[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27 [ 0.000000] Linux version 4.15.18-gentoo-GOS (root@dat) (gcc version 6.4.0 (Gentoo Hardened 6.4.0-r1 p1.3)) #1 SMP Wed May 23 15:52:30 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/KernelBild root=/dev/sda10 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a9749fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a974a000-0x00000000a9750fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a9751000-0x00000000aa02ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa030000-0x00000000aa2aafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aa2ab000-0x00000000ba557fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba558000-0x00000000ba76bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba76c000-0x00000000ba853fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ba854000-0x00000000baf8afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baf8b000-0x00000000baffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xba82c000 ACPI 2.0=0xba82c000 SMBIOS=0xf04c0 MPS=0xfd450 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FC0000000 write-back [ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 3 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 00BB800000 mask 7FFF800000 uncachable [ 0.000000] 5 base 023F000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 023E800000 mask 7FFF800000 uncachable [ 0.000000] 7 base 023E600000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8094M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1754a000, 0x1754afff] PGTABLE [ 0.000000] BRK [0x1754b000, 0x1754bfff] PGTABLE [ 0.000000] BRK [0x1754c000, 0x1754cfff] PGTABLE [ 0.000000] BRK [0x1754d000, 0x1754dfff] PGTABLE [ 0.000000] BRK [0x1754e000, 0x1754efff] PGTABLE [ 0.000000] BRK [0x1754f000, 0x1754ffff] PGTABLE [ 0.000000] BRK [0x17550000, 0x17550fff] PGTABLE [ 0.000000] BRK [0x17551000, 0x17551fff] PGTABLE [ 0.000000] BRK [0x17552000, 0x17552fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x370cd000-0x3785dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BA82C000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BA82C080 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BA837548 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BA82C1A0 00B3A4 (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000BA852080 000040 [ 0.000000] ACPI: APIC 0x00000000BA837658 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BA8376D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000BA837718 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000BA8377C0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BA837D00 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000BA8387D8 00003C (v01 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BA838818 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BA838850 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000BA838BC0 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x00000000BA83BE60 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000BA83BE98 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a9749fff] [ 0.000000] node 0: [mem 0x00000000a9751000-0x00000000aa02ffff] [ 0.000000] node 0: [mem 0x00000000aa2ab000-0x00000000ba557fff] [ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff] [ 0.000000] On node 0 totalpages: 2066548 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11852 pages used for memmap [ 0.000000] DMA32 zone: 758487 pages, LIFO batch:31 [ 0.000000] Normal zone: 20376 pages used for memmap [ 0.000000] Normal zone: 1304064 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132504 r8192 d31336 u524288 [ 0.000000] pcpu-alloc: s132504 r8192 d31336 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2034230 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/KernelBild root=/dev/sda10 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7815052K/8266192K available (10252K kernel code, 532K rwdata, 2540K rodata, 1204K init, 532K bss, 451140K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU debug extended QS entry/exit. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000ba6ea000 end: 0x000000ba6f6fff [ 0.000000] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 2294.747 MHz processor [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.49 BogoMIPS (lpj=2294747) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] Yama: becoming mindful. [ 0.006000] AppArmor: AppArmor initialized [ 0.006000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.007102] CPU: Physical Processor ID: 0 [ 0.007103] CPU: Processor Core ID: 0 [ 0.007109] mce: CPU supports 9 MCE banks [ 0.007116] CPU0: Thermal monitoring enabled (TM1) [ 0.007128] process: using mwait in idle threads [ 0.007131] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.007132] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.007134] Spectre V2 : Vulnerable: Minimal generic ASM retpoline [ 0.007218] Freeing SMP alternatives memory: 24K [ 0.012632] TSC deadline timer enabled [ 0.012633] smpboot: CPU0: Intel(R) Core(TM) i5-4670T CPU @ 2.30GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.012672] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.012705] ... version: 3 [ 0.012706] ... bit width: 48 [ 0.012707] ... generic registers: 8 [ 0.012708] ... value mask: 0000ffffffffffff [ 0.012709] ... max period: 00007fffffffffff [ 0.012710] ... fixed-purpose events: 3 [ 0.012710] ... event mask: 00000007000000ff [ 0.012736] Hierarchical SRCU implementation. [ 0.013000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.013000] smp: Bringing up secondary CPUs ... [ 0.013000] x86: Booting SMP configuration: [ 0.013000] .... node #0, CPUs: #1 #2 #3 [ 0.017613] smp: Brought up 1 node, 4 CPUs [ 0.017613] smpboot: Max logical packages: 1 [ 0.017613] smpboot: Total of 4 processors activated (18357.97 BogoMIPS) [ 0.018112] devtmpfs: initialized [ 0.018112] PM: Registering ACPI NVS region [mem 0xa974a000-0xa9750fff] (28672 bytes) [ 0.018112] PM: Registering ACPI NVS region [mem 0xba76c000-0xba853fff] (950272 bytes) [ 0.018112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.018112] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.018161] NET: Registered protocol family 16 [ 0.018215] audit: initializing netlink subsys (disabled) [ 0.018219] audit: type=2000 audit(1530183021.018:1): state=initialized audit_enabled=0 res=1 [ 0.018219] cpuidle: using governor ladder [ 0.018219] cpuidle: using governor menu [ 0.018219] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.018219] ACPI: bus type PCI registered [ 0.018219] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.018219] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.018219] PCI: Using configuration type 1 for base access [ 0.018219] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.019036] ACPI: Added _OSI(Module Device) [ 0.019038] ACPI: Added _OSI(Processor Device) [ 0.019039] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.019040] ACPI: Added _OSI(Processor Aggregator Device) [ 0.019047] ACPI: Executed 1 blocks of module-level executable AML code [ 0.022001] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.023087] ACPI: Dynamic OEM Table Load: [ 0.023092] ACPI: SSDT 0xFFFF915DB5013400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.023185] ACPI: Dynamic OEM Table Load: [ 0.023191] ACPI: SSDT 0xFFFF915DB4B0F000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.023379] ACPI: Dynamic OEM Table Load: [ 0.023379] ACPI: SSDT 0xFFFF915DB4A96A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.023703] ACPI: Interpreter enabled [ 0.023721] ACPI: (supports S0 S3 S5) [ 0.023723] ACPI: Using IOAPIC for interrupt routing [ 0.023743] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.024069] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.031956] ACPI: Power Resource [FN00] (off) [ 0.032006] ACPI: Power Resource [FN01] (off) [ 0.032055] ACPI: Power Resource [FN02] (off) [ 0.032103] ACPI: Power Resource [FN03] (off) [ 0.032149] ACPI: Power Resource [FN04] (off) [ 0.032657] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.032662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.032803] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.032889] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.032891] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.033045] PCI host bridge to bus 0000:00 [ 0.033048] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.033049] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.033051] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.033052] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.033054] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.033055] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.033057] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.033058] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window] [ 0.033060] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.033066] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.033129] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.033138] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.033143] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.033146] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.033204] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.033210] pci 0000:00:03.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit] [ 0.033286] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.033303] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit] [ 0.033354] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.033402] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.033420] pci 0000:00:16.0: reg 0x10: [mem 0xf0540000-0xf054000f 64bit] [ 0.033474] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.033519] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.033532] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.033537] pci 0000:00:16.3: reg 0x14: [mem 0xf053e000-0xf053efff] [ 0.033628] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.033643] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff] [ 0.033649] pci 0000:00:19.0: reg 0x14: [mem 0xf053d000-0xf053dfff] [ 0.033655] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.033704] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.033755] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.033773] pci 0000:00:1a.0: reg 0x10: [mem 0xf053c000-0xf053c3ff] [ 0.033845] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.033894] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.033909] pci 0000:00:1b.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit] [ 0.033960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.034009] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.034068] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.034081] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.034083] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.034155] pci 0000:00:1c.1: [8086:244e] type 01 class 0x060401 [ 0.034214] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.034286] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.034344] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.034355] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.034357] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.034426] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.034444] pci 0000:00:1d.0: reg 0x10: [mem 0xf053b000-0xf053b3ff] [ 0.034517] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.034568] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.034706] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.034719] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.034725] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.034730] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.034736] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.034741] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.034747] pci 0000:00:1f.2: reg 0x24: [mem 0xf053a000-0xf053a7ff] [ 0.034776] pci 0000:00:1f.2: PME# supported from D3hot [ 0.034819] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.034833] pci 0000:00:1f.3: reg 0x10: [mem 0xf0539000-0xf05390ff 64bit] [ 0.034850] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.034931] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.034977] pci 0000:02:00.0: [8086:244e] type 01 class 0x060401 [ 0.035100] pci 0000:02:00.0: supports D1 D2 [ 0.035101] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.035131] pci 0000:00:1c.1: PCI bridge to [bus 02-03] (subtractive decode) [ 0.035139] pci 0000:00:1c.1: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.035140] pci 0000:00:1c.1: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.035141] pci 0000:00:1c.1: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.035142] pci 0000:00:1c.1: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.035142] pci 0000:00:1c.1: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.035143] pci 0000:00:1c.1: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.035144] pci 0000:00:1c.1: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.035145] pci 0000:00:1c.1: bridge window [mem 0xbfa00000-0xfeafffff window] (subtractive decode) [ 0.035251] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode) [ 0.035272] pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.035272] pci 0000:02:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.035273] pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.035274] pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.035274] pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.035275] pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.035276] pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.035277] pci 0000:02:00.0: bridge window [mem 0xbfa00000-0xfeafffff window] (subtractive decode) [ 0.035328] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.035356] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.035378] pci 0000:04:00.0: reg 0x18: [mem 0xf0400000-0xf0400fff 64bit] [ 0.035402] pci 0000:04:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.035411] pci 0000:04:00.0: enabling Extended Tags [ 0.035497] pci 0000:04:00.0: supports D1 D2 [ 0.035498] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.038016] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.038019] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.038021] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff] [ 0.038038] pci_bus 0000:00: on NUMA node 0 [ 0.038651] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.038685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.038717] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.038750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.038783] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.038813] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.038845] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.038876] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.039191] SCSI subsystem initialized [ 0.039201] libata version 3.00 loaded. [ 0.039201] ACPI: bus type USB registered [ 0.039201] usbcore: registered new interface driver usbfs [ 0.039201] usbcore: registered new interface driver hub [ 0.039201] usbcore: registered new device driver usb [ 0.039201] Registered efivars operations [ 0.042768] PCI: Using ACPI for IRQ routing [ 0.044015] PCI: pci_cache_line_size set to 64 bytes [ 0.044051] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.044052] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.044053] e820: reserve RAM buffer [mem 0xa974a000-0xabffffff] [ 0.044053] e820: reserve RAM buffer [mem 0xaa030000-0xabffffff] [ 0.044054] e820: reserve RAM buffer [mem 0xba558000-0xbbffffff] [ 0.044055] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff] [ 0.044056] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff] [ 0.044106] Bluetooth: Core ver 2.22 [ 0.044111] NET: Registered protocol family 31 [ 0.044112] Bluetooth: HCI device and connection manager initialized [ 0.044113] Bluetooth: HCI socket layer initialized [ 0.044115] Bluetooth: L2CAP socket layer initialized [ 0.044119] Bluetooth: SCO socket layer initialized [ 0.044270] clocksource: Switched to clocksource hpet [ 0.044341] AppArmor: AppArmor Filesystem Enabled [ 0.044950] pnp: PnP ACPI init [ 0.044998] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.045008] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.045110] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.045112] system 00:01: [io 0xffff] has been reserved [ 0.045114] system 00:01: [io 0xffff] has been reserved [ 0.045115] system 00:01: [io 0xffff] has been reserved [ 0.045116] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.045118] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.045119] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.045120] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.045122] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.045123] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.045126] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.045138] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.045168] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.045171] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.045254] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.045256] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.045258] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.045260] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.045427] pnp 00:05: [dma 0 disabled] [ 0.045454] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.045710] pnp 00:06: [dma 0 disabled] [ 0.045779] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.045809] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.045812] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.046085] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.046087] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.046088] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.046090] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.046091] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.046093] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.046094] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.046096] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.046098] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.046099] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.046101] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.046102] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.046105] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.046279] pnp: PnP ACPI: found 9 devices [ 0.050801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.050805] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.050835] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.050844] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.050863] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.050873] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0420000-0xf043ffff pref] [ 0.050875] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.050877] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.050880] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff] [ 0.050887] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.050888] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.050889] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.050889] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.050890] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.050891] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.050892] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.050892] pci_bus 0000:00: resource 11 [mem 0xbfa00000-0xfeafffff window] [ 0.050893] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.050894] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.050895] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.050896] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.050896] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.050897] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.050898] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.050898] pci_bus 0000:02: resource 11 [mem 0xbfa00000-0xfeafffff window] [ 0.050899] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.050900] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.050901] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.050901] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.050902] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.050903] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.050903] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.050904] pci_bus 0000:03: resource 11 [mem 0xbfa00000-0xfeafffff window] [ 0.050905] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.050906] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.050980] NET: Registered protocol family 2 [ 0.051070] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.051143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.051265] TCP: Hash tables configured (established 65536 bind 65536) [ 0.051283] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.051302] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.051341] NET: Registered protocol family 1 [ 0.051416] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.085082] PCI: CLS 64 bytes, default 64 [ 0.085111] Unpacking initramfs... [ 0.163676] Freeing initrd memory: 7748K [ 0.163707] DMAR: No ATSR found [ 0.163733] DMAR: dmar0: Using Queued invalidation [ 0.163739] DMAR: dmar1: Using Queued invalidation [ 0.163748] DMAR: Setting RMRR: [ 0.163782] DMAR: Setting identity map for device 0000:00:02.0 [0xbb800000 - 0xbf9fffff] [ 0.164166] DMAR: Setting identity map for device 0000:00:14.0 [0xba6ea000 - 0xba6f6fff] [ 0.164217] DMAR: Setting identity map for device 0000:00:1a.0 [0xba6ea000 - 0xba6f6fff] [ 0.164252] DMAR: Setting identity map for device 0000:00:1d.0 [0xba6ea000 - 0xba6f6fff] [ 0.164267] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.164291] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.164383] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.164420] iommu: Adding device 0000:00:00.0 to group 0 [ 0.164426] iommu: Adding device 0000:00:02.0 to group 1 [ 0.164432] iommu: Adding device 0000:00:03.0 to group 2 [ 0.164438] iommu: Adding device 0000:00:14.0 to group 3 [ 0.164448] iommu: Adding device 0000:00:16.0 to group 4 [ 0.164453] iommu: Adding device 0000:00:16.3 to group 4 [ 0.164459] iommu: Adding device 0000:00:19.0 to group 5 [ 0.164466] iommu: Adding device 0000:00:1a.0 to group 6 [ 0.164472] iommu: Adding device 0000:00:1b.0 to group 7 [ 0.164478] iommu: Adding device 0000:00:1c.0 to group 8 [ 0.164487] iommu: Adding device 0000:00:1c.1 to group 9 [ 0.164493] iommu: Adding device 0000:00:1c.4 to group 10 [ 0.164500] iommu: Adding device 0000:00:1d.0 to group 11 [ 0.164511] iommu: Adding device 0000:00:1f.0 to group 12 [ 0.164517] iommu: Adding device 0000:00:1f.2 to group 12 [ 0.164523] iommu: Adding device 0000:00:1f.3 to group 12 [ 0.164527] iommu: Adding device 0000:02:00.0 to group 9 [ 0.164533] iommu: Adding device 0000:04:00.0 to group 13 [ 0.165771] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.165773] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.165774] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.165775] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.165776] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.166117] Scanning for low memory corruption every 60 seconds [ 0.166148] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x1d5000 bytes, mapped to 0x000000000e15cfc4 [ 0.166150] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200 [ 0.166930] Console: switching to colour frame buffer device 100x37 [ 0.167629] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.168115] Initialise system trusted keyrings [ 0.168145] workingset: timestamp_bits=62 max_order=21 bucket_order=0 [ 0.169348] Key type cifs.idmap registered [ 0.169359] fuse init (API version 7.26) [ 0.169430] SGI XFS with ACLs, security attributes, no debug enabled [ 0.170379] NET: Registered protocol family 38 [ 0.170642] Key type asymmetric registered [ 0.170891] Asymmetric key parser 'x509' registered [ 0.171166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.171439] io scheduler noop registered [ 0.171713] io scheduler deadline registered [ 0.172017] io scheduler cfq registered (default) [ 0.172298] io scheduler mq-deadline registered [ 0.172580] io scheduler kyber registered [ 0.172886] io scheduler bfq registered [ 0.173482] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.194311] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.194712] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.215394] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.215998] lp: driver loaded but no devices found [ 0.216367] Linux agpgart interface v0.103 [ 0.216696] intel_idle: MWAIT substates: 0x42120 [ 0.216697] intel_idle: v0.4.1 model 0x3C [ 0.216791] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.216866] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.217224] ACPI: Power Button [PWRB] [ 0.217590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.217956] ACPI: Power Button [PWRF] [ 0.218728] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.219662] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.220112] ACPI: Thermal Zone [TZ00] (28 C) [ 0.220614] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.221021] ACPI: Thermal Zone [TZ01] (30 C) [ 0.221720] [drm] Memory usable by graphics device = 2048M [ 0.222056] [drm] VT-d active for gfx access [ 0.222373] checking generic (e0000000 1d5000) vs hw (e0000000 10000000) [ 0.222374] fb: switching to inteldrmfb from simple [ 0.222681] Console: switching to colour dummy device 80x25 [ 0.222748] [drm] Replacing VGA console driver [ 0.222757] [drm] DMAR active, disabling use of stolen memory [ 0.228847] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.228848] [drm] Driver supports precise vblank timestamp query. [ 0.234184] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 0.235223] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.235378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.235832] parport_pc 00:06: reported by Plug and Play ACPI [ 0.235882] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 0.326173] lp0: using parport0 (interrupt-driven). [ 0.329216] ahci 0000:00:1f.2: version 3.0 [ 0.329338] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode [ 0.329341] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.338628] scsi host0: ahci [ 0.339010] scsi host1: ahci [ 0.339387] scsi host2: ahci [ 0.339556] scsi host3: ahci [ 0.339816] scsi host4: ahci [ 0.339925] scsi host5: ahci [ 0.339955] ata1: SATA max UDMA/133 abar m2048@0xf053a000 port 0xf053a100 irq 27 [ 0.339957] ata2: SATA max UDMA/133 abar m2048@0xf053a000 port 0xf053a180 irq 27 [ 0.339958] ata3: DUMMY [ 0.339959] ata4: DUMMY [ 0.339960] ata5: SATA max UDMA/133 abar m2048@0xf053a000 port 0xf053a300 irq 27 [ 0.339962] ata6: SATA max UDMA/133 abar m2048@0xf053a000 port 0xf053a380 irq 27 [ 0.339991] tun: Universal TUN/TAP device driver, 1.6 [ 0.340140] usbcore: registered new interface driver usb-storage [ 0.340157] i8042: PNP: No PS/2 controller found. [ 0.340267] rtc_cmos 00:02: RTC can wake from S4 [ 0.340367] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.340391] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.340397] i2c /dev entries driver [ 0.340586] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.340591] intel_pstate: Intel P-state driver initializing [ 0.340657] EFI Variables Facility v0.08 2004-May-17 [ 0.344026] usbcore: registered new interface driver usbhid [ 0.344028] usbhid: USB HID core driver [ 0.344061] Netfilter messages via NETLINK v0.30. [ 0.344180] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.344233] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.344447] Initializing XFRM netlink socket [ 0.344450] NET: Registered protocol family 17 [ 0.344453] NET: Registered protocol family 15 [ 0.344596] microcode: sig=0x306c3, pf=0x2, revision=0x22 [ 0.344627] microcode: Microcode Update Driver: v2.2. [ 0.344633] AVX2 version of gcm_enc/dec engaged. [ 0.344635] AES CTR mode by8 optimization enabled [ 0.344956] sched_clock: Marking stable (344953913, 0)->(341618179, 3335734) [ 0.345067] Loading compiled-in X.509 certificates [ 0.346127] Loaded X.509 cert 'Build time autogenerated kernel key: 3bfc4f9f683c0c7de01c9b38977b13beac31765b' [ 0.346137] AppArmor: AppArmor sha1 policy hashing enabled [ 0.346402] rtc_cmos 00:02: setting system clock to 2018-06-28 10:50:21 UTC (1530183021) [ 0.346407] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.346973] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.346987] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 0.346988] cfg80211: failed to load regulatory.db [ 0.644769] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.644838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.644885] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.646027] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.646028] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.646030] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.646427] ata1.00: supports DRM functions and may not be fully accessible [ 0.646491] ata5.00: ATAPI: OPTIARC DVD-ROM DDU1681S, 1.06, max UDMA/100 [ 0.647009] ata1.00: NCQ Send/Recv Log not supported [ 0.647011] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133 [ 0.647013] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.647044] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.647046] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.647048] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.648357] ata1.00: supports DRM functions and may not be fully accessible [ 0.648451] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.648452] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.648453] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.648533] ata6.00: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100 [ 0.648687] ata1.00: NCQ Send/Recv Log not supported [ 0.648812] ata5.00: configured for UDMA/100 [ 0.649551] ata1.00: configured for UDMA/133 [ 0.650790] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.650791] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.650793] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.652295] ata6.00: configured for UDMA/100 [ 0.670015] fbcon: inteldrmfb (fb0) is primary device [ 0.717641] Console: switching to colour frame buffer device 240x75 [ 0.734361] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.164026] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.182728] ata2.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133 [ 1.182746] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.183018] tsc: Refined TSC clocksource calibration: 2294.686 MHz [ 1.183038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x211399552f8, max_idle_ns: 440795292447 ns [ 1.183473] ata2.00: configured for UDMA/133 [ 2.191232] clocksource: Switched to clocksource tsc [ 3.359052] floppy0: no floppy controllers found [ 3.359323] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 3.359698] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.359883] scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5 [ 3.359917] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.359930] sd 0:0:0:0: [sda] Write Protect is off [ 3.359931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.359996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.360135] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.360142] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.360143] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.360147] sd 1:0:0:0: [sdb] Write Protect is off [ 3.360148] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.360153] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.361627] scsi 4:0:0:0: CD-ROM OPTIARC DVD-ROM DDU1681S 1.06 PQ: 0 ANSI: 5 [ 3.362928] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 [ 3.363498] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.381715] scsi 4:0:0:0: Attached scsi generic sg2 type 5 [ 3.382428] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-5280S 1.01 PQ: 0 ANSI: 5 [ 3.400936] scsi 5:0:0:0: Attached scsi generic sg3 type 5 [ 3.431086] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.431769] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.432501] Freeing unused kernel memory: 1204K [ 3.432515] Write protecting the kernel read-only data: 16384k [ 3.432852] Freeing unused kernel memory: 2020K [ 3.435130] Freeing unused kernel memory: 1556K [ 3.435201] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.435216] x86/mm: Checking user space page tables [ 3.435238] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.547881] XFS (sda10): Mounting V5 Filesystem [ 3.560382] XFS (sda10): Ending clean mount [ 4.222640] udevd[1258]: starting version 3.2.5 [ 4.248894] udevd[1259]: starting eudev-3.2.5 [ 4.312447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.313620] ehci-pci: EHCI PCI platform driver [ 4.313733] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.314236] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.314247] ehci-pci 0000:00:1a.0: debug port 2 [ 4.318154] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.318236] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf053c000 [ 4.318763] pps_core: LinuxPPS API ver. 1 registered [ 4.318764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.322988] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.322993] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.323000] r8169 0000:04:00.0: enabling device (0000 -> 0003) [ 4.323392] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000015506a2e, d8:5d:4c:81:0f:01, XID 18000000 IRQ 28 [ 4.323393] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 4.323899] PTP clock support registered [ 4.325817] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.325841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.325842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.325843] usb usb1: Product: EHCI Host Controller [ 4.325844] usb usb1: Manufacturer: Linux 4.15.18-gentoo-GOS ehci_hcd [ 4.325844] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.325946] hub 1-0:1.0: USB hub found [ 4.325949] hub 1-0:1.0: 3 ports detected [ 4.326921] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 4.327049] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.328591] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 4.328595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.328597] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 4.328599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.328599] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 4.328601] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 4.328603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.328603] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 4.328605] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 4.328607] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.328607] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.328728] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.328778] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.329544] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.329544] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.329882] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 4.329885] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.330000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.330000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.330002] usb usb2: Product: xHCI Host Controller [ 4.330003] usb usb2: Manufacturer: Linux 4.15.18-gentoo-GOS xhci-hcd [ 4.330003] usb usb2: SerialNumber: 0000:00:14.0 [ 4.330235] hub 2-0:1.0: USB hub found [ 4.330252] hub 2-0:1.0: 15 ports detected [ 4.331246] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.331371] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.331451] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.331452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.331453] usb usb3: Product: xHCI Host Controller [ 4.331454] usb usb3: Manufacturer: Linux 4.15.18-gentoo-GOS xhci-hcd [ 4.331454] usb usb3: SerialNumber: 0000:00:14.0 [ 4.331621] hub 3-0:1.0: USB hub found [ 4.331631] hub 3-0:1.0: 6 ports detected [ 4.333112] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.333158] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.333167] ehci-pci 0000:00:1d.0: debug port 2 [ 4.337073] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.337131] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053b000 [ 4.342250] vboxdrv: loading out-of-tree module taints kernel. [ 4.342567] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 4.342569] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.342748] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 4.342869] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 4.343627] vboxdrv: Found 4 processor cores [ 4.343993] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.344019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.344020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.344021] usb usb4: Product: EHCI Host Controller [ 4.344022] usb usb4: Manufacturer: Linux 4.15.18-gentoo-GOS ehci_hcd [ 4.344022] usb usb4: SerialNumber: 0000:00:1d.0 [ 4.344097] hub 4-0:1.0: USB hub found [ 4.344100] hub 4-0:1.0: 3 ports detected [ 4.344432] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.361999] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 4.362092] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 4.362401] vboxdrv: TSC mode is Invariant, tentative frequency 2294685803 Hz [ 4.362401] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001) [ 4.371699] VBoxNetFlt: Successfully started. [ 4.376580] VBoxNetAdp: Successfully started. [ 4.384648] VBoxPciLinuxInit [ 4.384651] vboxpci: pci-stub module not available, cannot detach PCI devices [ 4.384652] vboxpci: IOMMU found [ 4.434529] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.527295] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:a1:c8:7f [ 4.527296] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.527320] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 4.527370] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 4.527478] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 4.527961] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff8fc93860) [ 4.528290] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 4.541976] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.541977] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.541988] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.541989] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 4.541989] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e [ 4.541990] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 4.541991] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 4.541992] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 4.541993] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 4.541993] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 4.543994] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input3 [ 4.544026] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input4 [ 4.544064] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input5 [ 4.544100] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input6 [ 4.544132] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input7 [ 4.556501] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.556545] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.556572] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.556598] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.556623] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.556649] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 4.556674] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 4.629077] random: crng init done [ 4.649012] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.656997] usb 2-7: new high-speed USB device number 2 using xhci_hcd [ 4.665020] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 4.777461] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 4.777462] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.777828] hub 1-1:1.0: USB hub found [ 4.777897] hub 1-1:1.0: 6 ports detected [ 4.783200] usb 2-7: New USB device found, idVendor=0409, idProduct=005a [ 4.783202] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.783511] hub 2-7:1.0: USB hub found [ 4.783544] hub 2-7:1.0: 4 ports detected [ 4.793428] usb 4-1: New USB device found, idVendor=8087, idProduct=8000 [ 4.793430] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.793694] hub 4-1:1.0: USB hub found [ 4.793772] hub 4-1:1.0: 8 ports detected [ 4.985401] Adding 26214396k swap on /dev/sda9. Priority:-2 extents:1 across:26214396k SSFS [ 5.011151] XFS (sda8): Mounting V5 Filesystem [ 5.034369] XFS (sda8): Ending clean mount [ 5.042731] XFS (sda11): Mounting V5 Filesystem [ 5.067984] usb 2-7.4: new full-speed USB device number 3 using xhci_hcd [ 5.090107] XFS (sda11): Ending clean mount [ 5.093035] XFS (sda3): Mounting V5 Filesystem [ 5.109746] XFS (sda3): Ending clean mount [ 5.156589] usb 2-7.4: New USB device found, idVendor=0557, idProduct=8021 [ 5.156590] usb 2-7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.157161] hub 2-7.4:1.0: USB hub found [ 5.157330] hub 2-7.4:1.0: 4 ports detected [ 5.431010] usb 2-7.4.1: new full-speed USB device number 4 using xhci_hcd [ 5.529694] usb 2-7.4.1: New USB device found, idVendor=0557, idProduct=2213 [ 5.529706] usb 2-7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.529706] usb 2-7.4.1: Product: DVI DL KVMP [ 5.529707] usb 2-7.4.1: Manufacturer: ATEN [ 5.542959] input: ATEN DVI DL KVMP as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.4/2-7.4.1/2-7.4.1:1.0/0003:0557:2213.0001/input/input15 [ 5.594135] hid-generic 0003:0557:2213.0001: input: USB HID v1.00 Keyboard [ATEN DVI DL KVMP] on usb-0000:00:14.0-7.4.1/input0 [ 5.602712] input: ATEN DVI DL KVMP as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.4/2-7.4.1/2-7.4.1:1.1/0003:0557:2213.0002/input/input16 [ 5.602759] hid-generic 0003:0557:2213.0002: input: USB HID v1.00 Mouse [ATEN DVI DL KVMP] on usb-0000:00:14.0-7.4.1/input1 [ 5.691570] XFS (sdb3): Mounting V5 Filesystem [ 5.831206] XFS (sdb3): Ending clean mount [ 5.870506] XFS (sdb4): Mounting V5 Filesystem [ 5.995054] XFS (sdb4): Ending clean mount [ 6.243267] audit: type=1400 audit(1530175827.395:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=2156 comm="apparmor_parser" [ 7.554328] r8169 0000:04:00.0 enp4s0: link down [ 7.554342] r8169 0000:04:00.0 enp4s0: link down [ 9.228750] r8169 0000:04:00.0 enp4s0: link up [ 11.023032] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 38.613020] SUPR0GipMap: fGetGipCpu=0xb [ 39.143564] vboxdrv: 0000000000000000 VMMR0.r0 [ 39.267031] vboxdrv: 0000000000000000 VBoxDDR0.r0 [ 39.312959] vboxpci: created IOMMU domain 00000000e28bef0c [ 43.309762] HPET: Using timer above configured range: 3 [ 43.309765] HPET: Using timer above configured range: 3 [ 43.562809] HPET: Using timer above configured range: 3