freecad --run-test 0 --write-log

FreeCAD.log (text/plain), 12.63 KB, created by jang0 on 2021-06-27 21:09:56 UTC

Msg: FreeCAD 0.19, Libs: 0.19RUnknown
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = Sun Jun 27 15:40:38 2021
Log: AppDataSkipVendor = true
Log: AppHomePath = /usr/lib64/freecad/
Log: AppIcon = freecad
Log: AppTempPath = /tmp/
Log: BinPath = /usr/lib64/freecad/bin/
Log: BuildRepositoryURL = Unknown
Log: BuildRevision = Unknown
Log: BuildRevisionDate = Unknown
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 19
Log: CSF_GraphicShr = /usr/lib64/opencascade-7.4.0/ros/lib64/libTKOpenGl.so
Log: CSF_IGESDefaults = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/XSTEPResource
Log: CSF_MDTVTexturesDirectory = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/Textures
Log: CSF_PluginDefaults = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/StdResource
Log: CSF_SHMessage = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/SHMessage
Log: CSF_STEPDefaults = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/XSTEPResource
Log: CSF_StandardDefaults = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/StdResource
Log: CSF_UnitsDefinition = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/UnitsAPI/Units.dat
Log: CSF_XCAFDefaults = /usr/lib64/opencascade-7.4.0/ros/share/opencascade/resources/StdResource
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = /usr/lib64/freecad/doc/
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.19
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = /home/jango/.FreeCAD/FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib64/opencascade-7.4.0/ros/bin:/usr/lib/llvm/12/bin:/usr/lib/llvm/11/bin
Log: PYTHONPATH = 
Log: PythonSearchPath = /usr/bin/../lib/python39.zip:/usr/bin/../lib/python3.9:/usr/bin/../lib/python3.9/lib-dynload
Log: RunMode = Internal
Log: ScriptFileName = FreeCADTest
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = /home/jango/.FreeCAD/system.cfg
Log: TestCase = TestApp.All
Log: UserAppData = /home/jango/.FreeCAD/
Log: UserHomePath = /home/jango
Log: UserParameter = /home/jango/.FreeCAD/user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing /usr/lib64/freecad/Mod/Material... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/TechDraw... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Test... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Points... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Show(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Path... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Draft... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Inspection... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Robot... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Web... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Tux(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Raytracing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Part... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/MeshPart... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing /usr/lib64/freecad/Mod/Drawing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Start... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Import... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/AddonManager... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Sketcher... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/PartDesign... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Idf... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Surface... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Fem... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Measure... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Mesh... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Arch... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Image... done
Log: Using /usr/lib64/freecad/Mod as module path!
Log: System path after init:
Log:    /usr/lib64/freecad/bin
Log:    /usr/lib64/freecad/Mod/Material
Log:    /usr/lib64/freecad/Mod/TechDraw
Log:    /usr/lib64/freecad/Mod/Test
Log:    /usr/lib64/freecad/Mod/Points
Log:    /usr/lib64/freecad/Mod/Show
Log:    /usr/lib64/freecad/Mod/Path
Log:    /usr/lib64/freecad/Mod/Draft
Log:    /usr/lib64/freecad/Mod/Inspection
Log:    /usr/lib64/freecad/Mod/Robot
Log:    /usr/lib64/freecad/Mod/Web
Log:    /usr/lib64/freecad/Mod/Tux
Log:    /usr/lib64/freecad/Mod/Raytracing
Log:    /usr/lib64/freecad/Mod/Part
Log:    /usr/lib64/freecad/Mod/MeshPart
Log:    /usr/lib64/freecad/Mod/Drawing
Log:    /usr/lib64/freecad/Mod/Start
Log:    /usr/lib64/freecad/Mod/Import
Log:    /usr/lib64/freecad/Mod/AddonManager
Log:    /usr/lib64/freecad/Mod/Sketcher
Log:    /usr/lib64/freecad/Mod/PartDesign
Log:    /usr/lib64/freecad/Mod/Idf
Log:    /usr/lib64/freecad/Mod/Surface
Log:    /usr/lib64/freecad/Mod/Fem
Log:    /usr/lib64/freecad/Mod/OpenSCAD
Log:    /usr/lib64/freecad/Mod/Measure
Log:    /usr/lib64/freecad/Mod/Mesh
Log:    /usr/lib64/freecad/Mod/Arch
Log:    /usr/lib64/freecad/Mod/Spreadsheet
Log:    /usr/lib64/freecad/Mod/Image
Log:    /usr/local/sbin
Log:    /usr/local/bin
Log:    /usr/sbin
Log:    /usr/bin
Log:    /sbin
Log:    /bin
Log:    /opt/bin
Log:    /usr/lib64/opencascade-7.4.0/ros/bin
Log:    /usr/lib/llvm/12/bin
Log:    /usr/lib/llvm/11/bin
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: QOpenGLFramebufferObject: Framebuffer incomplete attachment.
Log: QOpenGLFramebufferObject: Framebuffer incomplete attachment.
Log: QOpenGLFramebufferObject: Framebuffer incomplete attachment.
Log: QOpenGLFramebufferObject: Framebuffer incomplete attachment.
Log: QOpenGLFramebufferObject: Framebuffer incomplete, missing attachment.
Log: OpenGL version is: 3.0 (3.0 Mesa 21.0.3)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing /usr/lib64/freecad/Mod/Material... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/TechDraw... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Test... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Points... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Show(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Path... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Draft... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Inspection... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Robot... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Web... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Tux... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Raytracing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Part... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/MeshPart... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Drawing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Start... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Import... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/AddonManager... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Sketcher... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/PartDesign... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Idf(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Surface... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Fem... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Measure(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Mesh... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Arch... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Image... done
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse.
Log: Init: Entering event loop
Log: FreeCAD test running...

Log: Module: Part
Log: Loading Part module... done
Log: Loading Inspection module... done
Log: Loading TechDraw module... done
Log: Loading Path module... done
Log: Loading Sketcher module... done
Log: Loading PathStock... done
Log: Loading GUI of Part module... done
Log: Loading GUI of Path module... done
Log: Loading PathToolControllerGui... done
Log: Loading PathToolController... done
Log: PathDressupHoldingTags.NOTICE: Loading Path_DressupTag... done

Log: Loading DressupDogbone... done
Log: QVTKWidgetPlugin instantiated

Log: QVTKWidgetPlugin::name

Msg: import TestFemImport 
Msg: import TestObjectExistance 
Msg: import TestFemCommon 
Msg: import TestObjectCreate 
Msg: import TestObjectType 
Msg: import TestObjectOpen 
Msg: import TestMaterialUnits 
Log: Loading Fem module... done
Msg: import TestMeshCommon 
Msg: import TestMeshEleTetra10 
Msg: import TestMeshGroups 
Msg: import TestResult 
Log: Loading GUI of Fem module... done
Msg: import TestCcxTools 
Msg: import TestSolverCalculix 
Msg: import TestSolverElmer 
Msg: import TestSolverZ88 
Log: Loading Mesh module... done
Log: Loading GUI of Sketcher module... done
Log: Loading PartDesign module... done
Log: Loading GUI of PartDesign module... done
Msg: import TestObjectOpen 
Log: Wayland does not support QWindow::requestActivate()
Log: Wayland does not support QWindow::requestActivate()
Log: Loading TechDrawGui module... done
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: Wayland does not support QWindow::requestActivate()
Log: template destroyedLog: Wayland does not support QWindow::requestActivate()
Log: Wayland does not support QWindow::requestActivate()
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!
Log: INFO - ViewProviderPage::getMDIViewPage has no m_mdiView!