* Package: dev-libs/cyberjack-3.99.5_p13 * Repository: gentoo * Maintainer: conikost@gentoo.org * USE: abi_x86_64 amd64 elibc_glibc kernel_linux udev usb userland_GNU * FEATURES: network-sandbox preserve-libs sandbox test userpriv usersandbox * Determining the location of the kernel source code * Unable to find kernel sources at /usr/src/linux * Please make sure that /usr/src/linux points at your running kernel, * (or the kernel you wish to build against). * Alternatively, set the KERNEL_DIR environment variable to the kernel sources location * Unable to calculate Linux Kernel version for build, attempting to use running version * Unable to check for the following kernel config options due * to absence of any configured kernel sources or compiled * config: * - USB_SERIAL_CYBERJACK * You're on your own to make sure they are set if needed. >>> Unpacking source... >>> Unpacking pcsc-cyberjack_3.99.5final.SP13.tar.gz to /var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work >>> Source unpacked in /var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work >>> Preparing source in /var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13 ... * Running eautoreconf in '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13' ... * Running libtoolize --install --copy --force --automake ... [ ok ] * Running aclocal -I m4 ... [ ok ] * Running autoconf --force ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy --foreign --force-missing ... [ ok ] * Running elibtoolize in: pcsc-cyberjack-3.99.5final.SP13/ * Applying portage/1.2.0 patch ... * Applying sed/1.5.6 patch ... * Applying as-needed/2.4.3 patch ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13 ... * econf: updating pcsc-cyberjack-3.99.5final.SP13/config.sub with /usr/share/gnuconfig/config.sub * econf: updating pcsc-cyberjack-3.99.5final.SP13/config.guess with /usr/share/gnuconfig/config.guess ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/cyberjack-3.99.5_p13 --htmldir=/usr/share/doc/cyberjack-3.99.5_p13/html --with-sysroot=/ --libdir=/usr/lib64 --disable-debug --disable-error-on-warning --disable-hal --disable-mac-universal --disable-mac-arches-i386 --disable-mac-arches-x86_64 --disable-visibility --enable-pcsc --enable-release --enable-warnings --sysconfdir=/etc/cyberjack --disable-static --disable-threads --enable-udev --enable-nonserial --disable-xml2 --with-usbdropdir=/usr/lib64/readers/usb checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... yes checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-ld checking if the linker (x86_64-pc-linux-gnu-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... x86_64-pc-linux-gnu-nm checking the name lister (x86_64-pc-linux-gnu-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for x86_64-pc-linux-gnu-ld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar checking for archiver @FILE support... @ checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib checking for gawk... gawk checking command to parse x86_64-pc-linux-gnu-nm output from x86_64-pc-linux-gnu-gcc object... ok checking for sysroot... / checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for x86_64-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-gcc linker (x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... /usr/lib/portage/python3.7/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of x86_64-pc-linux-gnu-gcc... none checking target system type... posix checking for x86_64-pc-linux-gnu-gcc... (cached) x86_64-pc-linux-gnu-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... (cached) yes checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... (cached) none needed checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... (cached) yes checking whether we are using the GNU C++ compiler... yes checking whether x86_64-pc-linux-gnu-g++ accepts -g... yes checking how to run the C++ preprocessor... x86_64-pc-linux-gnu-g++ -E checking for ld used by x86_64-pc-linux-gnu-g++... x86_64-pc-linux-gnu-ld -m elf_x86_64 checking if the linker (x86_64-pc-linux-gnu-ld -m elf_x86_64) is GNU ld... yes checking whether the x86_64-pc-linux-gnu-g++ linker (x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes checking for x86_64-pc-linux-gnu-g++ option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-g++ static flag -static works... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-g++ linker (x86_64-pc-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking dependency style of x86_64-pc-linux-gnu-g++... none checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether we are using the GNU Objective C compiler... no checking whether x86_64-pc-linux-gnu-gcc accepts -g... no checking dependency style of x86_64-pc-linux-gnu-gcc... none checking for x86_64-pc-linux-gnu-windres... no checking for windres... no checking for gawk... (cached) gawk checking for sed... /bin/sed ./configure: line 13492: ACX_PTHREAD: command not found checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for library containing dlopen... -ldl checking for ANSI C header files... (cached) yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for an ANSI C-conforming const... yes checking whether non-serial access is wanted... checking whether non-serial access is wanted... yes checking for libusb... yes checking if HAL support desired... no checking if PC/SC should be used... yes checking for pcsc includes... -I/usr/include -I/usr/include/PCSC checking for pcsc libs... -L/usr/lib64 -lpcsclite checking for PCSC... yes checking if XML2 is allowed... no checking whether this is an official release... yes checking whether the threaded approach is wanted... no checking if symbol visibility is supported... no no (not wanted) checking whether this is an RPM distribution... which: no rpm in (/usr/lib/portage/python3.7/ebuild-helpers/xattr:/usr/lib/portage/python3.7/ebuild-helpers:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin) no (no RPM installed) checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating cjeca32/Makefile config.status: creating cjeca32/ausb/Makefile config.status: creating ifd/Makefile config.status: creating ifd/Info.plist config.status: creating libcyberjack/Makefile config.status: creating libcyberjack/libdialog/Makefile config.status: creating libcyberjack/libdialog/base/Makefile config.status: creating libcyberjack/checksuite/Makefile config.status: creating tools/Makefile config.status: creating tools/cjflash/Makefile config.status: creating tools/cjgeldkarte/Makefile config.status: creating tools/cjBingo/Makefile config.status: creating include/Makefile config.status: creating include/macosx/Makefile config.status: creating include/macosx/PCSC/Makefile config.status: creating m4/Makefile config.status: creating etc/Makefile config.status: creating ifd-cyberjack.spec config.status: creating doc/Makefile config.status: creating config.h config.status: executing libtool commands config.status: executing depfiles commands >>> Source configured. >>> Compiling source in /var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13 ... make -j4 make all-recursive make[1]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13' Making all in m4 make[2]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/m4' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/m4' Making all in include make[2]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include' Making all in macosx make[3]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx' Making all in PCSC make[4]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx/PCSC' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx/PCSC' make[4]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx' make[3]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include/macosx' make[3]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include' make[2]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/include' Making all in cjeca32 make[2]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32' Making all in ausb make[3]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32/ausb' /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb_libusb0.lo ausb_libusb0.c /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb_libusb1.lo ausb_libusb1.c /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb.lo ausb.c /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb1.lo ausb1.c libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb_libusb0.c -fPIC -DPIC -o .libs/ausb_libusb0.o libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb_libusb1.c -fPIC -DPIC -o .libs/ausb_libusb1.o libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb.c -fPIC -DPIC -o .libs/ausb.o libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb1.c -fPIC -DPIC -o .libs/ausb1.o /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb11.lo ausb11.c /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb3.lo ausb3.c /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ausb31.lo ausb31.c libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb11.c -fPIC -DPIC -o .libs/ausb11.o libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb3.c -fPIC -DPIC -o .libs/ausb3.o /bin/sh ../../libtool --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o usbdev.lo usbdev.c libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ausb31.c -fPIC -DPIC -o .libs/ausb31.o libtool: compile: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I. -I.. -I../../include -I../../ctapi -I/usr/include/libusb-1.0 -DBUILDING_CYBERJACK -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -c usbdev.c -fPIC -DPIC -o .libs/usbdev.o /bin/sh ../../libtool --tag=CC --mode=link x86_64-pc-linux-gnu-gcc -DBUILDING_CYBERJACK -O2 -pipe -march=native -frecord-gcc-switches -Wall -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 -o libausb.la ausb_libusb0.lo ausb_libusb1.lo ausb.lo ausb1.lo ausb11.lo ausb3.lo ausb31.lo usbdev.lo -lusb-1.0 libtool: link: x86_64-pc-linux-gnu-ar cru .libs/libausb.a .libs/ausb_libusb0.o .libs/ausb_libusb1.o .libs/ausb.o .libs/ausb1.o .libs/ausb11.o .libs/ausb3.o .libs/ausb31.o .libs/usbdev.o libtool: link: x86_64-pc-linux-gnu-ranlib .libs/libausb.a libtool: link: ( cd ".libs" && rm -f "libausb.la" && ln -s "../libausb.la" "libausb.la" ) make[3]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32/ausb' make[3]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32' /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o BaseCommunication.lo BaseCommunication.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o BaseReader.lo BaseReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o BaseTranslater.lo BaseTranslater.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o CCIDReader.lo CCIDReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c BaseCommunication.cpp -fPIC -DPIC -o .libs/BaseCommunication.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c BaseReader.cpp -fPIC -DPIC -o .libs/BaseReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c BaseTranslater.cpp -fPIC -DPIC -o .libs/BaseTranslater.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c CCIDReader.cpp -fPIC -DPIC -o .libs/CCIDReader.o CCIDReader.cpp:10: warning: ignoring ‘#pragma warning ’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunknown-pragmas-Wunknown-pragmas]8;;] 10 | #pragma warning (disable:4366) | /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o Debug.lo Debug.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c Debug.cpp -fPIC -DPIC -o .libs/Debug.o In file included from BaseReader.cpp:1: BaseReader.cpp: In member function ‘virtual char CBaseReader::CtData(uint8_t*, uint8_t*, const uint8_t*, uint16_t, uint8_t*, uint16_t*)’: BaseReader.cpp:89:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 89 | UNREFERENCED_PARAMETER(cmd_len); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:90:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 90 | UNREFERENCED_PARAMETER(cmd); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdGetState(uint32_t*, uint8_t)’: BaseReader.cpp:113:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 113 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdSetAttribute(const uint8_t*, uint32_t)’: BaseReader.cpp:121:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 121 | UNREFERENCED_PARAMETER(Input); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:122:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 122 | UNREFERENCED_PARAMETER(InputLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdGetAttribute(uint32_t, uint8_t*, uint32_t*)’: BaseReader.cpp:129:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 129 | UNREFERENCED_PARAMETER(Attribute); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:130:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 130 | UNREFERENCED_PARAMETER(Tag); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdSwallow(uint8_t)’: BaseReader.cpp:212:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 212 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdEject(uint8_t)’: BaseReader.cpp:219:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 219 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdVendor(uint32_t, uint8_t*, uint32_t, uint8_t*, uint32_t*)’: BaseReader.cpp:226:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 226 | UNREFERENCED_PARAMETER(Input); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:227:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 227 | UNREFERENCED_PARAMETER(Output); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:228:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 228 | UNREFERENCED_PARAMETER(InputLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:229:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 229 | UNREFERENCED_PARAMETER(IoCtrlCode); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: BaseReader.cpp:237:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 237 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:238:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 238 | UNREFERENCED_PARAMETER(response_len); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:239:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 239 | UNREFERENCED_PARAMETER(response); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:240:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 240 | UNREFERENCED_PARAMETER(cmd_len); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:241:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 241 | UNREFERENCED_PARAMETER(cmd); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CBaseReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: BaseReader.cpp:248:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 248 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:249:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 249 | UNREFERENCED_PARAMETER(Timeout); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:250:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 250 | UNREFERENCED_PARAMETER(ATR_Length); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:251:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 251 | UNREFERENCED_PARAMETER(ATR); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:252:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 252 | UNREFERENCED_PARAMETER(Mode); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtLoadModule(uint8_t*, uint32_t, uint8_t*, uint32_t, uint32_t*)’: BaseReader.cpp:342:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 342 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:343:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 343 | UNREFERENCED_PARAMETER(SgnLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:344:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 344 | UNREFERENCED_PARAMETER(pSgn); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:345:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 345 | UNREFERENCED_PARAMETER(DataLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:346:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 346 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtKeyUpdate(uint8_t*, uint32_t, uint32_t*)’: BaseReader.cpp:353:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 353 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:354:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 354 | UNREFERENCED_PARAMETER(DataLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:355:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 355 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtIsKeyUpdateRecommended(uint8_t*, uint32_t, uint32_t*)’: BaseReader.cpp:362:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 362 | UNREFERENCED_PARAMETER(EstimatedUpdateTime); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:363:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 363 | UNREFERENCED_PARAMETER(DataLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:364:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 364 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtDeleteModule(uint32_t, uint32_t*)’: BaseReader.cpp:371:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 371 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:372:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 372 | UNREFERENCED_PARAMETER(ModuleID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtActivateModule(uint32_t, uint32_t*)’: BaseReader.cpp:380:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 380 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:381:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 381 | UNREFERENCED_PARAMETER(ModuleID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtDeactivateModule(uint32_t, uint32_t*)’: BaseReader.cpp:388:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 388 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:389:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 389 | UNREFERENCED_PARAMETER(ModuleID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtDeleteALLModules(uint32_t*)’: BaseReader.cpp:396:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 396 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSetModulestoreInfo(uint8_t*, uint8_t)’: BaseReader.cpp:403:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 403 | UNREFERENCED_PARAMETER(Info); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:404:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 404 | UNREFERENCED_PARAMETER(InfoLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetModulestoreInfo(uint8_t*, uint8_t*)’: BaseReader.cpp:411:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 411 | UNREFERENCED_PARAMETER(Info); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:412:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 412 | UNREFERENCED_PARAMETER(InfoLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetModuleInfoFromFile(uint8_t*, uint32_t, cj_ModuleInfo*, uint32_t*)’: BaseReader.cpp:473:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 473 | UNREFERENCED_PARAMETER(EstimatedUpdateTime); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:474:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 474 | UNREFERENCED_PARAMETER(ModuleInfo); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:475:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 475 | UNREFERENCED_PARAMETER(DataLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:476:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 476 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘CJ_RESULT CBaseReader::CtFreeModuleInfoList(cj_ModuleInfo*)’: BaseReader.cpp:483:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 483 | UNREFERENCED_PARAMETER(pModuleInfo); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtIsModuleUpdateRecommended(uint8_t*, uint32_t, uint32_t*)’: BaseReader.cpp:490:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 490 | UNREFERENCED_PARAMETER(EstimatedUpdateTime); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:491:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 491 | UNREFERENCED_PARAMETER(DataLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:492:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 492 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetActiveModuleID(uint32_t*, uint32_t*)’: BaseReader.cpp:499:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 499 | UNREFERENCED_PARAMETER(ID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:500:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 500 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetActivationID(uint32_t*, uint32_t*)’: BaseReader.cpp:507:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 507 | UNREFERENCED_PARAMETER(ID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:508:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 508 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtApplicationData(uint32_t, uint16_t, uint8_t*, uint32_t, uint32_t*, uint8_t*, uint32_t*, uint8_t*, uint32_t*, uint8_t)’: BaseReader.cpp:515:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 515 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:516:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 516 | UNREFERENCED_PARAMETER(ApplicationErrorLength); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:517:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 517 | UNREFERENCED_PARAMETER(ApplicationError); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:518:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 518 | UNREFERENCED_PARAMETER(ResponseLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:519:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 519 | UNREFERENCED_PARAMETER(ResponseData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:520:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 520 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:521:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 521 | UNREFERENCED_PARAMETER(InputLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:522:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 522 | UNREFERENCED_PARAMETER(InputData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:523:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 523 | UNREFERENCED_PARAMETER(Function); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:524:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 524 | UNREFERENCED_PARAMETER(ApplicationID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSelfTest2(const uint8_t*, uint8_t)’: BaseReader.cpp:537:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 537 | UNREFERENCED_PARAMETER(TransportKey); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:538:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 538 | UNREFERENCED_PARAMETER(KeyNr); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘int CBaseReader::AnalyseATR(bool, uint8_t)’: BaseReader.cpp:747:6: warning: variable ‘hasTA1’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 747 | int hasTA1; | ^~~~~~ In file included from BaseReader.cpp:1: BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSetContrast(EContrast, uint32_t*)’: BaseReader.cpp:956:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 956 | UNREFERENCED_PARAMETER(eContrast); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:957:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 957 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSetBacklight(EBacklight, uint32_t*)’: BaseReader.cpp:964:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 964 | UNREFERENCED_PARAMETER(eBacklight); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:965:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 965 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSetSilentMode(bool, bool*, uint32_t*)’: BaseReader.cpp:973:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 973 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:974:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 974 | UNREFERENCED_PARAMETER(pboolMode); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:975:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 975 | UNREFERENCED_PARAMETER(boolMode); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetSilentMode(bool*, uint32_t*)’: BaseReader.cpp:982:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 982 | UNREFERENCED_PARAMETER(pboolMode); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:983:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 983 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtSetMFT(const uint8_t*, uint32_t, uint32_t*)’: BaseReader.cpp:1009:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1009 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:1010:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1010 | UNREFERENCED_PARAMETER(DataLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp:1011:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1011 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ BaseReader.cpp: In member function ‘virtual CJ_RESULT CBaseReader::CtGetMFT(cj_MFT_Info*, uint32_t*)’: BaseReader.cpp:1018:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1018 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ In file included from CCIDReader.cpp:1: CCIDReader.cpp: In member function ‘virtual CJ_RESULT CCCIDReader::cjOutput(uint8_t, uint8_t*, int)’: CCIDReader.cpp:348:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 348 | UNREFERENCED_PARAMETER(timeout); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:349:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 349 | UNREFERENCED_PARAMETER(tag50); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:350:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 350 | UNREFERENCED_PARAMETER(tag50len); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘virtual CJ_RESULT CCCIDReader::KTLightCall(uint8_t*, uint8_t*, uint8_t*, uint16_t, int32_t, uint8_t*, int32_t, uint8_t*, uint16_t*)’: CCIDReader.cpp:357:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 357 | UNREFERENCED_PARAMETER(Le); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:358:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 358 | UNREFERENCED_PARAMETER(data_ptr); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:359:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 359 | UNREFERENCED_PARAMETER(Lc); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:360:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 360 | UNREFERENCED_PARAMETER(lenc); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:361:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 361 | UNREFERENCED_PARAMETER(cmd); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘char CCCIDReader::_CtData(uint8_t*, uint8_t*, uint8_t*, uint16_t, uint8_t*, uint16_t*)’: CCIDReader.cpp:661:38: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 661 | if(cmd[2]>m_maxSlot || cmd[2]==0 && cmd[3]!=0 || cmd[2]>=1 && cmd[2]<=m_maxSlot && cmd[3]>2) | ~~~~~~~~~~^~~~~~~~~~~~ CCIDReader.cpp:661:85: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 661 | || cmd[2]==0 && cmd[3]!=0 || cmd[2]>=1 && cmd[2]<=m_maxSlot && cmd[3]>2) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ CCIDReader.cpp:784:38: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 784 | if(cmd[2]>m_maxSlot || cmd[2]==0 && cmd[3]!=0 || cmd[2]>=1 && cmd[2]<=m_maxSlot && cmd[3]>2) | ~~~~~~~~~~^~~~~~~~~~~~ CCIDReader.cpp:784:85: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 784 | || cmd[2]==0 && cmd[3]!=0 || cmd[2]>=1 && cmd[2]<=m_maxSlot && cmd[3]>2) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ CCIDReader.cpp:1415:88: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 1415 | d[3]&0x0f)>0x02 || (cmd[3]&0xf0)>0x10 || (cmd[3]&0xf0)==0x10 && Le!=01) | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~ CCIDReader.cpp:1487:18: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 1487 | if(key!=10 && key!=11 || charlen==1) | ~~~~~~~~^~~~~~~~~~ CCIDReader.cpp:2559:64: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 2559 | if(m_p_Slot[cmd[2]-1].m_ActiveProtocol==SCARD_PROTOCOL_T0 && *tag44!=1 || m_p_Slot[cmd[2]-1].m_ActiveProtocol==SCARD_PROTOCOL_T1 && *tag44!=2) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ CCIDReader.cpp:2571:66: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 2571 | if(m_p_Slot[cmd[2]-1].m_ActiveProtocol==SCARD_PROTOCOL_T0 && *tag44==1 || m_p_Slot[cmd[2]-1].m_ActiveProtocol==SCARD_PROTOCOL_T1 && *tag44==2) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o EC30Reader.lo EC30Reader.cpp In file included from CCIDReader.cpp:1: CCIDReader.cpp: In member function ‘virtual int CCCIDReader::cjccid_SecurePV(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t*, uint8_t*, int, uint8_t*, int*, uint8_t*, uint8_t, uint8_t, uint8_t, uint8_t)’: CCIDReader.cpp:2822:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2822 | UNREFERENCED_PARAMETER(Textlen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:2823:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2823 | UNREFERENCED_PARAMETER(Text); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘virtual int CCCIDReader::cjccid_SecureMV(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t*, uint8_t, uint8_t, uint8_t*, int, uint8_t*, int*, int, uint8_t**, uint8_t*, uint8_t*, uint8_t, uint8_t*, uint8_t)’: CCIDReader.cpp:2899:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2899 | UNREFERENCED_PARAMETER(pDiversifier); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:2900:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2900 | UNREFERENCED_PARAMETER(Textlen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:2901:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2901 | UNREFERENCED_PARAMETER(Text); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:2902:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 2902 | UNREFERENCED_PARAMETER(TextCount); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘virtual bool CCCIDReader::PinDirectSupported()’: CCIDReader.cpp:3092:47: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 3092 | if(Info->Version<0x30 || Info->Version==0x30 && Info->Revision<42) | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ In file included from CCIDReader.cpp:1: CCIDReader.cpp: In member function ‘virtual void CCCIDReader::CheckReaderDepended(CCID_Message&)’: CCIDReader.cpp:3246:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 3246 | UNREFERENCED_PARAMETER(Message); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘virtual CJ_RESULT CCCIDReader::SetSMModeAndCount(uint32_t, uint32_t)’: CCIDReader.cpp:3389:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 3389 | UNREFERENCED_PARAMETER(Count); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp:3390:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 3390 | UNREFERENCED_PARAMETER(ModuleID); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ CCIDReader.cpp: In member function ‘virtual void CCCIDReader::CompressModifyStructure(CCID_Message&)’: CCIDReader.cpp:3397:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 3397 | UNREFERENCED_PARAMETER(Message); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c EC30Reader.cpp -fPIC -DPIC -o .libs/EC30Reader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECAReader.lo ECAReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECBReader.lo ECBReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECAReader.cpp -fPIC -DPIC -o .libs/ECAReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECBReader.cpp -fPIC -DPIC -o .libs/ECBReader.o EC30Reader.cpp: In member function ‘virtual CJ_RESULT CEC30Reader::CtKeyUpdate(uint8_t*, uint32_t, uint32_t*)’: EC30Reader.cpp:781:76: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 781 | eaderInfo.Keys[0].KNr && 0xff==m_ReaderInfo.Keys[0].Version && KV[NewKey[8]]==NewKey[9] || 0xff==m_ReaderInfo.Keys[1].KNr && 0xff==m_ReaderInfo.Keys[1].Version && KV[NewKey[8]]==NewKey[9]) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp:818:46: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 818 | if(NewKey[8]==m_ReaderInfo.Keys[0].KNr && NewKey[9]>m_ReaderInfo.Keys[0].Version | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp:821:42: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 821 | if(ptr[6]==m_ReaderInfo.Keys[0].KNr && ptr[7]==m_ReaderInfo.Keys[0].Version || | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp: In member function ‘bool CEC30Reader::_CtIsKeyUpdateRecommended(uint8_t*, uint32_t, uint32_t*, uint8_t*, CJ_RESULT&)’: EC30Reader.cpp:941:39: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 941 | if(ptr[8]==m_ReaderInfo.Keys[0].KNr && ptr[9]>m_ReaderInfo.Keys[0].Version || ptr[8]==m_ReaderInfo.Keys[1].KNr && ptr[9]>m_ReaderInfo.Keys[1].Version) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp:946:75: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 946 | eaderInfo.Keys[0].KNr && 0xff==m_ReaderInfo.Keys[0].Version && KV[ptr[8]]==0 || 0xff==m_ReaderInfo.Keys[1].KNr && 0xff==m_ReaderInfo.Keys[1].Version && KV[ptr[8]]==0) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ EC30Reader.cpp:959:36: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 959 | if(ptr[14+help1]!=0x82 || IsRoot && 16+help1+help2!=help || !IsRoot && help < 29 + help1 + help2 || help2<1) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp:959:71: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 959 | 4+help1]!=0x82 || IsRoot && 16+help1+help2!=help || !IsRoot && help < 29 + help1 + help2 || help2<1) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from EC30Reader.cpp:1: EC30Reader.cpp: In member function ‘virtual bool CEC30Reader::ATRFilter(bool, uint8_t)’: EC30Reader.cpp:1008:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1008 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ EC30Reader.cpp: In member function ‘virtual RSCT_IFD_RESULT CEC30Reader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: EC30Reader.cpp:1443:25: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 1443 | if(*response_len>=7 && GetReadersInputBufferSize()<=99999 || *response_len>=6 && GetReadersInputBufferSize()<=9999) | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp: In member function ‘virtual CJ_RESULT CEC30Reader::SpecialLess3_0_41()’: EC30Reader.cpp:1722:47: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 1722 | if(Info->Version<0x30 || Info->Version==0x30 && Info->Revision<=40) | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp: In member function ‘virtual int CEC30Reader::ExecuteSecureResult(CCID_Response*, uint8_t*, int*, int)’: EC30Reader.cpp:2074:47: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 2074 | if(Info->Version<0x30 || Info->Version==0x30 && Info->Revision<=40) | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp: In member function ‘virtual bool CEC30Reader::HastModulestoreInfo()’: EC30Reader.cpp:2127:52: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 2127 | return (Info->Version>0x30 || Info->Version==0x30 && Info->Revision>=43); | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ EC30Reader.cpp: In member function ‘virtual CJ_RESULT CEC30Reader::CtGetModulestoreInfo(uint8_t*, uint8_t*)’: EC30Reader.cpp:2152:72: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 2152 | _SUCCESS || Res==CJ_ERR_RBUFFER_TO_SMALL && StoreInfo==NULL && InfoLength!=NULL) | ^ In file included from ECAReader.cpp:1: ECAReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECAReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: ECAReader.cpp:71:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 71 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECFReader.lo ECFReader.cpp EC30Reader.cpp: In member function ‘virtual CJ_RESULT CEC30Reader::CtSelfTest()’: EC30Reader.cpp:1118:57: warning: ‘%02d’ directive writing between 2 and 11 bytes into a region of size between 0 and 8 []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wformat-overflow=-Wformat-overflow=]8;;] 1118 | sprintf((char *)DateTime.dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~ EC30Reader.cpp:1118:51: note: directive argument in the range [-2147483647, 2147483647] 1118 | sprintf((char *)DateTime.dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~~~~~~~~~~~~~ EC30Reader.cpp:1118:51: note: directive argument in the range [-2147481748, 2147483647] In file included from /usr/include/stdio.h:867, from ../include/driver/Platform_unix.h:36, from ../include/driver/Platform.h:35, from EC30Reader.cpp:1: /usr/include/bits/stdio2.h:36:34: note: ‘__builtin___sprintf_chk’ output between 11 and 36 bytes into a destination of size 11 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECPReader.lo ECPReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECFReader.cpp -fPIC -DPIC -o .libs/ECFReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECPReader.cpp -fPIC -DPIC -o .libs/ECPReader.o EC30Reader.cpp: In member function ‘virtual void CEC30Reader::SetDate(uint8_t)’: EC30Reader.cpp:500:55: warning: ‘%02d’ directive writing between 2 and 11 bytes into a region of size between 0 and 8 []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wformat-overflow=-Wformat-overflow=]8;;] 500 | sprintf((char *)DateTime.dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~ EC30Reader.cpp:500:49: note: directive argument in the range [-2147483647, 2147483647] 500 | sprintf((char *)DateTime.dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~~~~~~~~~~~~~ EC30Reader.cpp:500:49: note: directive argument in the range [-2147481748, 2147483647] In file included from /usr/include/stdio.h:867, from ../include/driver/Platform_unix.h:36, from ../include/driver/Platform.h:35, from EC30Reader.cpp:1: /usr/include/bits/stdio2.h:36:34: note: ‘__builtin___sprintf_chk’ output between 11 and 36 bytes into a destination of size 11 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECRReader.lo ECRReader.cpp In file included from /usr/include/string.h:495, from ../include/driver/Platform_unix.h:40, from ../include/driver/Platform.h:35, from EC30Reader.cpp:1: In function ‘char* strcat(char*, const char*)’, inlined from ‘virtual CJ_RESULT CEC30Reader::BuildReaderInfo()’ at EC30Reader.cpp:325:8: /usr/include/bits/string_fortified.h:128:33: warning: ‘char* __builtin___strcat_chk(char*, const char*, long unsigned int)’ accessing 267 or more bytes at offsets 644 and 378 may overlap 1 byte at offset 644 []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wrestrict-Wrestrict]8;;] 128 | return __builtin___strcat_chk (__dest, __src, __bos (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECRReader.cpp -fPIC -DPIC -o .libs/ECRReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ECMReader.lo ECMReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o EFBReader.lo EFBReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ECMReader.cpp -fPIC -DPIC -o .libs/ECMReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o PPAReader.lo PPAReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c EFBReader.cpp -fPIC -DPIC -o .libs/EFBReader.o ECRReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECRReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: ECRReader.cpp:38:28: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 38 | if(Result==STATUS_SUCCESS && Mode==SCARD_COLD_RESET || Mode==SCARD_WARM_RESET) ECRReader.cpp: In member function ‘virtual uint32_t CECRReader::GetReadersInputBufferSize()’: ECRReader.cpp:172:63: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 172 | f(Info!=NULL && (Info->Version>=0x30 || Info->Version==0x30 && Info->Revision>=70)) | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ ECRReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECRReader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: ECRReader.cpp:269:25: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 269 | if(*response_len>=7 && GetReadersInputBufferSize()<=99999 || *response_len>=6 && GetReadersInputBufferSize()<=9999) | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c PPAReader.cpp -fPIC -DPIC -o .libs/PPAReader.o PPAReader.cpp:50: warning: ignoring ‘#pragma warning ’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunknown-pragmas-Wunknown-pragmas]8;;] 50 | #pragma warning (disable:4366) | In file included from ECMReader.cpp:1: ECMReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECMReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: ECMReader.cpp:24:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 24 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ ECMReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECMReader::IfdSetProtocol(uint32_t*, uint8_t)’: ECMReader.cpp:31:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 31 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ ECMReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CECMReader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: ECMReader.cpp:38:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 38 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RSCTCriticalSection.lo RSCTCriticalSection.