net-vpn:ipsec-tools-0.8.2-r5:20200407-050230.log

net-vpn:ipsec-tools-0.8.2-r5:20200407-050230.log (text/plain), 29.06 KB, created by Toralf Förster on 2020-04-07 07:30:58 UTC

 * Package:    net-vpn/ipsec-tools-0.8.2-r5
 * Repository: musl
 * Maintainer: [e-mail]
 * USE:        abi_x86_64 amd64 elibc_musl ipv6 kernel_linux pam readline userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox userpriv usersandbox
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found sources for kernel version:
 *     5.5.13-gentoo
 * 
 * [1;33m**************************************************[00m
 * 
 * Checking kernel configuration in /usr/src/linux or
 * or /proc/config.gz for compatibility with ipsec-tools.
 * Here are the potential problems:
 * 
 * 
 * ALL IPSec may fail. CHECK:
 *  NET_KEY
 * 
 * IPv4 IPSec may fail. CHECK:
 *  INET_IPCOMP INET_AH INET_ESP INET_XFRM_MODE_TRANSPORT INET_XFRM_MODE_TUNNEL INET_XFRM_MODE_BEET
 * 
 * IPv6 IPSec may fail. CHECK:
 *  INET6_IPCOMP INET6_XFRM_MODE_TRANSPORT INET6_XFRM_MODE_TUNNEL INET6_XFRM_MODE_BEET
 * 
 * WARNING: If your *configured* and *running* kernel
 * differ either now or in the future, then these checks
 * may lead to misleading results.
 * 
 * [1;33m**************************************************[00m
 * 
>>> Unpacking source...
>>> Unpacking ipsec-tools-0.8.2.tar.bz2 to /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work
>>> Source unpacked in /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work
>>> Preparing source in /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 ...
 * Applying ipsec-tools-def-psk.patch ...
 [ ok ]
 * Applying ipsec-tools-include-vendoridh.patch ...
 [ ok ]
 * Applying ipsec-tools-0.8.0-sysctl.patch ...
 [ ok ]
 * Applying ipsec-tools-CVE-2015-4047.patch ...
 [ ok ]
 * Applying ipsec-tools-remove__P.patch ...
 [ ok ]
 * Applying ipsec-tools-remove_GLOB_TILDE.patch ...
 [ ok ]
 * Applying ipsec-tools-replace-strtouq.patch ...
 [ ok ]
 * Running eautoreconf in '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2' ...
 * Running libtoolize --install --copy --force --automake ...
 [ ok ]
 * Running aclocal -I /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 ...
 [ ok ]
 * Running autoconf -I /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 --force ...
 [ ok ]
 * Running autoheader -I /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 ...
 [ ok ]
 * Running automake --add-missing --copy --foreign --force-missing ...
 [ ok ]
 * Running elibtoolize in: ipsec-tools-0.8.2/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 ...
 * econf: updating ipsec-tools-0.8.2/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating ipsec-tools-0.8.2/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-gentoo-linux-musl --host=x86_64-gentoo-linux-musl --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/ipsec-tools-0.8.2-r5 --htmldir=/usr/share/doc/ipsec-tools-0.8.2-r5/html --libdir=/usr/lib --with-kernel-headers=/usr/include --enable-adminport --enable-dependency-tracking --enable-dpd --enable-frag --without-libiconv --without-libradius --disable-samode-unspec --disable-idea --enable-ipv6 --disable-gssapi --without-libldap --disable-natt --with-libpam --disable-rc5 --with-readline --disable-security-context --disable-stats --enable-hybrid
configure: loading site script /usr/share/config.site
checking for a BSD-compatible install... /usr/lib/portage/python3.6/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for x86_64-gentoo-linux-musl-gcc... x86_64-gentoo-linux-musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-gentoo-linux-musl-gcc accepts -g... yes
checking for x86_64-gentoo-linux-musl-gcc option to accept ISO C89... none needed
checking whether x86_64-gentoo-linux-musl-gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of x86_64-gentoo-linux-musl-gcc... gcc3
checking how to run the C preprocessor... x86_64-gentoo-linux-musl-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking build system type... x86_64-gentoo-linux-musl
checking host system type... x86_64-gentoo-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-gentoo-linux-musl-gcc... /usr/x86_64-gentoo-linux-musl/bin/ld
checking if the linker (/usr/x86_64-gentoo-linux-musl/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-gentoo-linux-musl-nm -B
checking the name lister (/usr/bin/x86_64-gentoo-linux-musl-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking how to convert x86_64-gentoo-linux-musl file names to x86_64-gentoo-linux-musl format... func_convert_file_noop
checking how to convert x86_64-gentoo-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/x86_64-gentoo-linux-musl/bin/ld option to reload object files... -r
checking for x86_64-gentoo-linux-musl-objdump... x86_64-gentoo-linux-musl-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-gentoo-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-gentoo-linux-musl-ar... x86_64-gentoo-linux-musl-ar
checking for archiver @FILE support... @
checking for x86_64-gentoo-linux-musl-strip... x86_64-gentoo-linux-musl-strip
checking for x86_64-gentoo-linux-musl-ranlib... x86_64-gentoo-linux-musl-ranlib
checking command to parse /usr/bin/x86_64-gentoo-linux-musl-nm -B output from x86_64-gentoo-linux-musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-gentoo-linux-musl-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-gentoo-linux-musl-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-gentoo-linux-musl-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-gentoo-linux-musl-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-gentoo-linux-musl-gcc static flag -static works... yes
checking if x86_64-gentoo-linux-musl-gcc supports -c -o file.o... yes
checking if x86_64-gentoo-linux-musl-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-gentoo-linux-musl-gcc linker (/usr/x86_64-gentoo-linux-musl/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking for bison... bison -y
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for egrep... (cached) /bin/grep -E
checking net/pfkeyv2.h usability... no
checking net/pfkeyv2.h presence... no
checking for net/pfkeyv2.h... no
checking netinet/ipsec.h usability... no
checking netinet/ipsec.h presence... no
checking for netinet/ipsec.h... no
checking netinet6/ipsec.h usability... no
checking netinet6/ipsec.h presence... no
checking for netinet6/ipsec.h... no
checking netipsec/ipsec.h usability... no
checking netipsec/ipsec.h presence... no
checking for netipsec/ipsec.h... no
checking /usr/include/linux/pfkeyv2.h usability... yes
checking /usr/include/linux/pfkeyv2.h presence... yes
checking for /usr/include/linux/pfkeyv2.h... yes
checking for struct sadb_x_policy.sadb_x_policy_priority... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking varargs.h usability... no
checking varargs.h presence... no
checking for varargs.h... no
checking shadow.h usability... yes
checking shadow.h presence... yes
checking for shadow.h... yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for working memcmp... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gettimeofday... yes
checking for select... no
checking for socket... yes
checking for strerror... yes
checking for strtol... yes
checking for strtoul... yes
checking for strlcpy... yes
checking for strlcat... yes
checking for strdup... yes
checking for an implementation of va_copy()... yes
checking if printf accepts %z... yes
checking if __func__ is available... yes
checking if readline support is requested... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking for readline in -lreadline... yes
checking if --with-flex option is specified... dirdefault
checking if --with-flexlib option is specified... default
checking if --with-openssl option is specified... default
checking openssl version... ok
checking openssl/engine.h usability... yes
checking openssl/engine.h presence... yes
checking for openssl/engine.h... yes
checking openssl/aes.h usability... yes
checking openssl/aes.h presence... yes
checking for openssl/aes.h... yes
checking sha2 support... yes
checking openssl/sha2.h usability... no
checking openssl/sha2.h presence... no
checking for openssl/sha2.h... no
checking if sha2 is defined in openssl/sha.h... yes
checking openssl/camellia.h usability... yes
checking openssl/camellia.h presence... yes
checking for openssl/camellia.h... yes
checking if --enable-adminport option is specified... yes
checking if --enable-rc5 option is specified... no
checking if --enable-idea option is specified... no
checking for crypto containing MD5_Init... -lcrypto
checking for util containing login... no
checking if --with-libiconv option is specified... no
checking if --enable-hybrid option is specified... yes
checking if --enable-frag option is specified... yes
checking if --with-libradius option is specified... no
checking if --with-libpam option is specified... yes
checking for pam containing pam_start... -lpam
checking for pam_start... yes
checking if --with-libldap option is specified... no
checking if --enable-gssapi option is specified... no
checking for krb5-config... /usr/bin/krb5-config
checking if --enable-stats option is specified... no
checking if --enable-dpd option is specified... yes
checking if --enable-samode-unspec option is specified... no
checking whether to enable ipv6... yes
checking for advanced API support... yes
checking getaddrinfo bug... good
checking kernel NAT-Traversal support... yes
checking whether to support NAT-T... no
checking which NAT-T versions to support... none
checking if --enable-broken-natt option is specified... no
checking whether we support FWD policy... yes
checking for ipsec_policy_t... no
checking kernel Security Context support... yes
checking selinux/selinux.h usability... yes
checking selinux/selinux.h presence... yes
checking for selinux/selinux.h... yes
checking for avc_init in -lselinux... yes
checking whether to support Security Context... no
checking for rt containing clock_gettime... none required
checking for monotonic system clock... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating package_version.h
config.status: creating src/Makefile
config.status: creating src/include-glibc/Makefile
config.status: creating src/libipsec/Makefile
config.status: creating src/setkey/Makefile
config.status: creating src/racoon/Makefile
config.status: creating src/racoon/samples/psk.txt
config.status: creating src/racoon/samples/racoon.conf
config.status: creating rpm/Makefile
config.status: creating rpm/suse/Makefile
config.status: creating rpm/suse/ipsec-tools.spec
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2 ...
make -j1 
make  all-recursive
make[1]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2'
Making all in src
make[2]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src'
Making all in include-glibc
make[3]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/include-glibc'
ln -snf /usr/include/linux
touch .includes
make[3]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/include-glibc'
Making all in libipsec
make[3]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/libipsec'
make  all-am
make[4]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/libipsec'
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT ipsec_dump_policy.lo -MD -MP -MF .deps/ipsec_dump_policy.Tpo -c -o ipsec_dump_policy.lo ipsec_dump_policy.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT ipsec_dump_policy.lo -MD -MP -MF .deps/ipsec_dump_policy.Tpo -c ipsec_dump_policy.c -o ipsec_dump_policy.o
ipsec_dump_policy.c: In function ‘set_address.constprop’:
ipsec_dump_policy.c:416:26: warning: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size between 0 and 254 [-Wformat-truncation=]
  416 |   snprintf(buf, len, "%s[%s]", host, serv);
      |                          ^~          ~~~~
ipsec_dump_policy.c:416:3: note: ‘snprintf’ output between 3 and 288 bytes into a destination of size 255
  416 |   snprintf(buf, len, "%s[%s]", host, serv);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mv -f .deps/ipsec_dump_policy.Tpo .deps/ipsec_dump_policy.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT ipsec_get_policylen.lo -MD -MP -MF .deps/ipsec_get_policylen.Tpo -c -o ipsec_get_policylen.lo ipsec_get_policylen.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT ipsec_get_policylen.lo -MD -MP -MF .deps/ipsec_get_policylen.Tpo -c ipsec_get_policylen.c -o ipsec_get_policylen.o
mv -f .deps/ipsec_get_policylen.Tpo .deps/ipsec_get_policylen.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT ipsec_strerror.lo -MD -MP -MF .deps/ipsec_strerror.Tpo -c -o ipsec_strerror.lo ipsec_strerror.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT ipsec_strerror.lo -MD -MP -MF .deps/ipsec_strerror.Tpo -c ipsec_strerror.c -o ipsec_strerror.o
mv -f .deps/ipsec_strerror.Tpo .deps/ipsec_strerror.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT key_debug.lo -MD -MP -MF .deps/key_debug.Tpo -c -o key_debug.lo key_debug.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT key_debug.lo -MD -MP -MF .deps/key_debug.Tpo -c key_debug.c -o key_debug.o
mv -f .deps/key_debug.Tpo .deps/key_debug.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT pfkey.lo -MD -MP -MF .deps/pfkey.Tpo -c -o pfkey.lo pfkey.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT pfkey.lo -MD -MP -MF .deps/pfkey.Tpo -c pfkey.c -o pfkey.o
mv -f .deps/pfkey.Tpo .deps/pfkey.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT pfkey_dump.lo -MD -MP -MF .deps/pfkey_dump.Tpo -c -o pfkey_dump.lo pfkey_dump.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT pfkey_dump.lo -MD -MP -MF .deps/pfkey_dump.Tpo -c pfkey_dump.c -o pfkey_dump.o
pfkey_dump.c: In function ‘str_prefport’:
pfkey_dump.c:734:32: warning: ‘%s’ directive output may be truncated writing up to 127 bytes into a region of size between 1 and 128 [-Wformat-truncation=]
  734 |  snprintf(buf, sizeof(buf), "%s%s", prefbuf, portbuf);
      |                                ^~            ~~~~~~~
pfkey_dump.c:734:2: note: ‘snprintf’ output between 1 and 255 bytes into a destination of size 128
  734 |  snprintf(buf, sizeof(buf), "%s%s", prefbuf, portbuf);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mv -f .deps/pfkey_dump.Tpo .deps/pfkey_dump.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT policy_parse.lo -MD -MP -MF .deps/policy_parse.Tpo -c -o policy_parse.lo policy_parse.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT policy_parse.lo -MD -MP -MF .deps/policy_parse.Tpo -c policy_parse.c -o policy_parse.o
mv -f .deps/policy_parse.Tpo .deps/policy_parse.Plo
/bin/sh ../../libtool  --tag=CC   --mode=compile x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT policy_token.lo -MD -MP -MF .deps/policy_token.Tpo -c -o policy_token.lo policy_token.c
libtool: compile:  x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc -I../../src/racoon/missing -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -MT policy_token.lo -MD -MP -MF .deps/policy_token.Tpo -c policy_token.c -o policy_token.o
mv -f .deps/policy_token.Tpo .deps/policy_token.Plo
/bin/sh ../../libtool  --tag=CC   --mode=link x86_64-gentoo-linux-musl-gcc -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -version-info 0:1:0 -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 -o libipsec.la -rpath /usr/lib ipsec_dump_policy.lo ipsec_get_policylen.lo ipsec_strerror.lo key_debug.lo pfkey.lo pfkey_dump.lo policy_parse.lo policy_token.lo -lfl -lpam -lcrypto  -lresolv -lreadline -lcrypt -lcrypt -L/lib -Wl,-R/lib -lpam
libtool: link: x86_64-gentoo-linux-musl-ar cru .libs/libipsec.a  ipsec_dump_policy.o ipsec_get_policylen.o ipsec_strerror.o key_debug.o pfkey.o pfkey_dump.o policy_parse.o policy_token.o
libtool: link: x86_64-gentoo-linux-musl-ranlib .libs/libipsec.a
libtool: link: ( cd ".libs" && rm -f "libipsec.la" && ln -s "../libipsec.la" "libipsec.la" )
make[4]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/libipsec'
make[3]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/libipsec'
Making all in setkey
make[3]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/setkey'
make  all-am
make[4]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/setkey'
x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -I../../src/libipsec -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT setkey.o -MD -MP -MF .deps/setkey.Tpo -c -o setkey.o setkey.c
mv -f .deps/setkey.Tpo .deps/setkey.Po
x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -I../../src/libipsec -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT parse.o -MD -MP -MF .deps/parse.Tpo -c -o parse.o parse.c
mv -f .deps/parse.Tpo .deps/parse.Po
x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../..   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -I../../src/libipsec -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused -MT token.o -MD -MP -MF .deps/token.Tpo -c -o token.o token.c
mv -f .deps/token.Tpo .deps/token.Po
/bin/sh ../../libtool  --tag=CC   --mode=link x86_64-gentoo-linux-musl-gcc -I../../src/libipsec -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native  -Wall  -Wno-unused ../libipsec/libipsec.la -Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0 -o setkey setkey.o parse.o token.o -lfl -lpam -lcrypto  -lresolv -lreadline -lcrypt -lcrypt -L/lib -Wl,-R/lib -lpam
libtool: link: x86_64-gentoo-linux-musl-gcc -I../../src/libipsec -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -O2 -pipe -march=native -Wall -Wno-unused -Wl,-O1 -Wl,--defsym=__gentoo_check_ldflags__=0 -o setkey setkey.o parse.o token.o -Wl,-R/lib  ../libipsec/.libs/libipsec.a -L/lib -Wl,--as-needed -lfl -lcrypto -lresolv -lreadline -lcrypt -lpam
make[4]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/setkey'
make[3]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/setkey'
Making all in racoon
make[3]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/racoon'
make  all-am
make[4]: Entering directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/racoon'
x86_64-gentoo-linux-musl-gcc -DHAVE_CONFIG_H -I. -I../.. -I./../libipsec   -D_GNU_SOURCE -include ./src/include-glibc/glibc-bugs.h -I./src/include-glibc -I./src/include-glibc  -I../../src/racoon/missing -D_GNU_SOURCE -include ../../src/include-glibc/glibc-bugs.h -I../../src/include-glibc -I../../src/include-glibc -DSYSCONFDIR=\"/etc\" -DADMINPORTDIR=\"/var/lib/racoon\" -O2 -pipe -march=native  -Wall  -Wno-unused -MT eaytest.o -MD -MP -MF .deps/eaytest.Tpo -c -o eaytest.o eaytest.c
eaytest.c: In function ‘rsa_verify_with_pubkey’:
eaytest.c:106:41: error: dereferencing pointer to incomplete type ‘EVP_PKEY’ {aka ‘struct evp_pkey_st’}
  106 |  error = eay_check_rsasign(src, sig, evp->pkey.rsa);
      |                                         ^~
make[4]: *** [Makefile:938: eaytest.o] Error 1
make[4]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/racoon'
make[3]: *** [Makefile:714: all] Error 2
make[3]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src/racoon'
make[2]: *** [Makefile:364: all-recursive] Error 1
make[2]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2/src'
make[1]: *** [Makefile:422: all-recursive] Error 1
make[1]: Leaving directory '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2'
make: *** [Makefile:348: all] Error 2
 * ERROR: net-vpn/ipsec-tools-0.8.2-r5::musl failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=net-vpn/ipsec-tools-0.8.2-r5::musl'`,
 * the complete build log and the output of `emerge -pqv '=net-vpn/ipsec-tools-0.8.2-r5::musl'`.
 * The complete build log is located at '/var/log/portage/net-vpn:ipsec-tools-0.8.2-r5:20200407-050230.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/temp/environment'.
 * Working directory: '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2'
 * S: '/var/tmp/portage/net-vpn/ipsec-tools-0.8.2-r5/work/ipsec-tools-0.8.2'