Attachment 7794 Details for Bug 14887 – dmesg output of boot kernel

dmesg output of boot kernel

gentoo.boot.dmesg.out (text/plain), 15.01 KB, created by anthony on 2003-01-31 21:06:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: anthony

Created: 2003-01-31 21:06:24 UTC

Size: 15.01 KB

patch

obsolete

>4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
>Using ACPI (MADT) for SMP configuration information
>Kernel command line: initrd=initrd root=/dev/ram0 init=/linuxrc BOOT_IMAGE=gentoo noapic pci=noacpi
>Initializing CPU#0
>Detected 1526.875 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 3047.42 BogoMIPS
>Memory: 497840k/507840k available (2000k kernel code, 9612k reserved, 602k data, 116k init, 0k highmem)
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>Checking for popad bug... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
>CPU0: AMD mobile AMD Athlon(tm) XP 1800+ stepping 02
>per-CPU timeslice cutoff: 731.80 usecs.
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>Error: only one processor found.
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x31 pin1=2 pin2=0
>number of MP IRQ sources: 16.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>
>IO APIC #2......
>.... register #00: 02000000
>.......    : physical APIC id: 02
>.... register #01: 00178011
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 1
>.......     : IO APIC version: 0011
>.... register #02: 00000000
>.......     : arbitration: 00
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> 00 000 00  1    0    0   0   0    0    0    00
> 01 001 01  0    0    0   0   0    1    1    39
> 02 001 01  0    0    0   0   0    1    1    31
> 03 001 01  0    0    0   0   0    1    1    41
> 04 001 01  0    0    0   0   0    1    1    49
> 05 001 01  0    0    0   0   0    1    1    51
> 06 001 01  0    0    0   0   0    1    1    59
> 07 001 01  0    0    0   0   0    1    1    61
> 08 001 01  0    0    0   0   0    1    1    69
> 09 001 01  0    0    0   0   0    1    1    71
> 0a 001 01  0    0    0   0   0    1    1    79
> 0b 001 01  0    0    0   0   0    1    1    81
> 0c 001 01  0    0    0   0   0    1    1    89
> 0d 001 01  0    0    0   0   0    1    1    91
> 0e 001 01  0    0    0   0   0    1    1    99
> 0f 001 01  0    0    0   0   0    1    1    A1
> 10 000 00  1    0    0   0   0    0    0    00
> 11 000 00  1    0    0   0   0    0    0    00
> 12 000 00  1    0    0   0   0    0    0    00
> 13 000 00  1    0    0   0   0    0    0    00
> 14 000 00  1    0    0   0   0    0    0    00
> 15 000 00  1    0    0   0   0    0    0    00
> 16 000 00  1    0    0   0   0    0    0    00
> 17 000 00  1    0    0   0   0    0    0    00
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 1526.8657 MHz.
>..... host bus clock speed is 265.5419 MHz.
>cpu: 0, clocks: 2655419, slice: 1327709
>CPU0<T0:2655408,T1:1327696,D:3,S:1327709,C:2655419>
>Waiting on wait_init_idle (map = 0x0)
>All processors have done init_idle
>ACPI: Subsystem revision 20021212
>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9)
>    ACPI-0263: *** Info: GPE Block0 defined as GPE0 to GPE15
>    ACPI-0263: *** Info: GPE Block1 defined as GPE16 to GPE31
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: System [ACPI] (supports S0 S3 S4 S5)
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
>PCI: Probing PCI hardware
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16)
>00:00:01[A] -> 2-16 -> IRQ 16
>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17)
>00:00:01[B] -> 2-17 -> IRQ 17
>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18)
>00:00:01[C] -> 2-18 -> IRQ 18
>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19)
>00:00:01[D] -> 2-19 -> IRQ 19
>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23)
>00:00:02[A] -> 2-23 -> IRQ 23
>Pin 2-17 already programmed
>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21)
>00:00:02[C] -> 2-21 -> IRQ 21
>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd9 -> IRQ 20)
>00:00:02[D] -> 2-20 -> IRQ 20
>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22)
>00:00:03[A] -> 2-22 -> IRQ 22
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
>PCI: Via IRQ fixup for 00:08.1, from 10 to 2
>PCI: Via IRQ fixup for 00:08.0, from 5 to 1
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Starting kswapd
>Journalled Block Device driver loaded
>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
>devfs: boot_options: 0x0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Processor [CPU1] (supports C1, 8 throttling states)
>pty: 256 Unix98 ptys configured
>Real Time Clock Driver v1.10e
>Uniform Multi-Platform E-IDE driver Revision: 6.31
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller on PCI bus 00 dev 15
>SIS5513: chipset revision 208
>SIS5513: not 100% native mode: will probe irqs later
>SiS740
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
>hda: IC25N040ATCS04-0, ATA DISK drive
>hdc: QSI CD-RW/DVD-ROM SBW-081, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>blk: queue 803fa444, I/O limit 4095Mb (mask 0xffffffff)
>hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(33)
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.12
>Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>SCSI subsystem driver Revision: 1.00
>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-uhci.c: $Revision: 1.275 $ time 04:51:38 Jan  1 2003
>usb-uhci.c: High bandwidth mode enabled
>usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 18
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 17
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 2
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>usb.c: registered new driver hid
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
>hid-core.c: USB HID support drivers
>mice: PS/2 mouse device common for all mice
>evms: md raid5: measuring checksumming speed
>evms: md raid5:    8regs     :  2060.800 MB/sec
>evms: md raid5:    32regs    :  1702.000 MB/sec
>evms: md raid5:    pIII_sse  :  1830.800 MB/sec
>evms: md raid5:    pII_mmx   :  3568.000 MB/sec
>evms: md raid5:    p5_mmx    :  4559.600 MB/sec
>evms: md raid5: using function: pIII_sse (1830.800 MB/sec)
>evms: EVMS v1.2.1 initializing .... info level(5).
>evms: Exporting EVMS Volume(117,1) from "/dev/evms/hda1".
>evms: Exporting EVMS Volume(117,2) from "/dev/evms/hda2".
>evms: Exporting EVMS Volume(117,3) from "/dev/evms/hda5".
>evms: Exporting EVMS Volume(117,4) from "/dev/evms/hda6".
>evms: Exporting EVMS Volume(117,5) from "/dev/evms/hda7".
>evms: Exporting EVMS Volume(117,6) from "/dev/evms/hda8".
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 32768)
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>IPv6 v0.8 for NET4.0
>IPv6 over IPv4 tunneling driver
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 960k freed
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing unused kernel memory: 116k freed
>NCR53c406a: no available ports found
>aec671x_detect: 
>scsi: <fdomain> Detection failed (no card)
>megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
>megaraid: no BIOS enabled.
>hub.c: new USB device 00:08.1-1, assigned address 2
>DC390: 0 adapters found
>Failed initialization of WD-7000 SCSI card!
>DC395x (TRM-S1040) SCSI driver 1.41, 2002-06-21
>DC395x (TRM-S1040): 0 adapters found
>usb-uhci.c: interrupt, status 3, frame# 1826
>input0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb1:2.0
>hub.c: new USB device 00:08.0-1, assigned address 2
>usb-uhci.c: interrupt, status 3, frame# 252
>input1: USB HID v1.00 Gamepad [Microsoft® Microsoft® SideWinder® Game Pad USB] on usb2:2.0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>cloop: Welcome to cloop v0.66
>cloop: /newroot/mnt/cdrom/livecd.cloop: 1251 blocks, 65536 bytes/block, largest block is 55710 bytes.
>3c505.c: warning, using default DMA channel,
