My kdm.log

kdm.log (text/plain), 2.96 KB, created by Thomas Schlesinger on 2005-12-09 08:41:39 UTC

GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x20100000
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x20100000
pcibios_init : BIOS32 Service Directory structure at 0xp
pcibios_init : BIOS32 Service Directory entry at 0xfdb10
pcibios_init : PCI BIOS revision 2.10 entry at 0xfdb31
Probing PCI hardware.
ide: SiS 5513 (dual FIFO) DMA Bus Mastering IDE 
    Controller on PCI bus 0 function 21
    ide0: BM-DMA at 0xff00-0xff07
    ide1: BM-DMA at 0xff08-0xff0f
hd0: Maxtor 2F040L0, 39205MB w/2048kB Cache, CHS=4998/255/63
hd1: WDC WD2000JB-00GVA0, 131071MB w/8192kB Cache, CHS=16709/255/63
hd2: _NEC DV-5700B, ATAPI CDROM drive
hd3: R/RW 12x8x32, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa:     SPP port present
ppa:     ECP with a i byte FIFO present
ppa:     PS/2 bidirectional port present
ppa:     Passed Intel bug check.
ppa:     EPP 1.9 with hardware direction protocol
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, [e-mail].
 http://www.scyld.com/network/rtl8139.html
sis900.c: modified v1.06.11  4/30/2002
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11,  0: b:6a:5f:39:ec.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <[e-mail]>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
RV¾è(^¿øf‹-ƒ}: wavelan_probe(): invalid base address
RV¾è(^¿øf‹-ƒ}: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2 hd0s3
 hd1: hd1s1 hd1s2 hd1s3 hd1s4
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)

module 0: /hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume) 
module 1: /lib/ld.so.1 /hurd/exec $(exec-task=task-create)                                                                                                                                                                     
2 multiboot modules                                                                                                                                                                                                                      task loaded: /hurd/ext2fs.static --multiboot-command-line=/boot/gnumach-dbg.gz root=device:hd0s1 --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec

start /hurd/ext2fs.static: eth0: Media Link On 100mbps full-duplex