* Package: dev-db/pgpool2-4.0.5 * Repository: gentoo * Maintainer: pgsql-bugs@gentoo.org * USE: abi_x86_64 amd64 elibc_glibc kernel_linux pam postgres_targets_postgres10 postgres_targets_postgres11 ssl userland_GNU * FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox @@@@@ PLEASE PAY ATTENTION HERE!!! @@@@@ This information may help you to understand if this is a duplicate or if this bug exists after you pushed a fix; This ebuild was merged at the following commit: https://github.com/gentoo-mirror/gentoo/commit/5dae95270518896e33c63e5643b6736667bce6b4 @@@@@ END @@@@@ * Multibuild variants: 11 10 >>> Unpacking source... >>> Unpacking pgpool-II-4.0.5.tar.gz to /var/tmp/portage/dev-db/pgpool2-4.0.5/work >>> Source unpacked in /var/tmp/portage/dev-db/pgpool2-4.0.5/work >>> Preparing source in /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5 ... * Applying pgpool-configure-memcached.patch ... [ ok ] * Applying pgpool-configure-pam.patch ... [ ok ] * Applying pgpool-configure-pthread.patch ... [ ok ] * Applying pgpool_run_paths-3.7.10.patch ... patching file src/include/parser/pg_config_manual.h Hunk #1 succeeded at 204 (offset -4 lines). patching file src/include/pcp/pcp_stream.h Hunk #1 succeeded at 49 with fuzz 2 (offset 1 line). patching file src/include/pool.h Hunk #1 succeeded at 74 (offset 2 lines). patching file src/sample/pgpool.conf.sample Hunk #3 succeeded at 221 (offset 8 lines). Hunk #4 succeeded at 551 (offset 43 lines). patching file src/sample/pgpool.conf.sample-logical Hunk #3 succeeded at 221 (offset 7 lines). Hunk #4 succeeded at 535 (offset 28 lines). patching file src/sample/pgpool.conf.sample-master-slave Hunk #3 succeeded at 220 (offset 7 lines). Hunk #4 succeeded at 550 (offset 43 lines). patching file src/sample/pgpool.conf.sample-replication Hunk #3 succeeded at 219 (offset 7 lines). Hunk #4 succeeded at 549 (offset 43 lines). patching file src/sample/pgpool.conf.sample-stream Hunk #3 succeeded at 221 (offset 7 lines). Hunk #4 succeeded at 549 (offset 42 lines). [ ok ] * Running eautoreconf in '/var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5' ... * Running libtoolize --install --copy --force --automake ... [ ok ] * Running aclocal -I m4 ... [ ok ] * Running autoconf --force ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy --force-missing ... [ ok ] * Running elibtoolize in: pgpool-II-4.0.5/ * Applying portage/1.2.0 patch ... * Applying sed/1.5.6 patch ... * Applying as-needed/2.4.3 patch ... * Will copy sources from /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5 * 11: copying to /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5-11 * 10: copying to /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5-10 >>> Source prepared. >>> Configuring source in /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5 ... * 11: running run_in_build_dir econf --disable-rpath --sysconfdir=/etc/pgpool2 --with-pgsql-includedir=/usr/include/postgresql-@PG_SLOT@ --with-pgsql-libdir=/usr/lib64/postgresql-@PG_SLOT@/lib64 --disable-static --without-memcached --with-pam --with-openssl * econf: updating pgpool-II-4.0.5/config.sub with /usr/share/gnuconfig/config.sub * econf: updating pgpool-II-4.0.5/config.guess with /usr/share/gnuconfig/config.guess * econf: updating pgpool-II-4.0.5-11/config.sub with /usr/share/gnuconfig/config.sub * econf: updating pgpool-II-4.0.5-11/config.guess with /usr/share/gnuconfig/config.guess * econf: updating pgpool-II-4.0.5-10/config.sub with /usr/share/gnuconfig/config.sub * econf: updating pgpool-II-4.0.5-10/config.guess with /usr/share/gnuconfig/config.guess ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-silent-rules --docdir=/usr/share/doc/pgpool2-4.0.5 --htmldir=/usr/share/doc/pgpool2-4.0.5/html --libdir=/usr/lib64 --disable-rpath --sysconfdir=/etc/pgpool2 --with-pgsql-includedir=/usr/include/postgresql-11 --with-pgsql-libdir=/usr/lib64/postgresql-11/lib64 --disable-static --without-memcached --with-pam --with-openssl checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-clang checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-pc-linux-gnu-clang accepts -g... yes checking for x86_64-pc-linux-gnu-clang option to accept ISO C89... none needed checking whether x86_64-pc-linux-gnu-clang understands -c and -o together... yes ./configure: line 3445: AX_PTHREAD: command not found checking for a BSD-compatible install... /usr/lib/portage/python3.7/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by ... ld.lld checking if the linker (ld.lld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... llvm-nm checking the name lister (llvm-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for ld.lld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... llvm-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... llvm-ar checking for archiver @FILE support... no checking for x86_64-pc-linux-gnu-strip... llvm-strip checking for x86_64-pc-linux-gnu-ranlib... llvm-ranlib checking command to parse llvm-nm output from object... failed checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for x86_64-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... x86_64-pc-linux-gnu-clang-cpp checking for ANSI C header files... no checking for sys/types.h... no checking for sys/stat.h... no checking for stdlib.h... no checking for string.h... no checking for memory.h... no checking for strings.h... no checking for inttypes.h... no checking for stdint.h... no checking for unistd.h... no checking for dlfcn.h... no checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... no checking if cc static flag -static works... no checking if cc supports -c -o file.o... no checking if cc supports -c -o file.o... (cached) no checking if we can lock with hard links... yes checking whether the cc linker (ld.lld) supports shared libraries... yes checking whether -lc should be explicitly linked in... checking dynamic linker characteristics... ./configure: line 10503: cc: command not found GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for bison... bison -y checking for onsgmls... onsgmls checking for openjade... no checking for jade... no checking for DocBook V4.2... no checking for DocBook stylesheets... no checking for collateindex.pl... no checking for xsltproc... xsltproc checking for xmllint... xmllint checking for osx... osx checking for perl... perl checking for lynx... no checking for -Wall option... no checking for -Wmissing-prototypes option... no checking for -Wmissing-declarations option... no checking for main in -lm... no checking for main in -lnsl... no checking for main in -lsocket... no checking for main in -lipc... no checking for main in -lIPC... no checking for main in -llc... no checking for main in -lBSD... no checking for main in -lgen... no checking for main in -lPW... no checking for main in -lresolv... no checking for main in -lcrypt... no checking for strlcat,... no checking for strlcpy... no checking for ANSI C header files... (cached) no checking for sys/wait.h that is POSIX.1 compatible... no checking fcntl.h usability... no checking fcntl.h presence... yes configure: WARNING: fcntl.h: present but cannot be compiled configure: WARNING: fcntl.h: check for missing prerequisite headers? configure: WARNING: fcntl.h: see the Autoconf documentation configure: WARNING: fcntl.h: section "Present But Cannot Be Compiled" configure: WARNING: fcntl.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for fcntl.h... no checking for unistd.h... (cached) no checking getopt.h usability... no checking getopt.h presence... yes configure: WARNING: getopt.h: present but cannot be compiled configure: WARNING: getopt.h: check for missing prerequisite headers? configure: WARNING: getopt.h: see the Autoconf documentation configure: WARNING: getopt.h: section "Present But Cannot Be Compiled" configure: WARNING: getopt.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for getopt.h... no checking netinet/tcp.h usability... no checking netinet/tcp.h presence... yes configure: WARNING: netinet/tcp.h: present but cannot be compiled configure: WARNING: netinet/tcp.h: check for missing prerequisite headers? configure: WARNING: netinet/tcp.h: see the Autoconf documentation configure: WARNING: netinet/tcp.h: section "Present But Cannot Be Compiled" configure: WARNING: netinet/tcp.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for netinet/tcp.h... no checking netinet/in.h usability... no checking netinet/in.h presence... yes configure: WARNING: netinet/in.h: present but cannot be compiled configure: WARNING: netinet/in.h: check for missing prerequisite headers? configure: WARNING: netinet/in.h: see the Autoconf documentation configure: WARNING: netinet/in.h: section "Present But Cannot Be Compiled" configure: WARNING: netinet/in.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for netinet/in.h... no checking netdb.h usability... no checking netdb.h presence... yes configure: WARNING: netdb.h: present but cannot be compiled configure: WARNING: netdb.h: check for missing prerequisite headers? configure: WARNING: netdb.h: see the Autoconf documentation configure: WARNING: netdb.h: section "Present But Cannot Be Compiled" configure: WARNING: netdb.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for netdb.h... no checking sys/param.h usability... no checking sys/param.h presence... yes configure: WARNING: sys/param.h: present but cannot be compiled configure: WARNING: sys/param.h: check for missing prerequisite headers? configure: WARNING: sys/param.h: see the Autoconf documentation configure: WARNING: sys/param.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/param.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/param.h... no checking for sys/types.h... (cached) no checking sys/socket.h usability... no checking sys/socket.h presence... yes configure: WARNING: sys/socket.h: present but cannot be compiled configure: WARNING: sys/socket.h: check for missing prerequisite headers? configure: WARNING: sys/socket.h: see the Autoconf documentation configure: WARNING: sys/socket.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/socket.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/socket.h... no checking sys/un.h usability... no checking sys/un.h presence... yes configure: WARNING: sys/un.h: present but cannot be compiled configure: WARNING: sys/un.h: check for missing prerequisite headers? configure: WARNING: sys/un.h: see the Autoconf documentation configure: WARNING: sys/un.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/un.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/un.h... no checking sys/time.h usability... no checking sys/time.h presence... yes configure: WARNING: sys/time.h: present but cannot be compiled configure: WARNING: sys/time.h: check for missing prerequisite headers? configure: WARNING: sys/time.h: see the Autoconf documentation configure: WARNING: sys/time.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/time.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/time.h... no checking sys/sem.h usability... no checking sys/sem.h presence... yes configure: WARNING: sys/sem.h: present but cannot be compiled configure: WARNING: sys/sem.h: check for missing prerequisite headers? configure: WARNING: sys/sem.h: see the Autoconf documentation configure: WARNING: sys/sem.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/sem.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/sem.h... no checking sys/shm.h usability... no checking sys/shm.h presence... yes configure: WARNING: sys/shm.h: present but cannot be compiled configure: WARNING: sys/shm.h: check for missing prerequisite headers? configure: WARNING: sys/shm.h: see the Autoconf documentation configure: WARNING: sys/shm.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/shm.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/shm.h... no checking sys/select.h usability... no checking sys/select.h presence... yes configure: WARNING: sys/select.h: present but cannot be compiled configure: WARNING: sys/select.h: check for missing prerequisite headers? configure: WARNING: sys/select.h: see the Autoconf documentation configure: WARNING: sys/select.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/select.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for sys/select.h... no checking crypt.h usability... no checking crypt.h presence... yes configure: WARNING: crypt.h: present but cannot be compiled configure: WARNING: crypt.h: check for missing prerequisite headers? configure: WARNING: crypt.h: see the Autoconf documentation configure: WARNING: crypt.h: section "Present But Cannot Be Compiled" configure: WARNING: crypt.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for crypt.h... no checking sys/pstat.h usability... no checking sys/pstat.h presence... no checking for sys/pstat.h... no checking termios.h usability... no checking termios.h presence... yes configure: WARNING: termios.h: present but cannot be compiled configure: WARNING: termios.h: check for missing prerequisite headers? configure: WARNING: termios.h: see the Autoconf documentation configure: WARNING: termios.h: section "Present But Cannot Be Compiled" configure: WARNING: termios.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------------- ## configure: WARNING: ## Report this to pgpool-hackers@pgpool.net ## configure: WARNING: ## ---------------------------------------- ## checking for termios.h... no checking for an ANSI C-conforming const... no checking for pid_t... no checking whether time.h and sys/time.h may both be included... no checking for snprintf... no checking for vsnprintf... no checking whether long int is 64 bits... no checking whether long long int is 64 bits... no checking whether cc supports -Wformat-truncation, for NOT_THE_CFLAGS... no checking size of unsigned long... 0 checking size of void *... 0 checking size of size_t... 0 checking whether to build with float4 passed by value... yes checking whether to build with float8 passed by value... no checking for struct sockaddr_storage... no checking for struct sockaddr_storage.ss_family... no checking for struct sockaddr_storage.__ss_family... no checking for struct sockaddr_storage.ss_len... no checking for struct sockaddr_storage.__ss_len... no checking for struct sockaddr.sa_len... no checking for union semun... no checking return type of signal handlers... void checking for vprintf... no checking for wait3 that fills in rusage... no checking types of arguments for accept()... configure: error: could not determine argument types !!! Please attach the following file when seeking support: !!! /var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5-11/config.log * ERROR: dev-db/pgpool2-4.0.5::gentoo failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 125: Called src_configure * environment, line 2199: Called postgres-multi_foreach 'econf' '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-@PG_SLOT@' '--with-pgsql-libdir=/usr/lib64/postgresql-@PG_SLOT@/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * environment, line 2058: Called multibuild_foreach_variant '_postgres-multi_multibuild_wrapper' 'run_in_build_dir' 'econf' '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-@PG_SLOT@' '--with-pgsql-libdir=/usr/lib64/postgresql-@PG_SLOT@/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * environment, line 1800: Called _multibuild_run '_postgres-multi_multibuild_wrapper' 'run_in_build_dir' 'econf' '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-@PG_SLOT@' '--with-pgsql-libdir=/usr/lib64/postgresql-@PG_SLOT@/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * environment, line 1798: Called _postgres-multi_multibuild_wrapper 'run_in_build_dir' 'econf' '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-@PG_SLOT@' '--with-pgsql-libdir=/usr/lib64/postgresql-@PG_SLOT@/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * environment, line 426: Called run_in_build_dir 'econf' '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-11' '--with-pgsql-libdir=/usr/lib64/postgresql-11/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * environment, line 2187: Called econf '--disable-rpath' '--sysconfdir=/etc/pgpool2' '--with-pgsql-includedir=/usr/include/postgresql-11' '--with-pgsql-libdir=/usr/lib64/postgresql-11/lib64' '--disable-static' '--without-memcached' '--with-pam' '--with-openssl' * phase-helpers.sh, line 681: Called __helpers_die 'econf failed' * isolated-functions.sh, line 112: Called die * The specific snippet of code: * die "$@" * * If you need support, post the output of `emerge --info '=dev-db/pgpool2-4.0.5::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-db/pgpool2-4.0.5::gentoo'`. * The complete build log is located at '/var/log/emerge-log/build/dev-db/pgpool2-4.0.5:20200626-080034.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-db/pgpool2-4.0.5/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-db/pgpool2-4.0.5/temp/environment'. * Working directory: '/var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5-11' * S: '/var/tmp/portage/dev-db/pgpool2-4.0.5/work/pgpool-II-4.0.5' emerge --info: Portage 2.3.103 (python 3.7.7-final-0, default/linux/amd64/17.1, gcc-10.1.0, glibc-2.31-r5, 5.4.0-1015-aws x86_64) ================================================================= System uname: Linux-5.4.0-1015-aws-x86_64-AMD_EPYC_7571-with-gentoo-2.7 KiB Mem: 7895548 total, 2556784 free KiB Swap: 0 total, 0 free Timestamp of repository gentoo: Fri, 26 Jun 2020 09:35:16 +0000 sh bash 5.0_p17 ld GNU ld (Gentoo 2.34 p4) 2.34.0 app-shells/bash: 5.0_p17::gentoo dev-lang/perl: 5.30.3-r2::gentoo dev-lang/python: 2.7.18::gentoo, 3.7.7-r2::gentoo, 3.8.3::gentoo, 3.9.0_beta3::gentoo dev-util/cmake: 3.18.0_rc2::gentoo dev-util/pkgconfig: 0.29.2::gentoo sys-apps/baselayout: 2.7::gentoo sys-apps/openrc: 0.42.1::gentoo sys-apps/sandbox: 2.20::gentoo sys-devel/autoconf: 2.69-r5::gentoo sys-devel/automake: 1.16.2::gentoo sys-devel/binutils: 2.34-r1::gentoo sys-devel/gcc: 10.1.0-r1::gentoo sys-devel/gcc-config: 2.3.1::gentoo sys-devel/libtool: 2.4.6-r6::gentoo sys-devel/make: 4.3::gentoo sys-kernel/linux-headers: 5.7::gentoo (virtual/os-headers) sys-libs/glibc: 2.31-r5::gentoo Repositories: gentoo location: /usr/portage sync-type: rsync sync-uri: rsync://rsync.gentoo.org/gentoo-portage priority: -1000 sync-rsync-extra-opts: sync-rsync-verify-jobs: 1 sync-rsync-verify-max-age: 24 sync-rsync-verify-metamanifest: yes ACCEPT_KEYWORDS="amd64 ~amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CC="x86_64-pc-linux-gnu-clang" CFLAGS="-O2 -pipe -march=native -frecord-gcc-switches -fno-diagnostics-color" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXX="x86_64-pc-linux-gnu-clang++" CXXFLAGS="-O2 -pipe -march=native -frecord-gcc-switches -fno-diagnostics-color" DISTDIR="/usr/portage/distfiles" EMERGE_DEFAULT_OPTS="--with-bdeps=y --binpkg-respect-use=y -1 -b -k" ENV_UNSET="DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR" FCFLAGS="-O2 -pipe -march=native -frecord-gcc-switches -fno-diagnostics-color" FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs buildpkg collision-protect config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms sign split-log strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr" FFLAGS="-O2 -pipe -march=native -frecord-gcc-switches -fno-diagnostics-color" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="C.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed -fuse-ld=lld -Wl,--defsym=__gentoo_check_ldflags__=0" MAKEOPTS="-j2 V=1" PKGDIR="/root/.packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git" PORTAGE_TMPDIR="/var/tmp" USE="acl amd64 berkdb bzip2 cli crypt dri fortran gdbm iconv ipv6 libtirpc multilib ncurses nls nptl openmp pam pcre readline seccomp split-usr ssl tcpd unicode xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_7" PYTHON_TARGETS="python2_7 python3_7" RUBY_TARGETS="ruby25" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS