build log for 5.2.4-r3

lua-5.2.4-r3.log (text/x-log), 49.88 KB, created by orbea on 2021-01-17 03:24:25 UTC

[32;01m * [39;49;00mPackage:    dev-lang/lua-5.2.4-r3
[32;01m * [39;49;00mRepository: gentoo
[32;01m * [39;49;00mMaintainer: [e-mail] [e-mail]
[32;01m * [39;49;00mUSE:        abi_x86_64 amd64 deprecated elibc_glibc kernel_linux readline userland_GNU
[32;01m * [39;49;00mFEATURES:   ccache network-sandbox preserve-libs sandbox userpriv usersandbox
[32;01m * [39;49;00mPackage:    dev-lang/lua-5.2.4-r3
[32;01m * [39;49;00mRepository: gentoo
[32;01m * [39;49;00mMaintainer: [e-mail] [e-mail]
[32;01m * [39;49;00mUSE:        abi_x86_64 amd64 deprecated elibc_glibc kernel_linux readline userland_GNU
[32;01m * [39;49;00mFEATURES:   ccache network-sandbox preserve-libs sandbox userpriv usersandbox
>>> Unpacking source...
>>> Unpacking lua-5.2.4.tar.gz to /var/tmp/portage/dev-lang/lua-5.2.4-r3/work
>>> Source unpacked in /var/tmp/portage/dev-lang/lua-5.2.4-r3/work
>>> Preparing source in /var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4 ...
 [32;01m*[0m Applying lua-5.2.4-make.patch ...
patching file Makefile
Hunk #1 succeeded at 12 with fuzz 1 (offset 1 line).
Hunk #2 succeeded at 112 with fuzz 1 (offset -15 lines).
patching file src/Makefile
Hunk #3 succeeded at 62 (offset 8 lines).
Hunk #4 succeeded at 65 (offset 8 lines).
[A[74C [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Running eautoreconf in '/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4' ...
 [32;01m*[0m Running libtoolize --install --copy --force ...
[A[74C [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Running aclocal ...
[A[74C [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Running autoconf --force ...
[A[74C [34;01m[ [32;01mok[34;01m ][0m
 * Running elibtoolize in: lua-5.2.4/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
 [32;01m*[0m Will copy sources from /var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4
 [32;01m*[0m abi_x86_64.amd64: copying to /var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4 ...
 [32;01m*[0m abi_x86_64.amd64: running multilib-minimal_abi_src_configure
 * econf: updating lua-5.2.4/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating lua-5.2.4/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating lua-5.2.4-abi_x86_64.amd64/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating lua-5.2.4-abi_x86_64.amd64/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --docdir=/usr/share/doc/lua-5.2.4-r3 --htmldir=/usr/share/doc/lua-5.2.4-r3/html --with-sysroot=/ --libdir=/usr/lib64
configure: loading site script /usr/share/config.site
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... print -r
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... print -r --
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking for gawk... gawk
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking for sysroot... /
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating ./config.status
config.status: executing libtool commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4 ...
 [32;01m*[0m abi_x86_64.amd64: running multilib-minimal_abi_src_compile
make -j4 CC=x86_64-pc-linux-gnu-gcc 'CFLAGS=-DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe' 'SYSLDFLAGS=-Wl,-O1 -Wl,--as-needed' RPATH=/usr/lib64/ LUA_LIBS=-lreadline 'LIB_LIBS=-lm -ldl' V=5.2 gentoo_all 
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lapi.lo lapi.c
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lcode.lo lcode.c
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lctype.lo lctype.c
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldebug.lo ldebug.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lcode.lo lcode.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lapi.lo lapi.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.



rdlibtoolrdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 --mode=compile x86_64-pc-linux-gnu-gcc {.st_dev = 65026, .st_ino = 100664526}.
 -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lctype.lo lctype.c

rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lcode.c -DPICrdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
 -fPIC -o .libs/lcode.o
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -crdlibtool: compile: -DLUA_COMPAT_ALL x86_64-pc-linux-gnu-gcc -DLUA_USE_LINUX -c -O2 -DLUA_COMPAT_ALL -pipe -DLUA_USE_LINUX lctype.c -O2 -DPIC -pipe -fPIC lapi.c -o -DPIC .libs/lctype.o -fPIC
 -o .libs/lapi.o



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldebug.lo ldebug.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldebug.c -DPIC -fPIC -o .libs/ldebug.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lctype.c -o lctype.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldo.lo ldo.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldo.lo ldo.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldo.c -DPIC -fPIC -o .libs/ldo.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldebug.c -o ldebug.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lcode.c -o lcode.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldo.c -o ldo.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lapi.c -o lapi.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldump.lo ldump.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldump.lo ldump.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldump.c -DPIC -fPIC -o .libs/ldump.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldump.c -o ldump.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lfunc.lo lfunc.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lfunc.lo lfunc.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lfunc.c -DPIC -fPIC -o .libs/lfunc.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lgc.lo lgc.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lgc.lo lgc.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lgc.c -DPIC -fPIC -o .libs/lgc.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o llex.lo llex.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o llex.lo llex.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe llex.c -DPIC -fPIC -o .libs/llex.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lfunc.c -o lfunc.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lmem.lo lmem.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lmem.lo lmem.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lmem.c -DPIC -fPIC -o .libs/lmem.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lobject.lo lobject.c
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lmem.c -o lmem.o



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lobject.lo lobject.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lobject.c -DPIC -fPIC -o .libs/lobject.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe llex.c -o llex.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lopcodes.lo lopcodes.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lopcodes.lo lopcodes.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lopcodes.c -DPIC -fPIC -o .libs/lopcodes.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lopcodes.c -o lopcodes.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lobject.c -o lobject.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lgc.c -o lgc.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lparser.lo lparser.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lparser.lo lparser.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lparser.c -DPIC -fPIC -o .libs/lparser.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstate.lo lstate.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstate.lo lstate.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstate.c -DPIC -fPIC -o .libs/lstate.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstring.lo lstring.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstring.lo lstring.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstring.c -DPIC -fPIC -o .libs/lstring.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstate.c -o lstate.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstring.c -o lstring.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltable.lo ltable.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltable.lo ltable.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltable.c -DPIC -fPIC -o .libs/ltable.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltm.lo ltm.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltm.lo ltm.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltm.c -DPIC -fPIC -o .libs/ltm.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lundump.lo lundump.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lundump.lo lundump.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lundump.c -DPIC -fPIC -o .libs/lundump.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltm.c -o ltm.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lparser.c -o lparser.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lvm.lo lvm.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lvm.lo lvm.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lvm.c -DPIC -fPIC -o .libs/lvm.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lundump.c -o lundump.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltable.c -o ltable.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lzio.lo lzio.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lzio.lo lzio.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lzio.c -DPIC -fPIC -o .libs/lzio.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lzio.c -o lzio.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lauxlib.lo lauxlib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lauxlib.lo lauxlib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lauxlib.c -DPIC -fPIC -o .libs/lauxlib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lbaselib.lo lbaselib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lbaselib.lo lbaselib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lbaselib.c -DPIC -fPIC -o .libs/lbaselib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lbitlib.lo lbitlib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lbitlib.lo lbitlib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lbitlib.c -DPIC -fPIC -o .libs/lbitlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lvm.c -o lvm.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lbitlib.c -o lbitlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lbaselib.c -o lbaselib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lcorolib.lo lcorolib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lcorolib.lo lcorolib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lcorolib.c -DPIC -fPIC -o .libs/lcorolib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lauxlib.c -o lauxlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lcorolib.c -o lcorolib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldblib.lo ldblib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ldblib.lo ldblib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldblib.c -DPIC -fPIC -o .libs/ldblib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o liolib.lo liolib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o liolib.lo liolib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe liolib.c -DPIC -fPIC -o .libs/liolib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ldblib.c -o ldblib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lmathlib.lo lmathlib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lmathlib.lo lmathlib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lmathlib.c -DPIC -fPIC -o .libs/lmathlib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o loslib.lo loslib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o loslib.lo loslib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe loslib.c -DPIC -fPIC -o .libs/loslib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe liolib.c -o liolib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstrlib.lo lstrlib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lstrlib.lo lstrlib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstrlib.c -DPIC -fPIC -o .libs/lstrlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lmathlib.c -o lmathlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe loslib.c -o loslib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltablib.lo ltablib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o ltablib.lo ltablib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltablib.c -DPIC -fPIC -o .libs/ltablib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o loadlib.lo loadlib.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o loadlib.lo loadlib.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe loadlib.c -DPIC -fPIC -o .libs/loadlib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o linit.lo linit.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o linit.lo linit.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe linit.c -DPIC -fPIC -o .libs/linit.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe linit.c -o linit.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe ltablib.c -o ltablib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lua.lo lua.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o lua.lo lua.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lua.c -DPIC -fPIC -o .libs/lua.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe loadlib.c -o loadlib.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lstrlib.c -o lstrlib.o
rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c  -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o luac.lo luac.c



rdlibtool --mode=compile x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe -o luac.lo luac.c

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe luac.c -DPIC -fPIC -o .libs/luac.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe lua.c -o lua.o
rdlibtool: compile: x86_64-pc-linux-gnu-gcc -c -DLUA_COMPAT_ALL -DLUA_USE_LINUX -O2 -pipe luac.c -o luac.o
rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -version-info 0:0:0 \
            -rpath /usr/lib64/ -Wl,-O1 -Wl,--as-needed  -o liblua5.2.la lapi.lo lcode.lo lctype.lo ldebug.lo ldo.lo ldump.lo lfunc.lo lgc.lo llex.lo lmem.lo lobject.lo lopcodes.lo lparser.lo lstate.lo lstring.lo ltable.lo ltm.lo lundump.lo lvm.lo lzio.lo lauxlib.lo lbaselib.lo lbitlib.lo lcorolib.lo ldblib.lo liolib.lo lmathlib.lo loslib.lo lstrlib.lo ltablib.lo loadlib.lo linit.lo -lm -ldl



rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -version-info 0:0:0 -rpath /usr/lib64/ -Wl,-O1 -Wl,--as-needed -o liblua5.2.la lapi.lo lcode.lo lctype.lo ldebug.lo ldo.lo ldump.lo lfunc.lo lgc.lo llex.lo lmem.lo lobject.lo lopcodes.lo lparser.lo lstate.lo lstring.lo ltable.lo ltm.lo lundump.lo lvm.lo lzio.lo lauxlib.lo lbaselib.lo lbitlib.lo lcorolib.lo ldblib.lo liolib.lo lmathlib.lo loslib.lo lstrlib.lo ltablib.lo loadlib.lo linit.lo -lm -ldl

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: link: ar crs .libs/liblua5.2.a .libs/lapi.o .libs/lcode.o .libs/lctype.o .libs/ldebug.o .libs/ldo.o .libs/ldump.o .libs/lfunc.o .libs/lgc.o .libs/llex.o .libs/lmem.o .libs/lobject.o .libs/lopcodes.o .libs/lparser.o .libs/lstate.o .libs/lstring.o .libs/ltable.o .libs/ltm.o .libs/lundump.o .libs/lvm.o .libs/lzio.o .libs/lauxlib.o .libs/lbaselib.o .libs/lbitlib.o .libs/lcorolib.o .libs/ldblib.o .libs/liolib.o .libs/lmathlib.o .libs/loslib.o .libs/lstrlib.o .libs/ltablib.o .libs/loadlib.o .libs/linit.o
rdlibtool: link: x86_64-pc-linux-gnu-gcc .libs/lapi.o .libs/lcode.o .libs/lctype.o .libs/ldebug.o .libs/ldo.o .libs/ldump.o .libs/lfunc.o .libs/lgc.o .libs/llex.o .libs/lmem.o .libs/lobject.o .libs/lopcodes.o .libs/lparser.o .libs/lstate.o .libs/lstring.o .libs/ltable.o .libs/ltm.o .libs/lundump.o .libs/lvm.o .libs/lzio.o .libs/lauxlib.o .libs/lbaselib.o .libs/lbitlib.o .libs/lcorolib.o .libs/ldblib.o .libs/liolib.o .libs/lmathlib.o .libs/loslib.o .libs/lstrlib.o .libs/ltablib.o .libs/loadlib.o .libs/linit.o -Wl,-O1 -Wl,--as-needed -lm -ldl -shared -fPIC -Wl,-soname -Wl,liblua5.2.so.0 -o .libs/liblua5.2.so.0.0.0
rdlibtool: link: ln -s liblua5.2.so.0.0.0 .libs/liblua5.2.so.0
rdlibtool: link: ln -s liblua5.2.so.0.0.0 .libs/liblua5.2.so
rdlibtool: link: ln -s ../liblua5.2.la .libs/liblua5.2.la
rdlibtool: link: ln -s ../liblua5.2.la .libs/liblua5.2.lai
rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -static -export-dynamic -Wl,-O1 -Wl,--as-needed  -o lua5.2 lua.lo liblua5.2.la -lreadline



rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -static -export-dynamic -Wl,-O1 -Wl,--as-needed -o lua5.2 lua.lo liblua5.2.la -lreadline

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: link: x86_64-pc-linux-gnu-gcc .libs/lua.o -Wl,-O1 -Wl,--as-needed -Wl,-rpath -Wl,/usr/lib64/ -L.libs -llua5.2 -lm -ldl -lreadline -o .libs/lua5.2 -Wl,--export-dynamic
rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -static -Wl,-O1 -Wl,--as-needed  -o luac5.2 luac.lo liblua5.2.la
rdlibtool: link: ln -s lua5.2 lua5.2.exe.wrapper



rdlibtool --mode=link x86_64-pc-linux-gnu-gcc -static -Wl,-O1 -Wl,--as-needed -o luac5.2 luac.lo liblua5.2.la

rdlibtool: lconf: {.name="libtool"}.
rdlibtool: fdcwd: {.fdcwd=AT_FDCWD, .realpath="/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src"}.
rdlibtool: lconf: fstatat(AT_FDCWD,".",...) = 0 {.st_dev = 65026, .st_ino = 100664526}.
rdlibtool: lconf: openat(AT_FDCWD,"libtool",O_RDONLY,0) = -1 [ENOENT].
rdlibtool: lconf: openat(AT_FDCWD,"../",O_DIRECTORY,0) = 3.
rdlibtool: lconf: fstat(3,...) = 0 {.st_dev = 65026, .st_ino = 33556376}.
rdlibtool: lconf: openat(3,"libtool",O_RDONLY,0) = 4.
rdlibtool: lconf: found "/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/libtool".
rdlibtool: link: x86_64-pc-linux-gnu-gcc .libs/luac.o -Wl,-O1 -Wl,--as-needed -Wl,-rpath -Wl,/usr/lib64/ -L.libs -llua5.2 -lm -ldl -o .libs/luac5.2
/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: .libs/luac.o: in function `PrintFunction':
luac.c:(.text+0x5cb): undefined reference to `luaP_opnames'
/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: luac.c:(.text+0x5e9): undefined reference to `luaP_opmodes'
/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: .libs/luac.o: in function `pmain':
luac.c:(.text+0xe1a): undefined reference to `luaU_dump'
/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: .libs/luac5.2: hidden symbol `luaP_opmodes' isn't defined
/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
rdlibtool: exec error upon slbt_exec_link_create_executable(), line 1614: (see child process error messages).
rdlibtool: < returned to > slbt_exec_link(), line 1909.
make: *** [Makefile:209: luac5.2] Error 2
 [31;01m*[0m ERROR: dev-lang/lua-5.2.4-r3::gentoo failed (compile phase):
 [31;01m*[0m   emake failed
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of `emerge --info '=dev-lang/lua-5.2.4-r3::gentoo'`,
 [31;01m*[0m the complete build log and the output of `emerge -pqv '=dev-lang/lua-5.2.4-r3::gentoo'`.
 [31;01m*[0m The complete build log is located at '/var/tmp/portage/dev-lang/lua-5.2.4-r3/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/dev-lang/lua-5.2.4-r3/temp/environment'.
 [31;01m*[0m Working directory: '/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4-abi_x86_64.amd64/src'
 [31;01m*[0m S: '/var/tmp/portage/dev-lang/lua-5.2.4-r3/work/lua-5.2.4'