Linux version 2.6.11-hardened-r15 (root@kresse) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Wed Jul 27 10:33:06 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000effff000 (ACPI data) BIOS-e820: 00000000effff000 - 00000000f0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000110000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 1048576 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 819200 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v000 INTEL ) @ 0x000ff9b0 ACPI: RSDT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0000 ACPI: FADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0030 ACPI: MADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff00b0 ACPI: OEMR (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0140 ACPI: DSDT (v001 INTEL SWV25 0x00000100 INTL 0x20020918) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: SWV25 APIC at: 0xFEE00000 I/O APIC #8 Version 32 at 0xFEC00000. I/O APIC #9 Version 32 at 0xFEC81000. I/O APIC #10 Version 32 at 0xFEC81400. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 4 Allocating PCI resources starting at f0000000 (gap: f0000000:0ec00000) Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/sdb3 video=vesafb:nomtrr vga=0x317 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec81000) mapped IOAPIC to ffffa000 (fec81400) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3057.146 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3892544k/4194304k available (2284k kernel code, 38436k reserved, 595k data, 220k init, 3014592k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6029.31 BogoMIPS (lpj=3014656) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 per-CPU timeslice cutoff: 1462.68 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay loop... 6094.84 BogoMIPS (lpj=3047424) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Booting processor 2/6 eip 2000 Initializing CPU#2 Calibrating delay loop... 6094.84 BogoMIPS (lpj=3047424) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Booting processor 3/7 eip 2000 Initializing CPU#3 Calibrating delay loop... 6094.84 BogoMIPS (lpj=3047424) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09 Total of 4 processors activated (24313.85 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs CPU0 attaching sched-domain: domain 0: span f groups: 1 2 4 8 CPU1 attaching sched-domain: domain 0: span f groups: 2 4 8 1 CPU2 attaching sched-domain: domain 0: span f groups: 4 8 1 2 CPU3 attaching sched-domain: domain 0: span f groups: 8 1 2 4 checking if image is initramfs... it is Freeing initrd memory: 712k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2480] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:04:07.0[A] -> IRQ 50 PCI->APIC IRQ transform: 0000:04:07.1[B] -> IRQ 49 PCI->APIC IRQ transform: 0000:03:07.0[A] -> IRQ 30 PCI->APIC IRQ transform: 0000:03:07.1[B] -> IRQ 31 PCI->APIC IRQ transform: 0000:01:0c.0[A] -> IRQ 17 Machine check exception polling timer started. highmem bounce pool size: 64 pages inotify device minor=63 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API vesafb: framebuffer at 0xfd000000, mapped to 0xf8800000, using 3072k, total 8128k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:4cae vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2 Copyright (c) 1999-2004 Intel Corporation. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit) Vendor: IFT Model: IFT-7200 Rev: 231T Type: Direct-Access ANSI SCSI revision: 04 scsi0:A:1:0: Tagged Queuing enabled. Depth 48 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi1:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: SEAGATE Model: ST3146807LC Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:1:0: Tagged Queuing enabled. Depth 48 Vendor: ESG-SHV Model: SCA HSBP M18 Rev: 0.07 Type: Processor ANSI SCSI revision: 02 SCSI device sda: 1444319232 512-byte hdwr sectors (739491 MB) SCSI device sda: drive cache: write through SCSI device sda: 1444319232 512-byte hdwr sectors (739491 MB) SCSI device sda: drive cache: write through /dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 SCSI device sdb: 286749488 512-byte hdwr sectors (146816 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 286749488 512-byte hdwr sectors (146816 MB) SCSI device sdb: drive cache: write back /dev/scsi/host1/bus0/target1/lun0: p1 p2 p3 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 1, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 6, lun 0, type 3 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 256Kbytes TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Freeing unused kernel memory: 220k freed usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0x5020 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0x5000 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ReiserFS: sdb3: found reiserfs format "3.6" with standard journal ReiserFS: sdb3: using ordered data mode ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb3: checking transaction log (sdb3) ReiserFS: sdb3: Using r5 hash to sort names Adding 4008208k swap on /dev/sdb2. Priority:-1 extents:1 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex Installing knfsd (copyright (C) 1996 okir@monad.swb.de). nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel