This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by hal configure 0.4.8, which was generated by GNU Autoconf 2.59. Invocation command line was $ ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --build=i686-pc-linux-gnu --disable-verbose-mode --disable-pcmcia-support --enable-sysfs-carrier --enable-fstab-sync --enable-hotplug-map --disable-docbook-docs --disable-doxygen-docs --with-pid-file=/var/run/hald/hald.pid ## --------- ## ## Platform. ## ## --------- ## hostname = eNTi uname -m = x86_64 uname -r = 2.6.12-gentoo-r7 uname -s = Linux uname -v = #7 SMP Thu Aug 4 02:40:14 CEST 2005 /usr/bin/uname -p = AMD Athlon(tm) 64 Processor 3500+ /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /sbin PATH: /usr/sbin PATH: /usr/lib/portage/bin PATH: /bin PATH: /usr/bin PATH: /opt/bin PATH: /usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 PATH: /opt/blackdown-jdk-1.4.2.02/bin PATH: /opt/blackdown-jdk-1.4.2.02/jre/bin PATH: /usr/qt/3/bin PATH: /usr/kde/3.4/sbin PATH: /usr/kde/3.4/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:1571: checking for a BSD-compatible install configure:1626: result: /bin/install -c configure:1637: checking whether build environment is sane configure:1680: result: yes configure:1745: checking for gawk configure:1761: found /bin/gawk configure:1771: result: gawk configure:1781: checking whether make sets $(MAKE) configure:1801: result: yes configure:1971: checking whether to enable maintainer-specific portions of Makefiles configure:1980: result: no configure:2008: checking for style of include used by make configure:2036: result: GNU configure:2069: checking for i686-pc-linux-gnu-gcc configure:2098: result: no configure:2107: checking for gcc configure:2123: found /usr/bin/gcc configure:2133: result: gcc configure:2377: checking for C compiler version configure:2380: gcc --version &5 gcc (GCC) 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:2383: $? = 0 configure:2385: gcc -v &5 Reading specs from /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/specs Configured with: /var/tmp/portage/gcc-3.4.4/work/gcc-3.4.4/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include/g++-v3 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --enable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu Thread model: posix gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) configure:2388: $? = 0 configure:2390: gcc -V &5 gcc: `-V' must come at the start of the command line configure:2393: $? = 1 configure:2416: checking for C compiler default output file name configure:2419: gcc -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:2422: $? = 0 configure:2468: result: a.out configure:2473: checking whether the C compiler works configure:2479: ./a.out configure:2482: $? = 0 configure:2499: result: yes configure:2506: checking whether we are cross compiling configure:2508: result: no configure:2511: checking for suffix of executables configure:2513: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:2516: $? = 0 configure:2541: result: configure:2547: checking for suffix of object files configure:2568: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:2571: $? = 0 configure:2593: result: o configure:2597: checking whether we are using the GNU C compiler configure:2621: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:2627: $? = 0 configure:2631: test -z || test ! -s conftest.err configure:2634: $? = 0 configure:2637: test -s conftest.o configure:2640: $? = 0 configure:2653: result: yes configure:2659: checking whether gcc accepts -g configure:2680: gcc -c -g conftest.c >&5 configure:2686: $? = 0 configure:2690: test -z || test ! -s conftest.err configure:2693: $? = 0 configure:2696: test -s conftest.o configure:2699: $? = 0 configure:2710: result: yes configure:2727: checking for gcc option to accept ANSI C configure:2797: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:2803: $? = 0 configure:2807: test -z || test ! -s conftest.err configure:2810: $? = 0 configure:2813: test -s conftest.o configure:2816: $? = 0 configure:2834: result: none needed configure:2852: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 conftest.c:2: error: parse error before "me" configure:2858: $? = 1 configure: failed program was: | #ifndef __cplusplus | choke me | #endif configure:2993: checking dependency style of gcc configure:3083: result: gcc3 configure:3101: checking for library containing strerror configure:3131: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:3137: $? = 0 configure:3141: test -z || test ! -s conftest.err configure:3144: $? = 0 configure:3147: test -s conftest configure:3150: $? = 0 configure:3220: result: none required configure:3235: checking for i686-pc-linux-gnu-gcc configure:3261: result: gcc configure:3543: checking for C compiler version configure:3546: gcc --version &5 gcc (GCC) 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3549: $? = 0 configure:3551: gcc -v &5 Reading specs from /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/specs Configured with: /var/tmp/portage/gcc-3.4.4/work/gcc-3.4.4/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include/g++-v3 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --enable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu Thread model: posix gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) configure:3554: $? = 0 configure:3556: gcc -V &5 gcc: `-V' must come at the start of the command line configure:3559: $? = 1 configure:3562: checking whether we are using the GNU C compiler configure:3618: result: yes configure:3624: checking whether gcc accepts -g configure:3675: result: yes configure:3692: checking for gcc option to accept ANSI C configure:3799: result: none needed configure:3817: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 conftest.c:2: error: parse error before "me" configure:3823: $? = 1 configure: failed program was: | #ifndef __cplusplus | choke me | #endif configure:3958: checking dependency style of gcc configure:4048: result: gcc3 configure:4073: checking for i686-pc-linux-gnu-gcc configure:4099: result: gcc configure:4381: checking for C compiler version configure:4384: gcc --version &5 gcc (GCC) 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4387: $? = 0 configure:4389: gcc -v &5 Reading specs from /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/specs Configured with: /var/tmp/portage/gcc-3.4.4/work/gcc-3.4.4/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include/g++-v3 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --enable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu Thread model: posix gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) configure:4392: $? = 0 configure:4394: gcc -V &5 gcc: `-V' must come at the start of the command line configure:4397: $? = 1 configure:4400: checking whether we are using the GNU C compiler configure:4456: result: yes configure:4462: checking whether gcc accepts -g configure:4513: result: yes configure:4530: checking for gcc option to accept ANSI C configure:4637: result: none needed configure:4655: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 conftest.c:2: error: parse error before "me" configure:4661: $? = 1 configure: failed program was: | #ifndef __cplusplus | choke me | #endif configure:4796: checking dependency style of gcc configure:4886: result: gcc3 configure:4911: checking how to run the C preprocessor configure:4946: gcc -E conftest.c configure:4952: $? = 0 configure:4984: gcc -E conftest.c conftest.c:11:28: ac_nonexistent.h: No such file or directory configure:4990: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | /* end confdefs.h. */ | #include configure:5029: result: gcc -E configure:5053: gcc -E conftest.c configure:5059: $? = 0 configure:5091: gcc -E conftest.c conftest.c:11:28: ac_nonexistent.h: No such file or directory configure:5097: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | /* end confdefs.h. */ | #include configure:5141: checking for egrep configure:5151: result: grep -E configure:5156: checking for ANSI C header files configure:5181: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:5187: $? = 0 configure:5191: test -z || test ! -s conftest.err configure:5194: $? = 0 configure:5197: test -s conftest.o configure:5200: $? = 0 configure:5289: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:5292: $? = 0 configure:5294: ./conftest configure:5297: $? = 0 configure:5312: result: yes configure:5400: checking build system type configure:5418: result: i686-pc-linux-gnu configure:5426: checking host system type configure:5440: result: i686-pc-linux-gnu configure:5448: checking for a sed that does not truncate output configure:5502: result: /bin/sed configure:5516: checking for ld used by gcc configure:5583: result: /usr/x86_64-pc-linux-gnu/bin/ld configure:5592: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld configure:5607: result: yes configure:5612: checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files configure:5619: result: -r configure:5628: checking for BSD-compatible nm configure:5670: result: nm configure:5674: checking whether ln -s works configure:5678: result: yes configure:5685: checking how to recognise dependent libraries configure:5868: result: pass_all configure:6090: checking for sys/types.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for sys/stat.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for stdlib.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for string.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for memory.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for strings.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for inttypes.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for stdint.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6090: checking for unistd.h configure:6106: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6112: $? = 0 configure:6116: test -z || test ! -s conftest.err configure:6119: $? = 0 configure:6122: test -s conftest.o configure:6125: $? = 0 configure:6136: result: yes configure:6162: checking dlfcn.h usability configure:6174: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:6180: $? = 0 configure:6184: test -z || test ! -s conftest.err configure:6187: $? = 0 configure:6190: test -s conftest.o configure:6193: $? = 0 configure:6203: result: yes configure:6207: checking dlfcn.h presence configure:6217: gcc -E conftest.c configure:6223: $? = 0 configure:6243: result: yes configure:6278: checking for dlfcn.h configure:6285: result: yes configure:6308: checking for i686-pc-linux-gnu-g++ configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-c++ configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-gpp configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-aCC configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-CC configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-cxx configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-cc++ configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-cl configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-FCC configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-KCC configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-RCC configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-xlC_r configure:6337: result: no configure:6308: checking for i686-pc-linux-gnu-xlC configure:6337: result: no configure:6350: checking for g++ configure:6366: found /usr/bin/g++ configure:6376: result: g++ configure:6392: checking for C++ compiler version configure:6395: g++ --version &5 g++ (GCC) 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:6398: $? = 0 configure:6400: g++ -v &5 Reading specs from /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/specs Configured with: /var/tmp/portage/gcc-3.4.4/work/gcc-3.4.4/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include/g++-v3 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --enable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu Thread model: posix gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) configure:6403: $? = 0 configure:6405: g++ -V &5 g++: argument to `-V' missing configure:6408: $? = 1 configure:6411: checking whether we are using the GNU C++ compiler configure:6435: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 configure:6441: $? = 0 configure:6445: test -z || test ! -s conftest.err configure:6448: $? = 0 configure:6451: test -s conftest.o configure:6454: $? = 0 configure:6467: result: yes configure:6473: checking whether g++ accepts -g configure:6494: g++ -c -g conftest.cc >&5 configure:6500: $? = 0 configure:6504: test -z || test ! -s conftest.err configure:6507: $? = 0 configure:6510: test -s conftest.o configure:6513: $? = 0 configure:6524: result: yes configure:6566: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 configure:6572: $? = 0 configure:6576: test -z || test ! -s conftest.err configure:6579: $? = 0 configure:6582: test -s conftest.o configure:6585: $? = 0 configure:6611: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 conftest.cc: In function `int main()': conftest.cc:26: error: `exit' undeclared (first use this function) conftest.cc:26: error: (Each undeclared identifier is reported only once for each function it appears in.) configure:6617: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | /* end confdefs.h. */ | | int | main () | { | exit (42); | ; | return 0; | } configure:6566: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 configure:6572: $? = 0 configure:6576: test -z || test ! -s conftest.err configure:6579: $? = 0 configure:6582: test -s conftest.o configure:6585: $? = 0 configure:6611: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 configure:6617: $? = 0 configure:6621: test -z || test ! -s conftest.err configure:6624: $? = 0 configure:6627: test -s conftest.o configure:6630: $? = 0 configure:6655: checking dependency style of g++ configure:6745: result: gcc3 configure:6767: checking how to run the C++ preprocessor configure:6798: g++ -E conftest.cc configure:6804: $? = 0 configure:6836: g++ -E conftest.cc conftest.cc:25:28: ac_nonexistent.h: No such file or directory configure:6842: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #ifdef __cplusplus | extern "C" void std::exit (int) throw (); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:6881: result: g++ -E configure:6905: g++ -E conftest.cc configure:6911: $? = 0 configure:6943: g++ -E conftest.cc conftest.cc:25:28: ac_nonexistent.h: No such file or directory configure:6949: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #ifdef __cplusplus | extern "C" void std::exit (int) throw (); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:7002: checking for i686-pc-linux-gnu-g77 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-f77 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-xlf configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-frt configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-pgf77 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-fort77 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-fl32 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-af77 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-f90 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-xlf90 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-pgf90 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-epcf90 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-f95 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-fort configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-xlf95 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-ifc configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-efc configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-pgf95 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-lf95 configure:7031: result: no configure:7002: checking for i686-pc-linux-gnu-gfortran configure:7031: result: no configure:7044: checking for g77 configure:7060: found /usr/bin/g77 configure:7070: result: g77 configure:7085: checking for Fortran 77 compiler version configure:7088: g77 --version &5 GNU Fortran (GCC) 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) Copyright (C) 2004 Free Software Foundation, Inc. GNU Fortran comes with NO WARRANTY, to the extent permitted by law. You may redistribute copies of GNU Fortran under the terms of the GNU General Public License. For more information about these matters, see the file named COPYING or type the command `info -f g77 Copying'. configure:7091: $? = 0 configure:7093: g77 -v &5 Reading specs from /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/specs Configured with: /var/tmp/portage/gcc-3.4.4/work/gcc-3.4.4/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/3.4.4 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/3.4.4/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include/g++-v3 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --enable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu Thread model: posix gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8) configure:7096: $? = 0 configure:7098: g77 -V &5 g77: argument to `-V' missing configure:7101: $? = 1 configure:7109: checking whether we are using the GNU Fortran 77 compiler configure:7123: g77 -c conftest.F >&5 configure:7129: $? = 0 configure:7133: test -z || test ! -s conftest.err configure:7136: $? = 0 configure:7139: test -s conftest.o configure:7142: $? = 0 configure:7155: result: yes configure:7161: checking whether g77 accepts -g configure:7173: g77 -c -g conftest.f >&5 configure:7179: $? = 0 configure:7183: test -z || test ! -s conftest.err configure:7186: $? = 0 configure:7189: test -s conftest.o configure:7192: $? = 0 configure:7204: result: yes configure:7234: checking the maximum length of command line arguments configure:7299: result: 32768 configure:7310: checking command to parse nm output from gcc object configure:7399: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:7402: $? = 0 configure:7406: nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm configure:7409: $? = 0 configure:7461: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer conftest.c conftstm.o >&5 configure:7464: $? = 0 configure:7502: result: ok configure:7506: checking for objdir configure:7521: result: .libs configure:7573: checking for i686-pc-linux-gnu-ar configure:7602: result: no configure:7611: checking for ar configure:7627: found /usr/bin/ar configure:7638: result: ar configure:7653: checking for i686-pc-linux-gnu-ranlib configure:7682: result: no configure:7691: checking for ranlib configure:7707: found /usr/bin/ranlib configure:7718: result: ranlib configure:7733: checking for i686-pc-linux-gnu-strip configure:7762: result: no configure:7771: checking for strip configure:7787: found /usr/bin/strip configure:7798: result: strip configure:8060: checking if gcc static flag works configure:8083: result: yes configure:8101: checking if gcc supports -fno-rtti -fno-exceptions configure:8119: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C configure:8123: $? = 0 configure:8134: result: no configure:8149: checking for gcc option to produce PIC configure:8326: result: -fPIC configure:8334: checking if gcc PIC flag -fPIC works configure:8352: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -fPIC -DPIC conftest.c >&5 configure:8356: $? = 0 configure:8367: result: yes configure:8391: checking if gcc supports -c -o file.o configure:8412: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -o out/conftest2.o conftest.c >&5 configure:8416: $? = 0 configure:8436: result: yes configure:8462: checking whether the gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld) supports shared libraries configure:9310: result: yes configure:9336: checking whether -lc should be explicitly linked in configure:9341: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:9344: $? = 0 configure:9358: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1 configure:9361: $? = 0 configure:9373: result: no configure:9381: checking dynamic linker characteristics configure:9942: result: GNU/Linux ld.so configure:9946: checking how to hardcode library paths into programs configure:9971: result: immediate configure:9985: checking whether stripping libraries is possible configure:9990: result: yes configure:10820: checking if libtool supports shared libraries configure:10822: result: yes configure:10825: checking whether to build shared libraries configure:10883: result: yes configure:10886: checking whether to build static libraries configure:10890: result: yes configure:10982: creating libtool configure:11529: checking for ld used by g++ configure:11596: result: /usr/x86_64-pc-linux-gnu/bin/ld configure:11605: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld configure:11620: result: yes configure:11671: checking whether the g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld) supports shared libraries configure:12499: result: yes configure:12517: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.cc >&5 configure:12520: $? = 0 configure:12616: checking for g++ option to produce PIC configure:12868: result: -fPIC configure:12876: checking if g++ PIC flag -fPIC works configure:12894: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer -fPIC -DPIC conftest.cc >&5 configure:12898: $? = 0 configure:12909: result: yes configure:12933: checking if g++ supports -c -o file.o configure:12954: g++ -c -O2 -march=k8 -msse2 -pipe -ftracer -o out/conftest2.o conftest.cc >&5 configure:12958: $? = 0 configure:12978: result: yes configure:13004: checking whether the g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld) supports shared libraries configure:13029: result: yes configure:13100: checking dynamic linker characteristics configure:13661: result: GNU/Linux ld.so configure:13665: checking how to hardcode library paths into programs configure:13690: result: immediate configure:13704: checking whether stripping libraries is possible configure:13709: result: yes configure:15016: checking if libtool supports shared libraries configure:15018: result: yes configure:15021: checking whether to build shared libraries configure:15039: result: yes configure:15042: checking whether to build static libraries configure:15046: result: yes configure:15058: checking for g77 option to produce PIC configure:15235: result: -fPIC configure:15243: checking if g77 PIC flag -fPIC works configure:15261: g77 -c -g -O2 -fPIC conftest.f >&5 configure:15265: $? = 0 configure:15276: result: yes configure:15300: checking if g77 supports -c -o file.o configure:15321: g77 -c -g -O2 -o out/conftest2.o conftest.f >&5 configure:15325: $? = 0 configure:15345: result: yes configure:15371: checking whether the g77 linker (/usr/x86_64-pc-linux-gnu/bin/ld) supports shared libraries configure:16199: result: yes configure:16270: checking dynamic linker characteristics configure:16831: result: GNU/Linux ld.so configure:16835: checking how to hardcode library paths into programs configure:16860: result: immediate configure:16874: checking whether stripping libraries is possible configure:16879: result: yes configure:20986: checking whether make sets $(MAKE) configure:21006: result: yes configure:21015: checking whether ln -s works configure:21019: result: yes configure:21037: checking for python configure:21055: found /usr/bin/python configure:21067: result: /usr/bin/python configure:21088: checking for python version configure:21095: result: 2.4 configure:21107: checking for python platform configure:21114: result: linux2 configure:21121: checking for python script directory configure:21129: result: ${prefix}/lib/python2.4/site-packages configure:21138: checking for python extension module directory configure:21146: result: ${exec_prefix}/lib64/python2.4/site-packages configure:21166: checking for special C compiler options needed for large files configure:21265: result: no configure:21271: checking for _FILE_OFFSET_BITS value needed for large files configure:21302: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:21308: $? = 0 configure:21312: test -z || test ! -s conftest.err configure:21315: $? = 0 configure:21318: test -s conftest.o configure:21321: $? = 0 configure:21386: result: no configure:21396: checking for _LARGE_FILES value needed for large files configure:21427: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:21433: $? = 0 configure:21437: test -z || test ! -s conftest.err configure:21440: $? = 0 configure:21443: test -s conftest.o configure:21446: $? = 0 configure:21511: result: no configure:21547: checking for /usr/share/hwdata/pci.ids configure:21562: result: no configure:21547: checking for /usr/share/misc/pci.ids configure:21562: result: yes configure:21547: checking for /usr/share/pci.ids configure:21562: result: no configure:21547: checking for /var/lib/misc/pci.ids configure:21562: result: no configure:21688: checking popt.h usability configure:21700: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer conftest.c >&5 configure:21706: $? = 0 configure:21710: test -z || test ! -s conftest.err configure:21713: $? = 0 configure:21716: test -s conftest.o configure:21719: $? = 0 configure:21729: result: yes configure:21733: checking popt.h presence configure:21743: gcc -E conftest.c configure:21749: $? = 0 configure:21769: result: yes configure:21804: checking for popt.h configure:21811: result: yes configure:21829: checking for poptGetContext in -lpopt configure:21859: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer conftest.c -lpopt >&5 configure:21865: $? = 0 configure:21869: test -z || test ! -s conftest.err configure:21872: $? = 0 configure:21875: test -s conftest configure:21878: $? = 0 configure:21891: result: yes configure:22118: checking sys/capability.h usability configure:22130: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare conftest.c >&5 configure:22136: $? = 0 configure:22140: test -z || test ! -s conftest.err configure:22143: $? = 0 configure:22146: test -s conftest.o configure:22149: $? = 0 configure:22159: result: yes configure:22163: checking sys/capability.h presence configure:22173: gcc -E conftest.c configure:22179: $? = 0 configure:22199: result: yes configure:22234: checking for sys/capability.h configure:22241: result: yes configure:22267: checking for pkg-config configure:22285: found /usr/bin/pkg-config configure:22298: result: /usr/bin/pkg-config configure:22315: checking for glib-2.0 >= 2.2.2, gobject-2.0 >= 2.2.2, dbus-glib-1 >= 0.20, dbus-1 >= 0.20 configure:22319: result: yes configure:22323: checking PACKAGE_CFLAGS configure:22326: result: -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include configure:22329: checking PACKAGE_LIBS configure:22332: result: -lgobject-2.0 -ldbus-glib-1 -lglib-2.0 -ldbus-1 configure:22386: checking expat.h usability configure:22398: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare conftest.c >&5 configure:22404: $? = 0 configure:22408: test -z || test ! -s conftest.err configure:22411: $? = 0 configure:22414: test -s conftest.o configure:22417: $? = 0 configure:22427: result: yes configure:22431: checking expat.h presence configure:22441: gcc -E conftest.c configure:22447: $? = 0 configure:22467: result: yes configure:22502: checking for expat.h configure:22509: result: yes configure:22522: checking for XML_ParserCreate in -lexpat configure:22552: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare conftest.c -lexpat -lpopt >&5 configure:22558: $? = 0 configure:22562: test -z || test ! -s conftest.err configure:22565: $? = 0 configure:22568: test -s conftest configure:22571: $? = 0 configure:22584: result: yes configure:22655: checking for dbus-1 >= 0.20 configure:22659: result: yes configure:22663: checking DBUS_CFLAGS configure:22666: result: -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include configure:22669: checking DBUS_LIBS configure:22672: result: -ldbus-1 configure:22709: checking for doxygen configure:22740: result: no configure:22748: checking whether to build Doxygen documentation configure:22783: result: yes configure:22787: checking for BLKGETSIZE64 configure:22814: gcc -c -O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare conftest.c >&5 conftest.c: In function `main': conftest.c:45: warning: 'main' is normally a non-static function conftest.c: In function `main': conftest.c:48: warning: implicit declaration of function `ioctl' conftest.c:48: warning: nested extern declaration of `ioctl' configure:22820: $? = 0 configure:22824: test -z || test ! -s conftest.err configure:22827: $? = 0 configure:22830: test -s conftest.o configure:22833: $? = 0 configure:22843: result: yes configure:22855: checking for docbook2html configure:22886: result: no configure:22894: checking whether to build DocBook documentation configure:22929: result: yes configure:23200: checking for selinux_removable_context_path in -lselinux configure:23230: gcc -o conftest -O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare conftest.c -lselinux -lpopt >&5 /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lselinux collect2: ld returned 1 exit status configure:23236: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "hal" | #define PACKAGE_TARNAME "hal" | #define PACKAGE_VERSION "0.4.8" | #define PACKAGE_STRING "hal 0.4.8" | #define PACKAGE_BUGREPORT "david@fubar.dk" | #define PACKAGE "hal" | #define VERSION "0.4.8" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #ifdef __cplusplus | extern "C" void std::exit (int) throw (); using std::exit; | #endif | #define HWDATA_DIR "/usr/share/misc" | #define HAL_USER "haldaemon" | #define HAL_GROUP "haldaemon" | #define HAVE_POPT_H 1 | #define HAVE_LIBPOPT 1 | #define FSTAB_SYNC_ENABLED 1 | #define PCMCIA_SUPPORT_ENABLE 1 | #define PCMCIA_STAB_FILE "/var/lib/pcmcia/stab" | #define SYSFS_CARRIER_ENABLE 1 | #define HOTPLUG_MAP_ENABLED 1 | #define HAVE_SYS_CAPABILITY_H 1 | #define HAVE_EXPAT_H 1 | #define DBUS_API_SUBJECT_TO_CHANGE | #define DBUS_SYSTEMD_DIR "/etc/dbus-1/system.d" | #define LINUX_HOTPLUG_DIR "/etc/hotplug.d" | #define HALD_PID_FILE "/var/run/hald/hald.pid" | /* end confdefs.h. */ | | /* Override any gcc2 internal prototype to avoid an error. */ | #ifdef __cplusplus | extern "C" | #endif | /* We use char because int might match the return type of a gcc2 | builtin and then its argument prototype would still apply. */ | char selinux_removable_context_path (); | int | main () | { | selinux_removable_context_path (); | ; | return 0; | } configure:23262: result: no configure:23273: WARNING: Sufficiently new SELinux library not found configure:23322: checking for intltool >= 0.22 configure:23332: result: 0.31.2 found configure:23387: checking for perl configure:23405: found /usr/bin/perl configure:23417: result: /usr/bin/perl configure:23435: checking for XML::Parser configure:23441: error: XML::Parser perl module is required for intltool ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i686-pc-linux-gnu ac_cv_build_alias=i686-pc-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -march=k8 -msse2 -pipe -ftracer' ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-O2 -march=k8 -msse2 -pipe -ftracer' ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_F77_set= ac_cv_env_F77_value= ac_cv_env_FFLAGS_set= ac_cv_env_FFLAGS_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=i686-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=i686-pc-linux-gnu ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_exeext= ac_cv_f77_compiler_gnu=yes ac_cv_file__usr_share_hwdata_pci_ids=no ac_cv_file__usr_share_misc_pci_ids=yes ac_cv_file__usr_share_pci_ids=no ac_cv_file__var_lib_misc_pci_ids=no ac_cv_header_dlfcn_h=yes ac_cv_header_expat_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_popt_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_capability_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=i686-pc-linux-gnu ac_cv_host_alias=i686-pc-linux-gnu ac_cv_lib_expat_XML_ParserCreate=yes ac_cv_lib_popt_poptGetContext=yes ac_cv_lib_selinux_selinux_removable_context_path=no ac_cv_objext=o ac_cv_path_DOCBOOK=no ac_cv_path_DOXYGEN=no ac_cv_path_INTLTOOL_PERL=/usr/bin/perl ac_cv_path_PKG_CONFIG=/usr/bin/pkg-config ac_cv_path_PYTHON=/usr/bin/python ac_cv_path_install='/bin/install -c' ac_cv_prog_AWK=gawk ac_cv_prog_CC=gcc ac_cv_prog_CPP='gcc -E' ac_cv_prog_CXXCPP='g++ -E' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_ac_ct_F77=g77 ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_g=yes ac_cv_prog_cc_stdc= ac_cv_prog_cxx_g=yes ac_cv_prog_egrep='grep -E' ac_cv_prog_f77_g=yes ac_cv_prog_make_make_set=yes ac_cv_search_strerror='none required' ac_cv_sys_file_offset_bits=no ac_cv_sys_large_files=no ac_cv_sys_largefile_CC=no am_cv_CC_dependencies_compiler_type=gcc3 am_cv_CXX_dependencies_compiler_type=gcc3 am_cv_prog_cc_stdc= am_cv_python_platform=linux2 am_cv_python_pyexecdir='${exec_prefix}/lib64/python2.4/site-packages' am_cv_python_pythondir='${prefix}/lib/python2.4/site-packages' am_cv_python_version=2.4 lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file='/lib/libc.so.6 /lib/libc-2.3.5.so' lt_cv_ld_reload_flag=-r lt_cv_objdir=.libs lt_cv_path_LD=/usr/x86_64-pc-linux-gnu/bin/ld lt_cv_path_LDCXX=/usr/x86_64-pc-linux-gnu/bin/ld lt_cv_path_NM=nm lt_cv_path_SED=/bin/sed lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_c_o_F77=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\''' lt_cv_sys_max_cmd_len=32768 lt_lt_cv_prog_compiler_c_o='"yes"' lt_lt_cv_prog_compiler_c_o_CXX='"yes"' lt_lt_cv_prog_compiler_c_o_F77='"yes"' lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'\''"' lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"' lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run aclocal-1.9' ALL_LINGUAS='da fr de nl ru hu pt it zh_TW' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run tar' AR='ar' AUTOCONF='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run autoconf' AUTOHEADER='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run autoheader' AUTOMAKE='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run automake-1.9' AWK='gawk' BINDIR='/usr/bin' CATALOGS='' CATOBJEXT='' CC='gcc' CCDEPMODE='depmode=gcc3' CFLAGS='-O2 -march=k8 -msse2 -pipe -ftracer -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare' CPP='gcc -E' CPPFLAGS='' CXX='g++' CXXCPP='g++ -E' CXXDEPMODE='depmode=gcc3' CXXFLAGS='-O2 -march=k8 -msse2 -pipe -ftracer' CYGPATH_W='echo' DATADIR='/usr/share' DATADIRNAME='' DBUS_CFLAGS='-I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include ' DBUS_LIBS='-ldbus-1 ' DBUS_SYS_DIR='/etc/dbus-1/system.d' DEFS='' DEPDIR='.deps' DOCBOOK='no' DOCBOOK_DOCS_ENABLED_FALSE='' DOCBOOK_DOCS_ENABLED_TRUE='#' DOXYGEN='no' DOXYGEN_DOCS_ENABLED_FALSE='' DOXYGEN_DOCS_ENABLED_TRUE='#' ECHO='echo' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='grep -E' EXEEXT='' EXPAT_LIB='-lexpat' F77='g77' FFLAGS='-g -O2' FSTAB_SYNC_ENABLED='' FSTAB_SYNC_ENABLED_FALSE='#' FSTAB_SYNC_ENABLED_TRUE='' GETTEXT_PACKAGE='hal' GMOFILES='' GMSGFMT='' HALD_PID_FILE='/var/run/hald/hald.pid' HAL_GROUP='haldaemon' HAL_USER='haldaemon' HAVE_SELINUX_FALSE='' HAVE_SELINUX_TRUE='#' HOTPLUG_MAP_ENABLED='' HOTPLUG_MAP_ENABLED_FALSE='#' HOTPLUG_MAP_ENABLED_TRUE='' HWDATA_DIR='/usr/share/misc' INIT_SCRIPTS_RED_HAT_FALSE='' INIT_SCRIPTS_RED_HAT_TRUE='#' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s' INSTOBJEXT='' INTLLIBS='' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_MERGE='$(top_builddir)/intltool-merge' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PERL='/usr/bin/perl' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UPDATE='$(top_builddir)/intltool-update' INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' LDFLAGS='' LIBDIR='/usr/lib64' LIBOBJS='' LIBS='-lpopt ' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LINUX_HOTPLUG_DIR='/etc/hotplug.d' LN_S='ln -s' LOCALSTATEDIR='/var/lib' LTLIBOBJS='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='${SHELL} /var/tmp/portage/hal-0.4.8/work/hal-0.4.8/missing --run makeinfo' MKINSTALLDIRS='' MSGFMT='' OBJEXT='o' PACKAGE='hal' PACKAGE_BUGREPORT='david@fubar.dk' PACKAGE_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include ' PACKAGE_LIBS='-lgobject-2.0 -ldbus-glib-1 -lglib-2.0 -ldbus-1 ' PACKAGE_NAME='hal' PACKAGE_STRING='hal 0.4.8' PACKAGE_TARNAME='hal' PACKAGE_VERSION='0.4.8' PATH_SEPARATOR=':' PCMCIA_STAB_FILE='/var/lib/pcmcia/stab' PCMCIA_SUPPORT_ENABLE='' PCMCIA_SUPPORT_ENABLE_FALSE='#' PCMCIA_SUPPORT_ENABLE_TRUE='' PKG_CONFIG='/usr/bin/pkg-config' POFILES='' POSUB='' PO_IN_DATADIR_FALSE='' PO_IN_DATADIR_TRUE='' PYTHON='/usr/bin/python' PYTHON_EXEC_PREFIX='${exec_prefix}' PYTHON_PLATFORM='linux2' PYTHON_PREFIX='${prefix}' PYTHON_VERSION='2.4' RANLIB='ranlib' SBINDIR='/usr/sbin' SET_MAKE='' SHELL='/bin/sh' STRIP='strip' SYSCONFDIR='/etc' SYSFS_CARRIER_ENABLE='' SYSFS_CARRIER_ENABLE_FALSE='#' SYSFS_CARRIER_ENABLE_TRUE='' USE_NLS='' VERSION='0.4.8' XGETTEXT='' ac_ct_AR='ar' ac_ct_CC='gcc' ac_ct_CXX='g++' ac_ct_F77='g77' ac_ct_RANLIB='ranlib' ac_ct_STRIP='strip' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='#' am__fastdepCXX_TRUE='' am__include='include' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='i686-pc-linux-gnu' build_alias='i686-pc-linux-gnu' build_cpu='i686' build_os='linux-gnu' build_vendor='pc' datadir='/usr/share' exec_prefix='NONE' host='i686-pc-linux-gnu' host_alias='i686-pc-linux-gnu' host_cpu='i686' host_os='linux-gnu' host_vendor='pc' includedir='${prefix}/include' infodir='/usr/share/info' install_sh='/var/tmp/portage/hal-0.4.8/work/hal-0.4.8/install-sh' libdir='/usr/lib64' libexecdir='${exec_prefix}/libexec' localstatedir='/var/lib' mandir='/usr/share/man' mkdir_p='mkdir -p --' oldincludedir='/usr/include' pkgpyexecdir='${pyexecdir}/hal' pkgpythondir='${pythondir}/hal' prefix='/usr' program_transform_name='s,x,x,' pyexecdir='${exec_prefix}/lib64/python2.4/site-packages' pythondir='${prefix}/lib/python2.4/site-packages' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define DBUS_API_SUBJECT_TO_CHANGE #define DBUS_SYSTEMD_DIR "/etc/dbus-1/system.d" #define FSTAB_SYNC_ENABLED 1 #define GETTEXT_PACKAGE "hal" #define HALD_PID_FILE "/var/run/hald/hald.pid" #define HAL_GROUP "haldaemon" #define HAL_USER "haldaemon" #define HAVE_DLFCN_H 1 #define HAVE_EXPAT_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_LIBPOPT 1 #define HAVE_MEMORY_H 1 #define HAVE_POPT_H 1 #define HAVE_STDINT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRINGS_H 1 #define HAVE_STRING_H 1 #define HAVE_SYS_CAPABILITY_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_UNISTD_H 1 #define HOTPLUG_MAP_ENABLED 1 #define HWDATA_DIR "/usr/share/misc" #define LINUX_HOTPLUG_DIR "/etc/hotplug.d" #define PACKAGE "hal" #define PACKAGE_BUGREPORT "david@fubar.dk" #define PACKAGE_NAME "hal" #define PACKAGE_STRING "hal 0.4.8" #define PACKAGE_TARNAME "hal" #define PACKAGE_VERSION "0.4.8" #define PCMCIA_STAB_FILE "/var/lib/pcmcia/stab" #define PCMCIA_SUPPORT_ENABLE 1 #define STDC_HEADERS 1 #define SYSFS_CARRIER_ENABLE 1 #define VERSION "0.4.8" #endif #ifdef __cplusplus extern "C" void std::exit (int) throw (); using std::exit; configure: exit 1