zeta /home/jlpoole # dmesg [ 0.000000] Linux version 4.19.23-gentoo (root@zeta) (gcc version 7.3.0 (Gentoo 7.3.0-r3 p1.4)) #8 SMP Mon Mar 4 20:48:52 PST 2019 [ 0.000000] Command line: placeholder root=/dev/sda4 ro softlevel=xen video=vesa:off video=efifb:1024x768 xencons=xvc console=tty0 console=hvc0 showopts noquiet log_buf_len=10M print_fatal_signals=1 earlyprintk=xen,keep loglvl=all acpi=off [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000007e16cfff] usable [ 0.000000] Xen: [mem 0x000000007e16d000-0x000000007eba3fff] reserved [ 0.000000] Xen: [mem 0x000000007eba4000-0x000000007ed11fff] usable [ 0.000000] Xen: [mem 0x000000007ed12000-0x000000007f28cfff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007f28d000-0x000000007f5f2fff] reserved [ 0.000000] Xen: [mem 0x000000007f5f3000-0x000000007f647fff] type 20 [ 0.000000] Xen: [mem 0x000000007f648000-0x000000007f7fffff] usable [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed01000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] Xen: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feffffff] reserved [ 0.000000] Xen: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000fefffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018A-TN4/A1SAi, BIOS 1.1a 08/27/2015 [ 0.000000] Hypervisor detected: Xen PV [ 0.009081] tsc: Fast TSC calibration failed [ 0.009091] tsc: Detected 2400.050 MHz processor [ 0.009446] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009452] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.009464] last_pfn = 0xff0000 max_arch_pfn = 0x400000000 [ 0.009467] Disabled [ 0.009471] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.009480] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.009484] last_pfn = 0x7f800 max_arch_pfn = 0x400000000 [ 0.009535] Base memory trampoline at [(____ptrval____)] 9a000 size 24576 [ 0.009551] Kernel/User page tables isolation: disabled on XEN PV. [ 0.011142] BRK [0x02801000, 0x02801fff] PGTABLE [ 0.011146] BRK [0x02802000, 0x02802fff] PGTABLE [ 0.013096] BRK [0x02803000, 0x02803fff] PGTABLE [ 0.013975] BRK [0x02804000, 0x02804fff] PGTABLE [ 0.014852] BRK [0x02805000, 0x02805fff] PGTABLE [ 0.015743] BRK [0x02806000, 0x02806fff] PGTABLE [ 0.016622] BRK [0x02807000, 0x02807fff] PGTABLE [ 0.017515] BRK [0x02808000, 0x02808fff] PGTABLE [ 0.018386] BRK [0x02809000, 0x02809fff] PGTABLE [ 0.019259] BRK [0x0280a000, 0x0280afff] PGTABLE [ 0.020153] BRK [0x0280b000, 0x0280bfff] PGTABLE [ 0.021026] BRK [0x0280c000, 0x0280cfff] PGTABLE [ 28.809327] log_buf_len: 16777216 bytes [ 28.809334] early log buf free: 520896(99%) [ 28.809339] RAMDISK: [mem 0x04000000-0x04881fff] [ 29.385729] Zone ranges: [ 29.385737] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 29.385742] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 29.385746] Normal [mem 0x0000000100000000-0x0000000fefffffff] [ 29.385750] Movable zone start for each node [ 29.385752] Early memory node ranges [ 29.385755] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 29.385758] node 0: [mem 0x0000000000100000-0x000000007e16cfff] [ 29.385761] node 0: [mem 0x000000007eba4000-0x000000007ed11fff] [ 29.385764] node 0: [mem 0x000000007f648000-0x000000007f7fffff] [ 29.385766] node 0: [mem 0x0000000100000000-0x0000000fefffffff] [ 29.385770] Reserved but unavailable: 1 pages [ 29.385773] Initmem setup node 0 [mem 0x0000000000001000-0x0000000fefffffff] [ 29.385778] On node 0 totalpages: 16180274 [ 29.385780] DMA zone: 64 pages used for memmap [ 29.385782] DMA zone: 21 pages reserved [ 29.385784] DMA zone: 3999 pages, LIFO batch:0 [ 29.385920] DMA32 zone: 8019 pages used for memmap [ 29.385922] DMA32 zone: 513171 pages, LIFO batch:63 [ 29.406630] Normal zone: 244736 pages used for memmap [ 29.406635] Normal zone: 15663104 pages, LIFO batch:63 [ 29.949853] p2m virtual area at (____ptrval____), size is 8000000 [ 31.670326] Remapped 531405 page(s) [ 31.671397] smpboot: Boot CPU (id 255) not listed by BIOS [ 31.671402] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 31.671430] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 31.671435] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 31.671439] PM: Registered nosave memory: [mem 0x7e16d000-0x7eba3fff] [ 31.671444] PM: Registered nosave memory: [mem 0x7ed12000-0x7f28cfff] [ 31.671446] PM: Registered nosave memory: [mem 0x7f28d000-0x7f5f2fff] [ 31.671449] PM: Registered nosave memory: [mem 0x7f5f3000-0x7f647fff] [ 31.671453] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff] [ 31.671456] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 31.671459] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff] [ 31.671461] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 31.671464] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 31.671466] PM: Registered nosave memory: [mem 0xfed01000-0xfed03fff] [ 31.671469] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff] [ 31.671472] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 31.671474] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff] [ 31.671477] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff] [ 31.671479] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff] [ 31.671482] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 31.671484] PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff] [ 31.671487] PM: Registered nosave memory: [mem 0xfee00000-0xfeffffff] [ 31.671489] PM: Registered nosave memory: [mem 0xff000000-0xff7fffff] [ 31.671492] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 31.671496] [mem 0x7f800000-0xdfffffff] available for PCI devices [ 31.671502] Booting paravirtualized kernel on Xen [ 31.671506] Xen version: 4.12.0-rc (preserve-AD) [ 31.671512] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 31.879150] random: get_random_bytes called from start_kernel+0x9b/0x4e7 with crng_init=0 [ 31.879172] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 [ 31.879735] percpu: Embedded 45 pages/cpu @(____ptrval____) s145368 r8192 d30760 u2097152 [ 31.879753] pcpu-alloc: s145368 r8192 d30760 u2097152 alloc=1*2097152 [ 31.879756] pcpu-alloc: [0] 0 [ 31.880409] xen: PV spinlocks disabled [ 31.880419] Built 1 zonelists, mobility grouping on. Total pages: 15927434 [ 31.880426] Kernel command line: root=PARTUUID=aed86592-c8ee-4414-a83b-8e6e33b2f95f placeholder root=/dev/sda4 ro softlevel=xen video=vesa:off video=efifb:1024x768 xencons=xvc console=tty0 console=hvc0 showopts noquiet log_buf_len=10M print_fatal_signals=1 earlyprintk=xen,keep loglvl=all acpi=off [ 31.898009] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 31.906328] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 31.982620] software IO TLB: mapped [mem 0xfb2e00000-0xfb6e00000] (64MB) [ 32.370046] Memory: 62405960K/64721096K available (10252K kernel code, 2112K rwdata, 3184K rodata, 1436K init, 1644K bss, 2315136K reserved, 0K cma-reserved) [ 32.371409] rcu: Hierarchical RCU implementation. [ 32.371413] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1. [ 32.371416] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 32.374904] Using NULL legacy PIC [ 32.374910] NR_IRQS: 524544, nr_irqs: 32, preallocated irqs: 0 [ 32.374952] xen:events: Using FIFO-based ABI [ 32.375537] Console: colour dummy device 80x25 [ 32.376382] console [tty0] enabled [ 33.016317] console [hvc0] enabled [ 33.020078] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 33.030129] Xen: using vcpuop timer interface [ 33.030139] installing Xen timer for CPU 0 [ 33.034801] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229866cd93e, max_idle_ns: 440795292764 ns [ 33.045292] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.10 BogoMIPS (lpj=2400050) [ 33.046210] pid_max: default: 32768 minimum: 301 [ 33.047469] Security Framework initialized [ 33.048211] SELinux: Initializing. [ 33.049533] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.050481] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.051660] mce: CPU supports 2 MCE banks [ 33.052248] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 33.053198] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 33.054210] Spectre V2 : Mitigation: Full generic retpoline [ 33.055196] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 33.159921] Freeing SMP alternatives memory: 28K [ 33.162729] VPMU disabled by hypervisor. [ 33.163700] Performance Events: unsupported p6 CPU model 77 no PMU driver, software events only. [ 33.164424] rcu: Hierarchical SRCU implementation. [ 33.166064] NMI watchdog: Perf NMI watchdog permanently disabled [ 33.166387] smp: Bringing up secondary CPUs ... [ 33.167212] smp: Brought up 1 node, 1 CPU [ 33.168199] smpboot: Max logical packages: 1 [ 33.175141] devtmpfs: initialized [ 33.175308] x86/mm: Memory block size: 128MB [ 33.187319] PM: Registering ACPI NVS region [mem 0x7ed12000-0x7f28cfff] (5746688 bytes) [ 33.188518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 33.189221] futex hash table entries: 256 (order: 2, 16384 bytes) [ 33.190725] NET: Registered protocol family 16 [ 33.191255] xen:grant_table: Grant tables using version 1 layout [ 33.192234] Grant table initialized [ 33.193405] audit: initializing netlink subsys (disabled) [ 33.194565] audit: type=2000 audit(1552668046.925:1): state=initialized audit_enabled=0 res=1 [ 33.195914] PCI: Using configuration type 1 for base access [ 33.200146] ACPI: Interpreter disabled. [ 33.200222] xen:balloon: Initialising balloon driver [ 33.221419] vgaarb: loaded [ 33.222359] SCSI subsystem initialized [ 33.223339] libata version 3.00 loaded. [ 33.223395] usbcore: registered new interface driver usbfs [ 33.224253] usbcore: registered new interface driver hub [ 33.225291] usbcore: registered new device driver usb [ 33.226237] pps_core: LinuxPPS API ver. 1 registered [ 33.227198] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 33.228239] PTP clock support registered [ 33.229398] EDAC MC: Ver: 3.0.0 [ 33.230409] PCI: Probing PCI hardware [ 33.231215] PCI: root bus 00: using default resources [ 33.231218] PCI: Probing PCI hardware (bus 00) [ 33.231280] PCI host bridge to bus 0000:00 [ 33.232203] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 33.233217] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 33.234255] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 33.235243] pci 0000:00:00.0: [8086:1f01] type 00 class 0x060000 [ 33.236299] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400 [ 33.236397] pci 0000:00:01.0: reg 0x10: [mem 0xdf2c0000-0xdf2dffff 64bit] [ 33.236485] pci 0000:00:01.0: enabling Extended Tags [ 33.237405] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 33.238258] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400 [ 33.238353] pci 0000:00:02.0: reg 0x10: [mem 0xdf2a0000-0xdf2bffff 64bit] [ 33.238441] pci 0000:00:02.0: enabling Extended Tags [ 33.239433] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 33.240265] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400 [ 33.240367] pci 0000:00:03.0: reg 0x10: [mem 0xdf280000-0xdf29ffff 64bit] [ 33.240455] pci 0000:00:03.0: enabling Extended Tags [ 33.241401] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 33.242361] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000 [ 33.243256] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600 [ 33.243628] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 33.244289] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000 [ 33.244374] pci 0000:00:13.0: reg 0x10: [mem 0xdf2f4000-0xdf2f43ff 64bit] [ 33.245320] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000 [ 33.245417] pci 0000:00:14.0: reg 0x10: [mem 0xdf260000-0xdf27ffff 64bit] [ 33.245458] pci 0000:00:14.0: reg 0x18: [io 0xe0c0-0xe0df] [ 33.245553] pci 0000:00:14.0: reg 0x20: [mem 0xdf2ec000-0xdf2effff 64bit] [ 33.245810] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 33.246286] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000 [ 33.246379] pci 0000:00:14.1: reg 0x10: [mem 0xdf240000-0xdf25ffff 64bit] [ 33.246419] pci 0000:00:14.1: reg 0x18: [io 0xe0a0-0xe0bf] [ 33.246514] pci 0000:00:14.1: reg 0x20: [mem 0xdf2e8000-0xdf2ebfff 64bit] [ 33.246767] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold [ 33.247273] pci 0000:00:14.2: [8086:1f41] type 00 class 0x020000 [ 33.247370] pci 0000:00:14.2: reg 0x10: [mem 0xdf220000-0xdf23ffff 64bit] [ 33.247410] pci 0000:00:14.2: reg 0x18: [io 0xe080-0xe09f] [ 33.247505] pci 0000:00:14.2: reg 0x20: [mem 0xdf2e4000-0xdf2e7fff 64bit] [ 33.247756] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 33.248318] pci 0000:00:14.3: [8086:1f41] type 00 class 0x020000 [ 33.248426] pci 0000:00:14.3: reg 0x10: [mem 0xdf200000-0xdf21ffff 64bit] [ 33.248467] pci 0000:00:14.3: reg 0x18: [io 0xe060-0xe07f] [ 33.248562] pci 0000:00:14.3: reg 0x20: [mem 0xdf2e0000-0xdf2e3fff 64bit] [ 33.248819] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 33.249289] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320 [ 33.249399] pci 0000:00:16.0: reg 0x10: [mem 0xdf2f3000-0xdf2f33ff] [ 33.249802] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 33.250259] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601 [ 33.250359] pci 0000:00:17.0: reg 0x10: [io 0xe150-0xe157] [ 33.250399] pci 0000:00:17.0: reg 0x14: [io 0xe140-0xe143] [ 33.250439] pci 0000:00:17.0: reg 0x18: [io 0xe130-0xe137] [ 33.250478] pci 0000:00:17.0: reg 0x1c: [io 0xe120-0xe123] [ 33.250517] pci 0000:00:17.0: reg 0x20: [io 0xe040-0xe05f] [ 33.250557] pci 0000:00:17.0: reg 0x24: [mem 0xdf2f2000-0xdf2f27ff] [ 33.250760] pci 0000:00:17.0: PME# supported from D3hot [ 33.251304] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601 [ 33.251405] pci 0000:00:18.0: reg 0x10: [io 0xe110-0xe117] [ 33.251445] pci 0000:00:18.0: reg 0x14: [io 0xe100-0xe103] [ 33.251484] pci 0000:00:18.0: reg 0x18: [io 0xe0f0-0xe0f7] [ 33.251524] pci 0000:00:18.0: reg 0x1c: [io 0xe0e0-0xe0e3] [ 33.251563] pci 0000:00:18.0: reg 0x20: [io 0xe020-0xe03f] [ 33.251602] pci 0000:00:18.0: reg 0x24: [mem 0xdf2f1000-0xdf2f17ff] [ 33.251811] pci 0000:00:18.0: PME# supported from D3hot [ 33.252285] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100 [ 33.253255] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500 [ 33.253333] pci 0000:00:1f.3: reg 0x10: [mem 0xdf2f0000-0xdf2f001f] [ 33.253439] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f] [ 33.254509] pci 0000:01:00.0: [1a03:1150] type 01 class 0x060400 [ 33.254729] pci 0000:01:00.0: enabling Extended Tags [ 33.255415] pci 0000:01:00.0: supports D1 D2 [ 33.255419] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 33.256218] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 33.257267] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 33.258214] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 33.258229] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 33.258428] pci_bus 0000:02: extended config space not accessible [ 33.259324] pci 0000:02:00.0: [1a03:2000] type 00 class 0x030000 [ 33.259409] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 33.259454] pci 0000:02:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff] [ 33.259498] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd07f] [ 33.259833] pci 0000:02:00.0: supports D1 D2 [ 33.259836] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 33.260220] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 33.261188] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 33.261438] pci 0000:01:00.0: PCI bridge to [bus 02] [ 33.262227] pci 0000:01:00.0: bridge window [io 0xd000-0xdfff] [ 33.262243] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff] [ 33.262548] pci 0000:03:00.0: [1912:0014] type 00 class 0x0c0330 [ 33.262649] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit] [ 33.263085] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 33.264346] pci 0000:00:02.0: PCI bridge to [bus 03] [ 33.265223] pci 0000:00:02.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 33.265435] pci 0000:00:03.0: PCI bridge to [bus 04] [ 33.266343] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04 [ 33.266627] pci 0000:00:1f.0: default IRQ router [8086:1f38] [ 33.267347] PCI: pci_cache_line_size set to 64 bytes [ 33.267570] e820: reserve RAM buffer [mem 0x7e16d000-0x7fffffff] [ 33.267574] e820: reserve RAM buffer [mem 0x7ed12000-0x7fffffff] [ 33.267578] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff] [ 33.267841] NetLabel: Initializing [ 33.268198] NetLabel: domain hash size = 128 [ 33.269197] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 33.270255] NetLabel: unlabeled traffic allowed by default [ 33.271549] clocksource: Switched to clocksource tsc-early [ 33.304204] random: fast init done [ 33.307887] VFS: Disk quotas dquot_6.6.0 [ 33.312060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 33.318951] hugetlbfs: disabling because there are no supported hugepage sizes [ 33.330907] pnp: PnP ACPI: disabled [ 33.334466] pci 0000:01:00.0: PCI bridge to [bus 02] [ 33.339297] pci 0000:01:00.0: bridge window [io 0xd000-0xdfff] [ 33.345764] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff] [ 33.352582] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 33.357843] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 33.364254] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 33.371080] pci 0000:00:02.0: PCI bridge to [bus 03] [ 33.376372] pci 0000:00:02.