Dmesg output

dmesg (text/plain), 15.08 KB, created by jason fuchs on 2005-11-29 16:09:24 UTC

able entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903160k/917504k available (2818k kernel code, 13792k reserved, 754k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4393.46 BogoMIPS (lpj=8786939)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs... it is
Freeing initrd memory: 1816k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 33)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:00: ioport range 0x8000-0x807f could not be reserved
pnp: 00:00: ioport range 0x8080-0x80ff has been reserved
pnp: 00:00: ioport range 0x8400-0x847f has been reserved
pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved
pnp: 00:00: ioport range 0x8800-0x887f has been reserved
pnp: 00:00: ioport range 0x8880-0x88ff has been reserved
pnp: 00:00: ioport range 0x2040-0x207f has been reserved
pnp: 00:00: ioport range 0x2000-0x203f has been reserved
PCI: Failed to allocate mem resource #10:2000000@e2000000 for 0000:02:04.0
PCI: Failed to allocate mem resource #10:2000000@e2000000 for 0000:02:04.1
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 50000000-51ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
  IO window: 00003800-000038ff
  IO window: 00003c00-00003cff
  PREFETCH window: 52000000-53ffffff
PCI: Bridge: 0000:00:0a.0
  IO window: 3000-7fff
  MEM window: e0100000-e17fffff
  PREFETCH window: 50000000-53ffffff
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: e2000000-e2ffffff
  PREFETCH window: f0000000-f80fffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1133279311.692:1): initialized
Installing knfsd (copyright (C) 1996 [e-mail]).
Initializing Cryptographic API
Real Time Clock Driver v1.12
vesafb: NVIDIA Corporation, NV17 Board - m17refnz, Chip Rev A5 (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware doesn't support DDC transfers
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 200x75
fbsplash: console 0 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 65536k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (67 C)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:06.1 disabled
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe ([e-mail]) and [e-mail]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:44:b4:77, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
    ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: FUJITSU MHT2040AT PL, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SD-R6252, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1313 $ Ben Collins <[e-mail]>
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[e0108000-e01087ff]  Max Packet=[2048]
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC).
ALSA device list:
  No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.3 (7168 buckets, 57344 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[e-mail]>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xe, vid 0x0
powernow-k8: ph2 null fid transition 0xe
Using IPI Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices: 
USB0 USB1 USB2 PS2K PS2M MAC0 
ACPI: (supports S0 S3 S4 S5)
Open file /dev/hda1 returned fffffffe.
Suspend2 2.2-rc13: No matching enabled writer found. Suspending disabled.
Suspend2 2.2-rc13: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 180k freed
kjournald starting.  Commit interval 5 seconds
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[4c3f02004c3f0200]
Adding 313256k swap on /dev/hda2.  Priority:-1 extents:1 across:313256k
EXT3 FS on hda1, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0000:00:02.0 (0004 -> 0006)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 11, io mem 0xe0000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:02.1 (0004 -> 0006)
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 10, io mem 0xe0001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 10, io mem 0xe0004000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:02.1: wakeup
Initializing USB Mass Storage driver...
usb 2-2: new full speed USB device using ohci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
ndiswrapper version 1.5 loaded (preempt=yes,smp=no)
ndiswrapper: driver bcmwl5 (Broadcom,04/21/2005, 3.100.65.1) loaded
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ndiswrapper: using irq 11
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:90:4b:9f:1f:7e using driver bcmwl5, 14E4:4320:103C:12F4.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
fbsplash: console 1 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 5
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 55462 usecs
intel8x0: clocking to 48000
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34359474184, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34351069192, limit=77521437
attempt to access beyond end of device
hda1: rw=0, want=34300639240, limit=77521437