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ONEReader.lo ONEReader.cpp In file included from PPAReader.cpp:26: PPAReader.cpp: In member function ‘virtual CJ_RESULT CPPAReader::SetSyncParameters(uint8_t, uint16_t, uint8_t)’: PPAReader.cpp:88:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 88 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:89:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 89 | UNREFERENCED_PARAMETER(PageSize); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:90:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 90 | UNREFERENCED_PARAMETER(AddrByteCount); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp: In member function ‘virtual void CPPAReader::SetDate(uint8_t)’: PPAReader.cpp:174:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 174 | UNREFERENCED_PARAMETER(Nr); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp: In member function ‘virtual CJ_RESULT CPPAReader::cjInput(uint8_t*, uint8_t, uint8_t*, int)’: PPAReader.cpp:182:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 182 | UNREFERENCED_PARAMETER(tag52len); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:183:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 183 | UNREFERENCED_PARAMETER(tag52); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:184:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 184 | UNREFERENCED_PARAMETER(timeout); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:185:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 185 | UNREFERENCED_PARAMETER(key); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp: In member function ‘RSCT_IFD_RESULT CPPAReader::ccidTransmit(uint8_t, const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint16_t, uint8_t)’: PPAReader.cpp:195:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 195 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp: In member function ‘RSCT_IFD_RESULT CPPAReader::APDU2TPDU_T1(uint16_t, const uint8_t*, uint16_t*, uint8_t*)’: PPAReader.cpp:350:32: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 350 | (rbuffer[1]&0xc0)==0x80 && (rbuffer[2]!=0 || (rbuffer[1]&0x20)==0x20) || //Unsinniger R-Block | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PPAReader.cpp:352:32: warning: suggest parentheses around ‘&&’ within ‘||’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wparentheses-Wparentheses]8;;] 352 | (rbuffer[1]&0xe0)==0xc0 && | ~~~~~~~~~~~~~~~~~~~~~~~~^~ 353 | ((((rbuffer[1]& 0x1f)==0 || (rbuffer[1]& 0x1f)==2) && rbuffer[2]!=0) || | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 354 | ((rbuffer[1]& 0x1f)==1 && (rbuffer[2]!=1 || rbuffer[3]<0x10 || rbuffer[3]==255)) || | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 355 | ((rbuffer[1]& 0x1f)==3 && rbuffer[2]!=1) || | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 356 | (rbuffer[1]& 0x1f)>3 )) | ~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RFKReader.lo RFKReader.cpp In file included from PPAReader.cpp:26: PPAReader.cpp: In member function ‘virtual int CPPAReader::cjccid_SecurePV(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t*, uint8_t*, int, uint8_t*, int*, uint8_t*, uint8_t, uint8_t, uint8_t, uint8_t)’: PPAReader.cpp:1255:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1255 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1256:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1256 | UNREFERENCED_PARAMETER(Textlen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1257:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1257 | UNREFERENCED_PARAMETER(Text); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1258:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1258 | UNREFERENCED_PARAMETER(Prologue); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp: In member function ‘virtual int CPPAReader::cjccid_SecureMV(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t*, uint8_t, uint8_t, uint8_t*, int, uint8_t*, int*, int, uint8_t**, uint8_t*, uint8_t*, uint8_t, uint8_t*, uint8_t)’: PPAReader.cpp:1333:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1333 | UNREFERENCED_PARAMETER(pDiversifier); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1334:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1334 | UNREFERENCED_PARAMETER(Textlen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1335:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1335 | UNREFERENCED_PARAMETER(Text); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1336:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1336 | UNREFERENCED_PARAMETER(TextCount); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ PPAReader.cpp:1337:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 1337 | UNREFERENCED_PARAMETER(Prologue); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RSCTCriticalSection.cpp -fPIC -DPIC -o .libs/RSCTCriticalSection.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ONEReader.cpp -fPIC -DPIC -o .libs/ONEReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RFKReader.cpp -fPIC -DPIC -o .libs/RFKReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RFSReader.lo RFSReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RFSReader.cpp -fPIC -DPIC -o .libs/RFSReader.o In file included from /usr/include/string.h:495, from ../include/driver/Platform_unix.h:40, from ../include/driver/Platform.h:35, from PPAReader.cpp:26: In function ‘char* strcat(char*, const char*)’, inlined from ‘virtual CJ_RESULT CPPAReader::BuildReaderInfo()’ at PPAReader.cpp:137:9: /usr/include/bits/string_fortified.h:128:33: warning: ‘char* __builtin___strcat_chk(char*, const char*, long unsigned int)’ accessing 267 or more bytes at offsets 644 and 378 may overlap 1 byte at offset 644 []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wrestrict-Wrestrict]8;;] 128 | return __builtin___strcat_chk (__dest, __src, __bos (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ RFKReader.cpp: In member function ‘virtual CJ_RESULT CRFKReader::CtSelfTest2(const uint8_t*, uint8_t)’: RFKReader.cpp:83:58: warning: ‘%02d’ directive writing between 2 and 11 bytes into a region of size between 0 and 8 []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wformat-overflow=-Wformat-overflow=]8;;] 83 | sprintf((char *)DateTime->dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~ RFKReader.cpp:83:52: note: directive argument in the range [-2147483647, 2147483647] 83 | sprintf((char *)DateTime->dtDate.ProductionDate,"%02d.%02d.%04d",t->tm_mday,t->tm_mon+1,t->tm_year+1900); | ^~~~~~~~~~~~~~~~ RFKReader.cpp:83:52: note: directive argument in the range [-2147481748, 2147483647] In file included from /usr/include/stdio.h:867, from ../include/driver/Platform_unix.h:36, from ../include/driver/Platform.h:35, from RFKReader.cpp:1: /usr/include/bits/stdio2.h:36:34: note: ‘__builtin___sprintf_chk’ output between 11 and 36 bytes into a destination of size 11 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RFSoliReader.lo RFSoliReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RFCReader.lo RFCReader.cpp RFSReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CRFSReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: RFSReader.cpp:50:11: warning: variable ‘OrginalATR_Length’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 50 | uint32_t OrginalATR_Length=0; | ^~~~~~~~~~~~~~~~~ RFSReader.cpp: In member function ‘virtual uint32_t CRFSReader::GetReadersInputBufferSize()’: RFSReader.cpp:112:17: warning: variable ‘Info’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 112 | cj_ModuleInfo *Info; | ^~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o CPTReader.lo CPTReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RFSoliReader.cpp -fPIC -DPIC -o .libs/RFSoliReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RFCReader.cpp -fPIC -DPIC -o .libs/RFCReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c CPTReader.cpp -fPIC -DPIC -o .libs/CPTReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o CGOReader.lo CGOReader.cpp In file included from RFSoliReader.cpp:1: RFSoliReader.cpp: In member function ‘virtual CJ_RESULT CRFSoliReader::CtSetMFT(const uint8_t*, uint32_t, uint32_t*)’: RFSoliReader.cpp:213:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 213 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFSoliReader.cpp:214:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 214 | UNREFERENCED_PARAMETER(DataLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFSoliReader.cpp:215:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 215 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFSoliReader.cpp: In member function ‘virtual CJ_RESULT CRFSoliReader::CtGetMFT(cj_MFT_Info*, uint32_t*)’: RFSoliReader.cpp:223:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 223 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c CGOReader.cpp -fPIC -DPIC -o .libs/CGOReader.o In file included from RFCReader.cpp:1: RFCReader.cpp: In member function ‘virtual CJ_RESULT CRFCReader::CtSetMFT(const uint8_t*, uint32_t, uint32_t*)’: RFCReader.cpp:63:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 63 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFCReader.cpp:64:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 64 | UNREFERENCED_PARAMETER(DataLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFCReader.cpp:65:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 65 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFCReader.cpp: In member function ‘virtual CJ_RESULT CRFCReader::CtGetMFT(cj_MFT_Info*, uint32_t*)’: RFCReader.cpp:73:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 73 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o WAVReader.lo WAVReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o Reader.lo Reader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o USBUnix.lo USBUnix.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c WAVReader.cpp -fPIC -DPIC -o .libs/WAVReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c Reader.cpp -fPIC -DPIC -o .libs/Reader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c USBUnix.cpp -fPIC -DPIC -o .libs/USBUnix.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o SerialUnix.lo SerialUnix.cpp In file included from WAVReader.cpp:1: WAVReader.cpp: In member function ‘virtual CJ_RESULT CWAVReader::CtSetBacklight(EBacklight, uint32_t*)’: WAVReader.cpp:65:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 65 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ WAVReader.cpp: In member function ‘virtual CJ_RESULT CWAVReader::CtSetMFT(const uint8_t*, uint32_t, uint32_t*)’: WAVReader.cpp:162:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 162 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ WAVReader.cpp:163:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 163 | UNREFERENCED_PARAMETER(DataLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ WAVReader.cpp:164:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 164 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ WAVReader.cpp: In member function ‘virtual CJ_RESULT CWAVReader::CtGetMFT(cj_MFT_Info*, uint32_t*)’: WAVReader.cpp:172:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 172 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c SerialUnix.cpp -fPIC -DPIC -o .libs/SerialUnix.o USBUnix.cpp: In member function ‘virtual int CUSBUnix::Open()’: USBUnix.cpp:259:7: warning: variable ‘nConfig’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 259 | int nConfig=0; | ^~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o SECReader.lo SECReader.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o SYOReader.lo SYOReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c SECReader.cpp -fPIC -DPIC -o .libs/SECReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c SYOReader.cpp -fPIC -DPIC -o .libs/SYOReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o TLSReader.lo TLSReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c TLSReader.cpp -fPIC -DPIC -o .libs/TLSReader.o In file included from SECReader.cpp:1: SECReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CSECReader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: SECReader.cpp:71:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 71 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o BDRReader.lo BDRReader.cpp In file included from SYOReader.cpp:1: SYOReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CSYOReader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: SYOReader.cpp:68:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 68 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o SHUReader.lo SHUReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c BDRReader.cpp -fPIC -DPIC -o .libs/BDRReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o SISReader.lo SISReader.cpp In file included from TLSReader.cpp:1: TLSReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CTLSReader::_IfdTransmit(const uint8_t*, uint16_t, uint8_t*, uint16_t*, uint8_t)’: TLSReader.cpp:68:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 68 | UNREFERENCED_PARAMETER(Slot); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c SHUReader.cpp -fPIC -DPIC -o .libs/SHUReader.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c SISReader.cpp -fPIC -DPIC -o .libs/SISReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o RFUReader.lo RFUReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c RFUReader.cpp -fPIC -DPIC -o .libs/RFUReader.o SHUReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CSHUReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: SHUReader.cpp:49:11: warning: variable ‘OrginalATR_Length’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 49 | uint32_t OrginalATR_Length=0; | ^~~~~~~~~~~~~~~~~ SHUReader.cpp: In member function ‘virtual uint32_t CSHUReader::GetReadersInputBufferSize()’: SHUReader.cpp:111:17: warning: variable ‘Info’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 111 | cj_ModuleInfo *Info; | ^~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o KPLReader.lo KPLReader.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c KPLReader.cpp -fPIC -DPIC -o .libs/KPLReader.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o cjeca32.lo cjeca32.cpp In file included from RFUReader.cpp:1: RFUReader.cpp: In member function ‘virtual CJ_RESULT CRFUReader::CtSetMFT(const uint8_t*, uint32_t, uint32_t*)’: RFUReader.cpp:100:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 100 | UNREFERENCED_PARAMETER(Result); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFUReader.cpp:101:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 101 | UNREFERENCED_PARAMETER(DataLen); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFUReader.cpp:102:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 102 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ RFUReader.cpp: In member function ‘virtual CJ_RESULT CRFUReader::CtGetMFT(cj_MFT_Info*, uint32_t*)’: RFUReader.cpp:110:25: warning: statement has no effect []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-value-Wunused-value]8;;] 110 | UNREFERENCED_PARAMETER(pData); ../include/driver/Platform.h:54:45: note: in definition of macro ‘UNREFERENCED_PARAMETER’ 54 | #define UNREFERENCED_PARAMETER(P) (P) | ^ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o Platform_unix.lo Platform_unix.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c cjeca32.cpp -fPIC -DPIC -o .libs/cjeca32.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o config.lo config.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c Platform_unix.cpp -fPIC -DPIC -o .libs/Platform_unix.o KPLReader.cpp: In member function ‘virtual RSCT_IFD_RESULT CKPLReader::_IfdPower(uint32_t, uint8_t*, uint32_t*, uint32_t, uint8_t)’: KPLReader.cpp:89:11: warning: variable ‘OrginalATR_Length’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 89 | uint32_t OrginalATR_Length = 0; | ^~~~~~~~~~~~~~~~~ KPLReader.cpp: In member function ‘virtual uint32_t CKPLReader::GetReadersInputBufferSize()’: KPLReader.cpp:151:17: warning: variable ‘Info’ set but not used []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wunused-but-set-variable-Wunused-but-set-variable]8;;] 151 | cj_ModuleInfo *Info; | ^~~~ libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -Iausb -I/usr/include/PCSC -pthread -DBUILDING_CYBERJACK -DCYBERJACK_CONFIG_FILE=\"/etc/cyberjack/cyberjack.conf\" -O2 -pipe -march=native -frecord-gcc-switches -Wall -c config.cpp -fPIC -DPIC -o .libs/config.o /bin/sh ../libtool --tag=CXX --mode=link x86_64-pc-linux-gnu-g++ -O2 -pipe -march=native -frecord-gcc-switches -Wall -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 -o libeca.la BaseCommunication.lo BaseReader.lo BaseTranslater.lo CCIDReader.lo Debug.lo EC30Reader.lo ECAReader.lo ECBReader.lo ECFReader.lo ECPReader.lo ECRReader.lo ECMReader.lo EFBReader.lo PPAReader.lo RSCTCriticalSection.lo ONEReader.lo RFKReader.lo RFSReader.lo RFSoliReader.lo RFCReader.lo CPTReader.lo CGOReader.lo WAVReader.lo Reader.lo USBUnix.lo SerialUnix.lo SECReader.lo SYOReader.lo TLSReader.lo BDRReader.lo SHUReader.lo SISReader.lo RFUReader.lo KPLReader.lo cjeca32.lo Platform_unix.lo config.lo ausb/libausb.la libtool: link: (cd .libs/libeca.lax/libausb.a && x86_64-pc-linux-gnu-ar x "/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32/ausb/.libs/libausb.a") libtool: link: x86_64-pc-linux-gnu-ar cru .libs/libeca.a .libs/BaseCommunication.o .libs/BaseReader.o .libs/BaseTranslater.o .libs/CCIDReader.o .libs/Debug.o .libs/EC30Reader.o .libs/ECAReader.o .libs/ECBReader.o .libs/ECFReader.o .libs/ECPReader.o .libs/ECRReader.o .libs/ECMReader.o .libs/EFBReader.o .libs/PPAReader.o .libs/RSCTCriticalSection.o .libs/ONEReader.o .libs/RFKReader.o .libs/RFSReader.o .libs/RFSoliReader.o .libs/RFCReader.o .libs/CPTReader.o .libs/CGOReader.o .libs/WAVReader.o .libs/Reader.o .libs/USBUnix.o .libs/SerialUnix.o .libs/SECReader.o .libs/SYOReader.o .libs/TLSReader.o .libs/BDRReader.o .libs/SHUReader.o .libs/SISReader.o .libs/RFUReader.o .libs/KPLReader.o .libs/cjeca32.o .libs/Platform_unix.o .libs/config.o .libs/libeca.lax/libausb.a/ausb.o .libs/libeca.lax/libausb.a/ausb1.o .libs/libeca.lax/libausb.a/ausb11.o .libs/libeca.lax/libausb.a/ausb3.o .libs/libeca.lax/libausb.a/ausb31.o .libs/libeca.lax/libausb.a/ausb_libusb0.o .libs/libeca.lax/libausb.a/ausb_libusb1.o .libs/libeca.lax/libausb.a/usbdev.o libtool: link: x86_64-pc-linux-gnu-ranlib .libs/libeca.a libtool: link: rm -fr .libs/libeca.lax libtool: link: ( cd ".libs" && rm -f "libeca.la" && ln -s "../libeca.la" "libeca.la" ) make[3]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32' make[2]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/cjeca32' Making all in etc make[2]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/etc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/etc' Making all in ifd make[2]: Entering directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/ifd' /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -I.. -I../cjeca32 -I.. -I../cjeca32/ausb -I/usr/include/PCSC -pthread -O2 -pipe -march=native -frecord-gcc-switches -Wall -c -o ifd.lo ifd.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I../include -I../include/driver -I../include/firmware -I.. -I../cjeca32 -I.. -I../cjeca32/ausb -I/usr/include/PCSC -pthread -O2 -pipe -march=native -frecord-gcc-switches -Wall -c ifd.cpp -fPIC -DPIC -o .libs/ifd.o In file included from ../include/driver/Platform_unix.h:122, from ../include/driver/Platform.h:35, from ifd.h:9, from ifd.cpp:8: ifd.cpp: In member function ‘RESPONSECODE IFDHandler::powerICC(DWORD, DWORD, PUCHAR, PDWORD)’: ../cjeca32/ntstatus.h:5019:64: error: narrowing conversion of ‘3221225848’ from ‘uint32_t’ {aka ‘unsigned int’} to ‘int’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wnarrowing-Wnarrowing]8;;] 5019 | #define STATUS_NO_MEDIA ((NTSTATUS)0xC0000178L) | ^ ifd.cpp:967:8: note: in expansion of macro ‘STATUS_NO_MEDIA’ 967 | case STATUS_NO_MEDIA: | ^~~~~~~~~~~~~~~ ../cjeca32/ntstatus.h:1729:64: error: narrowing conversion of ‘3221225492’ from ‘uint32_t’ {aka ‘unsigned int’} to ‘int’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wnarrowing-Wnarrowing]8;;] 1729 | #define STATUS_UNRECOGNIZED_MEDIA ((NTSTATUS)0xC0000014L) | ^ ifd.cpp:972:8: note: in expansion of macro ‘STATUS_UNRECOGNIZED_MEDIA’ 972 | case STATUS_UNRECOGNIZED_MEDIA: | ^~~~~~~~~~~~~~~~~~~~~~~~~ ../cjeca32/ntstatus.h:4214:64: error: narrowing conversion of ‘3221225760’ from ‘uint32_t’ {aka ‘unsigned int’} to ‘int’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wnarrowing-Wnarrowing]8;;] 4214 | #define STATUS_CANCELLED ((NTSTATUS)0xC0000120L) | ^ ifd.cpp:977:8: note: in expansion of macro ‘STATUS_CANCELLED’ 977 | case STATUS_CANCELLED: | ^~~~~~~~~~~~~~~~ ../cjeca32/ntstatus.h:3218:64: error: narrowing conversion of ‘3221225653’ from ‘uint32_t’ {aka ‘unsigned int’} to ‘int’ []8;;https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wnarrowing-Wnarrowing]8;;] 3218 | #define STATUS_IO_TIMEOUT ((NTSTATUS)0xC00000B5L) | ^ ifd.cpp:982:8: note: in expansion of macro ‘STATUS_IO_TIMEOUT’ 982 | case STATUS_IO_TIMEOUT: | ^~~~~~~~~~~~~~~~~ make[2]: *** [Makefile:576: ifd.lo] Error 1 make[2]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13/ifd' make[1]: *** [Makefile:492: all-recursive] Error 1 make[1]: Leaving directory '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13' make: *** [Makefile:422: all] Error 2 * ERROR: dev-libs/cyberjack-3.99.5_p13::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=dev-libs/cyberjack-3.99.5_p13::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-libs/cyberjack-3.99.5_p13::gentoo'`. * The complete build log is located at '/var/log/emerge-log/build/dev-libs/cyberjack-3.99.5_p13:20200514-035223.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/temp/environment'. * Working directory: '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13' * S: '/var/tmp/portage/dev-libs/cyberjack-3.99.5_p13/work/pcsc-cyberjack-3.99.5final.SP13' emerge --info: Portage 2.3.99 (python 3.7.7-final-0, default/linux/amd64/17.1, gcc-10.1.0, glibc-2.31-r3, 5.4.0-1009-aws x86_64) ================================================================= System uname: Linux-5.4.0-1009-aws-x86_64-AMD_EPYC_7571-with-gentoo-2.7 KiB Mem: 16011344 total, 6140456 free KiB Swap: 0 total, 0 free Timestamp of repository gentoo: Thu, 14 May 2020 07:35:24 +0000 sh bash 5.0_p17 ld GNU ld (Gentoo 2.34 p4) 2.34.0 app-shells/bash: 5.0_p17::gentoo dev-lang/perl: 5.30.2::gentoo dev-lang/python: 2.7.18::gentoo, 3.7.7-r2::gentoo, 3.8.2-r2::gentoo dev-util/cmake: 3.17.2::gentoo sys-apps/baselayout: 2.7::gentoo sys-apps/openrc: 0.42.1::gentoo sys-apps/sandbox: 2.18::gentoo sys-devel/autoconf: 2.69-r5::gentoo sys-devel/automake: 1.16.2::gentoo sys-devel/binutils: 2.34-r1::gentoo sys-devel/gcc: 10.1.0::gentoo sys-devel/gcc-config: 2.2.1::gentoo sys-devel/libtool: 2.4.6-r6::gentoo sys-devel/make: 4.3::gentoo sys-kernel/linux-headers: 5.6::gentoo (virtual/os-headers) sys-libs/glibc: 2.31-r3::gentoo Repositories: gentoo location: /usr/portage sync-type: rsync sync-uri: rsync://rsync.gentoo.org/gentoo-portage priority: -1000 sync-rsync-verify-jobs: 1 sync-rsync-extra-opts: sync-rsync-verify-metamanifest: yes sync-rsync-verify-max-age: 24 ACCEPT_KEYWORDS="amd64 ~amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CC="x86_64-pc-linux-gnu-gcc" CFLAGS="-O2 -pipe -march=native -frecord-gcc-switches" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXX="x86_64-pc-linux-gnu-g++" CXXFLAGS="-O2 -pipe -march=native -frecord-gcc-switches" DISTDIR="/usr/portage/distfiles" EMERGE_DEFAULT_OPTS="--with-bdeps=y --binpkg-respect-use=y -1 -b -k" ENV_UNSET="DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR" FCFLAGS="-O2 -pipe -march=native -frecord-gcc-switches" FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs buildpkg collision-protect config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms sign split-log strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr" FFLAGS="-O2 -pipe -march=native -frecord-gcc-switches" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="C.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0" MAKEOPTS="-j4" PKGDIR="/root/.packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git" PORTAGE_TMPDIR="/var/tmp" USE="acl amd64 berkdb bzip2 cli crypt dri fortran gdbm iconv ipv6 libtirpc multilib ncurses nls nptl openmp pam pcre readline seccomp split-usr ssl tcpd unicode xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_7" PYTHON_TARGETS="python2_7 python3_7" RUBY_TARGETS="ruby24 ruby25" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS