node.conf freenx configuration file

node.conf (text/plain), 8.60 KB, created by STefan on 2005-02-25 12:23:05 UTC

# node.conf
#
# This file is provided by FreeNX. It should be placed either into
# /etc/nxserver/node.conf (FreeNX style) or /usr/NX/etc/node.conf
# (NoMachine NX style).
#
# It is mostly compatible with NoMachine node.conf. The most important 
# difference is that no spaces are allowed when assigning values (eg 
# "A=value" is allowed, "A = value" is NOT).
#
# This file is sourced by bash, so you can do some fancy stuff here if you
# want to, but be aware that it is sourced 3 times per connection. If you 
# want autostart stuff, set NODE_AUTOSTART instead!
# 
#
# You surely are aware that FreeNX is based on the fantastic results that
# the hard work by NoMachine.com has achieved. NoMachine.com released the
# core NX libraries under the GPL. The installation of these libs are the
# precondition for all FreeNX scripts to work. If you are installing this
# software with the help of one of the package management tools of your
# Linux distribution, you can assume that this dependency is taken care of
# by the tool.
#
# You have questions about the inner workings of the NX technology?
#
# Then you are recommended to first check out the rich and very detailed
# NoMachine documentation and their online Knowledge Base at 
#
#           http://www.nomachine.com/kb/
#
# Other sources of information are the NoMachine mailing lists 
# ([e-mail] and [e-mail]):
#
#           http://www.nomachine.com/mailinglists.php
#
# The FreeNX ([e-mail]) list is here:
#
#           https://mail.kde.org/mailman/listinfo/freenx-knx
#
# CVS: $Id: node.conf.sample,v 1.3 2005/02/14 10:07:43 pipitas Exp $

#########################################################################
# FreeNX specific node.conf directives
#########################################################################

# Logfile directives
# Before turning logging on, please make sure that NX_LOGFILE is 
# writeable for the "nx" user
#NX_LOGGING=0
#NX_LOGFILE=/var/log/nxserver.log

# Amount of seconds nxserver is to keep session data. The default of 2592000
# is equivalent to 30 days. If this is 0 no session history will be kept,
# and a negative value denotes infinity.
#SESSION_HISTORY=2592000

# Authentication directives
# This adds the passdb to the possible authentication methods
#ENABLE_PASSDB_AUTHENTICATION="1"

# This adds SSH to the possible authentication methods. For it to work sshd
# must be set up at localhost accepting password authentication.
#ENABLE_SSH_AUTHENTICATION="1"

# This adds SU to the possible authentication methods. For it to work the 
# "nx" user must be in the wheel (RedHat, Fedora) or the users group (SUSE) 
# and the user logging in must have a valid shell that accepts the -c 
# parameter.
#ENABLE_SU_AUTHENTICATION="0"

# Require all users to be in the passdb, regardless of authentication 
# method
#ENABLE_USER_DB="0"

# When set to 1 this will automatically resume started sessions
#ENABLE_AUTORECONNECT="0"

# When set to 1 this will automatically resume started sessions
# but only if an older client version is used
#ENABLE_AUTORECONNECT_BEFORE_140="1"

# When set to 1 exports NXUSERIP / NXSESSIONID in nxnode
#EXPORT_USERIP="0"
#EXPORT_SESSIONID="0"

# This can be set to any executable, which is started after session startup
# like: $NODE_AUTOSTART {start|restore}
#NODE_AUTOSTART=""


# FreeNX with ENABLE_NOMACHINE_FORWARD="1" will automatically forward all
# connections to the commercial NoMachine nxserver installed on the same
# machine. This feature is introduced to enable the usage of FreeNX adn
# NoMachine NX side by side on the same machine without conflicts.
#
# To make a connection to the FreeNX server, just use 'freenx.<user>' as 
# username (where <username> is the existing Unix username. (You do not 
# need to create a user named 'freenx.<user>'!)
#
# To make a connection to the NoMachine nxserver, use the unmodified
# '<user>' username.

#ENABLE_NOMACHINE_FORWARD="0"
#NOMACHINE_SERVER="/usr/NX/bin/nxserver"
#NOMACHINE_NX_HOME_DIR="/usr/NX/home/nx"

# When set to 1 will start nxagent in rootless mode.
#ENABLE_ROOTLESS_MODE="0"

#########################################################################
# NoMachine node.conf compatible (almost) directives
# All might not be implemented as of now, but will be in the near future.
#########################################################################

# The host name which is used by NX server. It's should be used if it's 
# different than the default hostname (as returned by `hostname`)
#SERVER_NAME="$(hostname)"

# Refuse the NX client connection if SSHD does not export the
# SSH_CONNECTION and SSH_CLIENT variables in the environment
# passed to the NX server.
#
# 1: Will check the remote IP and will not accept the
# connection if it can't be determined.
#
# 0: Will accept the connection even if the remote IP
# is not provided.
#SSHD_CHECK_IP="0"

# The port number where local 'sshd' is listening. 
#SSHD_PORT=22


# The base display number from which sessions are started. 
#DISPLAY_BASE=1000

# The maximum number of contemporary sessions that can be run on FreeNX
#SESSION_LIMIT=20

# The maximum number of contemporary sessions that a single user can run
# on FreeNX. Defaults to the value of SESSION_LIMIT.
#SESSION_USER_LIMIT=20

# The number of displays reserved for sessions, it has to be greater or equal
# to the maximum number of contemporary sessions that a server can run. 
#DISPLAY_LIMIT=200


# The command binary for the default window manager. It is run when a 
# unix 'custom' session is requested by the NX Client and an application 
# to run is specified. By default it is set to "twm". If you don't have 
# twm in the default path or if you want to use another window manager,
# you have to set it to the absolute file name of the command binary you 
# want to use.
#DEFAULT_X_WM=twm

# The key that contains the name of the script that starts a KDE session. 
# It's run when a unix 'kde' session is requested by the client.
#COMMAND_START_KDE=startkde

# The key that contains the name of the script that starts a gnome session. 
# It's run when a unix 'gnome' session is requested by the client.
#COMMAND_START_GNOME=gnome-session

# The key that contains the name of the script that starts a CDE session. 
# It's run when a unix 'cde' session is requested by the client.
#COMMAND_START_CDE=cdwm

# The key that contains the name of the complete path of command name 
# 'xterm'. It is run when a unix "xterm" session is requested by the 
# client.
#COMMAND_XTERM=xterm

# The key that contains the name of the complete path of command name 
# 'xauth'.
#COMMAND_XAUTH=/usr/X11R6/bin/xauth

# The key that contains the name of the complete path of command name 
# 'xset'. 
#COMMAND_XSET=/usr/X11R6/bin/xset

# The key that contains the name of the complete path of command name 
# 'xmodmap'. 
#COMMAND_XMODMAP=/usr/X11R6/bin/xmodmap

# The key that contains the name of the complete path of command name 
# 'xkbcomp'. 
#COMMAND_XKBCOMP=/usr/X11R6/bin/xkbcomp

# The keymap file for xkbcomp
#XKBCOMP_KEYMAP_FILE=/etc/X11/xkb/keymap/xfree86

# The key that contains the name of the complete path of command name 
# 'smbmount'.
#COMMAND_SMBMOUNT=smbmount

# The key that contains the name of the complete path of command name
# 'smbumount'.
#COMMAND_SMBUMOUNT=smbumount


# User for which sessions should be persistent. Either a comma-separated
# list of usernames or the word "all".
#ENABLE_PERSISTENT_SESSION="all"

# Users in the ENABLE_PERSISTENT_SESSION for which persistent should be
# disabled. Especially usefull if ENABLE_PERSISTENT_SESSION="all"
#DISABLE_PERSISTENT_SESSION=""

# Extra options sent to the different nx agents. See !M documentation
# for examples of usefull parameters.
#AGENT_EXTRA_OPTIONS_RFB=""
#AGENT_EXTRA_OPTIONS_RDP=""
#AGENT_EXTRA_OPTIONS_X=""

# The font server the agent will use. If set to "" no font server is used.
# For this to do any good, the client has to have the same font server set
# in /etc/X11/XF86Config
#AGENT_FONT_SERVER=""

# disable or enable use of 'tcp nodelay' on proxy. Old versions of Linux 
# kernels have problems using this option on sockets that will cause a loss 
# of TCP connections. This option is not set by default to allow clients to 
# specify whether to enable or disable TCP nodelay. Setting this option to 
# the value of "0" NX proxy avoids using 'tcp nodelay' but it will cause a 
# loss of interaction in sessions.
#PROXY_TCP_NODELAY="0"

# Extra options to nxproxy. See !M documentation for usefull parameters.
#PROXY_EXTRA_OPTIONS=""
NX_DIR=/usr/NX
PATH_BIN=$NX_DIR/bin # if you change that, be sure to also change the public keys
PATH_LIB=$NX_DIR/lib
NX_ETC_DIR=$NX_DIR/etc
NX_SESS_DIR=$NX_DIR/var/db
NX_HOME_DIR=$NX_DIR/home/nx
NX_NOMACHINE_WAY=1