speedtouch-usb-3.0.1.2.ebuild ( another approach )

speedtouch-usb-3.0.1.2.ebuild (text/plain), 2.51 KB, created by Elie Morisse on 2005-12-31 03:41:05 UTC

# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

inherit eutils linux-info

DESCRIPTION="Kernel-space driver for Alcatel SpeedTouch USB modems"
HOMEPAGE="http://www.speedtouch.com/"
SRC_URI="http://www.speedtouch.com/download/drivers/USB/SpeedTouch330_firmware_${PV//./}.zip
	http://download.ethomson.com/download/speedmgmt.tar.gz
	http://www.linux-usb.org/SpeedTouch/firmware/firmware-extractor.tar.gz"

LICENSE="SpeedTouch-USB-Firmware" #taken from http://www.speedtouch.com/driver_upgrade_lx_${PV}.htm
SLOT="0"
KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
IUSE=""

DEPEND="app-arch/unzip
	sys-apps/coreutils"

RDEPEND="net-dialup/ppp
	>=sys-apps/baselayout-1.11.13-r1
	>=sys-fs/udev-068-r1
	!net-dialup/speedtouch"

S="${WORKDIR}/firmware-extractor"

pkg_setup() {
	if kernel_is lt 2 6 10 ; then
		eerror "The kernel-space driver exists only in kernels >= 2.6.10."
		eerror "Please emerge net-dialup/speedtouch instead or upgrade the kernel."
		die "Unsupported kernel version"
	fi
}

pkg_config() {
	CONFIG_CHECK="KOBJECT_UEVENT !STANDALONE FW_LOADER NET PACKET ATM NETDEVICES \
		PPP ~PPP_DEFLATE ~PPP_BSDCOMP PPPOATM USB USB_DEVICEFS USB_ATM USB_SPEEDTOUCH"
	check_extra_config
	echo
	
	einfo "Check pppd support for PPPoA"
	if ! built_with_use net-dialup/ppp atm; then
		eerror "net-dialup/ppp should be built with PPP over ATM support enabled."
		eerror "Run the following command and try again:"
		eerror "  euse -E atm && emerge net-dialup/ppp"
		return 1
	fi

	return 0
}

src_compile() {
	gcc -o firmware-extractor firmware.c || die "firmware-extractor compile failed"
}

src_install() {
	local FILE_VER="${PV#*.}"
	FILE_VER="${PV%%.*}.${FILE_VER//./}" # {major_ver}.{minor_digits}

	einfo "Extracting firmware files"
	./firmware-extractor ../mgmt/mgmt.o
	mv speedtch-1.bin speedtch-1.bin.0.00
	mv speedtch-2.bin speedtch-2.bin.0.00
	./firmware-extractor ../KQD6_${FILE_VER}
	mv speedtch-1.bin speedtch-1.bin.2.00
	mv speedtch-2.bin speedtch-2.bin.2.00
	./firmware-extractor ../ZZZL_${FILE_VER}
	mv speedtch-1.bin speedtch-1.bin.4.00
	mv speedtch-2.bin speedtch-2.bin.4.00

	# Copy to the firmware directory
	insinto /lib/firmware
	insopts -m 600
	doins ${S}/speedtch-1.bin.0.00
	doins ${S}/speedtch-2.bin.0.00
	doins ${S}/speedtch-1.bin.2.00
	doins ${S}/speedtch-2.bin.2.00
	doins ${S}/speedtch-1.bin.4.00
	doins ${S}/speedtch-2.bin.4.00

	# Docs
	#dodoc ${FILESDIR}/README
}

pkg_postinst() {
	einfo "To complete the installation, you must read the documentation in"
	einfo "/usr/share/doc/${PF}"
}