CI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:03: ioport range 0xe400-0xe47f could not be reserved pnp: 00:03: ioport range 0xec00-0xec3f has been reserved Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1113592653.812:0): initialized inotify device minor=63 Initializing Cryptographic API lp: driver loaded but no devices found Real Time Clock Driver v1.12 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.0.0 20040925 ACPI: Power Button (FF) [PWRF] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 input: PC Speaker parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport0: Printer, Brother HL-5130 series lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PCI: Enabling device 0000:02:0a.0 (0014 -> 0017) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:0a.0: 3Com PCI 3c905C Tornado at 0xd800. Vers LK1.1.19 PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 1 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IBM-DTLA-305030, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Maxtor 7Y250P0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 60036480 sectors (30738 MB) w/380KiB Cache, CHS=59560/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 hdc: max request size: 1024KiB hdc: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 < hdc5 hdc6 hdc7 > ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 9 (level, low) -> IRQ 9 sym0: <895> rev 0x1 at pci 0000:02:0c.0 irq 9 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: SCAN AT BOOT disabled for targets 9 10 11 12 13 14 15. sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18n Vendor: IBM Model: DNES-318350 Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym0:0:0: tagged command queuing enabled, command queue depth 16. target0:0:0: Beginning Domain Validation target0:0:0: Domain Validation skipping write tests sym0:0: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 31) target0:0:0: Ending Domain Validation Vendor: IBM Model: DDRS-34560 Rev: S97B Type: Direct-Access ANSI SCSI revision: 02 sym0:1:0: tagged command queuing enabled, command queue depth 16. target0:0:1: Beginning Domain Validation target0:0:1: Domain Validation skipping write tests sym0:1: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) target0:0:1: Ending Domain Validation Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 target0:0:2: Beginning Domain Validation target0:0:2: Domain Validation skipping write tests sym0:2: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8) target0:0:2: Ending Domain Validation Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1008 Type: CD-ROM ANSI SCSI revision: 02 target0:0:3: Beginning Domain Validation target0:0:3: Domain Validation skipping write tests sym0:3: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16) target0:0:3: Ending Domain Validation Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 target0:0:4: Beginning Domain Validation target0:0:4: Domain Validation skipping write tests sym0:4: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) target0:0:4: Ending Domain Validation Vendor: IOMEGA Model: ZIP 100 Rev: J.03 Type: Direct-Access ANSI SCSI revision: 02 target0:0:5: Beginning Domain Validation target0:0:5: Ending Domain Validation Vendor: IBM Model: DDYS-T36950N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 sym0:8:0: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation sym0:8: wide asynchronous. sym0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31) target0:0:8: Ending Domain Validation SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sda: drive cache: write back SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 8925000 512-byte hdwr sectors (4570 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 8925000 512-byte hdwr sectors (4570 MB) SCSI device sdb: drive cache: write back sdb:<4>sym0:1:0: ABORT operation started. sym0:1:0: ABORT operation timed-out. sym0:1:0: DEVICE RESET operation started. sym0:1:0: DEVICE RESET operation timed-out. sym0:1:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sym0:1:0: BUS RESET operation complete. sym0:1:0: ABORT operation started. sym0:1:0: ABORT operation timed-out. sym0:1:0: DEVICE RESET operation started. sym0:1:0: DEVICE RESET operation timed-out. sym0:1:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sym0:1:0: BUS RESET operation complete. sym0:1:0: ABORT operation started. sym0:1:0: ABORT operation timed-out. sym0:1:0: DEVICE RESET operation started. sym0:1:0: DEVICE RESET operation timed-out. sym0:1:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sym0:1:0: BUS RESET operation complete. sym0:1:0: ABORT operation started. sym0:1:0: ABORT operation timed-out. sym0:1:0: DEVICE RESET operation started. sym0:1:0: DEVICE RESET operation timed-out. sym0:1:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sym0:1:0: BUS RESET operation complete. sym0:1:0: ABORT operation started. sym0:1:0: ABORT operation timed-out. sym0:1:0: DEVICE RESET operation started. sym0:1:0: DEVICE RESET operation timed-out. sym0:1:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sym0:1:0: BUS RESET operation complete. SCSI error : <0 0 1 0> return code = 0x6000000 end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 unable to read partition table Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 sym0:5:0:phase change 6-7 9@1fc5af90 resid=7. sym0:5:0:phase change 6-7 9@1fc5af84 resid=7. sym0:5:0:phase change 6-7 9@1fc5af90 resid=7. sym0:5:0:phase change 6-7 9@1fc5af84 resid=7. sym0:5:0:phase change 6-7 9@1fc5af90 resid=7. sym0:5:0:phase change 6-7 9@1fc5af84 resid=7. sym0:5:0:phase change 6-7 9@1fc5af90 resid=7. Attached scsi removable disk sdc at scsi0, channel 0, id 5, lun 0 SCSI device sdd: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sdd: drive cache: write back sdd: sdd1 < sdd5 > Attached scsi disk sdd at scsi0, channel 0, id 8, lun 0 sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 sr2: scsi-1 drive Attached scsi CD-ROM sr2 at scsi0, channel 0, id 4, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0 Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0, type 5 Attached scsi generic sg3 at scsi0, channel 0, id 3, lun 0, type 5 Attached scsi generic sg4 at scsi0, channel 0, id 4, lun 0, type 5 Attached scsi generic sg5 at scsi0, channel 0, id 5, lun 0, type 0 Attached scsi generic sg6 at scsi0, channel 0, id 8, lun 0, type 0 PCI: Enabling device 0000:02:0b.2 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:0b.2[C] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:02:0b.2: NEC Corporation USB 2.0 ehci_hcd 0000:02:0b.2: irq 11, pci mem 0xec000000 ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:0b.2: park 0 ehci_hcd 0000:02:0b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0000:02:0b.0 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:02:0b.0: NEC Corporation USB ohci_hcd 0000:02:0b.0: irq 9, pci mem 0xed000000 ohci_hcd 0000:02:0b.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: Enabling device 0000:02:0b.1 (0014 -> 0016) ACPI: PCI interrupt 0000:02:0b.1[B] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:02:0b.1: NEC Corporation USB (#2) ohci_hcd 0000:02:0b.1: irq 9, pci mem 0xec800000 ohci_hcd 0000:02:0b.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 2 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 9, io base 0xa400 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 9, io base 0xa000 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new full speed USB device using uhci_hcd and address 2 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb 5-2: new full speed USB device using uhci_hcd and address 2 hub 5-2:1.0: USB hub found hub 5-2:1.0: 4 ports detected usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver PCI: Enabling device 0000:02:0e.1 (0004 -> 0005) gameport: pci0000:02:0e.1 speed 1147 kHz Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). PCI: Enabling device 0000:02:0e.0 (0004 -> 0005) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 ALSA device list: #0: Sound Blaster Live! (rev.8, serial:0x80401102) at 0xd000, irq 11 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 PCI1 PCI2 UAR1 UAR2 USB0 USB1 AC97 ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: hda4: found reiserfs format "3.6" with standard journal ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 164k freed usb 1-4: new high speed USB device using ehci_hcd and address 3 scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Vendor: Model: USB DISK Pro Rev: PMAP Type: Direct-Access ANSI SCSI revision: 00 SCSI device sde: 1004544 512-byte hdwr sectors (514 MB) sde: assuming Write Enabled sde: assuming drive cache: write through SCSI device sde: 1004544 512-byte hdwr sectors (514 MB) sde: assuming Write Enabled sde: assuming drive cache: write through sde: sde1 Attached scsi removable disk sde at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg7 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete VFS: Can't find ext3 filesystem on dev sde. FAT: invalid media value (0x00) VFS: Can't find a valid FAT filesystem on dev sde. FAT: invalid media value (0x00) VFS: Can't find a valid FAT filesystem on dev sde.