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 33.383185] pci 0000:00:03.0: PCI bridge to [bus 04] [ 33.388231] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 33.388235] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 33.388238] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 33.388241] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff] [ 33.388244] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 33.388247] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff] [ 33.388250] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff] [ 33.388398] NET: Registered protocol family 2 [ 33.393252] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes) [ 33.401390] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 33.410408] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 33.417747] TCP: Hash tables configured (established 524288 bind 65536) [ 33.424683] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 33.431300] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 33.438410] NET: Registered protocol family 1 [ 33.459331] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c0 took 15823 usecs [ 33.466665] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 33.475450] PCI: CLS 64 bytes, default 64 [ 33.475562] Trying to unpack rootfs image as initramfs... [ 35.037887] Freeing initrd memory: 8712K [ 35.042331] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 35.050721] Initialise system trusted keyrings [ 35.055148] workingset: timestamp_bits=46 max_order=24 bucket_order=0 [ 35.062302] pstore: using deflate compression [ 35.068353] NET: Registered protocol family 38 [ 35.072990] Key type asymmetric registered [ 35.077114] Asymmetric key parser 'x509' registered [ 35.082032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 35.089824] io scheduler noop registered [ 35.093633] io scheduler deadline registered [ 35.098016] io scheduler cfq registered (default) [ 35.102729] io scheduler mq-deadline registered [ 35.107580] io scheduler kyber registered [ 35.112970] pcieport 0000:00:01.0: Signaling PME with IRQ 8 [ 35.118507] pcieport 0000:00:02.0: Signaling PME with IRQ 9 [ 35.124450] pcieport 0000:00:03.0: Signaling PME with IRQ 10 [ 35.130711] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 35.412406] serial8250: ttyS1 at I/O 0x2f8 (irq = 0, base_baud = 115200) is a 16550A [ 35.420823] Linux agpgart interface v0.103 [ 35.425331] intel_idle: MWAIT substates: 0x3000020 [ 35.425334] intel_idle: v0.4.1 model 0x4D [ 35.425346] intel_idle: intel_idle yielding to none [ 35.425351] version 39.2 [ 35.427772] IPMI System Interface driver. [ 35.431836] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 35.438231] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 35.444528] ipmi_si: Adding SMBIOS-specified kcs state machine [ 35.450475] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 35.492274] ipmi_si dmi-ipmi-si.0: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 35.518496] ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x002a7c, prod_id: 0x0813, dev_id: 0x20) [ 35.548443] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized [ 35.555138] xen:xen_evtchn: Event-channel device installed [ 35.560953] xen_mcelog: /dev/mcelog registered by Xen [ 35.572156] brd: module loaded [ 35.578655] loop: module loaded [ 35.581670] Invalid max_queues (4), will use default max: 1. [ 35.588334] xen_netfront: Initialising Xen virtual ethernet driver [ 35.594510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 35.601264] ehci-pci: EHCI PCI platform driver [ 35.605879] ehci-pci 0000:00:16.0: EHCI Host Controller [ 35.611118] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 [ 35.618773] ehci-pci 0000:00:16.0: debug port 2 [ 35.627249] ehci-pci 0000:00:16.0: cache line size of 64 is not supported [ 35.627256] genirq: Flags mismatch irq 7. 00000080 (ehci_hcd:usb1) vs. 00000000 (xen-pcpu) [ 35.628194] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.23-gentoo #8 [ 35.628194] Hardware name: Supermicro SYS-5018A-TN4/A1SAi, BIOS 1.1a 08/27/2015 [ 35.628194] Call Trace: [ 35.628194] dump_stack+0x85/0xcb [ 35.628194] __setup_irq+0x6be/0x700 [ 35.628194] request_threaded_irq+0xf5/0x160 [ 35.628194] usb_add_hcd+0x502/0x8b0 [ 35.628194] usb_hcd_pci_probe+0x321/0x470 [ 35.628194] ? _raw_spin_unlock_irqrestore+0x22/0x40 [ 35.628194] pci_device_probe+0xcd/0x150 [ 35.628194] really_probe+0x2a7/0x3c0 [ 35.628194] ? set_debug_rodata+0x11/0x11 [ 35.628194] driver_probe_device+0x10f/0x120 [ 35.628194] __driver_attach+0xdc/0x100 [ 35.628194] ? driver_probe_device+0x120/0x120 [ 35.628194] bus_for_each_dev+0x76/0xc0 [ 35.628194] bus_add_driver+0x161/0x260 [ 35.628194] ? ehci_hcd_init+0xaa/0xaa [ 35.628194] driver_register+0x5b/0xe0 [ 35.628194] ? ehci_hcd_init+0xaa/0xaa [ 35.628194] do_one_initcall+0x46/0x1d0 [ 35.628194] kernel_init_freeable+0x23f/0x2d6 [ 35.628194] ? rest_init+0xb0/0xb0 [ 35.628194] kernel_init+0xa/0x100 [ 35.628194] ret_from_fork+0x3a/0x50 [ 35.740388] ehci-pci 0000:00:16.0: request interrupt 7 failed [ 35.746448] ehci-pci 0000:00:16.0: USB bus 1 deregistered [ 35.752052] ehci-pci 0000:00:16.0: init 0000:00:16.0 fail, -16 [ 35.757789] ehci-pci: probe of 0000:00:16.0 failed with error -16 [ 35.764236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 35.770444] ohci-pci: OHCI PCI platform driver [ 35.774907] uhci_hcd: USB Universal Host Controller Interface driver [ 35.781655] i8042: PNP: No PS/2 controller found. [ 35.786283] i8042: Probing ports directly. [ 36.910493] i8042: No controller found [ 36.914435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229866cd93e, max_idle_ns: 440795292764 ns [ 36.924478] clocksource: Switched to clocksource tsc [ 36.929899] mousedev: PS/2 mouse device common for all mice [ 36.935768] rtc_cmos rtc_cmos: registered as rtc0 [ 36.940370] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 36.947116] hidraw: raw HID events driver (C) Jiri Kosina [ 36.952538] usbcore: registered new interface driver usbhid [ 36.958079] usbhid: USB HID core driver [ 36.962322] drop_monitor: Initializing network drop monitor service [ 36.968621] Initializing XFRM netlink socket [ 36.972862] NET: Registered protocol family 17 [ 36.977963] sched_clock: Marking stable (36308381424, 669222156)->(37370016443, -392412863) [ 36.986776] registered taskstats version 1 [ 36.990729] Loading compiled-in X.509 certificates [ 37.028985] Loaded X.509 cert 'Build time autogenerated kernel key: 72a4c23270e115b701d06446f06b55700a28d26c' [ 37.038855] ima: No TPM chip found, activating TPM-bypass! [ 37.044649] ima: Allocated hash algorithm: sha1 [ 37.049890] rtc_cmos rtc_cmos: setting system clock to 2019-03-15 16:40:50 UTC (1552668050) [ 37.060100] Freeing unused kernel image memory: 1436K [ 37.065279] Write protecting the kernel read-only data: 16384k [ 37.092730] Freeing unused kernel image memory: 2016K [ 37.098752] Freeing unused kernel image memory: 912K [ 37.104027] Run /init as init process [ 43.515929] ahci 0000:00:17.0: version 3.0 [ 43.526304] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 43.526309] ahci 0000:00:17.0: flags: 64bit ncq led clo pio sxs deso sadm sds apst [ 43.545720] scsi host0: ahci [ 43.553255] scsi host1: ahci [ 43.587095] scsi host2: ahci [ 43.596295] scsi host3: ahci [ 43.596458] ata1: SATA max UDMA/133 abar m2048@0xdf2f2000 port 0xdf2f2100 irq 13 [ 43.596461] ata2: SATA max UDMA/133 abar m2048@0xdf2f2000 port 0xdf2f2180 irq 13 [ 43.596464] ata3: SATA max UDMA/133 abar m2048@0xdf2f2000 port 0xdf2f2200 irq 13 [ 43.596467] ata4: SATA max UDMA/133 abar m2048@0xdf2f2000 port 0xdf2f2280 irq 13 [ 43.606870] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 43.606876] ahci 0000:00:18.0: flags: 64bit ncq led clo pio sxs deso sadm sds apst [ 43.614722] scsi host4: ahci [ 43.628416] scsi host5: ahci [ 43.628583] ata5: SATA max UDMA/133 abar m2048@0xdf2f1000 port 0xdf2f1100 irq 14 [ 43.628587] ata6: SATA max UDMA/133 abar m2048@0xdf2f1000 port 0xdf2f1180 irq 14 [ 43.906857] ata1: SATA link down (SStatus 0 SControl 300) [ 43.906886] ata2: SATA link down (SStatus 0 SControl 300) [ 43.914585] ata3: SATA link down (SStatus 0 SControl 300) [ 43.922878] ata4: SATA link down (SStatus 0 SControl 300) [ 43.938844] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 43.946617] ata6: SATA link down (SStatus 0 SControl 300) [ 44.078854] ata5.00: ATA-8: TOSHIBA MG04ACA400E, FP3B, max UDMA/100 [ 44.078858] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 44.080788] ata5.00: configured for UDMA/100 [ 44.081052] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG04ACA4 FP3B PQ: 0 ANSI: 5 [ 44.244239] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 44.244244] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 44.244260] sd 4:0:0:0: [sda] Write Protect is off [ 44.244263] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.244286] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.508983] sda: sda1 sda2 sda3 sda4 sda5 [ 44.509854] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 44.546339] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 45.648717] imm: Version 2.05 (for Linux 2.4.0) [ 45.884952] Fusion MPT base driver 3.04.20 [ 45.884955] Copyright (c) 1999-2008 LSI Corporation [ 45.925153] Fusion MPT SPI Host driver 3.04.20 [ 45.962319] Fusion MPT FC Host driver 3.04.20 [ 46.016129] Fusion MPT SAS Host driver 3.04.20 [ 46.059650] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 46.083660] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 46.107495] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 46.256327] Adaptec aacraid driver 1.2.1[50877]-custom [ 46.303903] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 46.310297] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 46.356667] megasas: 07.706.03.00-rc1 [ 46.414846] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.08-k. [ 46.469842] Emulex LightPulse Fibre Channel SCSI driver 12.0.0.6 [ 46.469844] Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries. [ 46.521717] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 46.579456] mpt3sas version 26.100.00.00 loaded [ 46.777695] usbcore: registered new interface driver usb-storage [ 46.902798] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 46.902960] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 46.916505] xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000410 [ 46.917763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 46.917767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 46.917770] usb usb1: Product: xHCI Host Controller [ 46.917772] usb usb1: Manufacturer: Linux 4.19.23-gentoo xhci-hcd [ 46.917774] usb usb1: SerialNumber: 0000:03:00.0 [ 46.918101] hub 1-0:1.0: USB hub found [ 46.918135] hub 1-0:1.0: 4 ports detected [ 46.918710] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 46.918855] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 46.918864] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 46.918955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 46.919071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 46.919074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 46.919076] usb usb2: Product: xHCI Host Controller [ 46.919079] usb usb2: Manufacturer: Linux 4.19.23-gentoo xhci-hcd [ 46.919081] usb usb2: SerialNumber: 0000:03:00.0 [ 46.919450] hub 2-0:1.0: USB hub found [ 46.919480] hub 2-0:1.0: 4 ports detected [ 47.225220] random: crng init done [ 47.660251] device-mapper: uevent: version 1.0.3 [ 47.660453] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 47.868994] xor: measuring software checksum speed [ 47.878202] prefetch64-sse: 7120.000 MB/sec [ 47.888202] generic_sse: 6484.000 MB/sec [ 47.888205] xor: using function: prefetch64-sse (7120.000 MB/sec) [ 47.894608] async_tx: api initialized (async) [ 47.949848] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 48.038215] raid6: sse2x1 gen() 824 MB/s [ 48.055210] raid6: sse2x1 xor() 2318 MB/s [ 48.072215] raid6: sse2x2 gen() 902 MB/s [ 48.089205] raid6: sse2x2 xor() 2759 MB/s [ 48.106239] raid6: sse2x4 gen() 1250 MB/s [ 48.123205] raid6: sse2x4 xor() 1175 MB/s [ 48.123208] raid6: using algorithm sse2x4 gen() 1250 MB/s [ 48.123210] raid6: .... xor() 1175 MB/s, rmw enabled [ 48.123211] raid6: using ssse3x2 recovery algorithm [ 48.172293] device-mapper: raid: Loading target version 1.14.0 [ 49.297330] Btrfs loaded, crc32c=crc32c-generic [ 49.360576] JFS: nTxBlock = 8192, nTxLock = 65536 [ 49.394244] FS-Cache: Loaded [ 49.428417] RPC: Registered named UNIX socket transport module. [ 49.428420] RPC: Registered udp transport module. [ 49.428421] RPC: Registered tcp transport module. [ 49.428422] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 49.469597] FS-Cache: Netfs 'nfs' registered for caching [ 49.550455] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 49.624962] fuse init (API version 7.27) [ 49.675001] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 49.961442] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 49.961444] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 50.003281] dca service started, version 1.12.1 [ 50.034632] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 50.034635] igb: Copyright (c) 2007-2014 Intel Corporation. [ 50.388474] igb 0000:00:14.0: added PHC on eth0 [ 50.388478] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection [ 50.388554] igb 0000:00:14.0: eth0: PBA No: 010A00-000 [ 50.388557] igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 50.822616] igb 0000:00:14.1: added PHC on eth1 [ 50.822619] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection [ 50.822695] igb 0000:00:14.1: eth1: PBA No: 010A00-000 [ 50.822699] igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 51.254714] igb 0000:00:14.2: added PHC on eth2 [ 51.254718] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection [ 51.254794] igb 0000:00:14.2: eth2: PBA No: 010A00-000 [ 51.254797] igb 0000:00:14.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 51.694494] igb 0000:00:14.3: added PHC on eth3 [ 51.694497] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection [ 51.694573] igb 0000:00:14.3: eth3: PBA No: 010A00-000 [ 51.694576] igb 0000:00:14.3: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 51.815302] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 51.904264] sky2: driver version 1.30 [ 51.975141] VMware vmxnet3 virtual NIC driver - version 1.4.16.0-k-NAPI [ 52.060931] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 52.274036] vxge: Copyright(c) 2002-2010 Exar Corp. [ 52.274039] vxge: Driver version: 2.5.3.22640-k [ 52.406008] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 52.468708] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 52.468711] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 52.494612] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 52.494614] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 56.401682] igb 0000:00:14.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 68.509154] NET: Registered protocol family 10 [ 68.511297] Segment Routing with IPv6 [ 68.669473] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (244) [ 68.670397] EXT4-fs (sda4): INFO: recovery required on readonly filesystem [ 68.670399] EXT4-fs (sda4): write access will be enabled during recovery [ 68.788755] EXT4-fs (sda4): recovery complete [ 68.803158] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 75.074581] udevd[4662]: starting version 3.2.5 [ 75.144655] udevd[4662]: starting eudev-3.2.5 [ 75.825003] udevd[4696]: Error changing net interface name eth0 to enp0s20f0: Device or resource busy [ 75.825040] udevd[4696]: could not rename interface '2' from 'eth0' to 'enp0s20f0': Device or resource busy [ 75.827035] igb 0000:00:14.1 enp0s20f1: renamed from eth1 [ 75.846721] igb 0000:00:14.2 enp0s20f2: renamed from eth2 [ 75.858728] ismt_smbus 0000:00:13.0: enabling device (0000 -> 0002) [ 75.860840] igb 0000:00:14.3 enp0s20f3: renamed from eth3 [ 76.013529] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 76.096133] cryptd: max_cpu_qlen set to 1000 [ 76.333850] Error: Driver 'pcspkr' is already registered, aborting... [ 76.496916] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 76.956735] iTCO_vendor_support: vendor-support=0 [ 76.977901] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 76.977961] iTCO_wdt: Found a Avoton SoC TCO device (Version=3, TCOBASE=0x0460) [ 76.987074] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 76.989001] Error: Driver 'pcspkr' is already registered, aborting... [ 90.395107] EXT4-fs (sda4): re-mounted. Opts: (null) [ 90.999396] Adding 524284k swap on /dev/sda3. Priority:-2 extents:1 across:524284k [ 91.313720] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 96.434988] 8021q: 802.1Q VLAN Support v1.8 [ 96.435005] 8021q: adding VLAN 0 to HW filter on device eth0 [ 96.500301] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 96.510861] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 96.522312] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 96.522317] cfg80211: failed to load regulatory.db [ 97.315404] IPv6: ADDRCONF(NETDEV_UP): enp0s20f1: link is not ready [ 97.315408] 8021q: adding VLAN 0 to HW filter on device enp0s20f1 [ 97.656381] IPv6: ADDRCONF(NETDEV_UP): enp0s20f2: link is not ready [ 97.656386] 8021q: adding VLAN 0 to HW filter on device enp0s20f2 [ 97.993424] IPv6: ADDRCONF(NETDEV_UP): enp0s20f3: link is not ready [ 97.993429] 8021q: adding VLAN 0 to HW filter on device enp0s20f3 [ 97.994757] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 97.994760] 8021q: adding VLAN 0 to HW filter on device bond0 [ 100.228641] igb 0000:00:14.1 enp0s20f1: igb: enp0s20f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 100.228843] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f1: link becomes ready [ 100.857673] igb 0000:00:14.2 enp0s20f2: igb: enp0s20f2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 100.857875] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f2: link becomes ready [ 101.046657] igb 0000:00:14.3 enp0s20f3: igb: enp0s20f3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 101.046858] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f3: link becomes ready [ 102.555030] xen_pciback: backend is vpci zeta /home/jlpoole # date Fri Mar 15 10:15:02 PDT 2019 zeta /home/jlpoole #