Good dmesg

dmesg.good (text/plain), 5.12 KB, created by Mike Pagano on 2022-04-12 19:26:18 UTC

[   24.449247] elogind-daemon[1284]: Suspending system...
[   24.449251] PM: suspend entry (deep)
[   24.488626] Filesystems sync: 0.039 seconds
[   24.488734] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   24.489868] OOM killer disabled.
[   24.489869] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   24.490971] printk: Suspending console(s) (use no_console_suspend to debug)
[   24.491470] serial 00:04: disabled
[   24.567380] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   24.567536] sd 1:0:0:0: [sda] Stopping disk
[   24.576867] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[   24.577469] sd 5:0:0:0: [sdb] Stopping disk
[   24.873343] amdgpu 0000:0f:00.0: amdgpu: BACO reset
[   25.377578] ACPI: EC: interrupt blocked
[   25.517414] ACPI: PM: Preparing to enter system sleep state S3
[   25.837301] ACPI: EC: event blocked
[   25.837301] ACPI: EC: EC stopped
[   25.837302] ACPI: PM: Saving platform NVS memory
[   25.837311] Disabling non-boot CPUs ...
[   25.839030] smpboot: CPU 1 is now offline
[   25.840863] smpboot: CPU 2 is now offline
[   25.842504] smpboot: CPU 3 is now offline
[   25.844201] smpboot: CPU 4 is now offline
[   25.845829] smpboot: CPU 5 is now offline
[   25.847393] smpboot: CPU 6 is now offline
[   25.848821] smpboot: CPU 7 is now offline
[   25.850200] smpboot: CPU 8 is now offline
[   25.851584] smpboot: CPU 9 is now offline
[   25.852975] smpboot: CPU 10 is now offline
[   25.854400] smpboot: CPU 11 is now offline
[   25.854840] ACPI: PM: Low-level resume complete
[   25.854857] ACPI: EC: EC started
[   25.854858] ACPI: PM: Restoring platform NVS memory
[   25.854959] LVT offset 0 assigned for vector 0x400
[   25.855427] Enabling non-boot CPUs ...
[   25.855469] x86: Booting SMP configuration:
[   25.855470] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   25.855599] microcode: CPU1: patch_level=0x08701021
[   25.858113] CPU1 is up
[   25.858133] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   25.858237] microcode: CPU2: patch_level=0x08701021
[   25.867853] CPU2 is up
[   25.867881] smpboot: Booting Node 0 Processor 3 APIC 0x8
[   25.867992] microcode: CPU3: patch_level=0x08701021
[   25.877907] CPU3 is up
[   25.877934] smpboot: Booting Node 0 Processor 4 APIC 0xa
[   25.878043] microcode: CPU4: patch_level=0x08701021
[   25.887948] CPU4 is up
[   25.887971] smpboot: Booting Node 0 Processor 5 APIC 0xc
[   25.888080] microcode: CPU5: patch_level=0x08701021
[   25.897984] CPU5 is up
[   25.898008] smpboot: Booting Node 0 Processor 6 APIC 0x1
[   25.898121] microcode: CPU6: patch_level=0x08701021
[   25.908044] CPU6 is up
[   25.908068] smpboot: Booting Node 0 Processor 7 APIC 0x3
[   25.908212] microcode: CPU7: patch_level=0x08701021
[   25.918078] CPU7 is up
[   25.918109] smpboot: Booting Node 0 Processor 8 APIC 0x5
[   25.918220] microcode: CPU8: patch_level=0x08701021
[   25.928158] CPU8 is up
[   25.928178] smpboot: Booting Node 0 Processor 9 APIC 0x9
[   25.928288] microcode: CPU9: patch_level=0x08701021
[   25.938225] CPU9 is up
[   25.938249] smpboot: Booting Node 0 Processor 10 APIC 0xb
[   25.938364] microcode: CPU10: patch_level=0x08701021
[   25.948269] CPU10 is up
[   25.948293] smpboot: Booting Node 0 Processor 11 APIC 0xd
[   25.948399] microcode: CPU11: patch_level=0x08701021
[   25.958342] CPU11 is up
[   25.959162] ACPI: PM: Waking up from system sleep state S3
[   25.959657] ACPI: EC: interrupt unblocked
[   26.078360] ACPI: EC: event unblocked
[   26.078414] xhci_hcd 0000:08:00.0: xHC error in resume, USBSTS 0x401, Reinit
[   26.078418] usb usb1: root hub lost power or was reset
[   26.078419] usb usb2: root hub lost power or was reset
[   26.078674] sd 1:0:0:0: [sda] Starting disk
[   26.078675] sd 5:0:0:0: [sdb] Starting disk
[   26.078931] serial 00:04: activated
[   26.212010] nvme nvme0: 16/0/0 default/read/poll queues
[   26.237933] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[   26.409040] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   26.409062] ata5: SATA link down (SStatus 0 SControl 330)
[   26.409701] ata6.00: supports DRM functions and may not be fully accessible
[   26.410464] ata6.00: supports DRM functions and may not be fully accessible
[   26.411125] ata6.00: configured for UDMA/133
[   26.419033] ata1: SATA link down (SStatus 0 SControl 300)
[   26.638034] usb 1-5: reset low-speed USB device number 4 using xhci_hcd
[   26.888055] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[   27.057982] [drm] Fence fallback timer expired on ring sdma0
[   27.078085] usb 1-6: reset full-speed USB device number 5 using xhci_hcd
[   27.318135] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[   27.568071] [drm] Fence fallback timer expired on ring sdma0
[   28.088162] [drm] Fence fallback timer expired on ring sdma0
[   28.118443] [drm] UVD and UVD ENC initialized successfully.
[   28.219393] [drm] VCE initialized successfully.
[   28.228911] OOM killer enabled.
[   28.228913] Restarting tasks ... done.
[   28.229364] PM: suspend exit
[   28.229382] elogind-daemon[1284]: System resumed.
[   29.008899] igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX