Total memory = 768MB; using 2048kB for hash table (at c0600000) Linux version 2.6.12-rc1 (root@mludi) (gcc version 3.4.3-20050110 (Gentoo Linux 3.4.3.20050110-r1, ssp-3.4.3.20050110-0, pie-8.7.7)) #5 Tue Apr 5 16:35:55 MDT 2005 Found UniNorth memory controller & host bridge, revision: 36 Mapped at 0xfdf48000 Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdec8000 PowerMac motherboard: PowerMac G4 Windtunnel Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 Found NEC PD720100A USB2 chip with disabled EHCI, fixing up... via-pmu: Server Mode is disabled PMU driver 2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=928, gen1=929 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 On node 0 totalpages: 196608 DMA zone: 196608 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=/dev/hda4 ro PowerMac using OpenPIC irq controller at 0x80040000 OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc676000 OpenPIC timer frequency is 4.166666 MHz PID hash table entries: 4096 (order: 12, 65536 bytes) GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 33.305132 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 772480k available (2812k kernel code, 1264k data, 152k init, 0k highmem) AGP special page: 0xeffff000 Calibrating delay loop... 997.37 BogoMIPS (lpj=498688) Mount-cache hash table entries: 512 scheduling while atomic: swapper/0x00000002/0 Call trace: [c02b9cd0] schedule+0x6fc/0x780 [c0004b00] syscall_exit_work+0x108/0x10c [c00a9bcc] proc_device_tree_init+0x7c/0x98 [c03bdbc8] proc_root_init+0x14c/0x158 [c03a664c] start_kernel+0x184/0x1bc [00003a30] 0x3a30 NET: Registered protocol family 16 PCI: Probing PCI hardware Registering openpic with sysfs... usbcore: registered new driver usbfs usbcore: registered new driver hub Thermal assist unit not available Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API Using unsupported 640x480 NVDA,Display-B at 94004000, depth=8, pitch=1024 Console: switching to colour frame buffer device 80x30 fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-B@1 Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 IN from bad port 64 at c01c87c4 IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c IN from bad port 60 at c01c8814 IN from bad port 64 at c01c886c i8042.c: No controller found. io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 2060e1, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:78:08:88 eth0: Found BCM5421 PHY PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky orinoco 0.14alpha2 (David Gibson , Pavel Roskin , et al) airport 0.14alpha2 (Benjamin Herrenschmidt ) MacIO PCI driver attached to Keylargo chipset adb: starting probe task... adb: finished probe task... Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... hda: WDC WD600BB-00DKA0, ATA DISK drive hda: Enabling Ultra DMA 5 ide0 at 0xf1012000-0xf1012007,0xf1012160 on irq 39 eth0: Link is up at 100 Mbps, half-duplex. ide1: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19 Probing IDE interface ide1... ide1: Bus empty, interface released. ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R1312, ATAPI CD/DVD-ROM drive ide1 at 0xf100e000-0xf100e007,0xf100e160 on irq 20 hda: max request size: 1024KiB hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 usbmon: debugs is not available ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) ohci_hcd 0001:10:1b.0: NEC Corporation USB ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) ohci_hcd 0001:10:1b.1: NEC Corporation USB (#2) ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice i2c /dev entries driver ADM1030 fan controller [@2c] DS1775 digital thermometer [@49] Temp: 26.5 C Hyst: 75.0 C OS: 80.0 C Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits NET: Registered protocol family 2 Reducing overheating limit to 65.0 C (Hyst: 60.0 C) IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ReiserFS: hda4: found reiserfs format "3.6" with standard journal usb 2-1: new low speed USB device using ohci_hcd and address 2 input: USB HID v1.10 Keyboard [M02 1.6] on usb-0001:10:1b.1-1 input: USB HID v1.10 Mouse [M02 1.6] on usb-0001:10:1b.1-1 ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: replayed 1 transactions in 0 seconds ReiserFS: hda4: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 152k init 4k chrp 8k prep Adding 524280k swap on /dev/hda3. Priority:-1 extents:1 CPU-temp: 27.0 C, Case: 23.3 C, Fan: 0 (tuned -11) SCSI subsystem initialized usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver ieee1394: raw1394: /dev/raw1394 device initialized sbp2: $Rev: 1219 $ Ben Collins ohci1394: $Rev: 1250 $ Ben Collins PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffe780888] eth0: Link is up at 100 Mbps, half-duplex. eth0: Pause is disabled hda: Enabling Ultra DMA 5