Linux version 2.6.16-rc1 (root@kresse) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP PREEMPT Mon Jan 23 15:31:09 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000effff000 (ACPI data) BIOS-e820: 00000000effff000 - 00000000f0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000110000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 1048576 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 819200 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 INTEL ) @ 0x000ff9b0 ACPI: RSDT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0000 ACPI: FADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0030 ACPI: MADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff00b0 ACPI: OEMR (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0140 ACPI: DSDT (v001 INTEL SWV25 0x00000100 INTL 0x20020918) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000) Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/sdb3 udev video=vesafb:nomtrr vga=0x317 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec81000) mapped IOAPIC to ffffa000 (fec81400) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3057.183 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3892976k/4194304k available (1950k kernel code, 37780k reserved, 705k data, 208k init, 3014592k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6120.05 BogoMIPS (lpj=3060025) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Checking 'hlt' instruction... OK. ACPI-0610: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0610: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope) CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6112.75 BogoMIPS (lpj=3056379) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Booting processor 2/6 eip 2000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6112.93 BogoMIPS (lpj=3056466) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Booting processor 3/7 eip 2000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6112.89 BogoMIPS (lpj=3056446) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Total of 4 processors activated (24458.63 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs migration_cost=10,769 checking if image is initramfs... it is Freeing initrd memory: 839k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 8) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:02:1d.0 IO window: 3000-4fff MEM window: fe700000-fe9fffff PREFETCH window: fc200000-fc2fffff PCI: Bridge: 0000:02:1f.0 IO window: 2000-2fff MEM window: fe600000-fe6fffff PREFETCH window: fc100000-fc1fffff PCI: Bridge: 0000:00:03.0 IO window: 2000-4fff MEM window: fe600000-feafffff PREFETCH window: fc100000-fc3fffff PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: fc500000-fe5fffff PREFETCH window: fc000000-fc0fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 Machine check exception polling timer started. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xfd000000, mapped to 0xf8880000, using 3072k, total 8128k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:4cae vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 16 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 17 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 50 (level, low) -> IRQ 18 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Vendor: IFT Model: IFT-7200 Rev: 231T Type: Direct-Access ANSI SCSI revision: 04 target0:0:1: asynchronous scsi0:A:1:0: Tagged Queuing enabled. Depth 48 target0:0:1: Beginning Domain Validation target0:0:1: wide asynchronous target0:0:1: Domain Validation skipping write tests target0:0:1: Ending Domain Validation ACPI: PCI Interrupt 0000:04:07.1[B] -> GSI 49 (level, low) -> IRQ 19 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Vendor: SEAGATE Model: ST3146807LC Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 target1:0:1: asynchronous scsi1:A:1:0: Tagged Queuing enabled. Depth 48 target1:0:1: Beginning Domain Validation target1:0:1: wide asynchronous target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63) target1:0:1: Ending Domain Validation Vendor: ESG-SHV Model: SCA HSBP M18 Rev: 0.07 Type: Processor ANSI SCSI revision: 02 target1:0:6: asynchronous target1:0:6: Beginning Domain Validation target1:0:6: Ending Domain Validation SCSI device sda: 1444319232 512-byte hdwr sectors (739491 MB) sda: Write Protect is off sda: Mode Sense: 87 00 00 08 SCSI device sda: drive cache: write through SCSI device sda: 1444319232 512-byte hdwr sectors (739491 MB) sda: Write Protect is off sda: Mode Sense: 87 00 00 08 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:1:0: Attached scsi disk sda SCSI device sdb: 286749488 512-byte hdwr sectors (146816 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: drive cache: write back w/ FUA SCSI device sdb: 286749488 512-byte hdwr sectors (146816 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: drive cache: write back w/ FUA sdb: sdb1 sdb2 sdb3 sd 1:0:1:0: Attached scsi disk sdb sd 0:0:1:0: Attached scsi generic sg0 type 0 sd 1:0:1:0: Attached scsi generic sg1 type 0 1:0:6:0: Attached scsi generic sg2 type 3 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode Freeing unused kernel memory: 208k freed usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005020 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ReiserFS: sdb3: found reiserfs format "3.6" with standard journal ReiserFS: sdb3: using ordered data mode ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb3: checking transaction log (sdb3) ReiserFS: sdb3: Using r5 hash to sort names Adding 4008208k swap on /dev/sdb2. Priority:-1 extents:1 across:4008208k ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names ReiserFS: sda1: Removing [262 1559308 0x0 SD]..done ReiserFS: sda1: Removing [262 1555273 0x0 SD]..done ReiserFS: sda1: Removing [262 1553815 0x0 SD]..done ReiserFS: sda1: Removing [54077 1553522 0x0 SD]..done ReiserFS: sda1: Removing [262 1549262 0x0 SD]..done ReiserFS: sda1: There were 5 uncompleted unlinks/truncates. Completed ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex Installing knfsd (copyright (C) 1996 okir@monad.swb.de).