>3c505.c: module autoprobe not recommended, give io=xx.
>3c505.c: Failed to register card at 0x0.
>3c507: register_netdev() returned non-zero.
>3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
>0 3c515 cards found.
>ac3200.c: No ac3200 card found (i/o = 0x0).
>aironet4500.c v0.1 1/1/99 Elmer Joandi, elmer@ylenurme.ee.
>arlan: no devices found 
>at1700: register_netdev() returned non-zero.
>atp.c:v1.09 8/9/2000 Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/atp.html
>cs89x0.c: Module autoprobing not allowed.
>cs89x0.c: Append io=0xNNN
>eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
>D-Link DE-620 pocket adapter not identified in the printer port
>eth0: depca_probe() cannot find device at 0x0200.
>dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
>FW Version=$Version$
>dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
>e2100.c: Presently autoprobing (not recommended) for a single card.
>e2100.c: No E2100 card found (i/o = 0x0).
>eepro_init_module: Probe is very dangerous in ISA boards!
>eepro_init_module: Please add "autodetect=1" to force probe
>eexpress.c: Module autoprobe not recommended, give io=xx.
>eexpress.c: Failed to register card at 0x0.
>eth16i.c: Presently autoprobing (not recommended) for a single card.
>eth16i.c No Eth16i card found (i/o = 0x0).
>eth0: ewrk3_probe() cannot find device at 0x0300.
>hamachi.c:v1.01+LK1.0.1 5/18/2001  Written by Donald Becker
>   Some modifications by Eric kasten <kasten@nscl.msu.edu>
>   Further modifications by Keith Underwood <keithu@parl.clemson.edu>
>hp-plus.c: Presently autoprobing (not recommended) for a single card.
>hp-plus.c: No HP-Plus card found (i/o = 0x0).
>hp.c: Presently autoprobing (not recommended) for a single card.
>hp.c: No HP card found (i/o = 0x0).
>lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
>eth0: i82596 initialization timed out
>natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
>  originally by Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/natsemi.html
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
>  http://www.scyld.com/network/ne2k-pci.html
>NI5010: Autoprobing for modules is hazardous, trying anyway..
>ni52: Autoprobing not allowed for modules.
>ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'
>ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
>pcnet32.c:v1.27b 01.10.2002 tsbogend@alpha.franken.de
>sis900.c: v1.08.06 9/24/2002
>eth0: Realtek RTL8201 PHY transceiver found at address 1.
>eth0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 22, 00:50:eb:0e:63:5f.
>CSLIP: code copyright 1989 Regents of the University of California
>SMC9194: You shouldn't use auto-probing with insmod!
>starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>
> (unofficial 2.2/2.4 kernel port, version 1.03+LK1.3.6, March 7, 2002)
>STRIP: Version 1.3-STUART.CHESHIRE-MODULAR (unlimited channels)
>sundance.c:v1.01+LK1.06b 6-Nov-2002  Written by Donald Becker
>  http://www.scyld.com/network/sundance.html
>ThunderLAN driver v1.15
>TLAN: 0 devices installed, PCI: 0  EISA: 0
>via-rhine.c:v1.10-LK1.1.14  May-3-2002  Written by Donald Becker
>  http://www.scyld.com/network/via-rhine.html
>WaveLAN init_module(): doing device probing (bad !)
>Specify base addresses while loading module to correct the problem
>WaveLAN init_module(): no device found
>wd.c: Presently autoprobing (not recommended) for a single card.
>wd.c: No wd80x3 card found (i/o = 0x0).
>winbond-840.c:v1.01-d (2.4 port) Nov-17-2001  Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/drivers.html
>yellowfin.c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/yellowfin.html
>  (unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
>reiserfs: checking transaction log (device 03:07) ...
>Using r5 hash to sort names
>ReiserFS version 3.6.25
>reiserfs: checking transaction log (device 03:08) ...
>Using r5 hash to sort names
>ReiserFS version 3.6.25

Actions: View

Attachments on bug 14887: 7794