Linux version 2.6.11-gentoo-r5 (root@secundus) (gcc-Version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 Thu Apr 7 17:44:46 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f7550 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000) Built 1 zonelists Kernel command line: root=/dev/hda1 ide0=autotune ide1=autotune analog.map=gamep ad8 db9.dev=0,9 video=vesafb:ywrap,mtrr,1024x768-16@85 splash=verbose,theme:emer gence ide_setup: ide0=autotune -- OBSOLETE OPTION, WILL BE REMOVED SOON! ide_setup: ide1=autotune -- OBSOLETE OPTION, WILL BE REMOVED SOON! fbsplash: verbose fbsplash: theme emergence Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01402000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1537.607 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513780k/524224k available (2865k kernel code, 9844k reserved, 1070k data , 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3022.84 BogoMIPS (lpj=1511424) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 0 0000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 0000000 0 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 589k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. NET: Registered protocol family 23 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. inotify device minor=63 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xd0000000 [drm] Initialized drm 1.0.0 20040925 vesafb: NVIDIA Corporation, NV34 Board - p162-2nz, Chip Rev (OEM: NVIDIA) vesafb: VBE version: 3.0 vesafb: protected mode interface info at c000:f040 vesafb: pmi: set display start = c00cf076, set palette = c00cf0e0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: hardware supports DCC2 transfers vesafb: monitor limits: vf = 150 Hz, hf = 96 kHz, clk = 200 MHz vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536 Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'emergence' fbsplash: switched splash state to 'on' on console 0 vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 3072k, total 1310 72k fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (29 C) serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 db9.c: no such parport parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xe080e000, 00:c0:26:75:3f:c5, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: SAMSUNG SP1614N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:11.2: irq 10, io base 0xd800 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:11.3: irq 10, io base 0xdc00 uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new full speed USB device using uhci_hcd and address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x3104 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb 2-2: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.3 -2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver input: Analog 2-axis 8-button gamepad at isa0200/gameport0 [TSC timer, 1512 MHz clock, 1184 ns res] gameport: NS558 ISA at 0x201 size 8 speed 864 kHz Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA device list: #0: VIA 8233A with ALC650D at 0xe000, irq 5 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 IrCOMM protocol (Dag Brattli) ACPI wakeup devices: SLPB PCI0 USB0 USB1 USB2 UAR1 ECP1 ACPI: (supports S0 S1 S4 S5) ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 204k freed Adding 1004052k swap on /dev/hda3. Priority:-1 extents:1 ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 nfs warning: mount version older than kernel fbsplash: console 1 using theme 'emergence' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'emergence' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'emergence' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'emergence' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'emergence' fbsplash: switched splash state to 'on' on console 5 fbsplash: console 6 using theme 'emergence' fbsplash: switched splash state to 'on' on console 6 fbsplash: console 7 using theme 'emergence' fbsplash: switched splash state to 'on' on console 7 fbsplash: console 8 using theme 'emergence' fbsplash: switched splash state to 'on' on console 8 fbsplash: console 9 using theme 'emergence' fbsplash: switched splash state to 'on' on console 9 fbsplash: console 10 using theme 'emergence' fbsplash: switched splash state to 'on' on console 10 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44: 39 PST 2005 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode spurious 8259A interrupt: IRQ7.