[ 0.000000] Linux version 4.15.2-gentoo (root@i7) (gcc version 6.4.0 (Gentoo 6.4.0 p1.1)) #1 SMP Thu Feb 8 16:56:47 CET 2018 [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.15.2-gentoo root=UUID=953f200f-a3e3-4153-bf86-e1b2c2f95374 ro quiet splash [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfedc000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/P7P55D, BIOS 2101 10/20/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)] [ 0.000000] Base memory trampoline at [ (ptrval)] 95000 size 24576 [ 0.000000] BRK [0x86955000, 0x86955fff] PGTABLE [ 0.000000] BRK [0x86956000, 0x86956fff] PGTABLE [ 0.000000] BRK [0x86957000, 0x86957fff] PGTABLE [ 0.000000] BRK [0x86958000, 0x86958fff] PGTABLE [ 0.000000] BRK [0x86959000, 0x86959fff] PGTABLE [ 0.000000] BRK [0x8695a000, 0x8695afff] PGTABLE [ 0.000000] BRK [0x8695b000, 0x8695bfff] PGTABLE [ 0.000000] BRK [0x8695c000, 0x8695cfff] PGTABLE [ 0.000000] BRK [0x8695d000, 0x8695dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37267000-0x3792afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB970 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000DFE70100 00006C (v01 102011 XSDT1457 20111020 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000DFE70290 0000F4 (v03 102011 FACP1457 20111020 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000DFE704A0 00EF4D (v01 A1326 A1326001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000DFE88000 000040 [ 0.000000] ACPI: FACS 0x00000000DFE88000 000040 [ 0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 102011 APIC1457 20111020 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 102011 OEMMCFG 20111020 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 102011 OEMB1457 20111020 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DFE7F3F0 000038 (v01 102011 OEMHPET 20111020 MSFT 00000097) [ 0.000000] ACPI: DMAR 0x00000000DFE880C0 000090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 0x00000000DFE7F690 000034 (v06 102011 PerfTune 20111020 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x00000000DFE7F6D0 0000B0 (v01 102011 OEMOSFR 20111020 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DFE8AC00 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfe6ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.000000] On node 0 totalpages: 2096650 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14266 pages used for memmap [ 0.000000] DMA32 zone: 913008 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 102 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 43 pages/cpu @ (ptrval) s139096 r8192 d28840 u262144 [ 0.000000] pcpu-alloc: s139096 r8192 d28840 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063867 [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.15.2-gentoo root=UUID=953f200f-a3e3-4153-bf86-e1b2c2f95374 ro quiet splash [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8143504K/8386600K available (10252K kernel code, 1862K rwdata, 3020K rodata, 1216K init, 1556K bss, 243096K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] Switched APIC routing to physical flat. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 2808.791 MHz processor [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.58 BogoMIPS (lpj=2808791) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] SELinux: Initializing. [ 0.006000] SELinux: Starting in permissive mode [ 0.006000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006000] CPU: Physical Processor ID: 0 [ 0.006000] CPU: Processor Core ID: 0 [ 0.006000] mce: CPU supports 9 MCE banks [ 0.006000] CPU0: Thermal monitoring enabled (TM1) [ 0.006000] process: using mwait in idle threads [ 0.006000] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.006000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.006000] Spectre V2 : Vulnerable: Minimal generic ASM retpoline [ 0.006000] Freeing SMP alternatives memory: 28K [ 0.008000] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.008000] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.008000] core: CPU erratum AAJ80 worked around [ 0.008000] core: CPUID marked event: 'bus cycles' unavailable [ 0.008000] ... version: 3 [ 0.008000] ... bit width: 48 [ 0.008000] ... generic registers: 4 [ 0.008000] ... value mask: 0000ffffffffffff [ 0.008000] ... max period: 000000007fffffff [ 0.008000] ... fixed-purpose events: 3 [ 0.008000] ... event mask: 000000070000000f [ 0.008000] Hierarchical SRCU implementation. [ 0.008067] smp: Bringing up secondary CPUs ... [ 0.008364] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.008470] x86: Booting SMP configuration: [ 0.008471] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.019024] smp: Brought up 1 node, 8 CPUs [ 0.019024] smpboot: Max logical packages: 2 [ 0.019024] smpboot: Total of 8 processors activated (44940.65 BogoMIPS) [ 0.020334] devtmpfs: initialized [ 0.020334] x86/mm: Memory block size: 128MB [ 0.021217] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes) [ 0.021217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.021217] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.021322] NET: Registered protocol family 16 [ 0.021405] audit: initializing netlink subsys (disabled) [ 0.021411] audit: type=2000 audit(1518111592.021:1): state=initialized audit_enabled=0 res=1 [ 0.021411] cpuidle: using governor menu [ 0.021411] ACPI: bus type PCI registered [ 0.021411] PCI: Using configuration type 1 for base access [ 0.023040] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.023061] ACPI: Added _OSI(Module Device) [ 0.023062] ACPI: Added _OSI(Processor Device) [ 0.023062] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.023063] ACPI: Added _OSI(Processor Aggregator Device) [ 0.023236] ACPI: Executed 1 blocks of module-level executable AML code [ 0.035044] ACPI: Dynamic OEM Table Load: [ 0.035056] ACPI: SSDT 0xFFFF99D29595C000 00244C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.035150] ACPI: Dynamic OEM Table Load: [ 0.035155] ACPI: SSDT 0xFFFF99D295FBE800 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.035765] ACPI: EC: EC started [ 0.035766] ACPI: EC: interrupt blocked [ 0.035893] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.035895] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.035896] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions [ 0.035896] ACPI: Interpreter enabled [ 0.035918] ACPI: (supports S0 S1 S3 S4 S5) [ 0.035919] ACPI: Using IOAPIC for interrupt routing [ 0.035948] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.036183] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.045917] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.045921] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.046044] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.046231] PCI host bridge to bus 0000:00 [ 0.046233] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.046234] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.046236] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.046237] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.046238] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.046239] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window] [ 0.046240] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.046248] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000 [ 0.046361] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.046383] pci 0000:00:03.0: enabling Extended Tags [ 0.046410] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.046499] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.046608] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.046717] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.046823] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.046927] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.047028] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.047142] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.047162] pci 0000:00:1a.0: reg 0x10: [mem 0xf79fe000-0xf79fe3ff] [ 0.047238] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.047328] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.047344] pci 0000:00:1b.0: reg 0x10: [mem 0xf79f8000-0xf79fbfff 64bit] [ 0.047405] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.047487] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.047548] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.047638] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.047694] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.047781] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.047837] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.047926] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.047986] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.048079] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400 [ 0.048140] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.048229] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.048249] pci 0000:00:1d.0: reg 0x10: [mem 0xf79fd000-0xf79fd3ff] [ 0.048325] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.048411] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.048540] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100 [ 0.048718] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.048734] pci 0000:00:1f.2: reg 0x10: [io 0xa880-0xa887] [ 0.048741] pci 0000:00:1f.2: reg 0x14: [io 0xa800-0xa803] [ 0.048747] pci 0000:00:1f.2: reg 0x18: [io 0xa480-0xa487] [ 0.048753] pci 0000:00:1f.2: reg 0x1c: [io 0xa400-0xa403] [ 0.048760] pci 0000:00:1f.2: reg 0x20: [io 0xa080-0xa09f] [ 0.048766] pci 0000:00:1f.2: reg 0x24: [mem 0xf79f7000-0xf79f77ff] [ 0.048803] pci 0000:00:1f.2: PME# supported from D3hot [ 0.048885] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.048901] pci 0000:00:1f.3: reg 0x10: [mem 0xf79fc000-0xf79fc0ff 64bit] [ 0.048918] pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff] [ 0.049045] pci 0000:01:00.0: [1002:6899] type 00 class 0x030000 [ 0.049060] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.049068] pci 0000:01:00.0: reg 0x18: [mem 0xf7ac0000-0xf7adffff 64bit] [ 0.049074] pci 0000:01:00.0: reg 0x20: [io 0xb000-0xb0ff] [ 0.049085] pci 0000:01:00.0: reg 0x30: [mem 0xf7aa0000-0xf7abffff pref] [ 0.049091] pci 0000:01:00.0: enabling Extended Tags [ 0.049121] pci 0000:01:00.0: supports D1 D2 [ 0.049156] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300 [ 0.049170] pci 0000:01:00.1: reg 0x10: [mem 0xf7afc000-0xf7afffff 64bit] [ 0.049199] pci 0000:01:00.1: enabling Extended Tags [ 0.049228] pci 0000:01:00.1: supports D1 D2 [ 0.052019] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.052024] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.052028] pci 0000:00:03.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.052034] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.052112] pci 0000:06:00.0: [2646:0010] type 00 class 0x010601 [ 0.052177] pci 0000:06:00.0: reg 0x24: [mem 0xf7dff000-0xf7dfffff] [ 0.052187] pci 0000:06:00.0: reg 0x30: [mem 0xf7dc0000-0xf7ddffff pref] [ 0.052241] pci 0000:06:00.0: supports D1 [ 0.052242] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.055020] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.055027] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.055095] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.055135] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.055198] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601 [ 0.055285] pci 0000:03:00.0: reg 0x24: [mem 0xf7cfa000-0xf7cfbfff] [ 0.055350] pci 0000:03:00.0: PME# supported from D3hot [ 0.055408] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.055435] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07] [ 0.055447] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883] [ 0.055459] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807] [ 0.055472] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483] [ 0.055484] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f] [ 0.055591] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.055599] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.055602] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.055604] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.055657] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.055676] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.055702] pci 0000:02:00.0: reg 0x18: [mem 0xf6fff000-0xf6ffffff 64bit pref] [ 0.055718] pci 0000:02:00.0: reg 0x20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref] [ 0.055729] pci 0000:02:00.0: reg 0x30: [mem 0xf7bf0000-0xf7bfffff pref] [ 0.055792] pci 0000:02:00.0: supports D1 D2 [ 0.055793] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.059022] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.059027] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.059032] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.059039] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.059097] pci 0000:07:01.0: [13d0:2103] type 00 class 0x028000 [ 0.059114] pci 0000:07:01.0: reg 0x10: [mem 0xf7ef0000-0xf7efffff] [ 0.059122] pci 0000:07:01.0: reg 0x14: [io 0xec00-0xec1f] [ 0.059206] pci 0000:07:02.0: [12d8:e111] type 01 class 0x060400 [ 0.059251] pci 0000:07:02.0: enabling Extended Tags [ 0.059342] pci 0000:07:04.0: [1106:3044] type 00 class 0x0c0010 [ 0.059361] pci 0000:07:04.0: reg 0x10: [mem 0xf7eef000-0xf7eef7ff] [ 0.059370] pci 0000:07:04.0: reg 0x14: [io 0xe880-0xe8ff] [ 0.059435] pci 0000:07:04.0: supports D2 [ 0.059436] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold [ 0.059496] pci 0000:00:1e.0: PCI bridge to [bus 07-08] (subtractive decode) [ 0.059499] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.059501] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 0.059506] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.059507] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.059508] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.059509] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.059511] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 0.059512] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode) [ 0.059582] pci 0000:08:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.059631] pci 0000:08:00.0: reg 0x10: [mem 0xf7ffe000-0xf7ffffff 64bit] [ 0.059846] pci 0000:08:00.0: PME# supported from D0 D3hot [ 0.390042] pci 0000:07:02.0: PCI bridge to [bus 08] [ 0.390054] pci 0000:07:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.390107] pci_bus 0000:00: on NUMA node 0 [ 0.390784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.390848] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.390909] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.390972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.391038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.391103] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.391166] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.391230] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.391325] ACPI: EC: interrupt unblocked [ 0.391330] ACPI: EC: event unblocked [ 0.391336] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.391338] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.392012] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.392012] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.392012] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.392013] vgaarb: loaded [ 0.392074] SCSI subsystem initialized [ 0.392089] libata version 3.00 loaded. [ 0.392089] ACPI: bus type USB registered [ 0.392089] usbcore: registered new interface driver usbfs [ 0.392089] usbcore: registered new interface driver hub [ 0.392089] usbcore: registered new device driver usb [ 0.392090] EDAC MC: Ver: 3.0.0 [ 0.392114] PCI: Using ACPI for IRQ routing [ 0.392114] PCI: pci_cache_line_size set to 64 bytes [ 0.392114] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.392114] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff] [ 0.392192] NetLabel: Initializing [ 0.392192] NetLabel: domain hash size = 128 [ 0.392193] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.392210] NetLabel: unlabeled traffic allowed by default [ 0.392225] HPET: 8 timers in total, 6 timers will be used for per-cpu timer [ 0.392225] hpet: hpet2 irq 24 for MSI [ 0.392225] hpet: hpet3 irq 25 for MSI [ 0.392225] hpet: hpet4 irq 26 for MSI [ 0.392225] hpet: hpet5 irq 27 for MSI [ 0.392225] hpet: hpet6 irq 28 for MSI [ 0.392225] hpet: hpet7 irq 29 for MSI [ 0.392225] clocksource: Switched to clocksource hpet [ 0.402507] VFS: Disk quotas dquot_6.6.0 [ 0.402529] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404537] pnp: PnP ACPI init [ 0.404601] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.404605] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.404665] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.404870] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.404875] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405119] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.405121] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.405123] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.405124] system 00:03: [io 0x0600-0x0607] has been reserved [ 0.405126] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.405128] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.405129] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.405133] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405248] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.405252] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405473] pnp 00:05: [dma 0 disabled] [ 0.405525] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.405641] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.405643] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.405647] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405745] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.405749] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405947] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.405949] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.405950] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.405952] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.405953] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.405957] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.406112] pnp: PnP ACPI: found 9 devices [ 0.410644] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.410660] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.410662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.410669] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.410670] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.410672] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000 [ 0.410679] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.410681] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.410682] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.410689] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.410717] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.410719] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0200000-0xf03fffff] [ 0.410722] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.410724] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.410726] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.410729] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.410731] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.410733] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff] [ 0.410735] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff] [ 0.410738] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.410740] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.410743] pci 0000:00:03.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.410745] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.410749] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.410750] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.410754] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.410756] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.410760] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.410762] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.410766] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff] [ 0.410768] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.410772] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.410774] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 0.410777] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff] [ 0.410780] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.410784] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.410786] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.410789] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.410792] pci 0000:00:1c.6: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.410796] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.410798] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.410802] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.410804] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.410809] pci 0000:07:02.0: PCI bridge to [bus 08] [ 0.410814] pci 0000:07:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.410822] pci 0000:00:1e.0: PCI bridge to [bus 07-08] [ 0.410824] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.410827] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 0.410834] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.410835] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.410836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.410837] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.410838] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.410839] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window] [ 0.410840] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.410841] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.410842] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.410844] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.410845] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.410846] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.410847] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.410848] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.410849] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.410850] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.410851] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.410852] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.410853] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.410854] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.410855] pci_bus 0000:03: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.410856] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.410857] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.410858] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.410859] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.410861] pci_bus 0000:07: resource 1 [mem 0xf7e00000-0xf7ffffff] [ 0.410862] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.410863] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.410864] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.410865] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.410866] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.410867] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff window] [ 0.410868] pci_bus 0000:08: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.410962] NET: Registered protocol family 2 [ 0.411167] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.411316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.411580] TCP: Hash tables configured (established 65536 bind 65536) [ 0.411628] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.411678] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.411783] NET: Registered protocol family 1 [ 0.412236] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.412243] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.412246] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.412526] PCI: CLS 32 bytes, default 64 [ 0.412564] Trying to unpack rootfs image as initramfs... [ 1.189790] Freeing initrd memory: 6928K [ 1.189794] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.189796] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [00000000caa13807-00000000a1ae6066] [ 1.190681] Initialise system trusted keyrings [ 1.190737] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.190942] SELinux: Registering netfilter hooks [ 1.191469] NET: Registered protocol family 38 [ 1.191470] Key type asymmetric registered [ 1.191471] Asymmetric key parser 'x509' registered [ 1.191485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.191523] io scheduler noop registered [ 1.191524] io scheduler deadline registered [ 1.191549] io scheduler cfq registered (default) [ 1.191550] io scheduler mq-deadline registered [ 1.191551] io scheduler kyber registered [ 1.191804] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.191920] pcieport 0000:00:1c.4: enabling device (0104 -> 0107) [ 1.192058] pcieport 0000:00:1c.5: enabling device (0104 -> 0107) [ 1.192468] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.213029] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.213365] Linux agpgart interface v0.103 [ 1.213428] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.213429] vesafb: scrolling: redraw [ 1.213430] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.213436] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 1.213443] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000439e8778, using 5824k, total 5824k [ 1.400868] Console: switching to colour frame buffer device 175x65 [ 1.579599] fb0: VESA VGA frame buffer device [ 1.579613] intel_idle: MWAIT substates: 0x1120 [ 1.579614] intel_idle: v0.4.1 model 0x1E [ 1.579894] intel_idle: lapic_timer_reliable_states 0x2 [ 1.579901] ipmi message handler version 39.2 [ 1.579904] IPMI System Interface driver. [ 1.579928] ipmi_si: Unable to find any System Interface(s) [ 1.580778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.580787] ACPI: Power Button [PWRB] [ 1.580817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.580847] ACPI: Power Button [PWRF] [ 1.584695] brd: module loaded [ 1.586839] loop: module loaded [ 1.587054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.587057] ehci-pci: EHCI PCI platform driver [ 1.587173] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.587239] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.587250] ehci-pci 0000:00:1a.0: debug port 2 [ 1.591160] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported [ 1.591172] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf79fe000 [ 1.598102] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.598191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.598195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.598197] usb usb1: Product: EHCI Host Controller [ 1.598200] usb usb1: Manufacturer: Linux 4.15.2-gentoo ehci_hcd [ 1.598202] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.598529] hub 1-0:1.0: USB hub found [ 1.598544] hub 1-0:1.0: 2 ports detected [ 1.598767] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.598911] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.598928] ehci-pci 0000:00:1d.0: debug port 2 [ 1.602854] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported [ 1.602865] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf79fd000 [ 1.609108] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.609194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.609197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.609200] usb usb2: Product: EHCI Host Controller [ 1.609202] usb usb2: Manufacturer: Linux 4.15.2-gentoo ehci_hcd [ 1.609204] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.609520] hub 2-0:1.0: USB hub found [ 1.609533] hub 2-0:1.0: 2 ports detected [ 1.609648] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.609652] ohci-pci: OHCI PCI platform driver [ 1.609659] uhci_hcd: USB Universal Host Controller Interface driver [ 1.609692] i8042: PNP: No PS/2 controller found. [ 1.609692] i8042: Probing ports directly. [ 1.612702] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.612706] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.612925] mousedev: PS/2 mouse device common for all mice [ 1.613329] rtc_cmos 00:01: RTC can wake from S4 [ 1.613548] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.613581] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.613621] hidraw: raw HID events driver (C) Jiri Kosina [ 1.613671] usbcore: registered new interface driver usbhid [ 1.613672] usbhid: USB HID core driver [ 1.613713] drop_monitor: Initializing network drop monitor service [ 1.613781] Initializing XFRM netlink socket [ 1.613785] NET: Registered protocol family 17 [ 1.615146] microcode: sig=0x106e5, pf=0x2, revision=0x4 [ 1.615444] microcode: Microcode Update Driver: v2.2. [ 1.615466] sched_clock: Marking stable (1615432393, 0)->(1826358820, -210926427) [ 1.616110] registered taskstats version 1 [ 1.616111] Loading compiled-in X.509 certificates [ 1.629373] Loaded X.509 cert 'Build time autogenerated kernel key: 5b42225012132caba92e8db315df5ef0e7fe4a45' [ 1.629384] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.640456] rtc_cmos 00:01: setting system clock to 2018-02-08 17:39:54 UTC (1518111594) [ 1.641874] Freeing unused kernel memory: 1216K [ 1.641875] Write protecting the kernel read-only data: 16384k [ 1.643126] Freeing unused kernel memory: 2012K [ 1.646134] Freeing unused kernel memory: 1076K [ 1.921122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.929116] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.051493] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.051495] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.051780] hub 1-1:1.0: USB hub found [ 2.051859] hub 1-1:1.0: 6 ports detected [ 2.057491] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.057493] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.057623] hub 2-1:1.0: USB hub found [ 2.057788] hub 2-1:1.0: 8 ports detected [ 2.099751] scsi host0: pata_jmicron [ 2.099847] scsi host1: pata_jmicron [ 2.099887] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [ 2.099888] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [ 2.207085] tsc: Refined TSC clocksource calibration: 2808.714 MHz [ 2.207334] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x287c6876210, max_idle_ns: 440795206608 ns [ 2.335113] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 2.413600] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.413602] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.413603] usb 2-1.1: Product: USB 2.0 Hub [ 2.413878] hub 2-1.1:1.0: USB hub found [ 2.413975] hub 2-1.1:1.0: 4 ports detected [ 2.480013] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 2.495723] ahci 0000:00:1f.2: version 3.0 [ 2.495908] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.506097] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.506102] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst [ 2.521852] scsi host2: ahci [ 2.521965] scsi host3: ahci [ 2.522145] scsi host4: ahci [ 2.522266] scsi host5: ahci [ 2.522371] scsi host6: ahci [ 2.522475] scsi host7: ahci [ 2.522527] ata3: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7100 irq 30 [ 2.522529] ata4: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7180 irq 30 [ 2.522530] ata5: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7200 irq 30 [ 2.522532] ata6: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7280 irq 30 [ 2.522534] ata7: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7300 irq 30 [ 2.522536] ata8: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7380 irq 30 [ 2.532902] ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.532906] ahci 0000:06:00.0: flags: 64bit ncq only pio [ 2.533219] scsi host8: ahci [ 2.533273] ata9: SATA max UDMA/133 abar m4096@0xf7dff000 port 0xf7dff100 irq 31 [ 2.543548] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.543553] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio [ 2.543844] scsi host9: ahci [ 2.543964] scsi host10: ahci [ 2.544035] ata10: SATA max UDMA/133 abar m8192@0xf7cfa000 port 0xf7cfa100 irq 18 [ 2.544038] ata11: SATA max UDMA/133 abar m8192@0xf7cfa000 port 0xf7cfa180 irq 18 [ 2.563441] usb 2-1.2: New USB device found, idVendor=0557, idProduct=0204 [ 2.563445] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.563448] usb 2-1.2: Product: UC-100KMA [ 2.566947] input: UC-100KMA as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0557:0204.0001/input/input5 [ 2.618299] hid-generic 0003:0557:0204.0001: input,hidraw0: USB HID v1.00 Keyboard [UC-100KMA] on usb-0000:00:1d.0-1.2/input0 [ 2.620881] input: UC-100KMA as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0557:0204.0002/input/input6 [ 2.620979] hid-generic 0003:0557:0204.0002: input,hidraw1: USB HID v1.00 Mouse [UC-100KMA] on usb-0000:00:1d.0-1.2/input1 [ 2.685103] usb 2-1.5: new high-speed USB device number 5 using ehci-pci [ 2.764302] usb 2-1.5: New USB device found, idVendor=2040, idProduct=0265 [ 2.764306] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.764309] usb 2-1.5: Product: dualHD [ 2.764311] usb 2-1.5: Manufacturer: HCW [ 2.764313] usb 2-1.5: SerialNumber: 0013963290 [ 2.839115] usb 2-1.1.2: new high-speed USB device number 6 using ehci-pci [ 2.845623] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.850962] ata9.00: ATA-8: Kingston SHPM2280P2H/240G, 0C4005T2, max UDMA/133 [ 2.850965] ata9.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.854141] ata11: SATA link down (SStatus 0 SControl 300) [ 2.856363] ata9.00: configured for UDMA/133 [ 2.943902] usb 2-1.1.2: New USB device found, idVendor=03f0, idProduct=0b01 [ 2.943907] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.943909] usb 2-1.1.2: Product: hp scanjet 8200 [ 2.943912] usb 2-1.1.2: Manufacturer: hp [ 2.943914] usb 2-1.1.2: SerialNumber: CN4BMT007672 [ 2.983051] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.989145] ata3.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133 [ 2.989148] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.993261] usb 2-1.6: new high-speed USB device number 7 using ehci-pci [ 2.995342] ata3.00: configured for UDMA/133 [ 2.995756] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD203WI 0003 PQ: 0 ANSI: 5 [ 3.007066] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.010152] ata10.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100 [ 3.013988] ata10.00: configured for UDMA/100 [ 3.073117] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0608 [ 3.073121] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.073124] usb 2-1.6: Product: USB2.0 Hub [ 3.073571] hub 2-1.6:1.0: USB hub found [ 3.073916] hub 2-1.6:1.0: 4 ports detected [ 3.140057] usb 2-1.7: new full-speed USB device number 8 using ehci-pci [ 3.215373] clocksource: Switched to clocksource tsc [ 3.273463] usb 2-1.7: New USB device found, idVendor=0644, idProduct=0000 [ 3.273467] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.273470] usb 2-1.7: Product: TEAC FD-05PUW [ 3.273472] usb 2-1.7: Manufacturer: TEAC [ 3.341153] usb 2-1.8: new high-speed USB device number 9 using ehci-pci [ 3.440803] usb 2-1.8: New USB device found, idVendor=057c, idProduct=8403 [ 3.440807] usb 2-1.8: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.440810] usb 2-1.8: Product: FRITZ!WLAN N2.4 [ 3.440812] usb 2-1.8: Manufacturer: AVM Berlin [ 3.440815] usb 2-1.8: SerialNumber: BD965 [ 3.463022] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.464950] ata4.00: supports DRM functions and may not be fully accessible [ 3.470005] ata4.00: disabling queued TRIM support [ 3.470009] ata4.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133 [ 3.470011] ata4.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.475467] ata4.00: supports DRM functions and may not be fully accessible [ 3.480526] ata4.00: disabling queued TRIM support [ 3.485759] ata4.00: configured for UDMA/133 [ 3.485993] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5 [ 3.504076] usb 2-1.6.1: new low-speed USB device number 10 using ehci-pci [ 3.511378] random: crng init done [ 3.588778] usb 2-1.6.1: New USB device found, idVendor=046d, idProduct=c408 [ 3.588782] usb 2-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.588785] usb 2-1.6.1: Product: USB Trackball [ 3.588787] usb 2-1.6.1: Manufacturer: Logitech [ 3.592538] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:046D:C408.0003/input/input7 [ 3.592847] hid-generic 0003:046D:C408.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.6.1/input0 [ 3.959007] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.960030] ata5.00: ATA-8: ST3500412AS, CC32, max UDMA/133 [ 3.960032] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.961250] ata5.00: configured for UDMA/133 [ 3.961419] scsi 4:0:0:0: Direct-Access ATA ST3500412AS CC32 PQ: 0 ANSI: 5 [ 4.431099] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.435109] ata6.00: ATAPI: ASUS BW-16D1HT, 1.01, max UDMA/100 [ 4.436200] ata6.00: configured for UDMA/100 [ 4.449707] scsi 5:0:0:0: CD-ROM ASUS BW-16D1HT 1.01 PQ: 0 ANSI: 5 [ 4.943099] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.948975] ata7.00: ATA-8: ST1000DM005 HD103SJ, 1AJ10001, max UDMA/133 [ 4.948979] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.954932] ata7.00: configured for UDMA/133 [ 4.955391] scsi 6:0:0:0: Direct-Access ATA ST1000DM005 HD10 0001 PQ: 0 ANSI: 5 [ 5.423098] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.425012] ata8.00: supports DRM functions and may not be fully accessible [ 5.425538] ata8.00: disabling queued TRIM support [ 5.425541] ata8.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 [ 5.425544] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 5.426379] ata8.00: supports DRM functions and may not be fully accessible [ 5.426823] ata8.00: disabling queued TRIM support [ 5.427340] ata8.00: configured for UDMA/133 [ 5.427689] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 5.428436] scsi 8:0:0:0: Direct-Access ATA Kingston SHPM228 05T2 PQ: 0 ANSI: 5 [ 5.432073] scsi 9:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5 [ 5.470152] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.470167] sd 2:0:0:0: [sda] Write Protect is off [ 5.470169] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.470188] sd 3:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 5.470194] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.470203] sd 3:0:0:0: [sdb] Write Protect is off [ 5.470205] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.470225] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.470236] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.470240] sd 4:0:0:0: [sdc] Write Protect is off [ 5.470242] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.470268] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.470439] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.470453] sd 6:0:0:0: [sdd] Write Protect is off [ 5.470455] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.470480] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.470755] sd 7:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 5.470772] sd 7:0:0:0: [sde] Write Protect is off [ 5.470774] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.470801] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.470860] sd 8:0:0:0: [sdf] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 5.470862] sd 8:0:0:0: [sdf] 4096-byte physical blocks [ 5.470876] sd 8:0:0:0: [sdf] Write Protect is off [ 5.470878] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.470903] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.471279] sde: sde1 [ 5.471333] sdf: sdf1 sdf2 [ 5.471594] sd 7:0:0:0: [sde] Attached SCSI disk [ 5.471664] sd 8:0:0:0: [sdf] Attached SCSI disk [ 5.472496] sdb: sdb1 [ 5.472684] sda: sda1 sda2 [ 5.472802] sd 3:0:0:0: [sdb] Attached SCSI disk [ 5.472978] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.479474] sdd: sdd1 sdd2 [ 5.479767] sd 6:0:0:0: [sdd] Attached SCSI disk [ 5.551283] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 > [ 5.551975] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.555151] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 5.555192] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 5.555237] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 5.555283] scsi 5:0:0:0: Attached scsi generic sg3 type 5 [ 5.555321] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 5.555360] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 5.555406] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 5.555449] scsi 9:0:0:0: Attached scsi generic sg7 type 5 [ 5.578017] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.578019] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.578161] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 5.597870] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.598005] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 5.811589] imm: Version 2.05 (for Linux 2.4.0) [ 5.899028] Fusion MPT base driver 3.04.20 [ 5.899029] Copyright (c) 1999-2008 LSI Corporation [ 5.904736] Fusion MPT SPI Host driver 3.04.20 [ 5.909519] Fusion MPT FC Host driver 3.04.20 [ 5.915140] Fusion MPT SAS Host driver 3.04.20 [ 5.918945] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 5.921945] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 5.924774] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 5.958216] Adaptec aacraid driver 1.2.1[50834]-custom [ 5.967975] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.969426] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.975056] megasas: 07.703.05.00-rc1 [ 5.988773] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.02-k. [ 6.003188] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.4 [ 6.003189] Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. [ 6.011801] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.025013] mpt3sas version 17.100.00.00 loaded [ 6.071135] usb-storage 2-1.7:1.0: USB Mass Storage device detected [ 6.071212] scsi host11: usb-storage 2-1.7:1.0 [ 6.071305] usbcore: registered new interface driver usb-storage [ 6.095051] xhci_hcd 0000:08:00.0: Resetting [ 6.195593] hrtimer: interrupt took 69380352 ns [ 6.195594] hrtimer: interrupt took 69380936 ns [ 7.105096] xhci_hcd 0000:08:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 7.144645] scsi 11:0:0:0: Direct-Access TEAC FD-05PUW 3000 PQ: 0 ANSI: 0 CCS [ 7.144912] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 7.176718] sd 11:0:0:0: Power-on or device reset occurred [ 7.241294] sd 11:0:0:0: [sdg] Attached SCSI removable disk [ 8.425208] xhci_hcd 0000:08:00.0: not ready 1123ms after FLR; waiting [ 9.513188] xhci_hcd 0000:08:00.0: not ready 2147ms after FLR; waiting [ 11.625209] xhci_hcd 0000:08:00.0: not ready 4195ms after FLR; waiting [ 15.849217] xhci_hcd 0000:08:00.0: not ready 8291ms after FLR; waiting [ 24.553210] xhci_hcd 0000:08:00.0: not ready 16483ms after FLR; waiting [ 41.449223] xhci_hcd 0000:08:00.0: not ready 32867ms after FLR; waiting [ 74.729207] xhci_hcd 0000:08:00.0: not ready 65635ms after FLR; giving up [ 75.012189] xhci_hcd 0000:08:00.0: Refused to change power state, currently in D3 [ 75.062545] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 75.062622] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 75.303918] CE: hpet increased min_delta_ns to 20115 nsec [ 75.324026] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 20.105 msecs [ 75.324027] xhci_hcd 0000:08:00.0: Host halt failed, -19 [ 75.324028] xhci_hcd 0000:08:00.0: can't setup: -19 [ 75.324031] xhci_hcd 0000:08:00.0: USB bus 3 deregistered [ 75.344240] xhci_hcd 0000:08:00.0: init 0000:08:00.0 fail, -19 [ 75.541930] device-mapper: uevent: version 1.0.3 [ 75.541985] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 75.575918] xor: measuring software checksum speed [ 75.585054] prefetch64-sse: 11784.000 MB/sec [ 75.595054] generic_sse: 10240.000 MB/sec [ 75.595055] xor: using function: prefetch64-sse (11784.000 MB/sec) [ 75.596892] async_tx: api initialized (async) [ 75.605895] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 75.633071] raid6: sse2x1 gen() 6609 MB/s [ 75.650062] raid6: sse2x1 xor() 5025 MB/s [ 75.667069] raid6: sse2x2 gen() 7648 MB/s [ 75.684090] raid6: sse2x2 xor() 5867 MB/s [ 75.701068] raid6: sse2x4 gen() 8570 MB/s [ 75.718089] raid6: sse2x4 xor() 6654 MB/s [ 75.718090] raid6: using algorithm sse2x4 gen() 8570 MB/s [ 75.718091] raid6: .... xor() 6654 MB/s, rmw enabled [ 75.718091] raid6: using ssse3x2 recovery algorithm [ 75.726774] device-mapper: raid: Loading target version 1.13.0 [ 75.959780] Btrfs loaded, crc32c=crc32c-generic [ 75.975042] JFS: nTxBlock = 8192, nTxLock = 65536 [ 75.980073] FS-Cache: Loaded [ 75.989774] RPC: Registered named UNIX socket transport module. [ 75.989775] RPC: Registered udp transport module. [ 75.989776] RPC: Registered tcp transport module. [ 75.989776] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 76.001431] FS-Cache: Netfs 'nfs' registered for caching [ 76.031754] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 76.051149] fuse init (API version 7.26) [ 76.062024] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 76.161033] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 76.161035] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 76.168653] dca service started, version 1.12.1 [ 76.169925] pps_core: LinuxPPS API ver. 1 registered [ 76.169926] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 76.171257] PTP clock support registered [ 76.176075] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 76.176076] igb: Copyright (c) 2007-2014 Intel Corporation. [ 76.180498] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 76.184164] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 76.184510] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x00000000229c959e, 48:5b:39:02:41:82, XID 083000c0 IRQ 32 [ 76.184513] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 76.188901] sky2: driver version 1.30 [ 76.203057] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [ 76.216766] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 76.222269] vxge: Copyright(c) 2002-2010 Exar Corp. [ 76.222270] vxge: Driver version: 2.5.3.22640-k [ 76.246949] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 76.264162] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 76.264163] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 76.268169] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 76.268170] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 77.115370] EXT2-fs (sdc3): error: couldn't mount because of unsupported optional features (240) [ 77.115752] EXT4-fs (sdc3): couldn't mount as ext3 due to feature incompatibilities [ 77.179236] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 87.095745] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 87.282156] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 87.282161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 87.282164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20170831/utaddress-247) [ 87.282166] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 87.282169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 87.282170] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20170831/utaddress-247) [ 87.282172] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 87.282175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 87.282194] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 87.284267] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 87.298029] ATK0110 ATK0110:00: EC enabled [ 87.298107] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 87.541026] firewire_ohci 0000:07:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 87.685529] Error: Driver 'pcspkr' is already registered, aborting... [ 87.720477] iTCO_vendor_support: vendor-support=0 [ 87.767612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 87.767644] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860) [ 87.767748] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 87.958829] pktcdvd: pktcdvd0: writer mapped to sr1 [ 87.981919] pktcdvd: pktcdvd1: writer mapped to sr0 [ 88.047259] firewire_core 0000:07:04.0: created device fw0: GUID 001e8c0000cafb0e, S400 [ 88.132235] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 88.177352] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 88.214880] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9 [ 88.314781] [drm] radeon kernel modesetting enabled. [ 88.314826] checking generic (e0000000 5b0000) vs hw (e0000000 10000000) [ 88.314826] fb: switching to radeondrmfb from VESA VGA [ 88.314852] Console: switching to colour dummy device 80x25 [ 88.315162] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1682:0x2972 0x00). [ 88.315200] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 88.315203] caller pci_map_rom+0x58/0xf0 mapping multiple BARs [ 88.315222] ATOM BIOS: CYPRESS [ 88.315301] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 88.315302] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 88.315305] [drm] Detected VRAM RAM=1024M, BAR=256M [ 88.315306] [drm] RAM width 256bits DDR [ 88.315357] [TTM] Zone kernel: Available graphics memory: 4077382 kiB [ 88.315357] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 88.315358] [TTM] Initializing pool allocator [ 88.315363] [TTM] Initializing DMA pool allocator [ 88.315380] [drm] radeon: 1024M of VRAM memory ready [ 88.315382] [drm] radeon: 1024M of GTT memory ready. [ 88.315391] [drm] Loading CYPRESS Microcode [ 88.607783] [drm] Internal thermal controller with fan control [ 88.631228] [drm] radeon: dpm initialized [ 88.741431] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1828S: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line [ 88.741433] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 88.741434] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0) [ 88.741435] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 88.741436] snd_hda_codec_via hdaudioC0D0: dig-out=0x2d/0x2e [ 88.741437] snd_hda_codec_via hdaudioC0D0: inputs: [ 88.741439] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29 [ 88.741440] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b [ 88.741441] snd_hda_codec_via hdaudioC0D0: Line=0x2a [ 88.741442] snd_hda_codec_via hdaudioC0D0: CD=0x2c [ 88.751214] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 88.751653] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 88.751754] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 88.751852] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 88.751949] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 88.752034] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 88.752118] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 88.752197] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 88.752279] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 88.778689] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 88.779718] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 88.795816] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 88.795946] radeon 0000:01:00.0: WB enabled [ 88.795948] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000026c2a243 [ 88.795950] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000d72ca24b [ 88.796371] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000b55dd3a7 [ 88.796373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 88.796373] [drm] Driver supports precise vblank timestamp query. [ 88.796374] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 88.796409] radeon 0000:01:00.0: radeon: using MSI. [ 88.796434] [drm] radeon: irq initialized. [ 88.813284] [drm] ring test on 0 succeeded in 1 usecs [ 88.813291] [drm] ring test on 3 succeeded in 3 usecs [ 88.839957] Linux video capture interface: v2.00 [ 88.990393] [drm] ring test on 5 succeeded in 1 usecs [ 88.990398] [drm] UVD initialized successfully. [ 88.990650] [drm] ib test on ring 0 succeeded in 0 usecs [ 88.990687] [drm] ib test on ring 3 succeeded in 0 usecs [ 89.001646] em28xx 2-1.5:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0) [ 89.001648] em28xx 2-1.5:1.0: DVB interface 0 found: isoc [ 89.001724] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 89.001810] em28xx 2-1.5:1.0: chip ID is em28174 [ 89.004086] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 89.004113] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 89.004114] cfg80211: failed to load regulatory.db [ 89.647103] [drm] ib test on ring 5 succeeded [ 89.647516] [drm] Radeon Display Connectors [ 89.647517] [drm] Connector 0: [ 89.647518] [drm] DP-1 [ 89.647518] [drm] HPD4 [ 89.647519] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 89.647519] [drm] Encoders: [ 89.647520] [drm] DFP1: INTERNAL_UNIPHY2 [ 89.647521] [drm] Connector 1: [ 89.647521] [drm] HDMI-A-1 [ 89.647521] [drm] HPD5 [ 89.647522] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 89.647523] [drm] Encoders: [ 89.647523] [drm] DFP2: INTERNAL_UNIPHY2 [ 89.647524] [drm] Connector 2: [ 89.647524] [drm] DVI-I-1 [ 89.647524] [drm] HPD1 [ 89.647525] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 89.647526] [drm] Encoders: [ 89.647526] [drm] DFP3: INTERNAL_UNIPHY1 [ 89.647527] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 89.647527] [drm] Connector 3: [ 89.647527] [drm] DVI-I-2 [ 89.647528] [drm] HPD6 [ 89.647529] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 89.647529] [drm] Encoders: [ 89.647530] [drm] DFP4: INTERNAL_UNIPHY [ 89.647530] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 89.742513] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 89.761808] [drm] fb mappable at 0xE034D000 [ 89.761809] [drm] vram apper at 0xE0000000 [ 89.761810] [drm] size 8294400 [ 89.761810] [drm] fb depth is 24 [ 89.761811] [drm] pitch is 7680 [ 89.761935] fbcon: radeondrmfb (fb0) is primary device [ 89.783090] Console: switching to colour frame buffer device 240x67 [ 89.787774] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 89.793150] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 90.003153] usb 2-1.8: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 90.003227] usbcore: registered new interface driver ath9k_htc [ 90.146560] em28xx 2-1.5:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcbdccbc8 [ 90.146564] em28xx 2-1.5:1.0: EEPROM info: [ 90.146566] em28xx 2-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 90.154391] em28xx 2-1.5:1.0: AC97 audio (5 sample rates) [ 90.154394] em28xx 2-1.5:1.0: 500mA max power [ 90.154398] em28xx 2-1.5:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 90.154459] em28xx 2-1.5:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 90.155584] tveeprom: Hauppauge model 204109, rev B3I6, serial# 13963290 [ 90.155587] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 90.155589] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 90.155590] tveeprom: audio processor is None (idx 0) [ 90.155592] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 90.155595] em28xx 2-1.5:1.0: dvb set to isoc mode. [ 90.155649] usbcore: registered new interface driver em28xx [ 90.229797] em28xx 2-1.5:1.0: Binding DVB extension [ 90.378293] usb 2-1.8: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 90.437535] i2c i2c-10: Added multiplexed i2c bus 11 [ 90.437537] si2168 10-0064: Silicon Labs Si2168-B40 successfully identified [ 90.437538] si2168 10-0064: firmware version: B 4.0.2 [ 90.630766] ath9k_htc 2-1.8:1.0: ath9k_htc: HTC initialized with 33 credits [ 90.759636] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 90.759653] dvbdev: DVB: registering new adapter (2-1.5:1.0) [ 90.759656] em28xx 2-1.5:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 90.759896] em28xx 2-1.5:1.0: DVB extension successfully initialized [ 90.759898] em28xx: Registered (Em28xx dvb Extension) extension [ 90.912988] ath9k_htc 2-1.8:1.0: ath9k_htc: FW Version: 1.4 [ 90.913014] ath9k_htc 2-1.8:1.0: FW RMW support: On [ 90.913016] ath: EEPROM regdomain: 0x8114 [ 90.913016] ath: EEPROM indicates we should expect a country code [ 90.913017] ath: doing EEPROM country->regdmn map search [ 90.913018] ath: country maps to regdmn code: 0x37 [ 90.913019] ath: Country alpha2 being used: DE [ 90.913019] ath: Regpair used: 0x37 [ 90.956267] ieee80211 phy0: Atheros AR9271 Rev:1 [ 90.976550] em28xx 2-1.5:1.0: Registering input extension [ 91.013027] Registered IR keymap rc-hauppauge [ 91.013425] rc rc0: 2-1.5:1.0 IR as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0 [ 91.013460] input: 2-1.5:1.0 IR as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0/input19 [ 91.013519] em28xx 2-1.5:1.0: Input extension successfully initialized [ 91.013521] em28xx: Registered (Em28xx Input Extension) extension [ 91.139286] ath9k_htc 2-1.8:1.0 wlp0s29u1u8: renamed from wlan0 [ 95.519642] EXT4-fs (sdc3): re-mounted. Opts: (null) [ 95.853372] Adding 8000364k swap on /dev/sdc2. Priority:-2 extents:1 across:8000364k [ 100.332855] Bluetooth: Core ver 2.22 [ 100.332866] NET: Registered protocol family 31 [ 100.332867] Bluetooth: HCI device and connection manager initialized [ 100.332870] Bluetooth: HCI socket layer initialized [ 100.332871] Bluetooth: L2CAP socket layer initialized [ 100.332877] Bluetooth: SCO socket layer initialized [ 100.801967] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 100.801968] Bluetooth: BNEP filters: protocol multicast [ 100.801971] Bluetooth: BNEP socket layer initialized [ 102.446228] 8021q: 802.1Q VLAN Support v1.8 [ 103.754449] r8169 0000:02:00.0 enp2s0: link down [ 103.754542] 8021q: adding VLAN 0 to HW filter on device bond0 [ 104.850578] wlp0s29u1u8: authenticate with d4:21:22:b4:aa:23 [ 105.098159] wlp0s29u1u8: send auth to d4:21:22:b4:aa:23 (try 1/3) [ 105.102654] wlp0s29u1u8: authenticated [ 105.103070] wlp0s29u1u8: associate with d4:21:22:b4:aa:23 (try 1/3) [ 105.110770] wlp0s29u1u8: RX AssocResp from d4:21:22:b4:aa:23 (capab=0x411 status=0 aid=2) [ 105.119041] wlp0s29u1u8: associated [ 111.978887] NET: Registered protocol family 10 [ 111.979145] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 111.979179] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 111.979257] Segment Routing with IPv6