[patch] lirc-0.7.3_pre1.ebuild.patch

lirc-0.7.3_pre1.ebuild.patch (text/plain), 7.71 KB, created by Doug Goldstein (RETIRED) on 2005-11-17 23:48:38 UTC

--- /usr/portage/app-misc/lirc/lirc-0.7.2.ebuild	2005-08-23 06:43:47.000000000 -0400
+++ lirc-0.7.3_pre1.ebuild	2005-11-18 02:46:22.000000000 -0500
@@ -2,66 +2,84 @@
 # Distributed under the terms of the GNU General Public License v2
 # $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.7.2.ebuild,v 1.1 2005/08/23 10:43:47 lanius Exp $
 
-inherit eutils linux-mod flag-o-matic
+inherit eutils linux-mod flag-o-matic autotools
 
 DESCRIPTION="LIRC is a package that allows you to decode and send infra-red \
 	signals of many (but not all) commonly used remote controls."
 HOMEPAGE="http://www.lirc.org"
 
-# LIRC_OPTS = ???? v
-# This are the defaults. With this support for all supported remotes
-# will be build.
-# If you want other options then set the Environment variable to your needs.
-
-# Note: If you don't specify the driver configure becomes interactiv.
-
-# You have to know, which driver you want;
-# --with-driver=X
-
-# where X is one of:
-# none, any, act200l, animax, atilibusb,
-# atiusb, audio, avermedia, avermedia_vdomate,
-# avermedia98, bestbuy, bestbuy2, breakoutbox,
-# bte, caraca, chronos, comX,
-# creative_infracd, dsp, cph03x, cph06x,
-# creative, devinput, exaudio, flyvideo,
-# gvbctv5pci, hauppauge, hauppauge_dvb,
-# hercules_smarttv_stereo, igorplugusb, irdeo,
-# irdeo_remote, irman, irreal, it87, knc_one,
-# kworld, leadtek_0007, leadtek_0010,
-# livedrive_midi, livedrive_seq, logitech,
-# lptX, mceusb, mediafocusI, mp3anywhere,
-# packard_bell, parallel, pcmak, pcmak_usb,
-# pctv, pixelview_bt878, pixelview_pak,
-# pixelview_pro, provideo, realmagic,
-# remotemaster, sa1100, sasem, serial,
-# silitek, sir, slinke, tekram, tekram_bt829,
-# tira, tvbox, udp, uirt2, uirt2_raw"
-# winfast_tv2000 is now leadtek_0010
-# streamzap
-
-# This could be usefull too
-
-# --with-port=port	# port number for the lirc device.
-# --with-irq=irq	# irq line for the lirc device.
-# --with-timer=value	# timer value for the parallel driver
-# --with-tty=file	# tty to use (Irman, RemoteMaster, etc.)
-# --without-soft-carrier	# if your serial hw generates carrier
-# --with-transmitter	# if you use a transmitter diode
-
 SLOT="0"
 LICENSE="GPL-2"
-IUSE="debug doc X"
+IUSE="alsa debug doc X usb"
 KEYWORDS="~x86 ~ppc ~alpha ~ia64 ~amd64 ~ppc64"
 
 RDEPEND="virtual/libc
-	X? ( virtual/x11 )"
+	virtual/modutils
+	sys-apps/coreutils
+	alsa? ( media-libs/alsa-lib )
+	usb? ( dev-libs/libusb )
+	X? ( ||(	x11-libs/libX11
+			x11-libs/libSM
+			x11-libs/libICE )			
+	virtual/x11 )"
 
-DEPEND="virtual/linux-sources
+DEPEND="${RDEPEND}
+	sys-kernel/linux-headers
 	sys-devel/autoconf
-	${RDEPEND}"
+	sys-devel/libtool"
+
+#SRC_URI="mirror://sourceforge/lirc/${P/_pre/pre}.tar.bz2"
+SRC_URI="http://lirc.sourceforge.net/software/snapshots/lirc-0.7.3pre1.tar.bz2"
+
+S=${WORKDIR}/${P/_pre/pre}
 
-SRC_URI="mirror://sourceforge/lirc/${P}.tar.bz2"
+pkg_setup() {
+	linux-mod_pkg_setup
+	
+	if [ "x${LIRC_OPTS}" = x ] ; then
+		echo
+		ewarn "By default this package will not compile a driver for your hardware"
+		ewarn "unless you specify LIRC_OPTS. The best place to save this is in"
+		ewarn "/etc/make.conf"
+		ewarn "For example, PVR-x50 users should add the following to /etc/make.conf"
+		ewarn "LIRC_OPTS=\"--with-driver=hauppauge\""
+		echo
+		ewarn "Possible options are listed below:"
+		echo
+		cat <<-EOF
+# You have to know, which driver you want;
+# --with-driver=X
+
+# where X is one of:
+# none, any, act200l, animax, atilibusb, atiusb, audio, avermedia, avermedia_vdomate,
+# avermedia98, bestbuy, bestbuy2, breakoutbox, bte, caraca, chronos, comX,
+# creative_infracd, dsp, cph03x, cph06x, creative, devinput, exaudio, flyvideo,
+# gvbctv5pci, hauppauge, hauppauge_dvb, hercules_smarttv_stereo, igorplugusb, irdeo,
+# irdeo_remote, irman, irreal, it87, knc_one, kworld, leadtek_0007, leadtek_0010,
+# livedrive_midi, livedrive_seq, logitech, lptX, mceusb, mediafocusI, mp3anywhere,
+# packard_bell, parallel, pcmak, pcmak_usb, pctv, pixelview_bt878, pixelview_pak,
+# pixelview_pro, provideo, realmagic, remotemaster, sa1100, sasem, serial,
+# silitek, sir, slinke, tekram, tekram_bt829, tira, tvbox, udp, uirt2, uirt2_raw
+# winfast_tv2000 is now leadtek_0010, streamzap
+
+# This could be useful too
+
+# --with-port=port      # port number for the lirc device.
+# --with-irq=irq        # irq line for the lirc device.
+# --with-timer=value    # timer value for the parallel driver
+# --with-tty=file       # tty to use (Irman, RemoteMaster, etc.)
+# --without-soft-carrier        # if your serial hw generates carrier
+
+# --with-port=port      # port number for the lirc device.
+# --with-irq=irq        # irq line for the lirc device.
+# --with-timer=value    # timer value for the parallel driver
+# --with-tty=file       # tty to use (Irman, RemoteMaster, etc.)
+# --without-soft-carrier        # if your serial hw generates carrier
+# --with-transmitter    # if you use a transmitter diode
+		EOF
+		sleep 5
+	fi
+}
 
 src_unpack() {
 	unpack ${A}
@@ -69,59 +87,48 @@
 	#epatch ${FILESDIR}/lirc-0.7.0-xbox.patch.bz2
 
 	filter-flags -Wl,-O1
-	sed	-i -e "s:-O2 -g:${CFLAGS}:" configure configure.in
+	sed -i -e 's:CFLAGS="-O2:CFLAGS=""\n#CFLAGS="-O2:' configure.in
 
-	# fix bz878 compilation, bug #87505
-	sed -i -e "s:lircd.conf.pixelview_bt878:lircd.conf.playtv_bt878:" configure configure.in
+	eautoreconf || "autoreconf failed"
 }
 
+
 src_compile() {
+	get_version
+
 	# set default configure options
 	[ "x${LIRC_OPTS}" = x ] && [ "${PROFILE_ARCH}" == "xbox" ] && \
 		LIRC_OPTS="--with-driver=xboxusb"
-	[ "x${LIRC_OPTS}" = x ] && LIRC_OPTS="--with-driver=serial \
-		--with-port=0x3f8 --with-irq=4"
+	[ "x${LIRC_OPTS}" = x ] && LIRC_OPTS="--with-driver=none"
 
 	# remove parallel driver on SMP systems
 	if linux_chkconfig_present SMP ; then
-		sed -i -e "s:lirc_parallel::" drivers/Makefile
+		sed -i -e "s:lirc_parallel::" drivers/Makefile.in
 	fi
 
-	# Patch bad configure for /usr/src/linux
-	libtoolize --copy --force || die "libtoolize failed"
-	sed -si "s|/usr/src/kernel\-source\-\`uname \-r\` /usr/src/linux\-\`uname \-r\` ||" \
-		acinclude.m4 aclocal.m4 configure || die "/usr/src/linux sed failed"
-
-	get_version
-	sed -si "s|\`uname \-r\`|${KV_FULL}|" configure configure.in setup.sh || \
-		die "/lib/modules sed failed"
-
 	unset ARCH
 	export WANT_AUTOCONF=2.5
 
 	econf \
-		--disable-manage-devices \
 		--localstatedir=/var \
 		--with-syslog=LOG_DAEMON \
 		--enable-sandboxed \
+		--with-kerneldir=${ROOT}/usr/src/${KV_FULL} \
+		--with-moduledir=${ROOT}/lib/modules/${KV_FULL}/misc \
 		`use_enable debug` \
 		`use_with X` \
 		${LIRC_OPTS} || die "./configure failed"
 
-	convert_to_m ${S}/Makefile
-	emake || die
+	emake || die "compile failed"
 
 }
 
 src_install() {
-	make DESTDIR=${D} install || die
+	make DESTDIR=${D} install || die "make install failed"
 
-	exeinto /etc/init.d
-	doexe ${FILESDIR}/lircd
-	doexe ${FILESDIR}/lircmd
-
-	insinto /etc/conf.d
-	newins ${FILESDIR}/lircd.conf lircd
+	newinitd ${FILESDIR}/lircd lircd
+	newinitd ${FILESDIR}/lircmd lircmd
+	newconfd ${FILESDIR}/lircd.conf lircd
 
 	has_version sys-fs/udev && (
 		insinto /etc/udev/rules.d/;
@@ -135,19 +142,13 @@
 }
 
 pkg_preinst() {
-	cp ${ROOT}/etc/lircd.conf ${IMAGE}/etc
+	[ -f "${ROOT}/etc/lircd.conf" ] && cp ${ROOT}/etc/lircd.conf ${IMAGE}/etc
 }
 
 pkg_postinst() {
-	einfo
+	linux-mod_pkg_postinst
+	echo
 	einfo "The lirc Linux Infrared Remote Control Package has been"
-	einfo "merged, please read the documentation, and if necessary"
-	einfo "add what is needed to /etc/modules.autoload or"
-	einfo "/etc/modules.d.  If you need special compile options"
-	einfo "then read the comments at the begin of this"
-	einfo "ebuild (source) and set the LIRC_OPTS environment"
-	einfo "variable to your needs."
-	einfo
-
-	update_depmod
+	einfo "merged, please read the documentation at http://www.lirc.org"
+	echo
 }