dmesg output from 2.6.13-rc3

dmsg.log (text/plain), 13.78 KB, created by David Lloyd on 2005-07-19 07:45:13 UTC

Linux version 2.6.13-rc3 (david@ultros) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Mon Jul 18 16:35:58 CDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
 BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
 BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 261936
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32560 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f9fb0
ACPI: XSDT (v001 A M I  OEMXSDT  0x04000322 MSFT 0x00000097) @ 0x3ff30100
ACPI: FADT (v003 A M I  OEMFACP  0x04000322 MSFT 0x00000097) @ 0x3ff30290
ACPI: MADT (v001 A M I  OEMAPIC  0x04000322 MSFT 0x00000097) @ 0x3ff30390
ACPI: OEMB (v001 A M I  OEMBIOS  0x04000322 MSFT 0x00000097) @ 0x3ff40040
ACPI: DSDT (v001  P4C81 P4C81053 0x00000053 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x030c 3 noirqdebug
IRQ lockup detection disabled
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2405.691 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 132x60
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035220k/1047744k available (1591k kernel code, 11732k reserved, 747k data, 144k init, 130240k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4820.14 BogoMIPS (lpj=9640291)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
    ACPI-0498: *** Warning: Encountered executable code at module level, [AE_NOT_CONFIGURED]
    ACPI-0498: *** Warning: Encountered executable code at module level, [AE_NOT_CONFIGURED]
    ACPI-0498: *** Warning: Encountered executable code at module level, [AE_NOT_CONFIGURED]
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f3d00000-f5dfffff
  PREFETCH window: dbc00000-ebbfffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: f5e00000-f7efffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14 <[e-mail]>
highmem bounce pool size: 64 pages
inotify syscall
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1])
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH5: chipset revision 2
ICH5: 100% native mode on irq 16
    ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD400JB-00ENA0, ATA DISK drive
ide0 at 0xefe0-0xefe7,0xefae on irq 16
Probing IDE interface ide1...
hdc: SONY CD-RW CRX220E1, ATAPI CD/DVD-ROM drive
ide1 at 0xefa0-0xefa7,0xefaa on irq 16
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2 hda3 hda4
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices: 
P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K ILAN PWRB 
ACPI: (supports S0 S1 S3 S4 S5)
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard on isa0060/serio0
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 144k freed
Adding 2008116k swap on /dev/hda2.  Priority:-1 extents:1
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
Uniform CD-ROM driver Revision: 3.20
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
SCSI subsystem initialized
libata version 1.11 loaded.
sata_promise version 1.01
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 17
ata1: SATA max UDMA/133 cmd 0xF89B0200 ctl 0xF89B0238 bmdma 0x0 irq 17
ata2: SATA max UDMA/133 cmd 0xF89B0280 ctl 0xF89B02B8 bmdma 0x0 irq 17
ata1: no device found (phy stat 00000000)
scsi0 : sata_promise
ata2: no device found (phy stat 00000000)
scsi1 : sata_promise
input: PC Speaker
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 18
cx88[0]: subsystem: 0000:0000, board: MSI TV-@nywhere [card=13,insmod option]
TV tuner 33 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom(cx88xx internal): Huh, no eeprom present (err=-121)?
cx88[0]/0: found at 0000:02:0a.0, rev: 3, irq: 18, latency: 64, mmio: 0xf6000000
 : chip found @ 0xc0 (cx88[0])
 : TEA5767 detected.
tuner 0-0060: TEA5767 detected.
tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 18
skge addr 0xf7ef8000 irq 18 chip Yukon rev 1
skge eth0: addr 00:0c:6e:3a:70:34
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000eec0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ef00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ef20
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ef40
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
usb 2-2: new low speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 01010001)
ehci_hcd 0000:00:1d.7: continuing after BIOS bug...
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xf7fff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 2-2: USB disconnect, address 2
Non-volatile memory driver v1.2
Real Time Clock Driver v1.12
hw_random hardware driver 1.0.0 loaded
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
usb 2-2: new low speed USB device using uhci_hcd and address 3
intel8x0_measure_ac97_clock: measured 44820 usecs
intel8x0: clocking to 48000
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1299 $ Ben Collins <[e-mail]>
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 22
PCI: Via IRQ fixup for 0000:02:03.0, from 11 to 6
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22]  MMIO=[f7eff800-f7efffff]  Max Packet=[2048]
sbp2: $Rev: 1306 $ Ben Collins <[e-mail]>
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800001cbb43]
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control none