Bad dmesg

dmesg.bad (text/plain), 5.30 KB, created by Mike Pagano on 2022-04-12 19:26:35 UTC

[   90.070098] elogind-daemon[1273]: Suspending system...
[   90.070102] PM: suspend entry (deep)
[   90.074207] Filesystems sync: 0.004 seconds
[   90.074311] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   90.075480] OOM killer disabled.
[   90.075480] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   90.076591] printk: Suspending console(s) (use no_console_suspend to debug)
[   90.077155] serial 00:04: disabled
[   90.131829] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[   90.132435] sd 5:0:0:0: [sdb] Stopping disk
[   90.161829] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   90.164949] sd 1:0:0:0: [sda] Stopping disk
[   90.425256] amdgpu 0000:0f:00.0: amdgpu: BACO reset
[   90.922490] ACPI: EC: interrupt blocked
[   91.071845] ACPI: PM: Preparing to enter system sleep state S3
[   91.392046] ACPI: EC: event blocked
[   91.392046] ACPI: EC: EC stopped
[   91.392047] ACPI: PM: Saving platform NVS memory
[   91.392067] Disabling non-boot CPUs ...
[   91.393772] smpboot: CPU 1 is now offline
[   91.395454] smpboot: CPU 2 is now offline
[   91.397118] smpboot: CPU 3 is now offline
[   91.398636] smpboot: CPU 4 is now offline
[   91.400039] smpboot: CPU 5 is now offline
[   91.401436] smpboot: CPU 6 is now offline
[   91.402807] smpboot: CPU 7 is now offline
[   91.404152] smpboot: CPU 8 is now offline
[   91.405461] smpboot: CPU 9 is now offline
[   91.406673] smpboot: CPU 10 is now offline
[   91.407897] smpboot: CPU 11 is now offline
[   91.408276] ACPI: PM: Low-level resume complete
[   91.408294] ACPI: EC: EC started
[   91.408294] ACPI: PM: Restoring platform NVS memory
[   91.408396] LVT offset 0 assigned for vector 0x400
[   91.408858] Enabling non-boot CPUs ...
[   91.408899] x86: Booting SMP configuration:
[   91.408900] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   91.409030] microcode: CPU1: patch_level=0x08701021
[   91.412540] CPU1 is up
[   91.412558] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   91.412666] microcode: CPU2: patch_level=0x08701021
[   91.422570] CPU2 is up
[   91.422590] smpboot: Booting Node 0 Processor 3 APIC 0x8
[   91.422700] microcode: CPU3: patch_level=0x08701021
[   91.432623] CPU3 is up
[   91.432645] smpboot: Booting Node 0 Processor 4 APIC 0xa
[   91.432756] microcode: CPU4: patch_level=0x08701021
[   91.442661] CPU4 is up
[   91.442690] smpboot: Booting Node 0 Processor 5 APIC 0xc
[   91.442800] microcode: CPU5: patch_level=0x08701021
[   91.452705] CPU5 is up
[   91.452728] smpboot: Booting Node 0 Processor 6 APIC 0x1
[   91.452841] microcode: CPU6: patch_level=0x08701021
[   91.462752] CPU6 is up
[   91.462773] smpboot: Booting Node 0 Processor 7 APIC 0x3
[   91.462916] microcode: CPU7: patch_level=0x08701021
[   91.472796] CPU7 is up
[   91.472827] smpboot: Booting Node 0 Processor 8 APIC 0x5
[   91.472940] microcode: CPU8: patch_level=0x08701021
[   91.482865] CPU8 is up
[   91.482886] smpboot: Booting Node 0 Processor 9 APIC 0x9
[   91.482994] microcode: CPU9: patch_level=0x08701021
[   91.492939] CPU9 is up
[   91.492962] smpboot: Booting Node 0 Processor 10 APIC 0xb
[   91.493068] microcode: CPU10: patch_level=0x08701021
[   91.502968] CPU10 is up
[   91.502988] smpboot: Booting Node 0 Processor 11 APIC 0xd
[   91.503096] microcode: CPU11: patch_level=0x08701021
[   91.513039] CPU11 is up
[   91.513780] ACPI: PM: Waking up from system sleep state S3
[   91.514273] ACPI: EC: interrupt unblocked
[   91.633051] ACPI: EC: event unblocked
[   91.633112] xhci_hcd 0000:08:00.0: xHC error in resume, USBSTS 0x401, Reinit
[   91.633115] usb usb1: root hub lost power or was reset
[   91.633117] usb usb2: root hub lost power or was reset
[   91.633557] serial 00:04: activated
[   91.688452] sd 1:0:0:0: [sda] Starting disk
[   91.688494] sd 5:0:0:0: [sdb] Starting disk
[   91.766690] nvme nvme0: 16/0/0 default/read/poll queues
[   91.792461] [drm] PCIE GART of 256M enabled (table at 0x000000F400E10000).
[   91.963675] ata1: SATA link down (SStatus 0 SControl 300)
[   91.973669] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   91.973691] ata5: SATA link down (SStatus 0 SControl 330)
[   91.974330] ata6.00: supports DRM functions and may not be fully accessible
[   91.975090] ata6.00: supports DRM functions and may not be fully accessible
[   91.975752] ata6.00: configured for UDMA/133
[   92.062616] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[   92.452623] usb 1-5: reset low-speed USB device number 4 using xhci_hcd
[   92.602513] [drm] Fence fallback timer expired on ring sdma0
[   92.702616] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[   92.892617] usb 1-6: reset full-speed USB device number 5 using xhci_hcd
[   93.122524] [drm] Fence fallback timer expired on ring sdma0
[   93.632533] [drm] Fence fallback timer expired on ring sdma0
[   93.662103] [drm] UVD and UVD ENC initialized successfully.
[   93.763057] [drm] VCE initialized successfully.
[   94.633127] igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   97.032602] ata2: link is slow to respond, please be patient (ready=0)
[   99.792668] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   99.795701] ata2.00: configured for UDMA/133
[   99.812806] OOM killer enabled.
[   99.812808] Restarting tasks ... done.
[   99.813100] PM: suspend exit
[   99.813119] elogind-daemon[1273]: System resumed.