ms)
[ok]: CLUSTER RESET can not be invoke from within a script (0 ms)
[ok]: Script with RESP3 map (1 ms)
[42/81 done]: integration/aof-multi-part (13 seconds)
Testing unit/tracking
[ok]: LMPOP propagate as pop with count command to replica (103 ms)
[ok]: LRANGE basics - linkedlist (1 ms)
[ok]: LRANGE inverted indexes - linkedlist (1 ms)
[ok]: LRANGE out of range indexes including the full list - linkedlist (1 ms)
[ok]: LRANGE out of range negative end index - linkedlist (1 ms)
[ok]: LRANGE basics - ziplist (1 ms)
[ok]: LRANGE inverted indexes - ziplist (2 ms)
[ok]: LRANGE out of range indexes including the full list - ziplist (1 ms)
[ok]: LRANGE out of range negative end index - ziplist (0 ms)
[ok]: LRANGE against non existing key (0 ms)
[ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms)
[ok]: corrupt payload: fuzzer findings - valgrind negative malloc (252 ms)
[ok]: LTRIM basics - linkedlist (11 ms)
[ok]: LTRIM out of range negative end index - linkedlist (2 ms)
[ok]: PSYNC2: generate load while killing replication links (5000 ms)
[ok]: PSYNC2: cluster is consistent after load (x = 28109) (1 ms)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms)
[ok]: LTRIM basics - ziplist (10 ms)
[ok]: LTRIM out of range negative end index - ziplist (2 ms)
[ok]: PSYNC2: --- CYCLE 2 --- (0 ms)
[ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms)
[ok]: LSET - linkedlist (1 ms)
[ok]: LSET out of range index - linkedlist (0 ms)
[ok]: LSET - ziplist (1 ms)
[ok]: LSET out of range index - ziplist (0 ms)
[ok]: LSET against non existing key (0 ms)
[ok]: LSET against non list value (0 ms)
[ok]: Script return recursive object (101 ms)
[ok]: LREM remove all the occurrences - linkedlist (2 ms)
[ok]: PSYNC2: Set #0 to replicate from #2 (0 ms)
[ok]: LREM remove the first occurrence - linkedlist (0 ms)
[ok]: LREM remove non existing element - linkedlist (1 ms)
[ok]: LREM starting from tail with negative count - linkedlist (1 ms)
[ok]: LREM starting from tail with negative count (2) - linkedlist (0 ms)
[ok]: LREM deleting objects that may be int encoded - linkedlist (1 ms)
[ok]: Script check unpack with massive arguments (5 ms)
[ok]: Script read key with expiration set (0 ms)
[ok]: LREM remove all the occurrences - ziplist (1 ms)
[ok]: Script del key with expiration set (1 ms)
[ok]: LREM remove the first occurrence - ziplist (1 ms)
[ok]: LREM remove non existing element - ziplist (0 ms)
[ok]: Script ACL check (0 ms)
[ok]: Binary code loading failed (1 ms)
[ok]: Try trick global protection 1 (0 ms)
[ok]: LREM starting from tail with negative count - ziplist (1 ms)
[ok]: Try trick global protection 2 (0 ms)
[ok]: LREM starting from tail with negative count (2) - ziplist (1 ms)
[ok]: Try trick global protection 3 (0 ms)
[ok]: Try trick global protection 4 (1 ms)
[ok]: Try trick readonly table on redis table (0 ms)
[ok]: Try trick readonly table on json table (0 ms)
[ok]: LREM deleting objects that may be int encoded - ziplist (0 ms)
[ok]: Try trick readonly table on cmsgpack table (0 ms)
[ok]: Try trick readonly table on bit table (1 ms)
[ok]: Test loadfile are not available (0 ms)
[ok]: Test dofile are not available (0 ms)
[ok]: Test print are not available (0 ms)
[43/81 done]: unit/pause (1 seconds)
Testing unit/shutdown
[ok]: TLS: Verify tls-cert-file is also used as a client cert if none specified (361 ms)
[ok]: TLS: switch between tcp and tls ports (9 ms)
[ok]: TLS: Working with an encrypted keyfile (5 ms)
[ok]: Clients are able to enable tracking and redirect it (0 ms)
[ok]: The other connection is able to get invalidations (1 ms)
[ok]: The client is now able to disable tracking (1 ms)
[ok]: Clients can enable the BCAST mode with the empty prefix (0 ms)
[ok]: The connection gets invalidation messages about all the keys (0 ms)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (328 ms)
[ok]: Clients can enable the BCAST mode with prefixes (1 ms)
[ok]: Adding prefixes to BCAST mode works (0 ms)
[ok]: Tracking NOLOOP mode in standard mode works (0 ms)
[ok]: Tracking NOLOOP mode in BCAST mode works (1 ms)
[ok]: redis-server command line arguments - save with empty input (1216 ms)
[ok]: WAIT should not acknowledge 2 additional copies of the data (1026 ms)
[44/81 done]: unit/tls (1 seconds)
Testing unit/networking
[ok]: BLMOVE (left, left) replication, list exists (1013 ms)
[ok]: BLMOVE (left, right) replication, when blocking against empty list (4 ms)
Waiting for process 3812 to exit...
[ok]: corrupt payload: fuzzer findings - valgrind invalid read (245 ms)
[ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (110 ms)
[ok]: EVAL timeout with slow verbatim Lua script from AOF (1458 ms)
[ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (227 ms)
[ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms)
[ok]: GETEX use of PERSIST option should remove TTL (0 ms)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (305 ms)
[ok]: CONFIG SET port number (253 ms)
[ok]: corrupt payload: fuzzer findings - empty hash ziplist (247 ms)
[ok]: HyperLogLog sparse encoding stress test (841 ms)
[ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms)
[ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms)
[ok]: SHUTDOWN ABORT can cancel SIGTERM (14 ms)
[ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms)
[ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms)
[ok]: Temp rdb will be deleted in signal handle (77 ms)
[ok]: EVAL can process writes from AOF in read-only replicas (257 ms)
[ok]: cannot modify protected configuration - no (1 ms)
[ok]: Test redis-check-aof for old style resp AOF (5 ms)
[ok]: Test redis-check-aof for old style rdb-preamble AOF (5 ms)
[ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (5 ms)
[ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (8 ms)
[ok]: corrupt payload: fuzzer findings - stream with no records (153 ms)
[ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (12 ms)
[ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (7 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (8 ms)
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL (408 ms)
[ok]: CONFIG SET bind address (284 ms)
[ok]: RDB save will be failed in shutdown (4 ms)
[ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (346 ms)
[ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (52 ms)
[ok]: Memory efficiency with values in range 16384 (870 ms)
[ok]: Timedout script does not cause a false dead client (36 ms)
[ok]: SHUTDOWN will abort if rdb save failed on signal (85 ms)
[ok]: SHUTDOWN will abort if rdb save failed on shutdown command (13 ms)
[ok]: SHUTDOWN can proceed if shutdown command was with nosave (5 ms)
[ok]: Clean up rdb same named folder (1 ms)
[45/81 done]: unit/shutdown (1 seconds)
Testing unit/cluster
[ignore]: Not supported in tls mode
[46/81 done]: unit/cluster (0 seconds)
Testing unit/client-eviction
[ok]: Timedout script link is still usable after Lua returns (50 ms)
[ok]: Client output buffer hard limit is enforced (5155 ms)
[ok]: cannot modify protected configuration - local (3 ms)
[ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (256 ms)
[47/81 done]: unit/memefficiency (3 seconds)
Testing unit/violations
[ok]: client evicted due to large argv (41 ms)
[ok]: PSYNC2: Set #1 to replicate from #4 (2 ms)
[ok]: FLUSHDB / FLUSHALL should persist in AOF (243 ms)
[ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1018 ms)
[ok]: client evicted due to large query buf (28 ms)
[ok]: client unblock tests (5 ms)
[ok]: client unblock tests (4 ms)
[ok]: maxmemory - policy volatile-lru should only remove volatile keys. (298 ms)
[ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (207 ms)
[ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms)
[ok]: client evicted due to percentage of maxmemory (43 ms)
[48/81 done]: integration/aof (14 seconds)
Testing unit/replybufsize
[ok]: Tracking gets notification of expired keys (1004 ms)
[ok]: TOUCH alters the last access time of a key (3008 ms)
[ok]: TOUCH returns the number of existing keys specified (1 ms)
[ok]: command stats for GEOADD (1 ms)
[ok]: client evicted due to large multi buf (41 ms)
[ok]: errors stats for GEOADD (2 ms)
[ok]: command stats for EXPIRE (0 ms)
[ok]: command stats for BRPOP (2 ms)
[ok]: command stats for MULTI (2 ms)
[ok]: SORT adds integer field to list (0 ms)
[ok]: command stats for scripts (1 ms)
[ok]: corrupt payload: fuzzer findings - dict init to huge size (245 ms)
[ok]: COMMAND GETKEYS GET (0 ms)
[ok]: COMMAND GETKEYSANDFLAGS (1 ms)
[ok]: COMMAND GETKEYS MEMORY USAGE (0 ms)
[ok]: COMMAND GETKEYS XGROUP (0 ms)
[ok]: COMMAND GETKEYS EVAL with keys (1 ms)
[ok]: COMMAND GETKEYS EVAL without keys (0 ms)
[ok]: COMMAND GETKEYS LCS (0 ms)
[ok]: COMMAND LIST syntax error (0 ms)
[ok]: COMMAND LIST WITHOUT FILTERBY (3 ms)
[ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (1 ms)
[ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms)
[ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms)
[ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms)
[ok]: COMMAND INFO of invalid subcommands (0 ms)
[ok]: SET command will not be marked with movablekeys (1 ms)
[ok]: GET command will not be marked with movablekeys (0 ms)
[ok]: MSET command will not be marked with movablekeys (0 ms)
[ok]: BITFIELD command will not be marked with movablekeys (0 ms)
[ok]: LMOVE command will not be marked with movablekeys (0 ms)
[ok]: LPOP command will not be marked with movablekeys (0 ms)
[ok]: List ziplist of various encodings (94 ms)
[ok]: BLPOP command will not be marked with movablekeys (0 ms)
[ok]: PING command will not be marked with movablekeys (0 ms)
[ok]: MEMORY command will not be marked with movablekeys (1 ms)
[ok]: List ziplist of various encodings - sanitize dump (2 ms)
[ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms)
[ok]: RENAME command will not be marked with movablekeys (0 ms)
[ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms)
[ok]: ZUNIONSTORE command is marked with movablekeys (0 ms)
[ok]: XREAD command is marked with movablekeys (1 ms)
[ok]: EVAL command is marked with movablekeys (0 ms)
[ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1013 ms)
[ok]: SORT command is marked with movablekeys (0 ms)
[ok]: SORT_RO command is marked with movablekeys (0 ms)
[ok]: MIGRATE command is marked with movablekeys (1 ms)
[ok]: GEORADIUS command is marked with movablekeys (1 ms)
[ok]: BLMOVE (left, right) replication, list exists (1008 ms)
[ok]: BLMOVE (right, left) replication, when blocking against empty list (5 ms)
[ok]: Tracking gets notification of lazy expired keys (101 ms)
[ok]: HELLO 3 reply is correct (0 ms)
[ok]: HELLO without protover (1 ms)
[ok]: RESP3 based basic invalidation (1 ms)
[ok]: RESP3 tracking redirection (0 ms)
[ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms)
[ok]: Invalidations of new keys can be redirected after switching to RESP3 (0 ms)
[ok]: Tracking only occurs for scripts when a command calls a read-only command (2 ms)
[ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (5 ms)
[ok]: Different clients can redirect to the same connection (1 ms)
[49/81 done]: unit/violations (0 seconds)
Testing unit/cluster-scripting
[ok]: Different clients using different protocols can track the same key (0 ms)
[ok]: No invalidation message when using OPTIN option (0 ms)
[ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms)
[ok]: Invalidation message sent when using OPTOUT option (1 ms)
[50/81 done]: unit/type/list (14 seconds)
[ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms)
[ok]: Able to redirect to a RESP3 client (1 ms)
[ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms)
[ok]: BCAST with prefix collisions throw errors (5 ms)
[ok]: hdel deliver invalidate message after response in the same connection (1 ms)
[ok]: CONFIG SET bind-source-addr (559 ms)
[51/81 done]: unit/introspection-2 (6 seconds)
[ok]: client evicted due to watched key list (205 ms)
[ok]: Before the replica connects we issue two EVAL commands (0 ms)
[ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms)
[ok]: Tracking invalidation message is not interleaved with transaction response (1 ms)
[ok]: Tracking invalidation message of eviction keys should be before response (2 ms)
[ok]: Unblocked BLMOVE gets notification after response (0 ms)
[ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (308 ms)
[ok]: corrupt payload: fuzzer findings - huge string (252 ms)
[ok]: Tracking gets notification on tracking table key eviction (63 ms)
Waiting for process 3812 to exit...
[ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1673 ms)
[ok]: Connect a replica to the master instance (102 ms)
[ok]: Now use EVALSHA against the master, with both SHAs (0 ms)
[ok]: 'x' should be '4' for EVALSHA being replicated by effects (1 ms)
[ok]: Replication of script multiple pushes to list with BLPOP (4 ms)
[ok]: EVALSHA replication when first call is readonly (0 ms)
[ok]: Lua scripts using SELECT are replicated correctly (1 ms)
[ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (113 ms)
[ok]: Invalidation message received for flushall (240 ms)
[ok]: maxmemory - policy volatile-random should only remove volatile keys. (306 ms)
[ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (164 ms)
[ok]: query buffer resized correctly (2278 ms)
[ok]: ZSETs skiplist implementation backlink consistency test - skiplist (13 ms)
[ok]: corrupt payload: fuzzer findings - stream PEL without consumer (413 ms)
[ok]: Invalidation message received for flushdb (184 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (1 ms)
[ok]: verify reply buffer limits (655 ms)
[ok]: query buffer resized correctly when not idle (198 ms)
[ok]: Test ASYNC flushall (70 ms)
[ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (142 ms)
[52/81 done]: unit/replybufsize (1 seconds)
[ok]: PSYNC2: Set #2 to replicate from #1 (0 ms)
[ok]: Default bind address configuration handling (618 ms)
[ok]: Protected mode works as expected (2 ms)
[53/81 done]: unit/querybuf (3 seconds)
[ok]: pending querybuf: check size of pending_querybuf after set a big value (2324 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (1 ms)
[ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (432 ms)
[ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (239 ms)
[ok]: config during loading (1095 ms)
[54/81 done]: unit/networking (2 seconds)
[ok]: BLMOVE (right, left) replication, list exists (1008 ms)
[ok]: BLMOVE (right, right) replication, when blocking against empty list (5 ms)
[ok]: Tracking info is correct (105 ms)
[ok]: CLIENT GETREDIR provides correct client id (0 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms)
[ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1116 ms)
[ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (343 ms)
[ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (571 ms)
[ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (6 ms)
[ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (6 ms)
[ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (4 ms)
[ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (4 ms)
[ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (73 ms)
[ok]: BZPOPMIN with same key multiple times should work (5 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (5 ms)
[ok]: BZPOPMIN with variadic ZADD (5 ms)
[ok]: GETEX use of PERSIST option should remove TTL after loadaof (2008 ms)
[ok]: MIGRATE cached connections are released after some time (15003 ms)
[55/81 done]: unit/tracking (2 seconds)
[ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (152 ms)
[56/81 done]: unit/wait (4 seconds)
[ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (123 ms)
[ok]: EXPIRE with NX option on a key with ttl (1 ms)
[ok]: EXPIRE with NX option on a key without ttl (0 ms)
[ok]: EXPIRE with XX option on a key with ttl (1 ms)
[ok]: EXPIRE with XX option on a key without ttl (0 ms)
[ok]: EXPIRE with GT option on a key with lower ttl (1 ms)
[ok]: EXPIRE with GT option on a key with higher ttl (0 ms)
[ok]: EXPIRE with GT option on a key without ttl (0 ms)
[ok]: EXPIRE with LT option on a key with higher ttl (1 ms)
[ok]: EXPIRE with LT option on a key with lower ttl (0 ms)
[ok]: EXPIRE with LT option on a key without ttl (1 ms)
[ok]: EXPIRE with LT and XX option on a key with ttl (0 ms)
[ok]: EXPIRE with LT and XX option on a key without ttl (0 ms)
[ok]: EXPIRE with conflicting options: LT GT (0 ms)
[ok]: EXPIRE with conflicting options: NX GT (1 ms)
[ok]: EXPIRE with conflicting options: NX LT (0 ms)
[ok]: EXPIRE with conflicting options: NX XX (0 ms)
[ok]: EXPIRE with unsupported options (0 ms)
[ok]: EXPIRE with unsupported options (0 ms)
[ok]: EXPIRE with negative expiry (0 ms)
[ok]: EXPIRE with negative expiry on a non-valitale key (0 ms)
[ok]: EXPIRE with non-existed key (1 ms)
[57/81 done]: unit/pendingquerybuf (3 seconds)
[ok]: client evicted due to pubsub subscriptions (1242 ms)
[ok]: client evicted due to tracking redirection (20 ms)
[ok]: MIGRATE is able to migrate a key between two instances (243 ms)
[58/81 done]: unit/expire (16 seconds)
[ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (278 ms)
[ok]: Connect a replica to the master instance (103 ms)
[ok]: Redis.replicate_commands() can be issued anywhere now (0 ms)
[ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms)
[ok]: Redis.set_repl() don't accept invalid values (0 ms)
[ok]: Test selective replication of certain Redis commands from Lua (1 ms)
[ok]: PRNG is seeded randomly for command replication (1 ms)
[ok]: Using side effects is not a problem with command replication (0 ms)
[ok]: CONFIG REWRITE handles rename-command properly (597 ms)
[ok]: ziplist implementation: encoding stress testing (7656 ms)
Waiting for process 3812 to exit...
[ok]: test various edge cases of repl topology changes with missing pings at the end (3348 ms)
[59/81 done]: unit/type/list-3 (16 seconds)
[ok]: MIGRATE is able to copy a key between two instances (230 ms)
[ok]: corrupt payload: fuzzer findings - empty quicklist (239 ms)
[ok]: PSYNC2: Set #3 to replicate from #2 (0 ms)
[ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (230 ms)
[ok]: corrupt payload: fuzzer findings - empty zset (248 ms)
[ok]: BLMOVE (right, right) replication, list exists (1008 ms)
[ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms)
[ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (0 ms)
[ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms)
[ok]: MIGRATE propagates TTL correctly (244 ms)
[ok]: BZPOPMIN with zero timeout should block indefinitely (1006 ms)
[ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (5 ms)
[ok]: BZMPOP_MIN with variadic ZADD (5 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (0 ms)
[60/81 done]: unit/cluster-scripting (2 seconds)
[ok]: BLPOP followed by role change, issue #2473 (211 ms)
[ok]: corrupt payload: fuzzer findings - hash with len of 0 (254 ms)
[ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (246 ms)
[ok]: CONFIG REWRITE handles alias config properly (951 ms)
[61/81 done]: unit/introspection (9 seconds)
[ok]: client evicted due to client tracking prefixes (1297 ms)
[ok]: client evicted due to output buf (17 ms)
[ok]: Second server should have role master at first (0 ms)
[ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (237 ms)
[ok]: SLAVEOF should start with link status "down" (2 ms)
[ok]: The role should immediately be changed to "replica" (2 ms)
[ok]: client no-evict on (33 ms)
[ok]: client no-evict off (28 ms)
[ok]: Test scripting debug protocol parsing (1 ms)
[ok]: Test scripting debug lua stack overflow (3 ms)
Waiting for process 3812 to exit...
[ok]: PSYNC2: cluster is consistent after failover (0 ms)
[ok]: Sync should have transferred keys from master (0 ms)
[ok]: The link status should be up (0 ms)
[ok]: SET on the master should immediately propagate (1 ms)
[ok]: XRANGE fuzzing (11350 ms)
[ok]: XREVRANGE regression test for issue #5006 (1 ms)
[ok]: XREAD streamID edge (no-blocking) (0 ms)
[ok]: XREAD streamID edge (blocking) (4 ms)
[ok]: XADD streamID edge (0 ms)
[ok]: XTRIM with MAXLEN option basic test (58 ms)
[ok]: corrupt payload: fuzzer findings - LCS OOM (237 ms)
[ok]: XADD with LIMIT consecutive calls (6 ms)
[ok]: XTRIM with ~ is limited (7 ms)
[ok]: XTRIM without ~ is not limited (9 ms)
[ok]: XTRIM without ~ and with LIMIT (7 ms)
[ok]: XTRIM with LIMIT delete entries no more than limit (1 ms)
[ok]: test RESP2/2 big number protocol parsing (0 ms)
[ok]: test RESP2/2 malformed big number protocol parsing (0 ms)
[ok]: test RESP2/2 map protocol parsing (0 ms)
[ok]: test RESP2/2 set protocol parsing (0 ms)
[ok]: test RESP2/2 double protocol parsing (0 ms)
[ok]: test RESP2/2 null protocol parsing (0 ms)
[ok]: test RESP2/2 verbatim protocol parsing (0 ms)
[ok]: test RESP2/2 true protocol parsing (0 ms)
[ok]: test RESP2/2 false protocol parsing (0 ms)
[ok]: test RESP2/3 big number protocol parsing (0 ms)
[ok]: test RESP2/3 malformed big number protocol parsing (0 ms)
[ok]: test RESP2/3 map protocol parsing (0 ms)
[ok]: test RESP2/3 set protocol parsing (0 ms)
[ok]: test RESP2/3 double protocol parsing (0 ms)
[ok]: test RESP2/3 null protocol parsing (0 ms)
[ok]: test RESP2/3 verbatim protocol parsing (0 ms)
[ok]: test RESP2/3 true protocol parsing (0 ms)
[ok]: test RESP2/3 false protocol parsing (0 ms)
[ok]: test RESP3/2 big number protocol parsing (0 ms)
[ok]: test RESP3/2 malformed big number protocol parsing (0 ms)
[ok]: test RESP3/2 map protocol parsing (0 ms)
[ok]: test RESP3/2 set protocol parsing (0 ms)
[ok]: test RESP3/2 double protocol parsing (0 ms)
[ok]: test RESP3/2 null protocol parsing (1 ms)
[ok]: test RESP3/2 verbatim protocol parsing (0 ms)
[ok]: test RESP3/2 true protocol parsing (0 ms)
[ok]: test RESP3/2 false protocol parsing (0 ms)
[ok]: test RESP3/3 big number protocol parsing (0 ms)
[ok]: test RESP3/3 malformed big number protocol parsing (0 ms)
[ok]: test RESP3/3 map protocol parsing (1 ms)
[ok]: test RESP3/3 set protocol parsing (0 ms)
[ok]: test RESP3/3 double protocol parsing (0 ms)
[ok]: test RESP3/3 null protocol parsing (0 ms)
[ok]: test RESP3/3 verbatim protocol parsing (0 ms)
[ok]: test RESP3/3 true protocol parsing (0 ms)
[ok]: test RESP3/3 false protocol parsing (0 ms)
[ok]: test resp3 attribute protocol parsing (0 ms)
[ok]: Script block the time during execution (10 ms)
[ok]: Script delete the expired key (3 ms)
[ok]: avoid client eviction when client is freed by output buffer limit (72 ms)
[ok]: FLUSHDB / FLUSHALL should replicate (271 ms)
[ok]: ROLE in master reports master with a slave (1 ms)
[ok]: ROLE in slave reports slave in connected state (0 ms)
[ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (142 ms)
[ok]: BZMPOP_MIN with zero timeout should block indefinitely (1005 ms)
[ok]: BZPOP/BZMPOP against wrong type (1 ms)
[ok]: BZMPOP with illegal argument (1 ms)
[ok]: BZMPOP with multiple blocked clients (13 ms)
[ok]: XADD with MAXLEN > xlen can propagate correctly (9 ms)
[ok]: corrupt payload: fuzzer findings - lpFind invalid access (136 ms)
[ok]: Shebang support for lua engine (0 ms)
[ok]: Unknown shebang option (0 ms)
[ok]: Unknown shebang flag (0 ms)
[ok]: allow-oom shebang flag (1 ms)
[ok]: no-writes shebang flag (1 ms)
[ok]: BZMPOP propagate as pop with count command to replica (152 ms)
[ok]: BZMPOP should not blocks on non key arguments - #10762 (9 ms)
[ok]: decrease maxmemory-clients causes client eviction (154 ms)
[ok]: XADD with MINID > lastid can propagate correctly (8 ms)
[ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (257 ms)
[ok]: no-writes shebang flag on replica (113 ms)
[ok]: Client output buffer soft limit is enforced if time is overreached (3864 ms)
[ok]: not enough good replicas (0 ms)
[ok]: evict clients only until below limit (114 ms)
[ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (251 ms)
[ok]: XADD with ~ MAXLEN can propagate correctly (8 ms)
[ok]: ZSET skiplist order consistency when elements are moved (614 ms)
[ok]: ZRANGESTORE basic (14 ms)
[ok]: ZRANGESTORE RESP3 (0 ms)
[ok]: ZRANGESTORE range (0 ms)
[ok]: ZRANGESTORE BYLEX (0 ms)
[ok]: ZRANGESTORE BYSCORE (1 ms)
[ok]: ZRANGESTORE BYSCORE LIMIT (0 ms)
[ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms)
[ok]: ZRANGE BYSCORE REV LIMIT (0 ms)
[ok]: ZRANGESTORE - src key missing (0 ms)
[ok]: ZRANGESTORE - src key wrong type (0 ms)
[ok]: ZRANGESTORE - empty range (0 ms)
[ok]: ZRANGESTORE BYLEX - empty range (0 ms)
[ok]: ZRANGESTORE BYSCORE - empty range (1 ms)
[ok]: ZRANGE BYLEX (0 ms)
[ok]: ZRANGESTORE invalid syntax (0 ms)
[ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (0 ms)
[ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms)
[ok]: ZRANGE invalid syntax (1 ms)
[ok]: ZRANDMEMBER - listpack (7 ms)
[ok]: ZRANDMEMBER - skiplist (7 ms)
[ok]: ZRANDMEMBER with RESP3 (1 ms)
[ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms)
[ok]: ZRANDMEMBER with <count> against non existing key (0 ms)
[ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms)
[ok]: ZRANDMEMBER with <count> against non existing key - emptyarray (1 ms)
[ok]: corrupt payload: fuzzer findings - streamLastValidID panic (254 ms)
[62/81 done]: integration/corrupt-dump (18 seconds)
[ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (10 ms)
[ok]: evict clients in right order (large to small) (131 ms)
[ok]: not enough good replicas state change during long script (488 ms)
[ok]: allow-stale shebang flag (2 ms)
[ok]: reject script do not cause a Lua stack leak (6 ms)
[63/81 done]: unit/client-eviction (4 seconds)
[ok]: ZRANDMEMBER with <count> - skiplist (204 ms)
[ok]: XADD with ~ MINID can propagate correctly (11 ms)
[ok]: ZRANDMEMBER with <count> - listpack (186 ms)
[ok]: zset score double range (1 ms)
[ok]: Consistent eval error reporting (8 ms)
[ok]: LUA redis.error_reply API (1 ms)
[ok]: LUA redis.error_reply API with empty string (0 ms)
[ok]: LUA redis.status_reply API (0 ms)
[ok]: LUA test pcall (0 ms)
[ok]: LUA test pcall with error (0 ms)
[64/81 done]: unit/type/zset (19 seconds)
[ok]: PSYNC2 #3899 regression: kill first replica (0 ms)
[65/81 done]: unit/scripting (12 seconds)
[ok]: XADD with ~ MINID and LIMIT can propagate correctly (7 ms)
[ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7768 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: XTRIM with ~ MAXLEN can propagate correctly (7 ms)
[ok]: XADD can CREATE an empty stream (0 ms)
[ok]: XSETID can set a specific ID (0 ms)
[ok]: XSETID cannot SETID with smaller ID (1 ms)
[ok]: XSETID cannot SETID on non-existent key (0 ms)
[ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms)
[ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms)
[ok]: XSETID errors on negstive offset (1 ms)
[ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms)
[ok]: XSETID cannot set the offset to less than the length (0 ms)
[ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (0 ms)
[ok]: XDEL/TRIM are reflected by recorded first entry (2 ms)
[ok]: Maxmimum XDEL ID behaves correctly (1 ms)
[ok]: Slave should be able to synchronize with the master (102 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Chained replicas disconnect when replica re-connect with the same master (2975 ms)
[ok]: Empty stream can be rewrite into AOF correctly (132 ms)
[ok]: Stream can be rewrite into AOF correctly after XDEL lastid (129 ms)
[ok]: XGROUP HELP should not have unexpected options (0 ms)
[ok]: XINFO HELP should not have unexpected options (0 ms)
[ok]: Replication: commands with many arguments (issue #1221) (8217 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (0 ms)
[66/81 done]: unit/type/stream (20 seconds)
[ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3203 ms)
[67/81 done]: integration/replication-buffer (21 seconds)
[ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9993 ms)
[68/81 done]: integration/corrupt-dump-fuzzer (20 seconds)
[69/81 done]: integration/psync2-pingoff (17 seconds)
[ok]: Replication of SPOP command -- alsoPropagate() API (425 ms)
[ok]: MIGRATE can correctly transfer large values (5255 ms)
[ok]: First server should have role slave after SLAVEOF (101 ms)
[ok]: Data divergence can happen under default conditions (6 ms)
[ok]: Data divergence is allowed on writable replicas (4 ms)
[70/81 done]: integration/replication-4 (22 seconds)
[ok]: MIGRATE can correctly transfer hashes (238 ms)
[ok]: PSYNC2 #3899 regression: kill chained replica (0 ms)
[ok]: GEOSEARCH fuzzy test - byradius (11830 ms)
[ok]: PSYNC2: generate load while killing replication links (5000 ms)
[ok]: PSYNC2: cluster is consistent after load (x = 90800) (0 ms)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms)
[ok]: PSYNC2: --- CYCLE 3 --- (0 ms)
[ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms)
[ok]: PSYNC2: Set #0 to replicate from #2 (0 ms)
[ok]: MIGRATE timeout actually works (679 ms)
[ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (4927 ms)
[ok]: MIGRATE can migrate multiple keys at once (234 ms)
[ok]: MIGRATE with multiple keys must have empty key arg (0 ms)
[ok]: No response for single command if client output buffer hard limit is enforced (116 ms)
[ok]: MIGRATE with multiple keys migrate just existing ones (243 ms)
[ok]: PSYNC2: Set #4 to replicate from #2 (0 ms)
[ok]: MIGRATE with multiple keys: stress command rewriting (241 ms)
[ok]: MIGRATE with multiple keys: delete just ack keys (237 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (1 ms)
[ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1049 ms)
[ok]: Execute transactions completely even if client output buffer limit is enforced (14 ms)
[ok]: MIGRATE AUTH: correct and wrong password cases (379 ms)
[71/81 done]: unit/dump (24 seconds)
[72/81 done]: unit/obuf-limits (16 seconds)
[ok]: PSYNC2: Set #1 to replicate from #4 (0 ms)
[ok]: PSYNC2 #3899 regression: kill first replica (0 ms)
[ok]: PSYNC2 #3899 regression: verify consistency (12 ms)
[ok]: PSYNC2: Set #3 to replicate from #1 (0 ms)
[ok]: PSYNC2: cluster is consistent after failover (1 ms)
[73/81 done]: integration/psync2-reg (23 seconds)
[ok]: Test replication with blocking lists and sorted sets operations (25006 ms)
[74/81 done]: integration/block-repl (26 seconds)
[ok]: AOF rewrite during write load: RDB preamble=no (15658 ms)
[ok]: Turning off AOF kills the background writing child if any (116 ms)
[ok]: AOF rewrite of list with quicklist encoding, string data (124 ms)
[ok]: AOF rewrite of list with quicklist encoding, int data (119 ms)
[ok]: AOF rewrite of set with intset encoding, string data (115 ms)
[ok]: AOF rewrite of set with hashtable encoding, string data (118 ms)
[ok]: AOF rewrite of set with intset encoding, int data (112 ms)
[ok]: AOF rewrite of set with hashtable encoding, int data (119 ms)
[ok]: AOF rewrite of hash with listpack encoding, string data (126 ms)
[ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (15487 ms)
[ok]: PFADD, PFCOUNT, PFMERGE type checking works (0 ms)
[ok]: PFMERGE results on the cardinality of union of sets (0 ms)
[ok]: AOF rewrite of hash with hashtable encoding, string data (135 ms)
[ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9346 ms)
[ok]: AOF rewrite of hash with listpack encoding, int data (118 ms)
[ok]: AOF rewrite of hash with hashtable encoding, int data (131 ms)
[ok]: AOF rewrite of zset with listpack encoding, string data (126 ms)
[ok]: AOF rewrite of zset with skiplist encoding, string data (131 ms)
[ok]: GEOSEARCH fuzzy test - bybox (7566 ms)
[ok]: GEOSEARCH box edges fuzzy test (26 ms)
[75/81 done]: unit/geo (20 seconds)
[ok]: AOF rewrite of zset with listpack encoding, int data (127 ms)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: Detect write load to master (0 ms)
[ok]: AOF rewrite of zset with skiplist encoding, int data (130 ms)
[ok]: AOF rewrite functions (126 ms)
[ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (219 ms)
[ok]: BGREWRITEAOF is refused if already in progress (5 ms)
[76/81 done]: unit/aofrw (30 seconds)
[ok]: PSYNC2: generate load while killing replication links (5000 ms)
[ok]: PSYNC2: cluster is consistent after load (x = 204258) (1 ms)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms)
[ok]: PSYNC2: --- CYCLE 4 --- (0 ms)
[ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms)
[ok]: PSYNC2: Set #0 to replicate from #2 (1 ms)
[ok]: slave buffer are counted correctly (15879 ms)
[ok]: PSYNC2: Set #4 to replicate from #3 (0 ms)
[ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3136 ms)
[ok]: PSYNC2: Set #1 to replicate from #0 (0 ms)
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (15506 ms)
[ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1379 ms)
[ok]: PSYNC2: Set #2 to replicate from #3 (0 ms)
[ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (610 ms)
[ok]: PFADD / PFCOUNT cache invalidation works (0 ms)
[77/81 done]: unit/hyperloglog (23 seconds)
[ok]: PSYNC2: cluster is consistent after failover (1 ms)
[ok]: replica buffer don't induce eviction (4627 ms)
[ok]: Don't rehash if used memory exceeds maxmemory after rehash (103 ms)
[ok]: client tracking don't cause eviction feedback loop (1313 ms)
[ok]: propagation with eviction (84 ms)
[ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9349 ms)
[ok]: propagation with eviction in MULTI (75 ms)
[78/81 done]: unit/maxmemory (31 seconds)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: Detect write load to master (1 ms)
[ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (6 ms)
[ok]: PSYNC2: generate load while killing replication links (5000 ms)
[ok]: PSYNC2: cluster is consistent after load (x = 305434) (0 ms)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms)
[ok]: PSYNC2: --- CYCLE 5 --- (0 ms)
[ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms)
[ok]: PSYNC2: Set #0 to replicate from #1 (0 ms)
[ok]: Slave should be able to synchronize with the master (104 ms)
[ok]: Detect write load to master (0 ms)
[ok]: PSYNC2: Set #1 to replicate from #2 (0 ms)
[ok]: PSYNC2: Set #2 to replicate from #4 (0 ms)
[ok]: PSYNC2: Set #3 to replicate from #2 (0 ms)
[ok]: PSYNC2: cluster is consistent after failover (1 ms)
[ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6277 ms)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: Detect write load to master (0 ms)
[ok]: PSYNC2: generate load while killing replication links (5000 ms)
[ok]: PSYNC2: cluster is consistent after load (x = 424449) (1 ms)
[ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms)
[ok]: PSYNC2: Bring the master back again for next test (1 ms)
[ok]: PSYNC2: Partial resync after restart using RDB aux fields (214 ms)
[79/81 done]: integration/psync2 (47 seconds)
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (16430 ms)
[ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7827 ms)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9335 ms)
[ok]: Slave should be able to synchronize with the master (101 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (18765 ms)
[ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9373 ms)
[ok]: Slave should be able to synchronize with the master (808 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (36 ms)
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6305 ms)
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7851 ms)
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (18108 ms)
[ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9361 ms)
[ok]: Slave should be able to synchronize with the master (806 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9487 ms)
[ok]: Slave should be able to synchronize with the master (1815 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (178 ms)
[ok]: Master stream is correctly processed while the replica has a script in -BUSY state (18932 ms)
[ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms)
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
[ok]: Diskless load swapdb (different replid): replica enter loading (426 ms)
[ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms)
[ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms)
[ok]: Diskless load swapdb (async_loading): replica enter async_loading (430 ms)
[ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (859 ms)
[ok]: Busy script during async loading (1099 ms)
[ok]: Blocked commands and configs during async-loading (431 ms)
[ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms)
[ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6311 ms)
Waiting for process 16515 to exit...
Waiting for process 16515 to exit...
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
Waiting for process 16515 to exit...
Waiting for process 16515 to exit...
[ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7871 ms)
[ok]: Slave should be able to synchronize with the master (809 ms)
[ok]: Detect write load to master (0 ms)
[ok]: diskless loading short read (6864 ms)
[ok]: diskless no replicas drop during rdb pipe (5766 ms)
[ok]: diskless slow replicas drop during rdb pipe (2670 ms)
[ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9381 ms)
[ok]: Slave should be able to synchronize with the master (807 ms)
[ok]: Detect write load to master (0 ms)
[ok]: diskless fast replicas drop during rdb pipe (5328 ms)
[ok]: diskless all replicas drop during rdb pipe (1617 ms)
[ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10445 ms)
[80/81 done]: integration/replication-psync (158 seconds)
[ok]: diskless timeout replicas drop during rdb pipe (6284 ms)
[ok]: diskless replication child being killed is collected (2338 ms)
[ok]: diskless replication read pipe cleanup (743 ms)
[ok]: replicaof right after disconnection (1857 ms)
[ok]: Kill rdb child process if its dumping RDB is not useful (1159 ms)
[ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms)
[ok]: Discard cache master before loading transferred RDB when full sync (106 ms)
[ok]: replica can handle EINTR if use diskless load (685 ms)
[ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (113 ms)
[exception]: Executing test client: MISCONF Redis is configured to save RDB snapshots, but it's currently unable to persist to disk. Commands that may modify the data set are disabled, because this instance is configured to report errors during writes if RDB snapshotting fails (stop-writes-on-bgsave-error option). Please check the Redis logs for details about the RDB error..
MISCONF Redis is configured to save RDB snapshots, but it's currently unable to persist to disk. Commands that may modify the data set are disabled, because this instance is configured to report errors during writes if RDB snapshotting fails (stop-writes-on-bgsave-error option). Please check the Redis logs for details about the RDB error.
    while executing
"[srv $level "client"] {*}$args"
    (procedure "r" line 7)
    invoked from within
"r ping"
    ("uplevel" body line 9)
    invoked from within
"uplevel 1 $code"
    (procedure "test" line 51)
    invoked from within
"test "replica do not write the reply to the replication link - SYNC (addReplyDeferredLen)" {
        set rd [redis_deferring_client]
        set lines..."
    ("uplevel" body line 20)
    invoked from within
"uplevel 1 $code "
    (procedure "start_server" line 3)
    invoked from within
"start_server {tags {"repl" "external:skip"}} {
    test "replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList)" {
  ..."
    (file "tests/integration/replication.tcl" line 1277)
    invoked from within
"source $path"
    (procedure "execute_test_file" line 4)
    invoked from within
"execute_test_file $data"
    (procedure "test_client_main" line 10)
    invoked from within
"test_client_main $::test_server_port "
Killing still running Redis server 746
Killing still running Redis server 789
Killing still running Redis server 941
Killing still running Redis server 1055
Killing still running Redis server 1191
Killing still running Redis server 1300
Killing still running Redis server 1406
Killing still running Redis server 1470
Killing still running Redis server 1485
Killing still running Redis server 1555
Killing still running Redis server 1570
Killing still running Redis server 1627
Killing still running Redis server 1650
Killing still running Redis server 1749
Killing still running Redis server 1814
Killing still running Redis server 1849
Killing still running Redis server 1936
Killing still running Redis server 2247
Killing still running Redis server 2368
Killing still running Redis server 2474
Killing still running Redis server 3483
Killing still running Redis server 3537
Killing still running Redis server 3586
Killing still running Redis server 3631
Killing still running Redis server 3749
Killing still running Redis server 3914
Killing still running Redis server 4104
Killing still running Redis server 4187
Killing still running Redis server 4264
Killing still running Redis server 4283
Killing still running Redis server 4730
Killing still running Redis server 4855
Killing still running Redis server 5242
Killing still running Redis server 5339
Killing still running Redis server 6005
Killing still running Redis server 6479
Killing still running Redis server 7997
Killing still running Redis server 8288
Killing still running Redis server 9110
Killing still running Redis server 9428
Killing still running Redis server 9490
Killing still running Redis server 9711
Killing still running Redis server 9766
Killing still running Redis server 10469
Killing still running Redis server 10776
Killing still running Redis server 11982
Killing still running Redis server 12076
Killing still running Redis server 17881
Killing still running Redis server 17990
Killing still running Redis server 18195
Killing still running Redis server 18209
Killing still running Redis server 18816
Killing still running Redis server 18879
 * ERROR: dev-db/redis-7.0.4::gentoo failed (test phase):
 *   Failed to run command: ./runtest --clients 32 --skiptest Active defrag eval scripts --skipunit unit/oom-score-adj --skiptest CONFIG SET rollback on apply error --tls
 * 
 * Call stack:
 *     ebuild.sh, line  127:  Called src_test
 *   environment, line 2380:  Called edo './runtest' '--clients' '32' '--skiptest' 'Active defrag eval scripts' '--skipunit' 'unit/oom-score-adj' '--skiptest' 'CONFIG SET rollback on apply error' '--tls'
 *   environment, line 1359:  Called die
 * The specific snippet of code:
 *       "$@" || die -n "Failed to run command: $@"
 * 
 * If you need support, post the output of `emerge --info '=dev-db/redis-7.0.4::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-db/redis-7.0.4::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/vbslogs/build/dev-db/redis-7.0.4:20220724-052902.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-db/redis-7.0.4/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-db/redis-7.0.4/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4'
 * S: '/var/tmp/portage/dev-db/redis-7.0.4/work/redis-7.0.4'