[ 0.000000] Linux version 4.14.96-gentoo-debug (root@love) (gcc version 7.3.0 (Gentoo 7.3.0-r6 p1.8)) #1 SMP Fri Feb 1 18:18:45 CST 2019 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.96-gentoo-debug root=/dev/sde3 ro lpj=36999370 raid=noautodetect domdadm dolvm [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000da7a1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da7a2000-0x00000000dbca5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbca6000-0x00000000dbd9bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbd9c000-0x00000000dc178fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc179000-0x00000000dd166fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd167000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X470 Taichi Ultimate, BIOS P1.20 04/17/2018 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000820000000 aka 33280M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88cf00097000] 97000 size 24576 [ 0.000000] BRK [0x19dc31000, 0x19dc31fff] PGTABLE [ 0.000000] BRK [0x19dc32000, 0x19dc32fff] PGTABLE [ 0.000000] BRK [0x19dc33000, 0x19dc33fff] PGTABLE [ 0.000000] BRK [0x19dc34000, 0x19dc34fff] PGTABLE [ 0.000000] BRK [0x19dc35000, 0x19dc35fff] PGTABLE [ 0.000000] BRK [0x19dc36000, 0x19dc36fff] PGTABLE [ 0.000000] BRK [0x19dc37000, 0x19dc37fff] PGTABLE [ 0.000000] BRK [0x19dc38000, 0x19dc38fff] PGTABLE [ 0.000000] BRK [0x19dc39000, 0x19dc39fff] PGTABLE [ 0.000000] BRK [0x19dc3a000, 0x19dc3afff] PGTABLE [ 0.000000] BRK [0x19dc3b000, 0x19dc3bfff] PGTABLE [ 0.000000] BRK [0x19dc3c000, 0x19dc3cfff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DBD9C098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DBDA2CB0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170728/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DBD9C1E8 006AC4 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DC161E00 000040 [ 0.000000] ACPI: APIC 0x00000000DBDA2DC8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DBDA2EA8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DBDA2EF0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DBDA2F90 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000DBDABC28 002314 (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DBDADF40 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DBDAEE90 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DBDAEEC0 002C36 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DBDB1AF8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000DBDB1B38 0002EC (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DBDB1E28 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBDB1E60 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DBDB1E88 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000DBDB1ED0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DBDB1FA0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DBDB2098 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DBDB3AE0 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81f37c000-0x81f37ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000da7a1fff] [ 0.000000] node 0: [mem 0x00000000dbca6000-0x00000000dbd9bfff] [ 0.000000] node 0: [mem 0x00000000dd167000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.000000] On node 0 totalpages: 8369955 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14033 pages used for memmap [ 0.000000] DMA32 zone: 898055 pages, LIFO batch:31 [ 0.000000] Normal zone: 116686 pages used for memmap [ 0.000000] Normal zone: 7467904 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda7a2000-0xdbca5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbd9c000-0xdc178fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc179000-0xdd166fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x83/0x584 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 162 pages/cpu @ffff88d6f9a00000 s626248 r8192 d29112 u1048576 [ 0.000000] pcpu-alloc: s626248 r8192 d29112 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 [0] 02 03 [0] 04 05 [0] 06 07 [ 0.000000] pcpu-alloc: [0] 08 09 [0] 10 11 [0] 12 13 [0] 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8239151 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.96-gentoo-debug root=/dev/sde3 ro lpj=36999370 raid=noautodetect domdadm dolvm [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 32710856K/33479820K available (20492K kernel code, 13495K rwdata, 5328K rodata, 1828K init, 54536K bss, 768964K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU callback double-/use-after-free debug enabled. [ 0.000000] NR_IRQS: 4352, nr_irqs: 1096, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 7391 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] ODEBUG: selftest passed [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.002000] tsc: PIT calibration matches HPET. 1 loops [ 0.003000] tsc: Detected 3699.772 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 73998.74 BogoMIPS (lpj=36999370) [ 0.004003] pid_max: default: 32768 minimum: 301 [ 0.004126] ACPI: Core revision 20170728 [ 0.016811] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.016962] Security Framework initialized [ 0.024264] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.029105] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029418] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.029649] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.030212] mce: CPU supports 23 MCE banks [ 0.030343] LVT offset 1 assigned for vector 0xf9 [ 0.030514] LVT offset 2 assigned for vector 0xf4 [ 0.030636] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.030637] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.030751] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.030867] Spectre V2 : Mitigation: Full AMD retpoline [ 0.030979] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.031010] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.031183] Spectre V2 : User space: Vulnerable [ 0.031296] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.031534] debug: unmapping init [mem 0xffffffffb36e4000-0xffffffffb36ecfff] [ 0.033168] smpboot: Max logical packages: 2 [ 0.033285] Switched APIC routing to physical flat. [ 0.034634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.042000] smpboot: CPU0: AMD Ryzen 7 2700X Eight-Core Processor (family: 0x17, model: 0x8, stepping: 0x2) [ 0.042000] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.042000] ... version: 0 [ 0.042000] ... bit width: 48 [ 0.042000] ... generic registers: 6 [ 0.042000] ... value mask: 0000ffffffffffff [ 0.042000] ... max period: 00007fffffffffff [ 0.042002] ... fixed-purpose events: 0 [ 0.042113] ... event mask: 000000000000003f [ 0.042306] Hierarchical SRCU implementation. [ 0.042895] MCE: In-kernel MCE decoding enabled. [ 0.043287] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.043440] smp: Bringing up secondary CPUs ... [ 0.043764] x86: Booting SMP configuration: [ 0.043885] .... node #0, CPUs: #1 [ 0.001000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.045184] #2 [ 0.001000] numa_add_cpu cpu 2 node 0: mask now 0-2 [ 0.047155] #3 [ 0.001000] numa_add_cpu cpu 3 node 0: mask now 0-3 [ 0.048153] #4 [ 0.001000] numa_add_cpu cpu 4 node 0: mask now 0-4 [ 0.050148] #5 [ 0.001000] numa_add_cpu cpu 5 node 0: mask now 0-5 [ 0.051147] #6 [ 0.001000] numa_add_cpu cpu 6 node 0: mask now 0-6 [ 0.053144] #7 [ 0.001000] numa_add_cpu cpu 7 node 0: mask now 0-7 [ 0.054151] #8 [ 0.001000] numa_add_cpu cpu 8 node 0: mask now 0-8 [ 0.056146] #9 [ 0.001000] numa_add_cpu cpu 9 node 0: mask now 0-9 [ 0.057147] #10 [ 0.001000] numa_add_cpu cpu 10 node 0: mask now 0-10 [ 0.059143] #11 [ 0.001000] numa_add_cpu cpu 11 node 0: mask now 0-11 [ 0.060148] #12 [ 0.001000] numa_add_cpu cpu 12 node 0: mask now 0-12 [ 0.062143] #13 [ 0.001000] numa_add_cpu cpu 13 node 0: mask now 0-13 [ 0.063144] #14 [ 0.001000] numa_add_cpu cpu 14 node 0: mask now 0-14 [ 0.065158] #15 [ 0.001000] numa_add_cpu cpu 15 node 0: mask now 0-15 [ 0.066043] smp: Brought up 1 node, 16 CPUs [ 0.066223] smpboot: Total of 16 processors activated (1183979.84 BogoMIPS) [ 0.069334] devtmpfs: initialized [ 0.070042] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) [ 0.070217] PM: Registering ACPI NVS region [mem 0xdbd9c000-0xdc178fff] (4050944 bytes) [ 0.070782] kworker/u32:0 (106) used greatest stack depth: 12800 bytes left [ 0.071035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.071246] futex hash table entries: 4096 (order: 7, 524288 bytes) [ 0.071545] xor: automatically using best checksumming function avx [ 0.071666] pinctrl core: initialized pinctrl subsystem [ 0.072143] RTC time: 17:20:27, date: 04/23/19 [ 0.072434] NET: Registered protocol family 16 [ 0.073079] cpuidle: using governor menu [ 0.073171] ACPI: bus type PCI registered [ 0.073284] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.073467] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.074012] PCI: Using configuration type 1 for base access [ 0.074656] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.075003] mtrr: probably your BIOS does not setup all CPUs. [ 0.075118] mtrr: corrected configuration. [ 0.080230] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.080230] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.097822] raid6: sse2x1 gen() 9367 MB/s [ 0.114821] raid6: sse2x1 xor() 7414 MB/s [ 0.131821] raid6: sse2x2 gen() 16531 MB/s [ 0.148822] raid6: sse2x2 xor() 10685 MB/s [ 0.165821] raid6: sse2x4 gen() 17828 MB/s [ 0.182820] raid6: sse2x4 xor() 10281 MB/s [ 0.199820] raid6: avx2x1 gen() 21242 MB/s [ 0.216822] raid6: avx2x1 xor() 14519 MB/s [ 0.233820] raid6: avx2x2 gen() 28015 MB/s [ 0.250820] raid6: avx2x2 xor() 16386 MB/s [ 0.267820] raid6: avx2x4 gen() 29457 MB/s [ 0.284821] raid6: avx2x4 xor() 15609 MB/s [ 0.284932] raid6: using algorithm avx2x4 gen() 29457 MB/s [ 0.285001] raid6: .... xor() 15609 MB/s, rmw enabled [ 0.285113] raid6: using avx2x2 recovery algorithm [ 0.285404] ACPI: Added _OSI(Module Device) [ 0.285515] ACPI: Added _OSI(Processor Device) [ 0.285624] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.285735] ACPI: Added _OSI(Processor Aggregator Device) [ 0.286123] ACPI: Executed 2 blocks of module-level executable AML code [ 0.299249] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.303805] ACPI: Interpreter enabled [ 0.303940] ACPI: (supports S0 S3 S4 S5) [ 0.304006] ACPI: Using IOAPIC for interrupt routing [ 0.304665] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.305390] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.322323] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.322451] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.322992] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.323028] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.323535] PCI host bridge to bus 0000:00 [ 0.323648] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.323766] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.323882] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.324003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.324120] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.324291] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.324462] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.324634] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.324805] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.325021] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.325241] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.325398] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.325529] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.325675] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.325842] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.326019] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.326132] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.326704] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.326852] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.327020] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.327117] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.327625] pci 0000:00:07.1: enabling Extended Tags [ 0.327818] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.327963] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.328088] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.328636] pci 0000:00:08.1: enabling Extended Tags [ 0.328832] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.329012] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.329282] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.329558] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.329667] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.329776] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.329887] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.330018] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.330111] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.330223] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.330332] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.330694] pci 0000:03:00.0: [1022:43d0] type 00 class 0x0c0330 [ 0.330717] pci 0000:03:00.0: reg 0x10: [mem 0xfcfa0000-0xfcfa7fff 64bit] [ 0.330803] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.330895] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601 [ 0.330943] pci 0000:03:00.1: reg 0x24: [mem 0xfcf80000-0xfcf9ffff] [ 0.330951] pci 0000:03:00.1: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref] [ 0.330993] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 0.331079] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400 [ 0.331159] pci 0000:03:00.2: PME# supported from D3hot D3cold [ 0.334024] pci 0000:00:01.3: PCI bridge to [bus 03-2d] [ 0.334140] pci 0000:00:01.3: bridge window [io 0xd000-0xefff] [ 0.334142] pci 0000:00:01.3: bridge window [mem 0xfc400000-0xfcffffff] [ 0.334145] pci 0000:00:01.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.334202] pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400 [ 0.334295] pci 0000:1d:00.0: PME# supported from D3hot D3cold [ 0.334399] pci 0000:1d:02.0: [1022:43c7] type 01 class 0x060400 [ 0.334492] pci 0000:1d:02.0: PME# supported from D3hot D3cold [ 0.334594] pci 0000:1d:03.0: [1022:43c7] type 01 class 0x060400 [ 0.334685] pci 0000:1d:03.0: PME# supported from D3hot D3cold [ 0.334785] pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400 [ 0.334877] pci 0000:1d:04.0: PME# supported from D3hot D3cold [ 0.334982] pci 0000:1d:09.0: [1022:43c7] type 01 class 0x060400 [ 0.335077] pci 0000:1d:09.0: PME# supported from D3hot D3cold [ 0.335183] pci 0000:03:00.2: PCI bridge to [bus 1d-2d] [ 0.335301] pci 0000:03:00.2: bridge window [io 0xd000-0xefff] [ 0.335304] pci 0000:03:00.2: bridge window [mem 0xfc400000-0xfcefffff] [ 0.335309] pci 0000:03:00.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.335371] pci 0000:1e:00.0: [1b21:2142] type 00 class 0x0c0330 [ 0.335413] pci 0000:1e:00.0: reg 0x10: [mem 0xfce00000-0xfce07fff 64bit] [ 0.335564] pci 0000:1e:00.0: PME# supported from D0 [ 0.338024] pci 0000:1d:00.0: PCI bridge to [bus 1e] [ 0.338142] pci 0000:1d:00.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.338213] pci 0000:20:00.0: [1b21:0612] type 00 class 0x010601 [ 0.338242] pci 0000:20:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.338256] pci 0000:20:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.338268] pci 0000:20:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.338281] pci 0000:20:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.338293] pci 0000:20:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.338306] pci 0000:20:00.0: reg 0x24: [mem 0xfcd00000-0xfcd001ff] [ 0.341022] pci 0000:1d:02.0: PCI bridge to [bus 20] [ 0.341138] pci 0000:1d:02.0: bridge window [io 0xe000-0xefff] [ 0.341141] pci 0000:1d:02.0: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.341209] pci 0000:21:00.0: [1b21:1184] type 01 class 0x060400 [ 0.341359] pci 0000:21:00.0: PME# supported from D0 D3hot D3cold [ 0.344023] pci 0000:1d:03.0: PCI bridge to [bus 21-2b] [ 0.344142] pci 0000:1d:03.0: bridge window [io 0xd000-0xdfff] [ 0.344145] pci 0000:1d:03.0: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.344150] pci 0000:1d:03.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.344226] pci 0000:26:01.0: [1b21:1184] type 01 class 0x060400 [ 0.344377] pci 0000:26:01.0: PME# supported from D0 D3hot D3cold [ 0.344495] pci 0000:26:03.0: [1b21:1184] type 01 class 0x060400 [ 0.344644] pci 0000:26:03.0: PME# supported from D0 D3hot D3cold [ 0.344758] pci 0000:26:05.0: [1b21:1184] type 01 class 0x060400 [ 0.344909] pci 0000:26:05.0: PME# supported from D0 D3hot D3cold [ 0.345027] pci 0000:26:07.0: [1b21:1184] type 01 class 0x060400 [ 0.345177] pci 0000:26:07.0: PME# supported from D0 D3hot D3cold [ 0.345315] pci 0000:21:00.0: PCI bridge to [bus 26-2b] [ 0.345438] pci 0000:21:00.0: bridge window [io 0xd000-0xdfff] [ 0.345443] pci 0000:21:00.0: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.345450] pci 0000:21:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.345542] pci 0000:27:00.0: [8086:24fb] type 00 class 0x028000 [ 0.345620] pci 0000:27:00.0: reg 0x10: [mem 0xfcb00000-0xfcb01fff 64bit] [ 0.345895] pci 0000:27:00.0: PME# supported from D0 D3hot D3cold [ 0.349051] pci 0000:26:01.0: PCI bridge to [bus 27] [ 0.349175] pci 0000:26:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.349245] pci 0000:26:03.0: PCI bridge to [bus 28] [ 0.349439] pci 0000:26:05.0: PCI bridge to [bus 2a] [ 0.349657] pci 0000:2b:00.0: [10ec:8168] type 00 class 0x020000 [ 0.349705] pci 0000:2b:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.349749] pci 0000:2b:00.0: reg 0x18: [mem 0xfca00000-0xfca00fff 64bit] [ 0.349776] pci 0000:2b:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.349936] pci 0000:2b:00.0: supports D1 D2 [ 0.349938] pci 0000:2b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.353032] pci 0000:26:07.0: PCI bridge to [bus 2b] [ 0.353150] pci 0000:26:07.0: bridge window [io 0xd000-0xdfff] [ 0.353155] pci 0000:26:07.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.353162] pci 0000:26:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.353262] pci 0000:2c:00.0: [8086:2522] type 00 class 0x010802 [ 0.353304] pci 0000:2c:00.0: reg 0x10: [mem 0xfcc10000-0xfcc13fff 64bit] [ 0.353341] pci 0000:2c:00.0: reg 0x20: [mem 0xfcc00000-0xfcc0ffff 64bit] [ 0.353551] pci 0000:1d:04.0: PCI bridge to [bus 2c] [ 0.353670] pci 0000:1d:04.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.353733] pci 0000:2d:00.0: [1d6a:d107] type 00 class 0x020000 [ 0.353770] pci 0000:2d:00.0: reg 0x10: [mem 0xfc840000-0xfc84ffff 64bit] [ 0.353787] pci 0000:2d:00.0: reg 0x18: [mem 0xfc850000-0xfc850fff 64bit] [ 0.353803] pci 0000:2d:00.0: reg 0x20: [mem 0xfc400000-0xfc7fffff 64bit] [ 0.353814] pci 0000:2d:00.0: reg 0x30: [mem 0xfc800000-0xfc83ffff pref] [ 0.353896] pci 0000:2d:00.0: supports D1 D2 [ 0.353897] pci 0000:2d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.357023] pci 0000:1d:09.0: PCI bridge to [bus 2d] [ 0.357141] pci 0000:1d:09.0: bridge window [mem 0xfc400000-0xfc8fffff] [ 0.357672] pci 0000:2e:00.0: [1002:6811] type 00 class 0x030000 [ 0.357691] pci 0000:2e:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.357699] pci 0000:2e:00.0: reg 0x18: [mem 0xfd400000-0xfd43ffff 64bit] [ 0.357705] pci 0000:2e:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.357716] pci 0000:2e:00.0: reg 0x30: [mem 0xfd440000-0xfd45ffff pref] [ 0.357762] pci 0000:2e:00.0: supports D1 D2 [ 0.357763] pci 0000:2e:00.0: PME# supported from D1 D2 D3hot [ 0.357840] pci 0000:2e:00.1: [1002:aab0] type 00 class 0x040300 [ 0.357856] pci 0000:2e:00.1: reg 0x10: [mem 0xfd460000-0xfd463fff 64bit] [ 0.357916] pci 0000:2e:00.1: supports D1 D2 [ 0.361017] pci 0000:00:03.1: PCI bridge to [bus 2e] [ 0.361133] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.361135] pci 0000:00:03.1: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.361139] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.361692] pci 0000:2f:00.0: [1022:145a] type 00 class 0x130000 [ 0.361727] pci 0000:2f:00.0: enabling Extended Tags [ 0.361931] pci 0000:2f:00.2: [1022:1456] type 00 class 0x108000 [ 0.361950] pci 0000:2f:00.2: reg 0x18: [mem 0xfd100000-0xfd1fffff] [ 0.361961] pci 0000:2f:00.2: reg 0x24: [mem 0xfd200000-0xfd201fff] [ 0.361968] pci 0000:2f:00.2: enabling Extended Tags [ 0.362101] pci 0000:2f:00.3: [1022:145f] type 00 class 0x0c0330 [ 0.362114] pci 0000:2f:00.3: reg 0x10: [mem 0xfd000000-0xfd0fffff 64bit] [ 0.362135] pci 0000:2f:00.3: enabling Extended Tags [ 0.362283] pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold [ 0.362381] pci 0000:00:07.1: PCI bridge to [bus 2f] [ 0.362500] pci 0000:00:07.1: bridge window [mem 0xfd000000-0xfd2fffff] [ 0.362599] pci 0000:30:00.0: [1022:1455] type 00 class 0x130000 [ 0.362636] pci 0000:30:00.0: enabling Extended Tags [ 0.362847] pci 0000:30:00.2: [1022:7901] type 00 class 0x010601 [ 0.362877] pci 0000:30:00.2: reg 0x24: [mem 0xfd308000-0xfd308fff] [ 0.362887] pci 0000:30:00.2: enabling Extended Tags [ 0.363035] pci 0000:30:00.2: PME# supported from D3hot D3cold [ 0.363114] pci 0000:30:00.3: [1022:1457] type 00 class 0x040300 [ 0.363126] pci 0000:30:00.3: reg 0x10: [mem 0xfd300000-0xfd307fff] [ 0.363152] pci 0000:30:00.3: enabling Extended Tags [ 0.363300] pci 0000:30:00.3: PME# supported from D0 D3hot D3cold [ 0.363396] pci 0000:00:08.1: PCI bridge to [bus 30] [ 0.363516] pci 0000:00:08.1: bridge window [mem 0xfd300000-0xfd3fffff] [ 0.364281] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.364496] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.364691] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.364900] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.365082] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.365270] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.365459] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.365648] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.366634] pci 0000:2e:00.0: vgaarb: setting as boot VGA device [ 0.366634] pci 0000:2e:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.367007] pci 0000:2e:00.0: vgaarb: bridge control possible [ 0.367124] vgaarb: loaded [ 0.367388] SCSI subsystem initialized [ 0.367542] libata version 3.00 loaded. [ 0.367542] ACPI: bus type USB registered [ 0.367542] usbcore: registered new interface driver usbfs [ 0.368023] usbcore: registered new interface driver hub [ 0.368271] usbcore: registered new device driver usb [ 0.368271] media: Linux media interface: v0.10 [ 0.368334] Linux video capture interface: v2.00 [ 0.368477] pps_core: LinuxPPS API ver. 1 registered [ 0.368591] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.368772] PTP clock support registered [ 0.369098] EDAC MC: Ver: 3.0.0 [ 0.371166] Advanced Linux Sound Architecture Driver Initialized. [ 0.371207] PCI: Using ACPI for IRQ routing [ 0.373926] PCI: pci_cache_line_size set to 64 bytes [ 0.374026] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.374031] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.374033] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.374034] e820: reserve RAM buffer [mem 0xda7a2000-0xdbffffff] [ 0.374035] e820: reserve RAM buffer [mem 0xdbd9c000-0xdbffffff] [ 0.374036] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.374037] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 0.374460] NetLabel: Initializing [ 0.374460] NetLabel: domain hash size = 128 [ 0.374460] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.374460] NetLabel: unlabeled traffic allowed by default [ 0.375058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.375174] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.377084] clocksource: Switched to clocksource hpet [ 0.380822] pnp: PnP ACPI init [ 0.381132] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.381301] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.381415] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved [ 0.381553] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.381685] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.381921] system 00:03: [io 0x0280-0x028f] has been reserved [ 0.382080] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.382198] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.382316] system 00:03: [io 0x02b0-0x02bf] has been reserved [ 0.382439] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.382731] pnp 00:04: [dma 0 disabled] [ 0.382778] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.383116] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.383247] system 00:05: [io 0x040b] has been reserved [ 0.383365] system 00:05: [io 0x04d6] has been reserved [ 0.383481] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.383595] system 00:05: [io 0x0c14] has been reserved [ 0.383708] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.383823] system 00:05: [io 0x0c52] has been reserved [ 0.383936] system 00:05: [io 0x0c6c] has been reserved [ 0.384072] system 00:05: [io 0x0c6f] has been reserved [ 0.384185] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.384300] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.384414] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.384529] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.384644] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.384759] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.384874] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.384988] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.385124] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.385240] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.385355] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.385472] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.385590] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.385707] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.385823] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.385941] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.386078] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.386201] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386779] pnp: PnP ACPI: found 6 devices [ 0.390192] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.390466] pci 0000:1d:00.0: PCI bridge to [bus 1e] [ 0.390582] pci 0000:1d:00.0: bridge window [mem 0xfce00000-0xfcefffff] [ 0.390704] pci 0000:1d:02.0: PCI bridge to [bus 20] [ 0.390816] pci 0000:1d:02.0: bridge window [io 0xe000-0xefff] [ 0.390934] pci 0000:1d:02.0: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.391079] pci 0000:26:01.0: PCI bridge to [bus 27] [ 0.391195] pci 0000:26:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.391321] pci 0000:26:03.0: PCI bridge to [bus 28] [ 0.391446] pci 0000:26:05.0: PCI bridge to [bus 2a] [ 0.391572] pci 0000:26:07.0: PCI bridge to [bus 2b] [ 0.391685] pci 0000:26:07.0: bridge window [io 0xd000-0xdfff] [ 0.391804] pci 0000:26:07.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.391924] pci 0000:26:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.392115] pci 0000:21:00.0: PCI bridge to [bus 26-2b] [ 0.392228] pci 0000:21:00.0: bridge window [io 0xd000-0xdfff] [ 0.392350] pci 0000:21:00.0: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.392472] pci 0000:21:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.392655] pci 0000:1d:03.0: PCI bridge to [bus 21-2b] [ 0.392771] pci 0000:1d:03.0: bridge window [io 0xd000-0xdfff] [ 0.392891] pci 0000:1d:03.0: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.393030] pci 0000:1d:03.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.393211] pci 0000:1d:04.0: PCI bridge to [bus 2c] [ 0.393327] pci 0000:1d:04.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.393452] pci 0000:1d:09.0: PCI bridge to [bus 2d] [ 0.393569] pci 0000:1d:09.0: bridge window [mem 0xfc400000-0xfc8fffff] [ 0.393693] pci 0000:03:00.2: PCI bridge to [bus 1d-2d] [ 0.393809] pci 0000:03:00.2: bridge window [io 0xd000-0xefff] [ 0.393929] pci 0000:03:00.2: bridge window [mem 0xfc400000-0xfcefffff] [ 0.394073] pci 0000:03:00.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.394254] pci 0000:00:01.3: PCI bridge to [bus 03-2d] [ 0.394369] pci 0000:00:01.3: bridge window [io 0xd000-0xefff] [ 0.394488] pci 0000:00:01.3: bridge window [mem 0xfc400000-0xfcffffff] [ 0.394609] pci 0000:00:01.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.394788] pci 0000:00:03.1: PCI bridge to [bus 2e] [ 0.394903] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.395050] pci 0000:00:03.1: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.395169] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.395348] pci 0000:00:07.1: PCI bridge to [bus 2f] [ 0.395464] pci 0000:00:07.1: bridge window [mem 0xfd000000-0xfd2fffff] [ 0.395586] pci 0000:00:08.1: PCI bridge to [bus 30] [ 0.395702] pci 0000:00:08.1: bridge window [mem 0xfd300000-0xfd3fffff] [ 0.395825] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.395826] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.395827] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.395828] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.395830] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.395831] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.395832] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.395833] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.395835] pci_bus 0000:03: resource 0 [io 0xd000-0xefff] [ 0.395836] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfcffffff] [ 0.395837] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.395839] pci_bus 0000:1d: resource 0 [io 0xd000-0xefff] [ 0.395840] pci_bus 0000:1d: resource 1 [mem 0xfc400000-0xfcefffff] [ 0.395841] pci_bus 0000:1d: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.395842] pci_bus 0000:1e: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.395843] pci_bus 0000:20: resource 0 [io 0xe000-0xefff] [ 0.395845] pci_bus 0000:20: resource 1 [mem 0xfcd00000-0xfcdfffff] [ 0.395846] pci_bus 0000:21: resource 0 [io 0xd000-0xdfff] [ 0.395847] pci_bus 0000:21: resource 1 [mem 0xfca00000-0xfcbfffff] [ 0.395848] pci_bus 0000:21: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.395849] pci_bus 0000:26: resource 0 [io 0xd000-0xdfff] [ 0.395850] pci_bus 0000:26: resource 1 [mem 0xfca00000-0xfcbfffff] [ 0.395851] pci_bus 0000:26: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.395853] pci_bus 0000:27: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 0.395854] pci_bus 0000:2b: resource 0 [io 0xd000-0xdfff] [ 0.395855] pci_bus 0000:2b: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.395856] pci_bus 0000:2b: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.395858] pci_bus 0000:2c: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.395859] pci_bus 0000:2d: resource 1 [mem 0xfc400000-0xfc8fffff] [ 0.395860] pci_bus 0000:2e: resource 0 [io 0xf000-0xffff] [ 0.395861] pci_bus 0000:2e: resource 1 [mem 0xfd400000-0xfd4fffff] [ 0.395862] pci_bus 0000:2e: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.395863] pci_bus 0000:2f: resource 1 [mem 0xfd000000-0xfd2fffff] [ 0.395865] pci_bus 0000:30: resource 1 [mem 0xfd300000-0xfd3fffff] [ 0.396026] NET: Registered protocol family 2 [ 0.396605] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.397481] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 0.398506] TCP: Hash tables configured (established 262144 bind 65536) [ 0.398984] UDP hash table entries: 16384 (order: 9, 2621440 bytes) [ 0.399870] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes) [ 0.400726] NET: Registered protocol family 1 [ 0.401130] RPC: Registered named UNIX socket transport module. [ 0.401256] RPC: Registered udp transport module. [ 0.401366] RPC: Registered tcp transport module. [ 0.401476] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.402122] pci 0000:2e:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.402483] PCI: CLS 64 bytes, default 64 [ 0.478853] AMD-Vi: IOMMU performance counters supported [ 0.479395] iommu: Adding device 0000:00:01.0 to group 0 [ 0.479640] iommu: Adding device 0000:00:01.3 to group 1 [ 0.479926] iommu: Adding device 0000:00:02.0 to group 2 [ 0.480241] iommu: Adding device 0000:00:03.0 to group 3 [ 0.480480] iommu: Adding device 0000:00:03.1 to group 4 [ 0.480773] iommu: Adding device 0000:00:04.0 to group 5 [ 0.481042] iommu: Adding device 0000:00:07.0 to group 6 [ 0.481326] iommu: Adding device 0000:00:07.1 to group 7 [ 0.481576] iommu: Adding device 0000:00:08.0 to group 8 [ 0.481866] iommu: Adding device 0000:00:08.1 to group 9 [ 0.482136] iommu: Adding device 0000:00:14.0 to group 10 [ 0.482274] iommu: Adding device 0000:00:14.3 to group 10 [ 0.482620] iommu: Adding device 0000:00:18.0 to group 11 [ 0.482756] iommu: Adding device 0000:00:18.1 to group 11 [ 0.482891] iommu: Adding device 0000:00:18.2 to group 11 [ 0.483043] iommu: Adding device 0000:00:18.3 to group 11 [ 0.483179] iommu: Adding device 0000:00:18.4 to group 11 [ 0.483316] iommu: Adding device 0000:00:18.5 to group 11 [ 0.483450] iommu: Adding device 0000:00:18.6 to group 11 [ 0.483582] iommu: Adding device 0000:00:18.7 to group 11 [ 0.483887] iommu: Adding device 0000:03:00.0 to group 12 [ 0.484050] iommu: Adding device 0000:03:00.1 to group 12 [ 0.484193] iommu: Adding device 0000:03:00.2 to group 12 [ 0.484318] iommu: Adding device 0000:1d:00.0 to group 12 [ 0.484442] iommu: Adding device 0000:1d:02.0 to group 12 [ 0.484567] iommu: Adding device 0000:1d:03.0 to group 12 [ 0.484692] iommu: Adding device 0000:1d:04.0 to group 12 [ 0.484816] iommu: Adding device 0000:1d:09.0 to group 12 [ 0.484946] iommu: Adding device 0000:1e:00.0 to group 12 [ 0.485106] iommu: Adding device 0000:20:00.0 to group 12 [ 0.485235] iommu: Adding device 0000:21:00.0 to group 12 [ 0.485362] iommu: Adding device 0000:26:01.0 to group 12 [ 0.485489] iommu: Adding device 0000:26:03.0 to group 12 [ 0.485616] iommu: Adding device 0000:26:05.0 to group 12 [ 0.485744] iommu: Adding device 0000:26:07.0 to group 12 [ 0.485881] iommu: Adding device 0000:27:00.0 to group 12 [ 0.486024] iommu: Adding device 0000:2b:00.0 to group 12 [ 0.486162] iommu: Adding device 0000:2c:00.0 to group 12 [ 0.486291] iommu: Adding device 0000:2d:00.0 to group 12 [ 0.486564] iommu: Adding device 0000:2e:00.0 to group 13 [ 0.486760] iommu: Using direct mapping for device 0000:2e:00.0 [ 0.486919] iommu: Adding device 0000:2e:00.1 to group 13 [ 0.487142] iommu: Adding device 0000:2f:00.0 to group 14 [ 0.487422] iommu: Adding device 0000:2f:00.2 to group 15 [ 0.487661] iommu: Adding device 0000:2f:00.3 to group 16 [ 0.487962] iommu: Adding device 0000:30:00.0 to group 17 [ 0.488251] iommu: Adding device 0000:30:00.2 to group 18 [ 0.488538] iommu: Adding device 0000:30:00.3 to group 19 [ 0.488878] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.488990] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.489125] PPR NX GT IA GA PC GA_vAPIC [ 0.489396] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.495970] amd_uncore: AMD NB counters detected [ 0.496115] amd_uncore: AMD LLC counters detected [ 0.497035] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.500048] Scanning for low memory corruption every 60 seconds [ 0.501313] Initialise system trusted keyrings [ 0.501524] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 0.505427] NFS: Registering the id_resolver key type [ 0.505561] Key type id_resolver registered [ 0.505682] Key type id_legacy registered [ 0.505793] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.508044] NET: Registered protocol family 38 [ 0.508174] async_tx: api initialized (async) [ 0.508287] Key type asymmetric registered [ 0.508403] Asymmetric key parser 'x509' registered [ 0.508579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.508880] io scheduler noop registered [ 0.509054] io scheduler cfq registered (default) [ 0.515546] pcieport 0000:00:01.3: AER enabled with IRQ 28 [ 0.516352] pcieport 0000:00:03.1: AER enabled with IRQ 29 [ 0.516526] pcieport 0000:00:07.1: AER enabled with IRQ 30 [ 0.519329] pcieport 0000:00:08.1: AER enabled with IRQ 32 [ 0.519476] pcieport 0000:00:01.3: Signaling PME with IRQ 28 [ 0.519646] pcieport 0000:00:03.1: Signaling PME with IRQ 29 [ 0.519797] pcieport 0000:00:07.1: Signaling PME with IRQ 30 [ 0.519954] pcieport 0000:00:08.1: Signaling PME with IRQ 32 [ 0.520395] Non-volatile memory driver v1.3 [ 0.520564] Linux agpgart interface v0.103 [ 0.521342] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.521556] ACPI: Power Button [PWRB] [ 0.521725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.522063] ACPI: Power Button [PWRF] [ 0.522341] Monitor-Mwait will be used to enter C-1 state [ 0.524913] AMD IOMMUv2 driver by Joerg Roedel [ 0.530920] loop: module loaded [ 0.531396] nvme nvme0: pci function 0000:2c:00.0 [ 0.531872] ahci 0000:03:00.1: version 3.0 [ 0.532054] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled [ 0.532231] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.532413] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.534072] scsi host0: ahci [ 0.534423] scsi host1: ahci [ 0.534713] scsi host2: ahci [ 0.535024] scsi host3: ahci [ 0.535320] scsi host4: ahci [ 0.535595] scsi host5: ahci [ 0.535881] scsi host6: ahci [ 0.536222] scsi host7: ahci [ 0.536392] ata1: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80100 irq 47 [ 0.536581] ata2: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80180 irq 47 [ 0.536757] ata3: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80200 irq 47 [ 0.536931] ata4: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80280 irq 47 [ 0.537118] ata5: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80300 irq 47 [ 0.537291] ata6: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80380 irq 47 [ 0.537465] ata7: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80400 irq 47 [ 0.537638] ata8: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80480 irq 47 [ 0.537982] ahci 0000:20:00.0: SSS flag set, parallel bus scan disabled [ 0.538170] ahci 0000:20:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.538363] ahci 0000:20:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.538959] scsi host8: ahci [ 0.539266] scsi host9: ahci [ 0.539441] ata9: SATA max UDMA/133 abar m512@0xfcd00000 port 0xfcd00100 irq 48 [ 0.539633] ata10: SATA max UDMA/133 abar m512@0xfcd00000 port 0xfcd00180 irq 48 [ 0.539962] ahci 0000:30:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.540163] ahci 0000:30:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.540630] scsi host10: ahci [ 0.540834] ata11: SATA max UDMA/133 abar m4096@0xfd308000 port 0xfd308100 irq 50 [ 0.541296] libphy: Fixed MDIO Bus: probed [ 0.541442] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.541568] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.541709] Intel(R) Wireless WiFi driver for Linux [ 0.541828] Copyright(c) 2003- 2015 Intel Corporation [ 0.542483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.542627] ehci-pci: EHCI PCI platform driver [ 0.542764] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.542891] ohci-pci: OHCI PCI platform driver [ 0.543170] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.543329] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 0.596452] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 0.596830] iwlwifi 0000:27:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 0.597424] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.597561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.597740] usb usb1: Product: xHCI Host Controller [ 0.597855] usb usb1: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.597975] usb usb1: SerialNumber: 0000:03:00.0 [ 0.598512] hub 1-0:1.0: USB hub found [ 0.598707] hub 1-0:1.0: 14 ports detected [ 0.599699] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.599835] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 0.600046] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 0.600232] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.600457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.600580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.600753] usb usb2: Product: xHCI Host Controller [ 0.600866] usb usb2: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.600984] usb usb2: SerialNumber: 0000:03:00.0 [ 0.601373] hub 2-0:1.0: USB hub found [ 0.601546] hub 2-0:1.0: 8 ports detected [ 0.601877] usb: port power management may be unreliable [ 0.602452] xhci_hcd 0000:1e:00.0: xHCI Host Controller [ 0.602572] xhci_hcd 0000:1e:00.0: new USB bus registered, assigned bus number 3 [ 0.657633] xhci_hcd 0000:1e:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010 [ 0.658150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.658270] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.658447] usb usb3: Product: xHCI Host Controller [ 0.658560] usb usb3: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.658679] usb usb3: SerialNumber: 0000:1e:00.0 [ 0.658950] hub 3-0:1.0: USB hub found [ 0.659126] hub 3-0:1.0: 2 ports detected [ 0.659383] xhci_hcd 0000:1e:00.0: xHCI Host Controller [ 0.659529] xhci_hcd 0000:1e:00.0: new USB bus registered, assigned bus number 4 [ 0.659711] xhci_hcd 0000:1e:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.659866] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.660084] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.660204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.660381] usb usb4: Product: xHCI Host Controller [ 0.660495] usb usb4: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.660614] usb usb4: SerialNumber: 0000:1e:00.0 [ 0.660883] hub 4-0:1.0: USB hub found [ 0.661082] hub 4-0:1.0: 2 ports detected [ 0.661425] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 0.661546] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 5 [ 0.661840] xhci_hcd 0000:2f:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410 [ 0.662284] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.662404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.662581] usb usb5: Product: xHCI Host Controller [ 0.662695] usb usb5: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.662814] usb usb5: SerialNumber: 0000:2f:00.3 [ 0.663110] hub 5-0:1.0: USB hub found [ 0.663277] hub 5-0:1.0: 4 ports detected [ 0.663646] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 0.663794] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 6 [ 0.663975] xhci_hcd 0000:2f:00.3: Host supports USB 3.0 SuperSpeed [ 0.664125] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.664335] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.664455] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.664631] usb usb6: Product: xHCI Host Controller [ 0.664746] usb usb6: Manufacturer: Linux 4.14.96-gentoo-debug xhci-hcd [ 0.664864] usb usb6: SerialNumber: 0000:2f:00.3 [ 0.665166] hub 6-0:1.0: USB hub found [ 0.665330] hub 6-0:1.0: 4 ports detected [ 0.665771] i8042: PNP: No PS/2 controller found. [ 0.666092] mousedev: PS/2 mouse device common for all mice [ 0.666526] rtc_cmos 00:02: RTC can wake from S4 [ 0.666915] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.667119] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.667508] device-mapper: uevent: version 1.0.3 [ 0.667765] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.668184] EDAC amd64: Node 0: DRAM ECC enabled. [ 0.668305] EDAC amd64: F17h detected (node 0). [ 0.668456] EDAC MC: UMC0 chip selects: [ 0.668457] EDAC amd64: MC: 0: 0MB 1: 0MB [ 0.668568] EDAC amd64: MC: 2: 0MB 3: 0MB [ 0.668678] EDAC amd64: MC: 4: 0MB 5: 0MB [ 0.668789] EDAC amd64: MC: 6: 0MB 7: 0MB [ 0.668901] EDAC MC: UMC1 chip selects: [ 0.668902] EDAC amd64: MC: 0: 32767MB 1: 32767MB [ 0.669032] EDAC amd64: MC: 2: 32767MB 3: 32767MB [ 0.669143] EDAC amd64: MC: 4: 0MB 5: 0MB [ 0.669254] EDAC amd64: MC: 6: 0MB 7: 0MB [ 0.669365] EDAC amd64: using x8 syndromes. [ 0.669473] EDAC amd64: MCT channel count: 1 [ 0.669922] EDAC MC0: Giving out device to module amd64_edac controller F17h: DEV 0000:00:18.3 (INTERRUPT) [ 0.670216] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED) [ 0.672312] AMD64 EDAC driver v3.5.0 [ 0.672848] ledtrig-cpu: registered to indicate activity on CPUs [ 0.672984] hidraw: raw HID events driver (C) Jiri Kosina [ 0.673178] usbcore: registered new interface driver usbhid [ 0.673319] usbhid: USB HID core driver [ 0.673850] snd_hda_intel 0000:2e:00.1: Force to non-snoop mode [ 0.675997] Initializing XFRM netlink socket [ 0.676321] NET: Registered protocol family 10 [ 0.676933] Segment Routing with IPv6 [ 0.677126] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.677456] NET: Registered protocol family 17 [ 0.677599] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.677869] Key type dns_resolver registered [ 0.679782] snd_hda_intel 0000:2e:00.1: Too many HDMI devices [ 0.679911] snd_hda_intel 0000:2e:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 0.680107] snd_hda_intel 0000:2e:00.1: Too many HDMI devices [ 0.680228] snd_hda_intel 0000:2e:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 0.680409] snd_hda_intel 0000:2e:00.1: Too many HDMI devices [ 0.680526] snd_hda_intel 0000:2e:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 0.680707] snd_hda_intel 0000:2e:00.1: Too many HDMI devices [ 0.680823] snd_hda_intel 0000:2e:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 0.682447] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2e:00.1/sound/card0/input2 [ 0.682877] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2e:00.1/sound/card0/input3 [ 0.683208] random: fast init done [ 0.683324] microcode: microcode updated early to new patch_level=0x0800820b [ 0.683559] microcode: CPU0: patch_level=0x0800820b [ 0.683692] microcode: CPU1: patch_level=0x0800820b [ 0.683822] microcode: CPU2: patch_level=0x0800820b [ 0.683957] microcode: CPU3: patch_level=0x0800820b [ 0.684095] microcode: CPU4: patch_level=0x0800820b [ 0.684244] microcode: CPU5: patch_level=0x0800820b [ 0.684378] microcode: CPU6: patch_level=0x0800820b [ 0.684520] microcode: CPU7: patch_level=0x0800820b [ 0.684660] microcode: CPU8: patch_level=0x0800820b [ 0.684815] microcode: CPU9: patch_level=0x0800820b [ 0.684952] microcode: CPU10: patch_level=0x0800820b [ 0.685096] microcode: CPU11: patch_level=0x0800820b [ 0.685240] microcode: CPU12: patch_level=0x0800820b [ 0.685385] microcode: CPU13: patch_level=0x0800820b [ 0.685531] microcode: CPU14: patch_level=0x0800820b [ 0.685675] microcode: CPU15: patch_level=0x0800820b [ 0.685870] microcode: Microcode Update Driver: v2.2. [ 0.685882] sched_clock: Marking stable (685856991, 0)->(828338043, -142481052) [ 0.686636] registered taskstats version 1 [ 0.686765] Loading compiled-in X.509 certificates [ 0.686895] page_owner is disabled [ 0.687741] Magic number: 15:789:340 [ 0.687883] usb usb1-port11: hash matches [ 0.688174] console [netcon0] enabled [ 0.688297] netconsole: network logging started [ 0.688741] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 0.688938] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.688966] acpi_cpufreq: overriding BIOS provided _PSD data [ 0.689130] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.689436] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 0.689569] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 0.689705] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 0.689825] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 0.689948] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 0.690709] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 0.691129] ALSA device list: [ 0.691243] No soundcards found. [ 0.706724] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input4 [ 0.707032] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input5 [ 0.707323] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input6 [ 0.707607] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input7 [ 0.707896] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input8 [ 0.708189] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input9 [ 0.708465] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:30:00.3/sound/card1/input10 [ 0.753633] nvme0n1: p1 p2 [ 0.844534] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.847351] ata1.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 0.847495] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.850303] ata1.00: configured for UDMA/133 [ 0.851022] scsi 0:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 0.852322] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 0.852548] ata11: SATA link down (SStatus 0 SControl 300) [ 0.852594] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.852937] sd 0:0:0:0: [sda] Write Protect is off [ 0.853080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.853112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.896084] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.898156] ata9.00: ATA-8: WDC WD3200BEVT-11A03T0, 01.01A01, max UDMA/133 [ 0.898287] ata9.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.900403] ata9.00: configured for UDMA/133 [ 0.924593] sda: sda1 [ 0.925768] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.983082] usb 1-6: new full-speed USB device number 2 using xhci_hcd [ 1.158778] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.161456] ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 1.161583] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.164474] ata2.00: configured for UDMA/133 [ 1.165177] scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 1.165932] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.166202] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.166366] sd 1:0:0:0: [sdb] Write Protect is off [ 1.166487] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.166517] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.231245] sdb: sdb1 [ 1.232233] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.382245] usb 1-6: New USB device found, idVendor=0403, idProduct=6001 [ 1.382422] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.382551] usb 1-6: Product: FT232R USB UART [ 1.382669] usb 1-6: Manufacturer: FTDI [ 1.382786] usb 1-6: SerialNumber: A601EKH9 [ 1.481005] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.484078] ata3.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 1.484227] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.487401] ata3.00: configured for UDMA/133 [ 1.488229] scsi 2:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 1.489236] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.489421] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.489580] sd 2:0:0:0: [sdc] Write Protect is off [ 1.489700] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.489766] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.503214] tsc: Refined TSC clocksource calibration: 3700.292 MHz [ 1.503376] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6aacd499754, max_idle_ns: 881590656182 ns [ 1.561866] sdc: sdc1 [ 1.562966] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.573172] usb 1-7: new high-speed USB device number 3 using xhci_hcd [ 1.792185] usb 1-7: New USB device found, idVendor=03f0, idProduct=3e17 [ 1.792319] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.792448] usb 1-7: Product: HP LaserJet P1006 [ 1.792568] usb 1-7: Manufacturer: Hewlett-Packard [ 1.792687] usb 1-7: SerialNumber: AC1BV3Z [ 1.799307] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.801916] ata4.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 1.802041] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.804732] ata4.00: configured for UDMA/133 [ 1.805310] scsi 3:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 1.806195] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.806383] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.806550] sd 3:0:0:0: [sdd] Write Protect is off [ 1.806672] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.806741] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.868439] sdd: sdd1 [ 1.869533] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.976173] usb 1-9: new full-speed USB device number 4 using xhci_hcd [ 2.117147] ata5: SATA link down (SStatus 0 SControl 300) [ 2.343160] usb 1-9: New USB device found, idVendor=8087, idProduct=0aa7 [ 2.343293] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.432987] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.434668] ata6.00: ATA-11: WDC WDS500G2B0A-00SM50, X61130WD, max UDMA/133 [ 2.434799] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.436908] ata6.00: configured for UDMA/133 [ 2.437618] scsi 5:0:0:0: Direct-Access ATA WDC WDS500G2B0A- 30WD PQ: 0 ANSI: 5 [ 2.438542] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.440696] sd 5:0:0:0: [sde] Write Protect is off [ 2.440817] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.440850] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.441769] sde: sde1 sde2 sde3 sde4 [ 2.442810] sd 5:0:0:0: [sde] Attached SCSI disk [ 2.511615] clocksource: Switched to clocksource tsc [ 2.525169] usb 1-11: new high-speed USB device number 5 using xhci_hcd [ 2.738231] usb 1-11: New USB device found, idVendor=05e3, idProduct=0610 [ 2.738364] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.738549] usb 1-11: Product: USB2.0 Hub [ 2.743328] hub 1-11:1.0: USB hub found [ 2.747244] hub 1-11:1.0: 4 ports detected [ 2.753047] ata7: SATA link down (SStatus 0 SControl 330) [ 2.949513] usb 1-14: new high-speed USB device number 6 using xhci_hcd [ 3.191311] usb 1-14: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.191446] usb 1-14: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.191631] usb 1-14: Product: UB91C [ 3.191748] usb 1-14: Manufacturer: ATHEROS [ 3.191866] usb 1-14: SerialNumber: 12345 [ 3.240517] usb 1-11.1: new high-speed USB device number 7 using xhci_hcd [ 3.354313] usb 1-11.1: New USB device found, idVendor=05e3, idProduct=0610 [ 3.354449] usb 1-11.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.354634] usb 1-11.1: Product: USB2.0 Hub [ 3.360481] hub 1-11.1:1.0: USB hub found [ 3.364278] hub 1-11.1:1.0: 4 ports detected [ 3.704515] usb 1-11.1.2: new low-speed USB device number 8 using xhci_hcd [ 3.791511] ata8: failed to resume link (SControl 0) [ 3.791719] ata8: SATA link down (SStatus 0 SControl 0) [ 3.792333] scsi 8:0:0:0: Direct-Access ATA WDC WD3200BEVT-1 1A01 PQ: 0 ANSI: 5 [ 3.793168] sd 8:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.793413] sd 8:0:0:0: [sdf] Write Protect is off [ 3.793537] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.793603] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.827374] sdf: sdf1 [ 3.828205] sd 8:0:0:0: [sdf] Attached SCSI disk [ 3.934334] usb 1-11.1.2: New USB device found, idVendor=0461, idProduct=4d81 [ 3.934469] usb 1-11.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.934658] usb 1-11.1.2: Product: USB Optical Mouse [ 3.969678] input: USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-11/1-11.1/1-11.1.2/1-11.1.2:1.0/0003:0461:4D81.0001/input/input11 [ 3.970660] hid-generic 0003:0461:4D81.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:03:00.0-11.1.2/input0 [ 4.050195] usb 1-11.1.3: new low-speed USB device number 9 using xhci_hcd [ 4.101844] ata10: SATA link down (SStatus 0 SControl 300) [ 4.102105] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 4.118144] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null) [ 4.118355] VFS: Mounted root (ext4 filesystem) readonly on device 8:67. [ 4.119310] devtmpfs: mounted [ 4.119427] debug: unmapping init [mem 0xffffffffb351b000-0xffffffffb36e3fff] [ 4.127206] Write protecting the kernel read-only data: 28672k [ 4.128098] debug: unmapping init [mem 0xffff88d098c09000-0xffff88d098dfffff] [ 4.128368] debug: unmapping init [mem 0xffff88d099334000-0xffff88d0993fffff] [ 4.128627] rodata_test: all tests were successful [ 4.194763] kbd_mode (1595) used greatest stack depth: 12760 bytes left [ 4.205563] loadkeys (1596) used greatest stack depth: 11728 bytes left [ 4.289349] usb 1-11.1.3: New USB device found, idVendor=413c, idProduct=2107 [ 4.289481] usb 1-11.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.289665] usb 1-11.1.3: Product: Dell USB Entry Keyboard [ 4.289787] usb 1-11.1.3: Manufacturer: DELL [ 4.323880] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-11/1-11.1/1-11.1.3/1-11.1.3:1.0/0003:413C:2107.0002/input/input12 [ 4.376913] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:03:00.0-11.1.3/input0 [ 4.622062] random: lvm: uninitialized urandom read (4 bytes read) [ 4.631220] random: lvm: uninitialized urandom read (4 bytes read) [ 5.360256] udevd[2067]: starting version 3.2.5 [ 5.368514] random: udevd: uninitialized urandom read (16 bytes read) [ 5.412132] udevd[2067]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules' [ 5.412894] udevd[2067]: starting eudev-3.2.5 [ 5.591888] random: crng init done [ 5.592021] random: 5 urandom warning(s) missed due to ratelimiting [ 5.841247] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.853304] md: md0 stopped. [ 5.859397] md/raid:md0: device sda1 operational as raid disk 0 [ 5.859519] md/raid:md0: device sdd1 operational as raid disk 3 [ 5.859639] md/raid:md0: device sdc1 operational as raid disk 2 [ 5.859758] md/raid:md0: device sdb1 operational as raid disk 1 [ 5.861881] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 5.864511] udevd[2067]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules' [ 5.866365] md0: detected capacity change from 0 to 8796106653696 [ 66.863157] udevd[2067]: worker [2105] /devices/virtual/block/md0 is taking a long time [ 186.965091] udevd[2105]: timeout 'udisks-lvm-pv-export d2uPGL-1XLV-VdAb-L05Y-KhdX-uTHk-QFspo3' [ 186.965345] udevd[2105]: slow: 'udisks-lvm-pv-export d2uPGL-1XLV-VdAb-L05Y-KhdX-uTHk-QFspo3' [2109] [ 186.999448] udevd[2067]: worker [2105] /devices/virtual/block/md0 timeout; kill it [ 186.999679] udevd[2067]: seq 1385 '/devices/virtual/block/md0' killed [ 187.000471] udevd[2067]: worker [2105] terminated by signal 9 (Killed) [ 187.000755] udevd[2067]: worker [2105] failed while handling '/devices/virtual/block/md0' [ 250.070660] udevd[2067]: worker [2106] /devices/virtual/block/md0 is taking a long time [ 288.846412] udevd[2426]: failed to execute '/lib/udev/pci-db' 'pci-db /devices/pci0000:00/0000:00:01.3/0000:03:00.1': No such file or directory [ 288.848329] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 288.863743] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 288.867397] udevd[2438]: failed to execute '/lib/udev/pci-db' 'pci-db /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:2c:00.0': No such file or directory [ 288.874888] WARNING! power/level is deprecated; use power/control instead [ 288.896883] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 288.896886] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 288.906965] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 288.914359] usblp 1-7:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17 [ 288.914437] usbcore: registered new interface driver usblp [ 288.961981] Bluetooth: Core ver 2.22 [ 288.962037] NET: Registered protocol family 31 [ 288.962039] Bluetooth: HCI device and connection manager initialized [ 288.962093] Bluetooth: HCI socket layer initialized [ 288.962097] Bluetooth: L2CAP socket layer initialized [ 288.962124] Bluetooth: SCO socket layer initialized [ 288.967575] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 288.967941] usbcore: registered new interface driver usbserial [ 288.967982] usbcore: registered new interface driver usbserial_generic [ 288.968302] usbserial: USB Serial support registered for generic [ 288.968569] r8169 0000:2b:00.0 eth1: RTL8168e/8111e at 0xffffa65d83215000, 7c:8b:ca:04:0d:8b, XID 0c200000 IRQ 90 [ 288.968572] r8169 0000:2b:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 288.981264] usbcore: registered new interface driver ftdi_sio [ 288.981310] usbserial: USB Serial support registered for FTDI USB Serial Device [ 288.981392] ftdi_sio 1-6:1.0: FTDI USB Serial Device converter detected [ 288.981469] usb 1-6: Detected FT232RL [ 288.988393] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB0 [ 289.029405] usb 1-14: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 289.030239] usbcore: registered new interface driver ath9k_htc [ 289.039943] usbcore: registered new interface driver btusb [ 289.060293] atlantic 0000:2d:00.0 enp45s0: renamed from eth0 [ 289.060374] Bluetooth: hci0: read Intel version: 370810225019140f34 [ 289.060409] Bluetooth: hci0: Intel device is already patched. patch num: 34 [ 289.072642] r8169 0000:2b:00.0 enp43s0: renamed from eth1 [ 289.090855] kvm: Nested Virtualization enabled [ 289.090876] kvm: Nested Paging enabled [ 289.090878] SVM: Virtual VMLOAD VMSAVE supported [ 289.090878] SVM: Virtual GIF supported [ 289.125277] udevd[2067]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules' [ 289.163986] [drm] radeon kernel modesetting enabled. [ 289.164837] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1458:0x226C 0x00). [ 289.164936] radeon 0000:2e:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 289.165073] ATOM BIOS: GV [ 289.165214] radeon 0000:2e:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 289.165216] radeon 0000:2e:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [ 289.165220] [drm] Detected VRAM RAM=2048M, BAR=256M [ 289.165221] [drm] RAM width 256bits DDR [ 289.165521] [TTM] Zone kernel: Available graphics memory: 16388404 kiB [ 289.165526] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 289.165527] [TTM] Initializing pool allocator [ 289.165541] [TTM] Initializing DMA pool allocator [ 289.165740] [drm] radeon: 2048M of VRAM memory ready [ 289.165742] [drm] radeon: 2048M of GTT memory ready. [ 289.165754] [drm] Loading pitcairn Microcode [ 289.166968] [drm] Internal thermal controller with fan control [ 289.167147] [drm] probing gen 2 caps for device 1022:1453 = 737903/e [ 289.175029] [drm] radeon: dpm initialized [ 289.175764] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 289.175786] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 289.177916] [drm] probing gen 2 caps for device 1022:1453 = 737903/e [ 289.177929] [drm] PCIE gen 3 link speeds already enabled [ 289.203882] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 289.204045] radeon 0000:2e:00.0: WB enabled [ 289.204047] radeon 0000:2e:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88d6ed972c00 [ 289.204049] radeon 0000:2e:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88d6ed972c04 [ 289.204050] radeon 0000:2e:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88d6ed972c08 [ 289.204052] radeon 0000:2e:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88d6ed972c0c [ 289.204053] radeon 0000:2e:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88d6ed972c10 [ 289.204374] radeon 0000:2e:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffa65d8a035a18 [ 289.218836] radeon 0000:2e:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88d6ed972c18 [ 289.218838] radeon 0000:2e:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88d6ed972c1c [ 289.218859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 289.218861] [drm] Driver supports precise vblank timestamp query. [ 289.218865] radeon 0000:2e:00.0: radeon: MSI limited to 32-bit [ 289.219238] radeon 0000:2e:00.0: radeon: using MSI. [ 289.219415] [drm] radeon: irq initialized. [ 289.437889] [drm] ring test on 0 succeeded in 1 usecs [ 289.437897] [drm] ring test on 1 succeeded in 1 usecs [ 289.437904] [drm] ring test on 2 succeeded in 1 usecs [ 289.437916] [drm] ring test on 3 succeeded in 5 usecs [ 289.437928] [drm] ring test on 4 succeeded in 5 usecs [ 289.564483] [drm] ring test on 5 succeeded in 2 usecs [ 289.564490] [drm] UVD initialized successfully. [ 289.643169] [drm] ring test on 6 succeeded in 24 usecs [ 289.643198] [drm] ring test on 7 succeeded in 4 usecs [ 289.643200] [drm] VCE initialized successfully. [ 289.644049] [drm] ib test on ring 0 succeeded in 0 usecs [ 289.644103] [drm] ib test on ring 1 succeeded in 0 usecs [ 289.644151] [drm] ib test on ring 2 succeeded in 0 usecs [ 289.644240] [drm] ib test on ring 3 succeeded in 0 usecs [ 289.644288] [drm] ib test on ring 4 succeeded in 0 usecs [ 290.129229] usb 1-14: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 290.255447] [drm] ib test on ring 5 succeeded [ 290.378732] ath9k_htc 1-14:1.0: ath9k_htc: HTC initialized with 33 credits [ 290.412978] EXT4-fs (sde3): re-mounted. Opts: (null) [ 290.430996] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null) [ 290.604631] ath9k_htc 1-14:1.0: ath9k_htc: FW Version: 1.4 [ 290.604635] ath9k_htc 1-14:1.0: FW RMW support: On [ 290.604637] ath: EEPROM regdomain: 0x833a [ 290.604638] ath: EEPROM indicates we should expect a country code [ 290.604641] ath: doing EEPROM country->regdmn map search [ 290.604642] ath: country maps to regdmn code: 0x37 [ 290.604644] ath: Country alpha2 being used: GB [ 290.604645] ath: Regpair used: 0x37 [ 290.610221] ieee80211 phy0: Atheros AR9271 Rev:1 [ 290.612419] ath9k_htc 1-14:1.0 wlp3s0f0u14: renamed from wlan0 [ 290.614453] Adding 16777212k swap on /dev/mapper/vg0-swap. Priority:-2 extents:1 across:16777212k [ 290.686035] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 290.759235] [drm] ib test on ring 6 succeeded [ 290.792281] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 290.861067] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 290.980019] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 291.094878] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 291.264231] [drm] ib test on ring 7 succeeded [ 291.267068] [drm] Radeon Display Connectors [ 291.267071] [drm] Connector 0: [ 291.267072] [drm] DP-1 [ 291.267074] [drm] HPD4 [ 291.267077] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 291.267078] [drm] Encoders: [ 291.267080] [drm] DFP1: INTERNAL_UNIPHY2 [ 291.267081] [drm] Connector 1: [ 291.267082] [drm] HDMI-A-1 [ 291.267083] [drm] HPD5 [ 291.267085] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 291.267087] [drm] Encoders: [ 291.267088] [drm] DFP2: INTERNAL_UNIPHY2 [ 291.267089] [drm] Connector 2: [ 291.267090] [drm] DVI-I-1 [ 291.267092] [drm] HPD6 [ 291.267094] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 291.267095] [drm] Encoders: [ 291.267096] [drm] DFP3: INTERNAL_UNIPHY [ 291.267098] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 291.267099] [drm] Connector 3: [ 291.267100] [drm] DVI-D-1 [ 291.267101] [drm] HPD1 [ 291.267103] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 291.267105] [drm] Encoders: [ 291.267106] [drm] DFP4: INTERNAL_UNIPHY1 [ 291.343395] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD [ 291.370826] [drm] fb mappable at 0xE05D8000 [ 291.370832] [drm] vram apper at 0xE0000000 [ 291.370833] [drm] size 8294400 [ 291.370834] [drm] fb depth is 24 [ 291.370834] [drm] pitch is 7680 [ 291.371230] fbcon: radeondrmfb (fb0) is primary device [ 291.414296] Console: switching to colour frame buffer device 240x67 [ 291.419105] radeon 0000:2e:00.0: fb0: radeondrmfb frame buffer device [ 291.437312] [drm] Initialized radeon 2.50.0 20080528 for 0000:2e:00.0 on minor 0 [ 291.439016] udevd (2397) used greatest stack depth: 10816 bytes left [ 310.753220] iwlwifi 0000:27:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 310.805845] iwlwifi 0000:27:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 310.825181] iwlwifi 0000:27:00.0: base HW address: 34:41:5d:0f:99:b6 [ 310.864331] ieee80211 phy1: Selected rate control algorithm 'iwl-mvm-rs' [ 310.865268] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 310.865384] thermal thermal_zone0: failed to read out thermal zone (-61) [ 310.866890] iwlwifi 0000:27:00.0 wlp39s0: renamed from wlan0 [ 310.952651] IPv6: ADDRCONF(NETDEV_UP): enp43s0: link is not ready [ 311.104802] r8169 0000:2b:00.0 enp43s0: link down [ 311.104919] r8169 0000:2b:00.0 enp43s0: link down [ 311.104990] IPv6: ADDRCONF(NETDEV_UP): enp43s0: link is not ready [ 311.107544] IPv6: ADDRCONF(NETDEV_UP): enp45s0: link is not ready [ 311.108688] ================================================================================ [ 311.108697] UBSAN: Undefined behaviour in /usr/src/linux-4.14.96-gentoo/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:192:41 [ 311.108698] load of address ffffa65d83663646 with insufficient space [ 311.108699] for an object of type 'u32' [ 311.108701] CPU: 0 PID: 3570 Comm: NetworkManager Not tainted 4.14.96-gentoo-debug #1 [ 311.108701] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X470 Taichi Ultimate, BIOS P1.20 04/17/2018 [ 311.108702] Call Trace: [ 311.108707] dump_stack+0x86/0xcf [ 311.108711] ubsan_epilogue+0x9/0x40 [ 311.108712] ubsan_type_mismatch_common+0xa1/0x180 [ 311.108714] __ubsan_handle_type_mismatch+0x2a/0x30 [ 311.108719] hw_atl_b0_hw_rss_set+0x216/0x290 [atlantic] [ 311.108724] hw_atl_b0_hw_init+0x391/0x650 [atlantic] [ 311.108727] ? hw_atl_b0_hw_rss_hash_set+0x160/0x160 [atlantic] [ 311.108730] aq_nic_init+0x82/0x130 [atlantic] [ 311.108733] aq_ndev_open+0x1a/0x50 [atlantic] [ 311.108736] __dev_open+0xbe/0x180 [ 311.108737] ? __dev_change_flags+0x9b/0x280 [ 311.108739] __dev_change_flags+0x1ed/0x280 [ 311.108741] dev_change_flags+0x3c/0xa0 [ 311.108744] do_setlink+0x82f/0x1a60 [ 311.108746] ? __lock_acquire+0x286/0x1c50 [ 311.108748] ? __lock_acquire+0x286/0x1c50 [ 311.108749] ? mark_held_locks+0x6f/0xd0 [ 311.108752] ? __lock_acquire+0x286/0x1c50 [ 311.108753] ? __lock_acquire+0x286/0x1c50 [ 311.108755] ? nla_parse+0x40/0x1d0 [ 311.108757] rtnl_newlink+0x738/0xd40 [ 311.108758] ? rtnl_newlink+0x115/0xd40 [ 311.108772] rtnetlink_rcv_msg+0x4af/0xad0 [ 311.108773] ? rtnetlink_rcv_msg+0xaa/0xad0 [ 311.108776] ? netlink_seq_start+0x100/0x100 [ 311.108778] ? rtnl_dump_ifinfo+0x540/0x540 [ 311.108779] netlink_rcv_skb+0x43/0x150 [ 311.108783] netlink_unicast+0x1a7/0x2d0 [ 311.108785] netlink_sendmsg+0x4a4/0x690 [ 311.108790] sock_sendmsg+0x55/0xb0 [ 311.108792] ___sys_sendmsg+0x31e/0x460 [ 311.108796] ? __fget+0x15b/0x370 [ 311.108800] ? __fget_light+0xa0/0x110 [ 311.108803] __sys_sendmsg+0x47/0x80 [ 311.108807] do_syscall_64+0x83/0x260 [ 311.108809] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 311.108811] RIP: 0033:0x7f76a1a28669 [ 311.108812] RSP: 002b:00007ffea3f7c040 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 311.108814] RAX: ffffffffffffffda RBX: 000056157388b700 RCX: 00007f76a1a28669 [ 311.108815] RDX: 0000000000000000 RSI: 00007ffea3f7c0a0 RDI: 0000000000000008 [ 311.108816] RBP: 00007ffea3f7c0a0 R08: 0000000000000000 R09: 0000000000000000 [ 311.108816] R10: 00007f76a1a0eca0 R11: 0000000000000293 R12: 0000561573979300 [ 311.108817] R13: 0000000000000000 R14: 00007ffea3f7c258 R15: 00007ffea3f7c24c [ 311.108821] ================================================================================ [ 311.108821] ================================================================================ [ 311.108822] UBSAN: Undefined behaviour in /usr/src/linux-4.14.96-gentoo/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:192:41 [ 311.108823] store to address ffffa65d83663646 with insufficient space [ 311.108824] for an object of type 'u32' [ 311.108825] CPU: 0 PID: 3570 Comm: NetworkManager Not tainted 4.14.96-gentoo-debug #1 [ 311.108826] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X470 Taichi Ultimate, BIOS P1.20 04/17/2018 [ 311.108826] Call Trace: [ 311.108827] dump_stack+0x86/0xcf [ 311.108829] ubsan_epilogue+0x9/0x40 [ 311.108831] ubsan_type_mismatch_common+0xa1/0x180 [ 311.108833] __ubsan_handle_type_mismatch+0x2a/0x30 [ 311.108836] hw_atl_b0_hw_rss_set+0x1dc/0x290 [atlantic] [ 311.108841] hw_atl_b0_hw_init+0x391/0x650 [atlantic] [ 311.108844] ? hw_atl_b0_hw_rss_hash_set+0x160/0x160 [atlantic] [ 311.108846] aq_nic_init+0x82/0x130 [atlantic] [ 311.108850] aq_ndev_open+0x1a/0x50 [atlantic] [ 311.108851] __dev_open+0xbe/0x180 [ 311.108852] ? __dev_change_flags+0x9b/0x280 [ 311.108854] __dev_change_flags+0x1ed/0x280 [ 311.108856] dev_change_flags+0x3c/0xa0 [ 311.108858] do_setlink+0x82f/0x1a60 [ 311.108860] ? __lock_acquire+0x286/0x1c50 [ 311.108861] ? __lock_acquire+0x286/0x1c50 [ 311.108863] ? mark_held_locks+0x6f/0xd0 [ 311.108865] ? __lock_acquire+0x286/0x1c50 [ 311.108867] ? __lock_acquire+0x286/0x1c50 [ 311.108868] ? nla_parse+0x40/0x1d0 [ 311.108870] rtnl_newlink+0x738/0xd40 [ 311.108871] ? rtnl_newlink+0x115/0xd40 [ 311.108885] rtnetlink_rcv_msg+0x4af/0xad0 [ 311.108886] ? rtnetlink_rcv_msg+0xaa/0xad0 [ 311.108888] ? netlink_seq_start+0x100/0x100 [ 311.108890] ? rtnl_dump_ifinfo+0x540/0x540 [ 311.108891] netlink_rcv_skb+0x43/0x150 [ 311.108895] netlink_unicast+0x1a7/0x2d0 [ 311.108897] netlink_sendmsg+0x4a4/0x690 [ 311.108900] sock_sendmsg+0x55/0xb0 [ 311.108902] ___sys_sendmsg+0x31e/0x460 [ 311.108906] ? __fget+0x15b/0x370 [ 311.108910] ? __fget_light+0xa0/0x110 [ 311.108912] __sys_sendmsg+0x47/0x80 [ 311.108916] do_syscall_64+0x83/0x260 [ 311.108917] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 311.108918] RIP: 0033:0x7f76a1a28669 [ 311.108919] RSP: 002b:00007ffea3f7c040 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 311.108920] RAX: ffffffffffffffda RBX: 000056157388b700 RCX: 00007f76a1a28669 [ 311.108921] RDX: 0000000000000000 RSI: 00007ffea3f7c0a0 RDI: 0000000000000008 [ 311.108922] RBP: 00007ffea3f7c0a0 R08: 0000000000000000 R09: 0000000000000000 [ 311.108923] R10: 00007f76a1a0eca0 R11: 0000000000000293 R12: 0000561573979300 [ 311.108923] R13: 0000000000000000 R14: 00007ffea3f7c258 R15: 00007ffea3f7c24c [ 311.108927] ================================================================================ [ 311.113936] IPv6: ADDRCONF(NETDEV_UP): enp45s0: link is not ready [ 311.118072] IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready [ 311.192976] IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready [ 311.282017] IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready [ 311.285313] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 311.418318] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 311.590682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 311.665131] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 311.728935] IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready [ 313.236250] r8169 0000:2b:00.0 enp43s0: link up [ 313.236277] IPv6: ADDRCONF(NETDEV_CHANGE): enp43s0: link becomes ready [ 315.167202] atlantic: link change old 0 new 100 [ 315.167625] IPv6: ADDRCONF(NETDEV_CHANGE): enp45s0: link becomes ready [ 323.812264] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 330.840219] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 330.977388] elogind-daemon[4380]: New seat seat0. [ 330.977961] elogind-daemon[4380]: Watching system buttons on /dev/input/event1 (Power Button) [ 330.978040] elogind-daemon[4380]: Watching system buttons on /dev/input/event0 (Power Button) [ 330.978140] elogind-daemon[4380]: Watching system buttons on /dev/input/event12 (DELL Dell USB Entry Keyboard) [ 353.864265] IPv6: ADDRCONF(NETDEV_UP): wlp39s0: link is not ready [ 357.061736] wlp39s0: authenticate with 94:10:3e:07:b9:75 [ 357.066479] wlp39s0: send auth to 94:10:3e:07:b9:75 (try 1/3) [ 357.067587] wlp39s0: authenticated [ 357.069298] wlp39s0: associate with 94:10:3e:07:b9:75 (try 1/3) [ 357.070214] wlp39s0: RX AssocResp from 94:10:3e:07:b9:75 (capab=0x1011 status=0 aid=3) [ 357.072231] wlp39s0: associated [ 357.098394] IPv6: ADDRCONF(NETDEV_CHANGE): wlp39s0: link becomes ready [ 637.170104] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 952.174720] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready [ 1267.170474] IPv6: ADDRCONF(NETDEV_UP): wlp3s0f0u14: link is not ready